In this Annual Report on Form 10-K, “Sypris,” “the Company,” “we,” “us” and “our” refer to Sypris Solutions, Inc. and its subsidiaries and predecessors, collectively. “Sypris Solutions” and “Sypris” are our trademarks. All other trademarks, servicemarks or trade names referred to in this Annual Report on Form 10-K are the property of their respective owners.

Forward-Looking Statements

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements made by or on behalf of Sypris Solutions, Inc. (“Sypris”, the “Company”, “we”, “our”, or “us”). These statements are based on management's beliefs, as well as assumptions made by and information currently available to management. Forward-looking statements may be identified by words like “expect,” “anticipate,” “believe,” “plan,” “project,” “could,” “estimate,” “intend,” “may,” “will”, “in our view” and similar expressions, or the negative of such terms, or other comparable terminology. All forward-looking statements involve risks and uncertainties that are difficult to predict. In particular, any statement contained in this Annual Report on Form 10-K or in other documents filed with the Securities and Exchange Commission, in press releases, or in the Company's communications and discussions with investors and analysts in the normal course of business through meetings, phone calls, or conference calls regarding, among other things, the consummation and benefits of transactions, joint ventures, business combinations, divestitures and acquisitions, expectations with respect to future sales, financial performance, operating efficiencies, or product expansion, are subject to known and unknown risks, uncertainties, and contingencies, many of which are beyond the control of the Company. Various factors may cause actual results, performance, or achievements to differ materially from anticipated results, performance, or achievements expressed or implied by forward-looking statements. Briefly, we currently believe that such risks also include the following: the impact of the current coronavirus disease (“COVID-19”) and economic conditions on our future operations; possible public policy response to the pandemic, including legislation or restrictions that may impact our operations or supply chain; our failure to successfully complete final contract negotiations with regard to our announced contract “orders”, “wins” or “awards”; our failure to successfully win new business; the termination or non-renewal of existing contracts by customers; our failure to achieve and maintain profitability on a timely basis by steadily increasing our revenues from profitable contracts with a diversified group of customers, which would cause us to continue to use existing cash resources or require us to sell assets to fund operating losses; breakdowns, relocations or major repairs of machinery and equipment, especially in our Toluca Plant; the cost, quality, timeliness, efficiency and yield of our operations and capital investments, including the impact of tariffs, product recalls or related liabilities, employee training, working capital, production schedules, cycle times, scrap rates, injuries, wages, overtime costs, freight or expediting costs; dependence on, retention or recruitment of key employees and distribution of our human capital; disputes or litigation involving governmental, supplier, customer, employee, creditor, stockholder, product liability, warranty or environmental claims; our failure to achieve targeted gains and cash proceeds from the anticipated sale of certain equipment and other assets; the fees, costs and supply of, or access to, debt, equity capital, or other sources of liquidity; our ability to comply with the requirements of the SBA and seek forgiveness of all or a portion of the PPP Loan; our inability to develop new or improved products or new markets for our products; cost, quality and availability or lead times of raw materials such as steel, component parts (especially electronic components), natural gas or utilities; our ability to maintain compliance with the NASDAQ listing standards minimum closing bid price; our reliance on a few key customers, third party vendors and sub-suppliers; inventory valuation risks including excessive or obsolescent valuations or price erosions of raw materials or component parts on hand or other potential impairments, non-recoverability or write-offs of assets or deferred costs; potential weaknesses in internal controls over financial reporting and enterprise risk management; failure to adequately insure or to identify product liability, environmental or other insurable risks; unanticipated or uninsured disasters, public health crises, losses or business risks; unanticipated or uninsured product liability claims; volatility of our customers’ forecasts, scheduling demands and production levels which negatively impact our operational capacity and our effectiveness to integrate new customers or suppliers, and in turn cause increases in our inventory and working capital levels; the costs of compliance with our auditing, regulatory or contractual obligations; labor relations; strikes; union negotiations; pension valuation, health care or other benefit costs; costs associated with environmental claims relating to properties previously owned; our inability to patent or otherwise protect our inventions or other intellectual property from potential competitors; adverse impacts of new technologies or other competitive pressures which increase our costs or erode our margins; U.S. government spending on products and services that Sypris Electronics provides, including the timing of budgetary decisions; changes in licenses, security clearances, or other legal rights to operate, manage our work force or import and export as needed; risks of foreign operations; currency exchange rates; war, terrorism, or political uncertainty; cyber security threats and disruptions; inaccurate data about markets, customers or business conditions; risks related to owning our common stock, including increased volatility; or unknown risks and uncertainties. We undertake no obligation to update our forward-looking statements, except as may be required by law.

PART I

General

We were formed as a Delaware corporation in 1997. We are a diversified provider of truck components, oil and gas pipeline components and aerospace and defense electronics. We produce a wide range of manufactured products, often under multi-year, sole-source contracts.

We focus on those markets where we believe we have the expertise, qualifications and leadership position to sustain a competitive advantage. We target our resources to support the needs of industry participants that embrace multi-year contractual relationships as a strategic component of their supply chain management. These contracts, many of which are sole-source by part number, historically have created opportunities to invest in leading-edge processes or technologies to help our customers remain competitive. The productivity and innovation that can result from such investments helps to differentiate us from our competition when it comes to cost, quality, reliability and customer service.

Our manufacturing processes frequently involve the fabrication or assembly of a product or subassembly according to specifications provided by our customers. We strive to enhance our manufacturing capabilities by advanced quality and manufacturing techniques, lean manufacturing, just-in-time procurement and continuous flow manufacturing, six sigma, total quality management, stringent and real-time engineering change control routines and total cycle time reduction techniques. At the same time, we are working to develop new designs and product innovations by re-engineering traditional solutions to eliminate cost without reducing durability or quality.

Business Division Summary

We are organized into two business segments, Sypris Technologies and Sypris Electronics. Sypris Technologies, which is comprised of Sypris Technologies, Inc. and its subsidiaries, generates revenue primarily from the sale of forged, machined, welded and heat-treated steel components primarily for the heavy commercial vehicle and high-pressure energy pipeline applications. Sypris Electronics, which is comprised of Sypris Electronics, LLC, is focused on circuit card and full “box build” manufacturing, high reliability manufacturing, systems assembly and integration, design for manufacturability and design to specification work.

Sypris Technologies. Through Sypris Technologies, we are a significant supplier of forged and machined components, serving the commercial vehicle, off highway vehicle, recreational vehicle, automotive, industrial and energy markets in North America. We have the capacity to produce drive train components including axle shafts, transmission shafts, gear sets, steer axle knuckles, and other components for ultimate use by the leading automotive, truck and recreational vehicle manufacturers, including General Motors Company (GM), Freightliner LLC (Freightliner), Mack Truck (Mack), Navistar International Corporation (Navistar), PACCAR, Inc. (PACCAR), Volvo Truck Corporation (Volvo) and Bombradier Recreational Products (BRP). We support our customers’ strategies to outsource non-core operations by supplying additional components and providing additional value added operations for drive train assemblies. We also manufacture high-pressure closures and other fabricated products for oil and gas pipelines.

Our manufacturing contracts for the truck components and assemblies markets are often sole-source by part number. Part numbers may be specified for inclusion in a single model or a range of models. Where we are the sole-source provider by part number, we are generally the exclusive provider to our customer of those specific parts for the duration of the manufacturing contract.

Sypris Technologies also manufactures energy-related products such as pressurized closures, insulated joints and other specialty products, primarily for oil and gas pipelines and related energy markets. This product line is an important source of diversified revenues and is becoming an area of greater focus for the Company going forward. We are committed to exploring new product developments and potential new markets, which will also be an increasing area of focus for the Company going forward.

Sypris Technologies represented approximately 55% of our net revenues in 2020.

Sypris Electronics. Sypris Electronics generates revenue primarily through circuit card and full box build manufacturing, high reliability manufacturing, systems assembly and integration, design for manufacturability and design to specification, for customers in the aerospace and defense electronics markets. This includes circuit card assemblies for electronic sensors and systems including radar and targeting systems, tactical ground stations, navigation systems, weapons systems, targeting and warning systems and those used in the nation’s high priority space programs.

We provide our customers with a broad variety of value added solutions, from low-volume prototype assembly to high-volume turnkey manufacturing. Our manufacturing contracts for the aerospace and defense electronics market are generally sole-source by part number. Our customers include large aerospace and defense companies such as Northrop Grumman Corporation (Northrop Grumman), L3Harris Technologies (L3Harris), Collins Aerospace Systems, BAE Systems (BAE) and Analog Devices, Inc. (ADI). We serve as a subcontractor on U.S. government programs and do not serve as a prime contractor to the U.S. government.

The engineering and manufacturing of highly complex components for the aerospace and defense industries is a fragmented industry with no dominant player in the market. The industry has continued to grow with more companies developing printed circuit board assembly capabilities and others entering the market via mergers and acquisitions of smaller companies. This competitive business environment, along with the impact of federal government spending uncertainties in the U.S. and the allocation of funds by the U.S. Department of Defense has challenged Sypris Electronics over the past several years.

During 2019 and 2020, we announced new program awards as a subcontractor for Sypris Electronics, with certain programs contributing to revenue in 2020 and continuing into 2021 through 2022. In addition to contract awards from U.S. Department of Defense (“DoD”) prime contractors related to weapons systems, electronic warfare and infrared countermeasures in our traditional aerospace and defense markets, we have also been awarded subcontracts related to the communication and navigation markets, which align with our advanced capabilities for delivering products for complex, high cost of failure platforms.

On December 27, 2020, the President of the United States signed the fiscal year (FY) 2021 Consolidated Appropriations Act, providing annual funding for the DoD, other government agencies, and COVID-19 relief. The appropriations provide $741 billion in discretionary funding for national defense (including DoD funding and defense-related spending in energy and water development, homeland security, and military construction appropriations), of which $671 billion is in base funding and $69 billion is Overseas Contingency Operations (“OCO”)/emergency funding (OCO and emergency supplemental funding do not count toward discretionary spending caps). Of the $741 billion, the DoD was allocated $704 billion, composed of $635 billion in base funding and $69 billion in OCO and emergency funding. The appropriations adhere to the Bipartisan Budget Act of 2019 (BBA 2019), which increased the spending limits for both defense and non-defense discretionary funds for the final two years (FY 2020 and FY 2021) of the Budget Control Act of 2011 (BCA).

It remains uncertain when the government will approve FY 2021 appropriations and what government programs will be funded and at what levels. We expect to compete for follow-on business opportunities as a subcontractor on future builds of several existing government programs. However, the long-term impacts of COVID-19 on government budgets and other funding priorities that impact demand for our products and services and our business are difficult to predict. 

In the past few years, we have faced challenges within Sypris Electronics, including certain electronic component shortages and extensive lead-time manufacturing issues. This had a negative impact on our production schedules and margin performance in 2019. However, these negative impacts did not persist in 2020, as most of the component shortages and issues were resolved in 2019 and in early 2020. The majority of the government aerospace and defense programs that we support require specific components that are sole-sourced to specific suppliers; therefore, the resolution of supplier constraints requires coordination with our customers or the end-users of the products. We have partnered with our customers to qualify alternative components or suppliers and will continue to focus on our supply chain to attempt to mitigate the impact of supply component shortages on our business. While the COVID-19 outbreak did not have a material impact on our supply chain in 2020, we expect that global shutdowns of raw materials production are expected to have a delayed impact on overall component shortages in 2021. We may not be successful in addressing these shortages and other issues.

Sypris Electronics accounted for approximately 45% of net revenue in 2020.

Our Markets

Sypris Technologies. The industrial manufacturing markets include automotive, truck and off-highway components and assemblies and specialty closures. The automotive and truck components and assemblies market consists of the original equipment manufacturers, or OEMs, including FCA, Freightliner, GM, Mack, Navistar, PACCAR and Volvo, and an extensive supply chain of companies of all types and sizes that are classified into different levels or tiers. Tier 1 companies represent the primary suppliers to the OEMs and include Meritor, Dana Inc. (Dana), Detroit Diesel Corporation (Detroit Diesel), American Axle & Manufacturing Holdings, Inc. (America Axle) and Transmisiones y Equipos Mecanicos, S.A. de C.V. (Tremec), among others. Below this group of companies reside numerous suppliers that either supply the OEMs directly or supply the Tier I companies. In all segments of the truck components and assemblies market, however, suppliers are under intense competitive pressure to improve product quality and to reduce capital expenditures, production costs and inventory levels. Beginning in 2015, the Company lost several of its traditional Tier 1 customers in the commercial vehicle markets, and we have determined to migrate away from doing business with certain of those customers, while seeking to replace these customers with more profitable customer relationships, especially among the heavy truck, off-highway and automotive OEMs, Tier 1 suppliers and others who place a higher value on the Company’s innovation, flexibility and core commitment to lean manufacturing principles. The customers for our specialty closure products consists primarily of operators and builders of oil and gas pipelines, which are also facing significant pressures to improve quality, reduce costs and defer capital expenditures.

Sypris Electronics. Although we believe that our programs are well aligned with national defense and other priorities, shifts in domestic and international spending and tax policy, changes in security, defense and intelligence priorities, the affordability of our products, changes in or preferences for new or different technologies, general economic conditions, tariffs and other factors may affect the level of funding for existing or proposed programs.

Market conditions for our electronic manufacturing business are characterized by a number of obstacles. The nature of providing manufactured products to the aerospace and defense electronics industry as well as other regulated markets differs substantially from the commercial electronics manufacturing industry. The cost of failure can be extremely high, the manufacturing requirements are typically complex and products are produced in relatively small quantities. Companies within this industry are required to maintain and adhere to a number of strict and comprehensive certifications, security clearances and traceability standards.

Our Business Strategy

Our objective is to improve our position in each of our core markets by increasing the number of multi-year relationships with customers and investing in highly innovative and efficient production capacity to remain competitive on a global scale. We intend to serve our customers and achieve this objective by continuing to:

Concentrate on our Core Markets. We are a significant supplier of forged, machined, welded and heat-treated components and subassemblies, serving the commercial vehicle, off highway vehicle, light truck and energy markets in North America. We have been an established supplier to major aerospace and defense companies and agencies of the U.S. Government for over 40 years. We will continue to focus on those markets where we have the expertise, capacity and qualifications to achieve a competitive advantage.

Dedicate our Resources to Support Strategic Partnerships. We will continue to prioritize our resources to support the needs of industry leaders that embrace multi-year contractual relationships as a strategic component of their supply chain management and have the potential for long-term growth. We prefer contracts that are sole-source by part number so we can work closely with the customer to the mutual benefit of both parties.

Pursue the Strategic Acquisition of Assets. Over the long-term, we may consider the strategic acquisition of assets to consolidate our position in our core markets, expand our presence outside the U.S., create or strengthen our relationships with leading companies and expand our range of products in return for multi-year supply agreements. We will consider assets that can be integrated with our core businesses and that can be used to support other customers, thereby improving asset utilization and achieving greater productivity, flexibility and economies of scale.

Grow Through the Addition of New Value-Added Manufacturing Capabilities. We hope to grow through the addition of new value-added manufacturing capabilities and the introduction of additional components in the supply chain that enable us to provide a more complete solution by improving quality and reducing product cost, inventory levels and cycle times for our customers. In many instances, we offer a variety of state-of-the-art machining capabilities to our customers in the industrial manufacturing markets that enable us to reduce labor and shipping costs and minimize cycle times for our customers over the long-term, which we believe will provide us with additional growth opportunities in the future.

We believe that the number and duration of our strategic customer relationships should grow to enable us to invest in our business with greater certainty and with less risk. The investments we make in support of these relationships are targeted to provide us with the productivity, flexibility, technological edge and economies of scale that we believe will help to differentiate us from the competition in the future when it comes to cost, quality, reliability and customer service.

Customer Concentration

Our five largest customers in 2020 were Northrop Grumman, Sistemas Automotrices de Mexico, S.A de C.V. (Sistemas), Detroit Diesel, ADI and SubCom, which in the aggregate accounted for 64% of net revenue. Our five largest customers in 2019 were Sistemas Automotrices de Mexico, S.A de C.V. (Sistemas), Detroit Diesel, Northrop Grumman, L3Harris and SubCom, which in the aggregate accounted for 61% of net revenue. In 2020, Northrop Grumman, Sistemas and Detroit Diesel and represented approximately 22%, 14% and 12% of our net revenue, respectively. No other customer accounted for more than 10% of our net revenue in 2020. In 2019, Sistemas, Detroit Diesel and Northrop Grumman represented approximately 22%, 14% and 11% of our net revenue, respectively. No other customer accounted for more than 10% of our net revenue in 2019.

Geographic Areas and Currency Fluctuations

Our operations are located in the U.S. and Mexico. Our Mexican subsidiaries and affiliates are a part of Sypris Technologies and manufacture and sell a number of products similar to those Sypris Technologies produces or previously produced in the U.S. In addition to normal business risks, operations outside the U.S. may be subject to a greater risk of changing political, economic and social environments, changing governmental laws and regulations, currency revaluations and market fluctuations. Fluctuations in foreign currency exchange rates have primarily impacted our earnings only to the extent of remeasurement gains or losses related to U.S. dollar denominated accounts of our foreign subsidiaries, because the vast majority of our transactions are denominated in U.S. dollars. For the years ended December 31, 2020 and 2019, “other income, net” included foreign currency translation gains of less than $0.1 million and $0.2 million, respectively.

Net revenues from Mexican operations were $29.8 million, or 36%, and $40.5 million, or 46%, of our consolidated net revenues in 2020 and 2019, respectively. In 2020, net income from our Mexican operations was $4.7 million, as compared to our consolidated net income of $1.7 million. In 2019, net income from our Mexican operations was $1.1 million, as compared to our consolidated net loss of $3.9 million. You can find more information about our regional operating results, including our export sales, in Note 21 to our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K.

Sales and Business Development

Our principal sources of new business originate from the expansion of existing relationships, referrals and direct sales through senior management, direct sales personnel, domestic and international sales representatives, distributors and market specialists. We supplement these selling efforts with a variety of sales literature, advertising in trade media and participating in trade shows. We also utilize engineering specialists to facilitate the sales process by working with potential customers to reduce the cost of the products they need. Our specialists achieve this objective by working with the customer to improve their product’s design for ease of manufacturing or by reducing the amount of set-up time or material that may be required to produce the product. The award of contracts or programs can be a lengthy process, which in some circumstances can extend well beyond 24 months. Upon occasion, we commit resources to potential contracts or programs that we ultimately do not win.

Our objective is to increase the value we provide to the customer on an annual basis beyond the contractual terms that may be contained in a supply agreement. To achieve this objective, we commit to the customer that we will continuously look for ways to reduce the cost, improve the quality, reduce the cycle time and improve the life span of the products we supply the customer. Our ability to deliver on this commitment over time is expected to have a significant impact on customer satisfaction, loyalty and follow‑on business.

We have signed long-term supply agreements with Detroit Diesel, Volvo, Tremec, Danfoss Industries S.A de C.V. (Danfoss) and Sistemas. We have also been awarded purchase orders for various products and components from American Axle, Meritor, and Dana. We have launched the Sypris Ultra® axle shaft with Detroit Diesel and have strong interest from others within the customer base who are interested in this patented product. We are continuing to explore other opportunities as they arise and have a significant number of outstanding quotations in progress, but there can be no assurances that our efforts to develop new sources of revenues will be successful.

Competition

The markets that we serve are highly competitive, and we compete against numerous domestic and international companies in addition to the internal capabilities of some of our customers. In the industrial manufacturing markets, we compete primarily against other component suppliers such as Ramkrishna Forgings Limited, Mid-West Forge, Inc., GNA Axles Limited, Brunner International, Inc., Bharat Forge, Commercial Forged Products, Spencer Forge and Machine, Inc., Traxle, SPX Flow, Inc., T.D. Williamson Inc. and National Oilwell Varco, Inc., certain of which serve as suppliers to many Tier I and smaller companies. In the aerospace and defense electronics market, we compete primarily against other component suppliers such as Celestica Inc., Jabil Circuit, Inc. and Spartan Corporation. We may face new competitors in the future as the outsourcing industry evolves and existing or start-up companies develop capabilities similar to ours. In addition, we will face new competitors as we attempt to increase and expand our business.

We believe that the principal competitive factors in our markets include the availability of capacity, currency exchange rates (especially in low-cost countries), technological capability, flexibility, financial strength and timeliness in responding to design and schedule changes, price, quality and delivery. Although we believe that we generally compete favorably with respect to many of these factors, some of our competitors, as compared to us, are larger and have greater financial and operating resources, greater geographic breadth and range of products, customer bases and brand recognition than we do. We also face competition from manufacturing operations of our current and potential customers that continually evaluate the relative benefits of internal manufacturing compared to outsourcing.

Suppliers

For portions of our business, we purchase raw materials and component parts from our customers or from suppliers chosen by our customers, at prices negotiated by our customers. When these suppliers increase their prices, cause delays in production schedules or fail to meet our customers’ quality standards, these customers have typically agreed to reimburse us for the costs associated with such price increases and not to charge us for costs caused by such delays or quality issues. Accordingly, our risks are largely limited to accurate inspections of such materials, timely communications and the collection of such reimbursements or charges, along with any additional costs incurred by us due to delays in, interruptions of, or non-optimal scheduling of production schedules. However, for a meaningful part of our business, we arrange our own suppliers and assume the additional risks of price increases, quality concerns and production delays.

Raw steel and fabricated steel parts are a major component of our cost of sales and net revenue for the industrial manufacturing business. We purchase a portion of our steel for use in this business at the direction of our customers, with periodic changes in the price of steel being reflected in the prices we are paid for our products. Increases in the costs of steel or other supplies can increase our working capital requirements, scrap expenses and borrowing costs.

There can be no assurance that supply interruptions, tariffs or price increases will not slow production, delay shipments to our customers or increase costs in the future, any of which could adversely affect our financial results. Delays, interruptions or non-optimal scheduling of production related to interruptions in raw materials supplies can be expected to increase our costs.

Patents, Trademarks and Licenses

We own or license a number of patents and trademarks, but our business as a whole is not materially dependent upon any one patent, trademark, license or technologically related group of patents or licenses.

We regard our manufacturing processes and certain designs as proprietary trade secrets and confidential information. We rely largely upon a combination of trade secret laws, non-disclosure agreements with customers, suppliers and consultants, and our internal security systems, confidentiality procedures and employee confidentiality agreements to maintain the trade secrecy of our designs and manufacturing processes.

Government Regulation

Our operations are subject to compliance with regulatory requirements of federal, state and local authorities, in the U.S. and Mexico, including regulations concerning financial reporting and controls, labor relations, minimum pension funding levels, export and import matters, health and safety matters and protection of the environment. While compliance with applicable regulations has not adversely affected our operations in the past, there can be no assurance that we will continue to be in compliance in the future or that these regulations will not change or that the costs of compliance will not be material to us.

We must comply with detailed government procurement and contracting regulations and with U.S. Government security regulations, certain of which carry substantial penalty provisions for nonperformance or misrepresentation in the course of negotiations. Our failure to comply with our government procurement, contracting or security obligations could result in penalties or our suspension or debarment from government contracting, which would have a material adverse effect on our consolidated results of operations.

We are required to maintain U.S. Government security clearances in connection with certain activities of Sypris Electronics. These clearances could be suspended or revoked if we were found not to be in compliance with applicable security regulations. Any such revocation or suspension would delay our delivery of products to customers. Although we have adopted policies designed to ensure compliance with applicable regulations, there can be no assurance that the approved status of our facilities or personnel will continue without interruption.

We are also subject to comprehensive and changing federal, state and local environmental requirements, both in the U.S. and in Mexico, including those governing discharges to air and water, the handling and disposal of solid and hazardous wastes and the remediation of contamination associated with releases of hazardous substances. We use hazardous substances in our operations and, as is the case with manufacturers in general, if a release of hazardous substances occurs on or from any properties that we may own or operate, we may be held liable and may be required to pay the cost of remedying the condition. The amount of any resulting liability could be material.

Human Capital

As of December 31, 2020, we had a total of 664 employees, of which 491 were engaged in manufacturing, 13 were engaged in sales and marketing, 58 were engaged in engineering and 102 were engaged in administration. Approximately 386 of our employees were covered by collective bargaining agreements with various unions that expire on various dates through 2022. Excluding certain Mexico employees covered under an annually ratified agreement, there are no collective bargaining agreements expiring within the next 12 months. Our ability to maintain our workforce depends on our ability to attract and retain new and existing customers. Although we believe overall that relations with our labor unions are positive, there can be no assurance that present and future issues with our unions will be resolved favorably, that negotiations will be successful or that we will not experience a work stoppage, which could adversely affect our consolidated results of operations.

Throughout our Company’s history, we always recognized that people drive the strength of our business and our ability to effectively serve our clients and sustain our competitive position. We are focused on harmonizing our approach to talent to provide seamless opportunities and better experiences to our employees.

We have a Code of Conduct (“Code of Conduct”) applicable to all of our employees, which creates expectations and provides guidance for employees to make the right decisions. Our Code of Conduct includes topics such as anti-corruption, discrimination, harassment, privacy, appropriate use of Company assets, protecting confidential information, and reporting Code of Conduct violations. It is used to reinforce our passion for operating in a fair, honest, responsible and ethical manner. The Code of Conduct also emphasizes the importance of having an open, welcoming environment in which all employees feel empowered to do what is right and are encouraged to voice concerns should violations of the Code of Conduct be observed. All employees are required to complete training on the Code of Conduct annually.

In an effort to ensure business continuity of our operations during events where senior leadership personnel is impacted, we endeavor each year to examine the top roles within our corporate and subsidiary organizations and identify individuals who could step into those positions if called upon to do so and to identify a set of individuals who could do so with additional time, experience and development.  This succession planning exercise is conducted annually and reviewed with the Board of Directors.

In response to the COVID-19 pandemic, we implemented significant changes that we determined were in the best interest of our employees and which are intended to comply with government orders in all the states and countries where we operate. In an effort to keep our employees safe and to maintain operations during the COVID-19 pandemic, we have implemented a number of new health-related measures including, the requirement to wear Company-provided face-masks at all times while on Company property, temperature taking protocols, increased hygiene, cleaning and sanitizing procedures at all locations, social-distancing, restrictions on visitors to our facilities and limits on in-person meetings and other gatherings. The health and wellness of our employees are critical to our success.

For information on the risks related to our human capital resources, see Item 1A – Risk Factors.

Internet Access

Copies of our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge through our website (www.sypris.com) as soon as reasonably practicable after we electronically file the material with, or furnish it to, the Securities and Exchange Commission (“SEC”). The SEC maintains an internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including us, at www.sec.gov. The references to these website addresses do not constitute incorporation by reference of the information contained on the websites, which should not be considered part of this document.

A number of significant risk factors could materially affect our business operations and cause our performance to differ materially from any future results projected or implied by our prior statements, including those described below. Many of these risk factors are also identified in connection with the more specific descriptions of our business and results of operations contained throughout this report. The impact of the COVID-19 pandemic and resulting economic conditions may increase many of these risks.

Customers and Revenue Growth Risks

We seek to generate new business revenues to support our ongoing operations.

Our businesses generally require a higher level of new business revenues than we currently have in order to operate profitably. We are working to increase our revenues with new and existing customers. However, if we are not successful in significantly increasing over overall net revenues, we may be unable to maintain the critical mass of capital investments or talented employees that are needed to succeed in our chosen markets or to maintain our existing facilities, which could result in additional restructuring or exit costs. As we expand our customers and our products, we must also effectively manage a more diverse production schedule to avoid slowing our production output. As we are awarded new products with new customers, we must onboard new operational processes in an effective and efficient manner. We cannot assure you that we will be successful in increasing our revenues with new and existing customers to a level necessary to maintain or return to profitability.

Even when we are chosen by a new or existing customer for new business, there can be no assurance that we will be able to successfully complete final contract negotiations on acceptable terms or at all. In many cases, we announce significant contract “orders”, “wins” or “awards” before final contract negotiations are complete, and there is a chance that these new announced contract orders, wins or awards may not result in a definitive agreement or the expected amount of revenues or profits. We cannot guarantee that any particular contract with a customer will result in the anticipated level revenue or profitability.

We depend on a few key customers in challenging industries for most of our revenues.

Our five largest customers in 2020 were Northrop Grumman, Sistemas, Detroit Diesel, ADI and SubCom, which in the aggregate accounted for 64% of net revenue. The loss of any of these customers or any other significant customer, or the renewal of business on less favorable terms, would have a material adverse impact on our business and results of operations. Due to our customer concentration, if one or more of our major customers were to experience difficulties in fulfilling their obligations to us, cease doing business with us, significantly reduce the amount of their purchases from us, favor competitors or new entrants or change their purchasing patterns, our business may be harmed.

The truck components and assemblies industry has experienced consolidation, credit risk, highly cyclical market demand, labor unrest, rising steel costs, extensive raw material lead-times, bankruptcy and other obstacles. The demand for our energy-related products lines, historically, has risen and fallen with the prices of oil and/or natural gas, as our customers’ capital expenditures budgets tend to be dependent upon energy prices. We depend on the continued growth and financial stability of customers in these industries and our core markets, as well as general economic conditions. Adverse changes affecting these customers, markets or economic conditions could harm our operating results.

The aerospace and defense electronics industry has experienced consolidation, increased competition, disruptive new technologies and uncertain funding levels. The aerospace and defense industry is also pressured by cyclicality, rapid technological change, shortening product life cycles, decreasing margins, component obsolescence and shortages and government procurement and certification processes. Our aerospace and defense business faces reduced revenues in the final phases of several key legacy programs which must be replenished with new technologies if we are to successfully maintain or expand our market share. Our failure to address any of these factors could impair our ability to grow and diversify our base of customers in this segment.

There can be no assurance that any of our customers will not default on, delay or dispute payment of, or seek to reject our outstanding invoices in bankruptcy or otherwise. In addition, the existence of these factors may result in fewer customers in our target markets due to consolidation, bankruptcy, competitive or other market reasons, making it more difficult to obtain new clients and diversify our customer base in the near future.

Customer contracts could be less profitable than expected.

We generally bear the risk that our contracts could be unprofitable or less profitable than planned, despite our estimates of revenues and future costs to complete such contracts.

A material portion of our business, historically, has been conducted under multi-year contracts, which generally include fixed prices or periodic price reductions without minimum purchase requirements. Over time, our revenues may not cover any increases in our operating costs which could adversely impact our results. Our financial results are at greater risk when we accept contractual responsibility for raw material or component prices, when we cannot offset price reductions, freight penalties, importation fees and cost increases with operating efficiencies or other savings, when we must submit contract bid prices before all key design elements are finalized or when we are subjected to other competitive pressures which erode our margins. The profitability of our contracts also can be adversely affected by unexpected start-up costs on new programs, inability to negotiate milestone billings, operating inefficiencies, scheduling constraints, ineffective capital investments, inflationary pressures or inaccurate forecasts of future unit costs.

Unexpected changes in our customers’ demand levels and our ability to execute our production efficiently have harmed our operating results in the past and could do so in the future. Many of our customers will not commit to firm production or delivery schedules. Inaccurate forecasting of our customers’ requirements can disrupt the efficient utilization of our manufacturing capacity, inventories or workforce and can cause increases in our inventory and working capital levels. If we receive unanticipated orders or rapid increases in demand, these incremental volumes could be unprofitable due to the higher costs of operating above our optimal capacity. Disagreements over pricing, quality, delivery, capacity, exclusivity or trade credit terms could disrupt order schedules. Orders may also fluctuate due to changing global capacity and demand, new products, changes in market share, reorganizations or bankruptcies, material shortages, labor disputes, freight costs, tariffs or other factors that discourage outsourcing. These forces could increase, decrease, accelerate, delay or cancel our delivery schedules.

Our ability to stabilize employee retention and execute on existing customer orders could put current revenues at risk as we proceed with the execution of our plans. If we lose anticipated revenues, we might not succeed in redeploying our substantial capital investments and other fixed costs, potentially forcing additional plant closures, impairments of long-lived and other assets or increased losses.

Congressional budgetary constraints or reallocations could reduce our government related sales.

Sypris Electronics serves as a contractor for large aerospace and defense companies such as Northrop Grumman and L3Harris, typically under federally funded programs, which represented approximately 37% and 23% of net revenue in 2020 and 2019, respectively.

Sypris Electronics was adversely affected by declines in the overall government defense market due to the effects of sequestration in the past, and may be further affected if funding for programs in which we participate, either by selling products directly to U.S. government agencies or as a subcontractor to prime contractors such as Northrop Grumman, L3Harris, SubCom, LLC (SubCom) and ADI, is reduced, delayed or cancelled. Our ability to obtain new contract awards also could be negatively affected by funding and budgeting for such programs.

Competition Risks

Increasing competition could limit or reduce our market share.

As an outsourced manufacturer, we operate in highly competitive environments that often include our customers’ internal capabilities. We believe that the principal competitive factors in our markets include the availability of manufacturing capacity, increasingly unfavorable currency exchange rates (especially in low-cost countries), technological strength, speed and flexibility in responding to design or schedule changes, price, quality, delivery, cost management and financial strength. Our earnings could decline if our competitors or customers can provide comparable speed and quality at a lower cost, or if we fail to adequately invest in the range and quality of products and manufacturing capabilities our customers require.

Most of our competitors are larger and have greater financial and organizational resources, geographic breadth and range of products, customer bases and brand recognition than we do. As a result, our competitors may respond more quickly to technological changes or customer needs, consume lower fixed and variable unit costs, negotiate reduced component prices, and obtain better terms for financing growth. If we fail to compete in any of these areas, we may lose market share and our business could be seriously harmed. There can be no assurance that we will not experience increased competition or that we will be able to achieve profitability as these new challenges arise.

Our technologies could become obsolete, reducing our revenues and profitability.

The markets for our products are characterized by changing technology and continuing process development. The future of our business will depend in large part upon the continuing relevance of our technological capabilities. We could fail to make required capital investments, develop or successfully market products that meet changing customer needs and anticipate or respond to technological changes in a cost-effective and timely manner. Our inability to successfully launch or sustain new or next generation programs or product features, especially in accordance with budgets or committed delivery schedules, could materially adversely affect our financial results. We could encounter competition from new or developing technologies that render our technologies and equipment less profitable or obsolete in our chosen markets and our operating results may suffer. In particular, the Company is currently developing new products and pursuing new programs in an attempt to increase Sypris Electronics’ revenue stream. However, commercializing the new products and programs is costly and has been slower than anticipated. The launch of any new products or programs within Sypris Electronics may not be successful.

Execution Risks

Contract terminations or delays could harm our business.

We often provide products under contracts that contain detailed specifications, quality standards and other terms. If we are unable to perform in accordance with such terms, our customers might seek to terminate such contracts, demand price concessions or other financial consideration or downgrade our performance ratings or eligibility for new business. Moreover, many of our contracts are subject to termination for convenience or upon default. These provisions could provide only limited recoveries of certain incurred costs or profits on completed work and could impose liability for our customers’ costs in procuring undelivered items from another source. If any of our significant contracts were to be repudiated, terminated or not renewed, we could lose substantial revenues, and our operating results as well as prospects for future business opportunities could be adversely affected.

We are subject to various audits, reviews and investigations, including private party “whistleblower” lawsuits, relating to our compliance with federal and state laws. Should our business be charged with wrongdoing, or determined not to be a “presently responsible contractor,” we could be temporarily suspended or debarred from receiving new government contracts or government-approved subcontracts.

We must operate more efficiently.

If we are unable to improve the cost, efficiency and yield of our operations, and if we are not able to control costs, our financial results could suffer and we could be forced to sell additional assets, take on additional debt at higher costs or take other measures to restructure our operations or capital structure. A number of major obstacles could include:

Our management or systems could be inadequate to support our existing or future operations, especially as we downsize our operating staff to reduce expenses while we work to increase revenues. New customers or new contracts, particularly with new product offerings, could require us to invest in additional equipment or other capital expenditures which exceed our budgeted plans. We may have limited experience or expertise in installing or operating such equipment, which could negatively impact our ability to deliver products on time or with acceptable costs. In addition, a material portion of our manufacturing equipment requires significant maintenance to operate effectively, and we may experience maintenance and repair issues. The risk of technical failures, nonconformance with customer specifications, an inability to deliver next generation products or other quality concerns could materially impair our operating results. Similarly, expanding production for our energy-related products without effective process or quality controls could materially increase scrap rates and may impact the safety of our operating environment or expose our business to warranty risks and contractual violations.

Cyber security risks could negatively affect operations and result in increased costs.

Sypris Electronics, as a U.S. defense contractor, and our Company overall, face cyber security threats, threats to the physical security of our facilities and employees and terrorist or criminal acts, as well as the potential for business disruptions associated with information technology failures and natural disasters.

We routinely experience cyber security threats, threats to our information technology infrastructure and attempts to gain access to our sensitive information, as do our customers, suppliers and subcontractors. Prior cyber attacks directed at us have not had a material impact on our financial results. The techniques used to obtain unauthorized access, disable or degrade service or sabotage systems are constantly evolving and often are not recognized until launched against a target, or even some time after. We may be unable to anticipate these techniques, implement adequate preventative measures or remediate any intrusion on a timely or effective basis even if our security measures are appropriate, reasonable, and/or comply with applicable legal requirements. Certain efforts may be state-sponsored and supported by significant financial and technological resources, making them even more sophisticated and difficult to detect. Insider or employee cyber and security threats are also a significant concern for all companies, including ours.

Although we work cooperatively with our customers and our suppliers, subcontractors, and other partners to seek to minimize the impacts of cyber threats, other security threats or business disruptions, we must rely on the safeguards put in place by those entities, and those safeguards might not be effective.

The costs related to cyber security or other security threats or disruptions may not be fully insured or indemnified by other means. Occurrence of any of these events could adversely affect our internal operations, the products we provide to customers, loss of competitive advantages derived from our research and development efforts, early obsolescence of our products, our future financial results, our reputation or our stock price.

Supplier Risks

Interruptions in the supply of key components and quality systems could disrupt production.

Some of our products require one or more components that are available from a limited number of providers or from sole-source providers. In the past, some of the materials we use, including steel, certain forgings or castings, capacitors and memory and logic devices, have been subject to industry-wide shortages or capacity allocations. As a result, suppliers have been forced to allocate available quantities among their customers, and we have not been able to obtain all of the materials desired. Some of our suppliers have struggled to implement reliable quality control systems which can negatively impact our operating efficiency and financial results. In downward business cycles, the tightening of credit markets has threatened the financial viability of an increasing number of suppliers of key components and raw materials and forced unanticipated shutdowns. Our inability to reliably obtain these or any other materials when and as needed has in the past and could in the future slow production or assembly, delay shipments to our customers, cause noncompliance with product certifications, impair the recovery of our fixed costs and increase the costs of recovering to customers’ schedules, including overtime, expedited freight, equipment maintenance, operating inefficiencies, higher working capital and the obsolescence risks associated with larger buffer inventories. Each of these factors could adversely affect operating results.

Shortages or increased costs of utilities could harm our business and our customers.

We and our customers depend on a constant supply of electricity and natural gas from utility providers for the operation of our respective businesses and facilities. In the past, we have experienced power outages which reduced our ability to deliver products and meet our customers’ demand for those products. If we or our customers experience future interruptions in service from these providers, our production and/or delivery of products could be negatively affected. We have experienced increased costs due to the heavy consumption of energy in our production process, which have been offset through revised production schedules. However, if the cost of energy continues to increase, our results of operations and those of certain customers could be negatively impacted.

Fluctuations in the price of raw materials, including tariffs or other trade restrictions on imported steel or other goods, could negatively impact us.

For significant portions of our business, we purchase raw materials and component parts which have been designated or specified by our customers, at prices negotiated by our customers.  Raw material price fluctuations and volatility in the commodity markets, including tariffs and trade restriction could impact prices in the future. While our customers have generally agreed to reimburse us for the cost of such materials, this could change in the future, and our risks will continue to include the timely communication and successful collection of any such reimbursements.  In any event, for a growing part of our business, we arrange our own suppliers and we could be impacted by the risks of any landed price increases, trade restrictions or production delays.  Increases in the costs of steel or other supplies could also increase our working capital requirements, scrap expenses and borrowing costs.

In general, there can be no assurance that any price fluctuations relating to tariffs or trade restrictions will not reduce demand, slow production, delay shipments to our customers or increase our costs in the future, any of which could adversely affect our financial results.

Access to Capital and Acquisitions Risks

Until we have returned to sustained levels of profitability, our access to capital may be limited.

Until the Company becomes profitable again, there can be no assurances that the Company will succeed in attracting new, acceptable sources of debt or equity capital. If we are unable to become profitable on a timely basis, we may need to use existing cash resources or other assets to fund operating losses. While we have borrowed from Gill Family Capital Management, Inc. (“GFCM”), an entity controlled by the Gill family which beneficially owns approximately 15.3% of our common stock, on acceptable terms in the past, there can be no assurances that such debt financing would be available in the future.

We have incurred indebtedness under the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) which may be subject to audit, may not be forgivable and may eventually have to be repaid. Any repayment of such indebtedness may limit the funds available to us and may restrict our flexibility in operating our business.

The Company entered into a promissory note with BMO Harris Bank National Association (“BMO”), effective May 1, 2020, that provides for a loan in the amount of $3.6 million (the “PPP Loan”) pursuant to expansion of the Small Business Administration (“SBA”) 7(a) loan program (the “Paycheck Protection Program” or “PPP”), established under the CARES Act. The PPP Loan is subject to forgiveness under the PPP upon submission and review of a loan forgiveness application, to the extent that PPP Loan proceeds have been used to pay expenses permitted by the PPP, including payroll costs, covered rent and mortgage obligations, and covered utility payments. Amounts outstanding under the loan bear a fixed interest rate of 1.0% per annum with a maturity date of May 1, 2022, two years from the commencement date.

The U.S. Department of the Treasury and SBA have announced that SBA will conduct audits for PPP loans that exceed $2 million. Should we be audited or reviewed by the U.S. Department of the Treasury or the SBA as a result of the PPP Loan or filing an application for forgiveness or otherwise, such audit or review could result in the diversion of management’s time and attention, generate negative publicity and cause us to incur legal and reputational costs. If we were to be audited and receive an adverse outcome in such an audit, we could be required to return the full amount of the PPP Loan and may potentially be subject to civil and criminal fines and penalties. We may not have the resources to repay the PPP Loan if required to do so by the federal government.

On November 24, 2020, the Company submitted an application for forgiveness of the entire amount due on the PPP Loan. There can be no assurance that the principal and interest amounts under the PPP Loan will be forgiven. If all or substantially all of the PPP Loan is not forgiven or it is subsequently determined that it must be repaid, we may be required to use a substantial portion of our cash flows from operations or proceeds from the sale of our assets to pay interest and principal on the PPP Loan. Any such repayment of the PPP Loan will reduce the funds available to us for working capital and other corporate purposes and may limit our ability to obtain additional financing for working capital or divert funds that are otherwise necessary to run our business. We cannot assure that our business will generate sufficient cash flow from operations or that future financing will be available to us in amounts sufficient to enable us to make required and timely repayments on our indebtedness, or to fund our operations. Additionally, though we believe we are eligible recipients of the PPP Loan under the PPP and our use of PPP Loan proceeds has been in compliance with PPP rules and guidance, our receipt of the PPP Loan and the use of PPP Loan proceeds could result in negative publicity, or expose us to claims or potential liability under the federal False Claims Act, which prohibits the known filing of a false claim or the known use of false statements to obtain payment from the federal government, if it is determined that we were in fact not eligible to take the PPP Loan in the first instance.

Our ability to finance expansion or new business opportunities may be limited.

Our future liquidity and capital requirements depend on numerous factors other than bank borrowings or debt financing, including the pace at which we can effectively cut costs, increase revenues or successfully launch new products. One method we have historically used to increase our revenues and obtain multi-year supply agreements is to buy a customer’s non-core manufacturing assets, or to acquire alternative, but equivalent, production capabilities and to produce products for such customers under a multi-year contract. We have also pursued strategies that rely on research and development efforts to develop and commercialize our new products. We may not have the financial resources or be able to raise funds necessary to pursue these strategies under any future debt agreements which could further limit our ability to replace the loss of revenues.

Our growth strategies could be ineffective due to the risks associated with further acquisitions.

Our growth strategy has included acquiring complementary businesses. We could fail to identify, obtain financing or complete suitable acquisitions on acceptable terms and prices. Acquisition efforts entail a number of risks, including: diversion of management’s attention; difficulties in integrating systems, operations and cultures; potential loss of key employees and customers of the acquired companies; lack of experience operating in the geographic market of the acquired business; an increase in our expenses and working capital requirements; risks of entering into markets or producing products where we have limited or no experience; difficulties in integrating purchased technologies and products with our technologies and products; our ability to improve productivity and implement cost reductions; our ability to secure collective bargaining agreements with employees; and exposure to unanticipated liabilities.

Our discovery of, or failure to discover, material issues during due diligence investigations of acquisition targets, either before closing with regard to potential risks of the acquired operations, or after closing with regard to the timely discovery of breaches of representations or warranties, or of certain indemnified environmental conditions, could seriously harm our business.

We could fail to fully implement our growth plans.

As the Company seeks to expand its revenues and strategically diversify its customer base, we could fail to adequately overcome significant obstacles such as slowing markets, the loss of key employees, unexpected increases in costs, or new competitors or technologies in our key markets, among other risks. The failure to fully implement our growth plans could materially adversely affect our revenues, operating results and financial condition.

Labor Relations Risks

We must attract and retain qualified employees while successfully managing related costs.

Our future success in a changing business environment, including during rapid changes in the size, complexity or skills required of our workforce, as we experienced in 2018 and 2017 and again in 2021, will depend to a large extent upon the efforts and abilities of our executive, managerial and technical employees. The loss of key employees, especially in a strong economic environment, and our ability to effectively train existing employees, could have a material adverse effect on our operations. Our future success will also require an ability to attract and retain qualified employees, especially those with engineering or production expertise in our core business lines.

Changes in our labor costs such as salaries, wages and benefits, or the cost of providing pension and other employee benefits, changes in health care costs, investment returns on plan assets and discount rates used to calculate pension and related liabilities or other requirements to accelerate the level of our pension fund contributions to reduce or eliminate underfunded liabilities, could lead to increased costs or disruptions of operations in any of our business units.

Disputes with labor unions could disrupt our business plans.

As of December 31, 2020, we had collective bargaining agreements covering approximately 386 employees (all of which were in Sypris Technologies), or 58% of our total employees. Excluding certain Mexico employees covered under an annually ratified agreement, there are no collective bargaining agreements expiring within the next 12 months. Certain Mexico employees are covered by an annually ratified collective bargaining agreement. These employees in Mexico represented approximately 53% of the Company’s workforce, or 350 employees at December 31, 2020. Our ability to maintain our workforce depends on our ability to attract and retain new and existing customers as well as maintain good relations with our employees and labor unions. We could experience a work stoppage or other disputes which could disrupt our operations or the operations of our customers and could harm our operating results.

Regulatory Risks

Environmental, natural disasters, health and safety risks could expose us to potential liability.

We are subject to a variety of environmental regulations relating to the use, storage, discharge and disposal of hazardous chemicals and substances used in our operations. If we fail to comply with present or future regulations, we could be forced to alter, suspend or discontinue our manufacturing processes and pay substantial fines or penalties.

Groundwater and other contamination has occurred at certain of our current and former facilities during the operation of those facilities by their former owners, and this contamination may occur at future facilities we operate or acquire. There is no assurance that environmental indemnification agreements we have secured from the former owners of certain of these properties will be adequate to protect us from liability. Additionally, certain property we sold which was designated as Brownfields has been approved for development by the current owners and could expose us to future costs.

Our business is also subject to potential liabilities with respect to health and safety matters. We are required to comply with federal, state, local and foreign laws and regulations governing the health and safety of our workforce, and we could be held liable for damages arising out of human exposure to hazardous substances or other dangerous working conditions. Health and safety laws and regulations are complex and change frequently. As a result, our future costs to comply with such laws or the liabilities incurred in the event of any violations may increase significantly.

A natural disaster could disrupt our operations, or our customers’ or suppliers’ operations and could adversely affect our results of operations and financial condition. Although we have plans designed to mitigate the impact of natural disasters on our operations, those plans may be insufficient, and any catastrophe may disrupt our ability to manufacture and deliver products to our customers, resulting in an adverse impact on our business and results of operations. In addition, our global operations expose us to risks associated with public health crises, such as pandemics and epidemics, which could harm our business and cause our operating results to suffer. For example, the COVID-19 pandemic has resulted in travel disruption, trade disruption and has effected many companies’ operations globally. Infections may continue to be widespread, including in the countries where we have operations, and travel restrictions may remain or worsen, all of which could lead to reduced demand for our products and services, disruptions in our supply chain, any of which could have a negative impact on our business and operating results. Under our self-insured employee health program, the costs associated with a large number of employees infected could significantly impact our results.

Changes in interest rates and asset returns could increase our pension funding obligations and reduce our profitability.

We have unfunded obligations under certain of our defined benefit pension plans. The valuation of our future payment obligations under the plans and the related plan assets are subject to significant adverse changes if the credit and capital markets cause interest rates and projected rates of return to decline.  Such declines could also require us to make significant additional contributions to our pension plans in the future. A material increase in the unfunded obligations of these plans could also result in a significant increase in our pension expense in the future.

We may incur additional tax expense or become subject to additional tax exposure.

Our provision for income taxes and the cash outlays required to satisfy our income tax obligations in the future could be adversely affected by numerous factors. These factors include changes in the level of earnings in the tax jurisdictions in which we operate, changes in the valuation of deferred tax assets and liabilities, changes in our plans to repatriate the earnings of our non-U.S. operations to the U.S. and changes in tax laws and regulations.

In December 2017, the U.S. introduced broad ranging tax reform with the passage of the Tax Cuts and Jobs Act (“Act”) legislation. Among the tax reforms was a reduction of the corporate tax rate from 35% to 21%. Although the tax reform in the U.S. reduced the statutory tax rate to 21% for 2018, the effects of the lower rate were offset in part by the effects of increased nondeductible expenses and the global intangible low taxed income (“GILTI”) provisions which result in a certain amount of foreign earnings being subjected to U.S. tax. Considering the exclusion of foreign subsidiary dividends from taxation in the U.S., we believe the Act will provide some greater flexibility to repatriate future earnings of our foreign operations.

Our income tax returns are subject to examination by federal, state and local tax authorities in the U.S. and tax authorities outside the U.S. The results of these examinations and the ongoing assessments of our tax exposures could also have an adverse effect on our provision for income taxes and the cash outlays required to satisfy our income tax obligations.

Adverse regulatory developments or litigation could harm our business.

Our businesses operate in heavily regulated environments. We must successfully manage the risk of changes in or adverse actions under applicable law or in our regulatory authorizations, licenses and permits, governmental security clearances or other legal rights to operate our businesses, to manage our work force or to import and export goods and services as needed. Our business activities expose us to the risks of litigation with respect to our customers, suppliers, creditors, stockholders or from warranty claims or product liability, environmental or asbestos-related matters. We also face the risk of other adverse regulatory actions, compliance costs or governmental sanctions, as well as the costs and risks related to our ongoing efforts to design and implement effective internal controls.

General Risks

The COVID-19 pandemic has and could continue to materially adversely affect our financial condition and results of operations.

COVID-19, which has spread to every state in the United State and every county and has been declared a pandemic by the World Health Organization underscores certain risks we face, including those described above. COVID-19 has resulted in authorities imposing, and businesses and individuals implementing, numerous unprecedented measures to try to contain the virus, such as travel bans and restrictions, quarantines, shelter-in-place/stay-at-home and social distancing orders, and shutdowns. These measures have impacted and may further impact our workforce and operations, the operations of our customers, and those of our respective vendors, suppliers, and partners. We have manufacturing operations in the U.S. and Mexico, and each of these countries has been materially affected by the outbreak and taken measures to try to contain it. While we believe that, based on the various standards published to date, the work our employees are performing for the aerospace and defense, energy and transportation markets is essential, there can be no assurance that governmental authorities will not impose restrictions on the operations of our facilities as a result of the COVID-19 pandemic or that our facilities will continue to operate during the pandemic. If our operations or the operations of our suppliers are restricted, we may be unable to perform fully on our contracts and our costs may increase as a result of the COVID-19 pandemic. These cost increases may result in unfavorable changes in estimates which may not be fully recoverable or adequately covered by insurance. The ultimate impact and efficacy of government measures and potential future measures is currently unknown.

There is considerable uncertainty regarding the business impacts from such measures and potential future measures. Shelter-in-place orders and other measures, including work-from-home and social distancing policies implemented to protect employees, have resulted in reduced workforce availability at some of our sites, and reduced capacity at some of our vendors and suppliers. Restrictions on our access to or operation of our manufacturing facilities or on our support operations or workforce, or similar limitations for our vendors and suppliers, can impact our ability to meet customer demand and could have a material adverse effect on our financial condition and results of operations, particularly if prolonged. Similarly, current, and future restrictions or disruptions of transportation, such as reduced availability of air transport, port closures or delays, and increased border controls, delays or closures, can also impact our ability to meet demand and could materially adversely affect us. Our customers have experienced, and may continue to experience, disruptions in their operations and supply chains, which can result in delayed, reduced, or canceled orders, or collection risks, and which may adversely affect our results of operations.

The pandemic has significantly increased economic and demand uncertainty. The current outbreak and continued spread of COVID-19 has caused an economic slowdown, and it is possible that it could cause a global recession. There is a significant degree of uncertainty and lack of visibility as to the extent and duration of any such slowdown or recession. We have seen and may continue to see negative impacts on demand in some of our markets, particularly automotive and oil and gas. Given the significant economic uncertainty and volatility created by the pandemic, it is difficult to predict the nature and extent of impacts on our business but it has and may continue to have a materially adverse effect on our financial condition and result of operations.

The spread of COVID-19 has caused us to modify our business practices (including employee travel, employee work locations, cancellation of physical participation in meetings, events and conferences, and social distancing measures), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers, partners, vendors, and suppliers. Work-from-home and other measures introduce additional operational risks, including cybersecurity risks, which could have an adverse effect on our operations. There is no certainty that such measures will be sufficient to mitigate the risks posed by the virus, and illness and workforce disruptions could lead to unavailability of key personnel and harm our ability to perform critical functions.

Recently, the market price for our common stock has been volatile.

The market price of our common stock is subject to wide price fluctuations in response to various factors, many of which are beyond our control and may be unrelated to our financial condition, operating performance, prospects or other indicators of value. The factors include:

Our insurance coverage may be inadequate to cover all significant risk exposures.

We carry a range of insurance policies intended to protect our assets and operations, including general liability insurance and property damage insurance. While we endeavor to purchase insurance coverage appropriate to our risk assessment, we are unable to predict with certainty the frequency, nature or magnitude of claims for direct or consequential damages, and as a result our insurance program may not fully cover us for losses we may incur. In addition, as a result of a number of catastrophic weather and other events in the United States, insurance companies have incurred substantial losses and accordingly in many cases they have substantially reduced the nature and amount of insurance coverage available to the market, have broadened exclusions, and/or have substantially increased the cost of such coverage. It is likely that the tight insurance market will continue into the foreseeable future. Our business requires that we maintain various types of insurance. If such insurance is not available or not available on economically acceptable terms, our business could be materially and adversely affected.

We face other factors which could seriously disrupt our operations.

Many other risk factors beyond our control could seriously disrupt our operations, including: risks relating to war, future terrorist activities, or political uncertainties; risks relating to another pandemic, natural disasters or other casualties which could shut down our domestic or foreign facilities, disrupt transportation of products or supplies, increase the costs under our self-insurance program or change the timing and availability of funding in our aerospace and defense electronics markets; risks inherent in operating abroad, including foreign currency exchange rates, adverse regulatory developments, and miscommunications or errors due to inaccurate foreign language translations or currency exchange rates; or our failure to anticipate or to adequately insure against other risks and uncertainties present in our businesses including unknown or unidentified risks.

None.

Our principal manufacturing operations are engaged in electronics manufacturing for our aerospace and defense customers and industrial manufacturing for our truck components and assemblies and oil and gas pipeline component customers. The following chart indicates the significant facilities that we own or lease, the location and size of each such facility and the manufacturing certifications that each facility possesses. The facilities listed below (other than the corporate office) are used principally as manufacturing facilities.

Below is a listing and description of the various manufacturing certifications or specifications that we utilize at various of our facilities.

Groundwater and other contamination has occurred at certain of our current and former facilities during the operation of those facilities by their former owners, and this contamination may occur at future facilities we operate or acquire. There is no assurance that environmental indemnification agreements we have secured from the former owners of certain of these properties will be adequate to protect us from liability. No administrative or judicial proceedings with respect to these or any other environmental regulations or conditions are pending against the Company or known by the Company to be contemplated by Government authorities.

The Company is subject to other legal proceedings and claims that have not been fully resolved and that have arisen in the ordinary course of business. In the opinion of management, there was not at least a reasonable possibility the Company may have incurred a material loss, or a material loss in excess of a recorded accrual, with respect to loss contingencies for these other asserted legal and other claims. However, the outcome of legal proceedings and claims brought against the Company is subject to significant uncertainty. In addition, there may be other potential claims, liabilities, materials or design defects, or other customer complaints that have not been asserted, but which could adversely impact us in the future. Therefore, although management considers the likelihood of such an outcome to be remote, if one or more of these other legal matters or potential matters were resolved against the Company in a reporting period for amounts in excess of management’s expectations, the Company’s consolidated financial statements for that reporting period could be materially adversely affected.

The information set forth in Note 16 to the consolidated financial statements in this Annual Report on Form 10-K is incorporated by reference into this Item 3.

Not applicable.

PART II

We are a smaller reporting company as defined in Item 10(f)(1) of Regulation S-K and thus are not required to provide the performance graph required in paragraph (e) of Item 201 of Regulation S-K.

Our common stock is traded on the NASDAQ Global Market under the symbol “SYPR.”

As of March 10, 2021, there were 593 holders of record of our common stock. No cash dividends were declared during 2020 or 2019.

Dividends may be paid on common stock only when, as and if declared by our Board of Directors in its sole discretion. We do not anticipate paying dividends in 2021.

The following table summarizes the shares of common stock that were repurchased by the Company – all from its current or former employees for withholding tax purposes – during the fourth quarter ended December 31, 2020: 

We are a smaller reporting company as defined in Item 10(f)(1) of Regulation S-K and thus are not required to report the selected financial data in Item 301 of Regulation S-K.

The following discussion of our consolidated results of operations and financial condition should be read together with the other financial information and consolidated financial statements included in this Annual Report on Form 10-K. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from the results anticipated in the forward-looking statements as a result of a variety of factors, including those discussed in “Item 1A. Risk Factors” and elsewhere in this Annual Report on Form 10-K.

Overview

We are a diversified provider of truck components, oil and gas pipeline components and aerospace and defense electronics. We offer a wide range of manufactured products, often under multi-year sole-source contracts.

We are organized into two business segments, Sypris Technologies and Sypris Electronics. Sypris Technologies, which is comprised of Sypris Technologies, Inc. and its subsidiaries, generates revenue primarily from the sale of forged, machined, welded and heat-treated steel components primarily for heavy commercial vehicle and high-pressure energy pipeline applications. Sypris Electronics, which is comprised of Sypris Electronics, LLC, generates revenue primarily through circuit card and full “box build” manufacturing, high reliability manufacturing, systems assembly and integration, design for manufacturability and design to specification work.

We focus on those markets where we believe we have the expertise, qualifications and leadership position to sustain a competitive advantage. We target our resources to support the needs of industry participants that embrace technological innovation and flexibility, coupled with multi-year contractual relationships, as a strategic component of their supply chain management. These contracts, many of which are sole-source by part number, have historically created opportunities to invest in leading-edge processes or technologies to help our customers remain competitive. The productivity and innovation that can result from such investments helps to differentiate us from our competition when it comes to cost, quality, reliability and customer service.

Impact of COVID-19 on Our Business

The COVID-19 pandemic has resulted, and is likely to continue to result, in significant economic disruption and has and will likely continue to adversely affect our business. As of the date of this filing, significant uncertainty exists concerning the continued impact and duration of the COVID-19 pandemic. The Company has continued to operate at each location and sought to remain compliant with government regulations imposed due to the COVID-19 pandemic. The Company began to experience lower revenue late in the first quarter of 2020 due to the COVID-19 pandemic, followed by a more significant impact in the second quarter, especially within the Sypris Technologies group. During periods of lower production, the Company performed certain preventative maintenance procedures on its equipment and utilized resources to continue to make progress on certain strategic initiatives. Towards the end of the second quarter, some state and local jurisdictions started to lift mandatory stay-at-home or shelter-in-place orders and started gradually to ease restrictions. While the COVID-19 pandemic negatively impacted the Company’s results of operations, cash flows and financial position in 2020, management implemented actions to mitigate the financial impact, to protect the health of its employees and to comply with government regulations at each of our locations. Factors deriving from the COVID-19 response that have and may continue to negatively impact sales and gross margin in the future include, but are not limited to: limitations on the ability of our suppliers to manufacture, or procure from manufacturers, the material components we utilize in the manufacture of the products we sell, or to meet delivery requirements and commitments; limitations on the ability of our employees to perform their work due to illness caused by the pandemic or local, state, or federal orders requiring employees to remain at home; limitations on the ability of our customers to conduct their business and purchase our products; and limitations on the ability of our customers to pay us on a timely basis.

We experienced disruptions in our business as we implemented modifications to preserve adequate liquidity and ensure that our business continued to operate during this uncertain time. With respect to liquidity, we evaluated and took actions to reduce costs and spending across our organization. This included reducing hiring activities, reducing compensation of our Chairman, President and CEO, certain other senior leadership and corporate personnel and our Board of Directors, and limiting discretionary spending. In addition, under the CARES Act, we have deferred certain payroll taxes into future years. We also reduced spending on capital investment projects and managed working capital to preserve liquidity during this crisis. In addition to these activities, during the second quarter, the Company secured a $3.6 million term loan with BMO, pursuant to the PPP under the CARES Act. Proceeds from the PPP Loan have been used to retain workers and maintain payroll and make lease and utility payments.

While we are unable to determine or predict the nature, duration or scope of the overall impact the COVID-19 pandemic will have on our business, results of operations, liquidity or capital resources, we will continue to actively monitor the situation and may take further actions that alter our business operations as may be required by federal, state or local authorities or that we determine are in the best interests of our employees, customers, suppliers and shareholders.

Sypris Technologies Outlook

After two years of record high volumes, the commercial vehicle market softened materially during the fourth quarter of 2019, impacting production rates as customers responded to the demand reduction and balanced inventory levels. This anticipated cyclical decline, coupled with the impact of the COVID-19 pandemic, resulted in a significant decline in North American Class 4-8 shipments in 2020, with Class 8 production dropping nearly 31% from the prior year. In 2020, Sypris Technologies experienced a significant reduction in demand from customers serving the automotive, commercial vehicle, sport utility vehicle and off-highway markets, and the significant drop in oil prices has created uncertainty for many of the energy infrastructure projects utilizing the components we produce and sell. Sypris Technologies’ revenue was negatively impacted at the end of the first quarter of 2020 and was more significantly impacted during the second quarter contributing to a 55.9% decline from the second quarter of 2019. However, demand improved during the second half of 2020, declining only 15.7% from the second half of 2019. We are anticipating year-over-year growth in 2021. We believe that the market diversification Sypris Technologies has accomplished over recent years by adding new programs in the automotive, sport-utility and off-highway markets has benefited and will continue to benefit the Company, as demand for our products in these markets did not decline as dramatically as demand declined in the Class 8 commercial vehicle market.

Depressed oil and gas prices coupled with reduced travel, business closures, and other economic impacts related to the COVID-19 pandemic are suppressing near-term oil and natural gas demand, which has adversely impacted the oil and gas markets served by our Tube Turns® brand of engineered product lines. This is causing major pipeline developers to significantly scale back near term capital investments in new pipeline infrastructure. This has resulted in reduced demand for our products for the oil and gas markets. However, we expect oil and gas sector spending to improve in 2021 compared to 2020.

We will continue to pursue new business in a wide variety of markets from light automotive to new energy related product lines to achieve a more balanced portfolio across our customers, markets and products.

Sypris Electronics Outlook

In accordance with the DoD guidance issued in March 2020 designating the Defense Industrial Base as a critical infrastructure workforce, our Sypris Electronics production facility continued to operate in support of essential products and services required to meet national security commitments to the U.S. Government and the U.S. military.

The U.S. Government has taken actions in response to COVID-19 to increase progress payments in new and existing contracts and accelerate contract awards through increased use of Undefinitized Contracting Actions (UCAs) to provide cash flow and liquidity for companies in the Defense Industrial Base, including large prime contractors and smaller suppliers. Certain of the large prime contractors are implementing multiple actions to help support certain suppliers affected by COVID-19, including accelerating payments to subcontractors, such as Sypris Electronics. 

In the past few years, we have faced challenges within Sypris Electronics, including certain electronic component shortages and extensive lead-time manufacturing issues. This had a negative impact on our production schedules and margin performance in 2019. However, these negative impacts did not persist in 2020, as many of the component shortages and issues were resolved in 2019 and in early 2020. The majority of the government aerospace and defense programs that we support require specific components that are sole-sourced to specific suppliers; therefore, the resolution of supplier constraints requires coordination with our customers or the end-users of the products. We have partnered with our customers to qualify alternative components or suppliers and will continue to focus on our supply chain to attempt to mitigate the impact of supply component shortages on our business. While the COVID-19 outbreak did not have a material impact on our supply chain in 2020, overall component shortages may become a challenge in 2021. We may not be successful in addressing these shortages and other issues.

During 2019 and 2020, we announced new program awards as a contractor for Sypris Electronics, with certain programs contributing to revenue in 2020 and continuing into 2022. In addition to contract awards from U.S. Department of Defense (“DoD”) prime contractors related to weapons systems, electronic warfare and infrared countermeasures in our traditional aerospace and defense markets, we have also been awarded subcontracts related to the communication and navigation markets, which align with our advanced capabilities for delivering products for complex, high cost of failure platforms.

On December 27, 2020, the President of the United States signed the fiscal year (FY) 2021 Consolidated Appropriations Act, providing annual funding for the DoD, other government agencies, and COVID-19 relief. The appropriations provide $741 billion in discretionary funding for national defense (including DoD funding and defense-related spending in energy and water development, homeland security, and military construction appropriations), of which $671 billion is in base funding and $69 billion is OCO/emergency funding (OCO and emergency supplemental funding do not count toward discretionary spending caps). Of the $741 billion, the DoD was allocated $704 billion, composed of $635 billion in base funding and $69 billion in OCO and emergency funding. The appropriations adhere to the Bipartisan Budget Act of 2019 (BBA 2019), which increased the spending limits for both defense and non-defense discretionary funds for the final two years (FY 2020 and FY 2021) of the Budget Control Act of 2011 (BCA).

It remains uncertain when the government will approve FY 2021 appropriations and what government programs will be funded and at what levels. We expect to compete for follow-on business opportunities as a subcontractor on future builds of several existing government programs. However, the long-term impacts of COVID-19 on government budgets and other funding priorities that impact demand for our products and services and our business are difficult to predict. 

Critical Accounting Policies and Estimates

The preparation of the consolidated financial statements and accompanying notes in conformity with U.S. generally accepted accounting principles requires that we make estimates and assumptions that affect the amounts reported. Changes in facts and circumstances could have a significant impact on the resulting estimated amounts included in our consolidated financial statements. We believe the following critical accounting policies affect our more complex judgments and estimates. We also have other policies that we consider to be key accounting policies, such as our policies for revenue recognition for Sypris Technologies, including cost of sales; however, these policies do not meet the definition of critical accounting policies because they do not generally require us to make estimates or judgments that are difficult or subjective. The following discussion of accounting estimates is intended to supplement the Summary of Significant Accounting Policies presented as Note 1 to our consolidated financial statements in Item 8.

Net Revenue and Cost of Sales. The Company recognizes revenue when it satisfies a performance obligation by transferring control of a promised product or rendering a service to a customer. The amount of revenue recognized reflects the consideration the Company expects to be entitled to in exchange for the product or service (the “transaction price”). The Company’s transaction price in its contracts with customers is generally fixed; no payment discounts, rebates or refunds are included within its contracts. The Company does not provide service-type warranties, nor does it allow customer returns. In connection with the sale of various parts to customers, the Company is subject to typical assurance warranty obligations covering the compliance of the electronics parts produced to agreed-upon specifications (See Note 1 to the consolidated financial statements in this Annual Report on Form 10-K). Customer returns, when they occur, relate to quality rework issues and are not connected to any repurchase obligation of the Company.

A performance obligation is a promise in a contract to transfer a distinct product or render a service to a customer and is the unit of account to which the transaction price is allocated under ASC 606, Revenue from Contracts with Customers. When a contract contains multiple performance obligations, we allocate the transaction price to the individual performance obligations using the price at which the promised goods or services would be sold to customers on a standalone basis. For most sales within our Sypris Technologies segment and a portion of sales within Sypris Electronics, control transfers to the customer at a point in time. Indicators that control has transferred to the customer include the Company having a present right to payment, the customer obtaining legal title and the customer having the significant risks and rewards of ownership. The Company’s principal terms of sale are FOB Shipping Point, or equivalent, and, as such, the Company primarily transfers control and records revenue for product sales upon shipment.

For contracts where Sypris Electronics serves as a contractor for aerospace and defense companies under federally funded programs, we generally recognize revenue over time as we perform due to the continuous transfer of control to the customer. This continuous transfer of control to the customer is supported by clauses in the contracts that allow the customer to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. Because control is transferred over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. We use labor hours incurred as a measure of progress for these contracts because it best depicts the Company’s performance of the obligation to the customer, which occurs as we incur labor on our contracts. Under this measure of progress, the extent of progress towards completion is measured based on the ratio of labor hours incurred to date to the total estimated labor hours at completion of the performance obligation.

Our contract profit margins may include estimates of revenues for goods or services on which the customer and the Company have not reached final agreements, such as contract changes, settlements of disputed claims, and the final amounts of requested equitable adjustments permitted under the contract. These estimates are based upon management’s best assessment of the totality of the circumstances and are included in our contract profit based upon contractual provisions and our relationships with each customer.

Long-lived asset impairment. We perform periodic impairment analysis on our long-lived amortizable assets whenever events or circumstances indicate that the carrying amount of such assets may not be recoverable. When indicators are present, we compare the estimated future undiscounted net cash flows of the operations to which the assets relate to their carrying amount. If the operations are unable to recover the carrying amount of their assets, the long-lived assets are written down to their estimated fair value. Fair value is determined based on discounted cash flows, third party appraisals or other methods that provide appropriate estimates of value. A considerable amount of management judgment and assumptions are required in performing the impairment test, principally in determining whether an adverse event or circumstance has triggered the need for an impairment review. The Company did not have any long-lived assets measured at fair value on a nonrecurring basis as of December 31, 2020 or 2019.

Pension Plan Funded Status. Our U.S. defined benefit pension plans are closed to new entrants and only $5,000 of service-related cost was recorded in 2020 related to a small number of participants who are still accruing benefits in the Louisville Hourly and Salaried Plans. Changes in our net obligations are principally attributable to changing discount rates and the performance of plan assets. Pension obligations are valued using discount rates established annually in consultation with our outside actuarial advisers using a theoretical bond portfolio, adjusted according to the timing of expected cash flows for our future obligations. Plan liabilities at December 31, 2020 are based upon a discount rate of 2.25% which reflects the Above Mean Mercer Yield Curve rate as of December 31, 2020 rounded to the nearest 5^th basis point. Declining discount rates increase the present value of future pension obligations; a 25 basis point decrease in the discount rate would increase our U.S. pension liability by about $0.9 million. As indicated above, when establishing the expected long-term rate of return on our U.S. pension plan assets, we consider historical performance and forward looking return estimates reflective of our portfolio mix and investment strategy. Based on the most recent analysis of projected portfolio returns, we concluded that the use of 3.15% for the Louisville Hourly Plan, 3.40% for the Marion Plan and 3.05% for the Louisville Salaried Plan as the expected return on our U.S. pension plan assets for 2020 was appropriate. A change in the assumed rate of return on plan assets of 100 basis points would result in a $0.3 million change in the estimated 2020 pension expense.

At December 31, 2020, we have $13.3 million of unrecognized losses relating to our U.S. pension plans. Actuarial gains and losses, which are primarily the result of changes in the discount rate and other assumptions and differences between actual and expected asset returns, are deferred in Accumulated Other Comprehensive Income and amortized to expense following the corridor approach. We use the average remaining service period of active participants unless almost all of the plan’s participants are inactive, in which case we use the average remaining life expectancy for all active and inactive participants.

Based on the current funded status of our U.S. plans, we expect to contribute approximately $0.6 million during 2021, which represents the minimum funding amounts required by federal law.

Reserve for Excess, Obsolete and Scrap Inventory. We record inventory at the lower of cost, determined under the first-in, first-out method, or net realizable value, and we reserve for excess, obsolete or scrap inventory. These reserves are primarily based upon management’s assessment of the salability of the inventory, historical usage of raw materials, historical demand for finished goods and estimated future usage and demand. An improper assessment of salability or improper estimate of future usage or demand, or significant changes in usage or demand could result in significant changes in the reserves and a positive or a negative impact on our consolidated results of operations in the period the change occurs.

Stock-based Compensation. We account for stock-based compensation in accordance with the fair value recognition provisions using the Black-Scholes option-pricing method, which requires the input of several subjective assumptions. These assumptions include estimating the length of time employees will retain their vested stock options before exercising them (expected term) and the estimated volatility of our common stock price over the expected term. The dividend yield is assumed to be zero as we have not paid dividends nor do we anticipate paying any dividends in the foreseeable future. Changes in the subjective assumptions can materially affect the fair value estimate of stock-based compensation and consequently, the related expense recognized in the consolidated statements of operations.

Income Taxes. We account for income taxes as required by the provisions of ASC 740, Income Taxes, under which deferred tax assets and liabilities are recognized for the tax effects of temporary differences between the financial reporting and tax bases of assets and liabilities measured using enacted tax rates.

Management judgment is required in determining income tax expense and the related balance sheet amounts. In addition, under ASC 740-10, Accounting for Uncertainty in Income Taxes, judgments are required concerning the ultimate outcome of uncertain income tax positions. Actual income taxes paid may vary from estimates, depending upon changes in income tax laws, actual results of operations and the final audit of tax returns by taxing authorities. Tax assessments may arise several years after tax returns have been filed. We believe that our recorded income tax liabilities adequately provide for the probable outcome of these assessments.

Deferred tax assets are also recorded for operating losses and tax credit carryforwards. However, ASC 740 requires that a valuation allowance be recorded when it is more likely than not that some portion or all of the deferred tax assets will not be realized. This assessment is largely dependent upon projected near-term profitability including the effects of tax planning. Deferred tax assets and liabilities are determined separately for each tax jurisdiction in which we conduct our operations or otherwise incur taxable income or losses. The Company evaluates its deferred tax position on a quarterly basis and valuation allowances are provided as necessary. During this evaluation, the Company reviews its forecast of income in conjunction with other positive and negative evidence surrounding the realizability of its deferred tax assets to determine if a valuation allowance is needed. Based on its current forecast, the Company believes it will have sufficient future taxable income to realize the deferred tax assets recorded by its Mexican subsidiaries. Therefore, the Company reversed its valuation allowance recorded in prior years against certain Mexican net deferred tax assets and recognized an income tax benefit of $3.7 million during the year ended December 31, 2020.

Based on its current forecast, the Company has established a valuation allowance against all U.S. deferred tax assets. Until an appropriate level and characterization of profitability is attained, the Company expects to continue to maintain a valuation allowance on its net deferred tax assets related to future U.S. tax benefits. If we determine that we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment to reduce the valuation allowance would increase net income in the period that such determination is made. 

Results of Operations

We operate in two segments, Sypris Technologies and Sypris Electronics. The table presented below compares our segment and consolidated results of operations from 2020 to 2019. The table presents the results for each year, the change in those results from one year to another in both dollars and percentage change and the results for each year as a percentage of net revenue.

In addition, as used in the table, “NM” means “not meaningful.”

Year Ended December 31, 2020 Compared to Year Ended December 31, 2019

Net Revenue. Sypris Technologies derives its revenue from the sale of forged and finished steel components and subassemblies and high-pressure closures and other fabricated products. Net revenue for Sypris Technologies decreased $16.4 million from the prior year to $45.3 million in 2020 as a result of the expected cyclical decline in the commercial vehicle market and the impact of the COVID-19 pandemic, as noted above. The net revenue decrease for the year ended December 31, 2020 was primarily attributable to decreased sales volumes of $13.8 million primarily with customers in the commercial vehicle market and decreased energy related product sales of $6.7 million, partially offset by growth in the automotive, light truck and sport utility markets of $4.1 million. Revenue for Sypris Technologies is expected to increase in 2021, primarily attributable to the expected improvement in the commercial vehicle market and the addition of new program launches.

Sypris Electronics derives its revenue primarily from circuit card and full “box build” manufacturing, high reliability manufacturing and systems assembly and integration. Net revenue for Sypris Electronics increased $10.8 million to $37.0 million in 2020. The year over year revenue growth reflects increased demand for a government funded product, shipments on a weapons system program that was in development and early build during 2019 and increased orders on certain commercial subsea communications components. Revenue for 2019 was partially affected by shortages of certain electronic components and extensive lead-time issues in the electronic manufacturing industry. Revenue for 2019 was also impacted by shipments accelerated into the fourth quarter of 2018 as the Company planned for the implementation of a new ERP system effective in January 2019. Most of the challenges faced during 2019 with electronic component shortages have been resolved and production rebounded to more normal run rates during 2020. The majority of programs that generated revenue in 2020 will continue to generate revenue into 2021.

Gross Profit. Sypris Technologies’ gross profit decreased $3.6 million to $6.2 million in 2020 as compared to $9.8 million in the prior year. The net decrease in volumes contributed to a decrease in gross profit of $6.8 million for the year ended December 31, 2020. Partially offsetting this decrease were improvements in productivity, utilities, scrap and rework expense. During 2019, the results for the period were negatively impacted by additional start-up costs on new programs, including lower productivity, higher supply consumption and scrap and rework expense. Additionally, utility costs were higher in 2019 as more production occurred during peak electrical rate periods. Management implemented programs to control variable and fixed spend during 2020 in response to the sharp decline in revenue attributable to the COVID-19 pandemic. In the operations most dramatically impacted by the reduction in demand, these programs included initiatives to retain the workforce necessary to support future demand in anticipation of reduced impacts of COVID-19.

Sypris Electronics’ gross profit increased $5.3 million to $5.4 million as compared to $0.1 million in the prior year. The increase in gross profit was primarily as a result of the growth in revenue during 2020. Certain programs contributing to the improvement in revenue and gross margin for the year reached their expected quarterly run rates during 2020 and allowed management to more efficiently balance production and to improve overhead absorption. The order backlog for Sypris Electronics supported a stable revenue rate during the year ended December 31, 2020 and price increases on certain programs also contributed to margin expansion in comparison with the previous year.

Selling, General and Administrative. Selling, general and administrative expense decreased $2.3 million to $11.4 million in 2020 as compared to $13.7 million in 2019 as a result of a reduction in spending across the Company. This included reducing hiring activities, reducing compensation for our Chairman, President and CEO and certain other senior leadership and corporate personnel and our Board of Directors, and limiting discretionary spending. We also had a reduction in consultation costs associated with the Company’s new ERP implementation effective in January 2019.

Severance, Relocation and Other Costs. Severance, relocation and other costs were $0.1 million and $0.5 million for the years ended December 31, 2020 and 2019, respectively. The charges for 2020 and 2019 were primarily related to mothball costs associated with the closure of the Broadway Plant (see Note 4 to the consolidated financial statements in this Annual Report on Form 10-K).

Other Expense (Income), Net. Other expense (income), net, was expense of $0.5 million in 2020 as compared to income of $1.3 million for 2019. During the year ended December 31, 2020, the Company completed the sale of the Broadway Plant real estate for $1.7 million and other idle assets for $0.3 million and recognized net gains of $0.8 million (see Note 4 to the consolidated financial statements included in this Annual Report on Form 10-K). The $0.8 million gain on disposal was offset by a loss on the abandonment of assets of $0.6 million and pension expense of $0.7 million. Foreign currency related expenses were not material for the year ended December 31, 2020.

During 2019, the Company recognized a gain in other income of $1.5 million related to a settlement agreement reached with one of its customers during the year (see Note 5 to the consolidated financial statements in this Annual Report on Form 10-K). Additionally, the Company recognized a net gain of $0.7 million related to the sale of idle assets within Sypris Technologies, offset by pension expense of $1.0 million.

Income Taxes. The 2020 income tax provision consists of current tax expense of $0.1 million and a deferred tax benefit of $3.1 million. The current tax expense in 2020 and 2019 includes taxes paid by our Mexican subsidiaries and domestic state income taxes and adjustments. The 2020 deferred tax benefit includes a $3.7 million benefit from the change in the valuation allowance for our Mexican subsidiaries, partially offset by net changes in the foreign deferred tax assets during the year. The 2019 deferred tax benefit includes a $0.2 million benefit recorded due to the required intraperiod tax allocation resulting from the loss from continuing operations and other comprehensive income.

Deferred tax assets and liabilities are determined separately for each tax jurisdiction in which we conduct our operations or otherwise incur taxable income or losses. The Company evaluates its deferred tax position on a quarterly basis and valuation allowances are provided as necessary. During this evaluation, the Company reviews its forecast of income in conjunction with other positive and negative evidence surrounding the realizability of its deferred tax assets to determine if a valuation allowance is needed. Based on its current forecast, the Company believes it will have sufficient future taxable income to realize the deferred tax assets recorded by its Mexican subsidiaries. Therefore, the Company reversed its valuation allowance recorded in prior years against certain Mexican net deferred tax assets and recognized an income tax benefit of $3.7 million during the year ended December 31, 2020.

Based on its current forecast, the Company has established a valuation allowance against all U.S. deferred tax assets. Until an appropriate level and characterization of profitability is attained, the Company expects to continue to maintain a valuation allowance on its net deferred tax assets related to future U.S. tax benefits. If we determine that we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment to reduce the valuation allowance would increase net income in the period that such determination is made. 

Quarterly Results

The following table presents our unaudited condensed consolidated statements of operations data for each of the eight quarters in the two-year period ended December 31, 2020. The quarterly results are presented on a 13-week period basis. We have prepared this data on the same basis as our audited consolidated financial statements and, in our opinion, have included all normal recurring adjustments necessary for a fair presentation of this information. You should read these unaudited quarterly results in conjunction with our consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K. The consolidated results of operations for any quarter are not necessarily indicative of the results to be expected for any subsequent period. The sum of quarterly earnings per share may differ from the full-year amounts due to rounding.

Liquidity and Capital Resources

Paycheck Protection Program. The Company secured the PPP Loan under the CARES Act during the second quarter of 2020. Proceeds from the PPP Loan have been used to retain workers and maintain payroll and make lease and utility payments. The PPP Loan is evidenced by a promissory note in favor of BMO, as lender, with a principal amount of $3.6 million that bears interest at a fixed annual rate of 1.00%. The term of the PPP Loan is two years, with no payments due under the PPP Loan until July 2021, although interest will accrue during the deferment period. Beginning July 2021, the Company will pay equal monthly installments of principal and interest in the amount necessary to fully amortize the PPP Loan through the Maturity Date, less any amount of potential forgiveness. Recent legislation under the Paycheck Protection Program Flexibility Act of 2020 provides for an extension of the maturity date up to five years, an extension of the principal and interest deferral period to the date of a loan forgiveness determination and modifications to the debt amortization schedule if the Company and BMO reach an agreement on modified terms. The PPP Loan may be accelerated upon the occurrence of an event of default.

Under the terms of the CARES Act, all or a portion of the principal of the PPP Loan may be forgiven. Such forgiveness will be determined, subject to limitations, based on the use of the PPP Loan proceeds for payroll costs, mortgage interest payments, lease payments or utility payments. On November 24, 2020, the Company submitted an application for forgiveness of the entire amount due on the PPP Loan. As of December 31, 2020, the Company has not made any principal or interest payments related to the PPP Loan. The Company cannot provide assurance that the principal and interest amounts under the PPP Loan will be forgiven. See Item 1A. Risk Factors of this Annual Report on Form 10-K.

Gill Family Capital Management Note. The Company has received the benefit of cash infusions from GFCM in the form of secured promissory note obligations totaling $6.5 million in principal as of December 31, 2020 and 2019 (the “Note”). GFCM is an entity controlled by the Company’s Chairman, President and Chief Executive Officer, Jeffrey T. Gill and one of our directors, R. Scott Gill. GFCM, Jeffrey T. Gill and R. Scott Gill are significant beneficial stockholders of the Company.

During the fourth quarter of 2020, the Company amended its secured promissory note obligation with GFCM to, among other things: (i) extend the maturity dates by one year for (a) $2.5 million of the obligation from April 1, 2021 to April 1, 2022, (b) $2.0 million of the obligation from April 1, 2023 to April 1, 2024 and (c) the balance of the obligation from April 1, 2025 to April 1, 2026; (ii) extend the allowance for up to an 18-month deferral of payment for up to 60% of the interest due on the notes maturing in April of 2022 and 2024; (iii) provide for the reinstatement of a first security interest in the assets of Sypris Electronics, LLC; and (iv) provide for payment on January 4, 2021 of any accrued but unpaid interest for 2020. All other terms of the Note, as amended, remain in place. The Note provides for a first security interest in substantially all of the Company’s assets, including those in Mexico (see Note 13 to the consolidated financial statements in this Annual Report on Form 10-K).

Finance Lease Obligations. On March 9, 2016, the Company completed the sale of its 24-acre Toluca property for 215 million Mexican Pesos, or approximately $12.2 million in U.S. dollars. Simultaneously, the Company entered into a ten-year lease of the 9 acres and buildings currently occupied by the Company and needed for its ongoing business in Toluca. As a result of the Toluca Sale-Leaseback, the Company has a finance lease obligation of $2.1 million for the building as of December 31, 2020.

In February 2019, the Company entered into a finance lease for $0.3 million for new machinery at its Sypris Technologies facility in the U.S. The balance of the lease obligation as of December 31, 2020 was $0.2 million.

Purchase Commitments. We also had purchase commitments totaling approximately $15.4 million at December 31, 2020, primarily for inventory.

Cash Balance. At December 31, 2020, we had approximately $11.6 million of cash and cash equivalents, of which $3.2 million was held in jurisdictions outside of the U.S. that, if repatriated, could result in withholding taxes. We expect existing cash and cash flows of operations to continue to be sufficient to fund our operating activities and cash commitments for investing and financing activities, such as capital expenditures, for at least the next 12 months.

We have projected that our cash and cash equivalents will be sufficient to allow us to continue operations for the next 12 months. Significant changes from our current forecasts, including, but not limited to: (i) meaningful shortfalls in our projected revenues, (ii) unexpected costs or expenses, and/or (iii) operating difficulties which cause unexpected delays in scheduled shipments, could require us to seek additional funding or force us to make further reductions in spending, extend payment terms with suppliers, liquidate assets where possible and/or suspend or curtail planned programs. Any of these actions could materially harm our business, results of operations and future prospects.

Cash Flows from Operating, Investing and Financing Activities

Operating Activities. Net cash provided by operating activities was $3.6 million in 2020, as compared to net cash used of $5.9 million in 2019. The aggregate decrease in accounts receivable in 2020 resulted in a source of cash of $0.2 million as a result of a $1.4 million early payment by a customer at the end of 2020 partially offset by an increase in fourth quarter revenue with customers in the commercial vehicle market. The decrease in inventory in 2020 resulted in a source of cash of $4.2 million. The decrease in inventory primarily relates to inventory within Sypris Electronics, as shipments on programs using inventory procured in prior periods increased in 2020. Additionally, there was a decrease in accounts payable during 2020, which resulted in a usage of cash of $2.6 million. Prepaid expenses and other assets increased during 2020, resulting in a usage of cash of $0.2 million, primarily as a result of an increase in contract assets. Accrued and other liabilities increased during 2020, resulting in a source of cash of $0.4 million, primarily as a result of an increase in pension related liabilities.

Investing Activities. Net cash provided by investing activities was $0.4 million in 2020 as compared to $1.0 million in 2019. Net cash provided by investing activities for the year ended December, 31, 2020 includes proceeds of $2.0 million from the sale of idle assets by Sypris Technologies during the period partially offset by capital expenditures of $1.5 million.

Net cash provided by investing activities for the year ended December, 31, 2019 includes proceeds of $1.9 million from the sale of idle assets by Sypris Technologies during the period partially offset by capital expenditures of $0.9 million.

Financing Activities. Net cash provided by financing activities was $2.7 million in 2020 as compared to net cash used of $0.8 million in 2019. Net cash provided by financing activities in 2020 included proceeds of $3.6 million under the PPP Loan, as described above, partially offset by finance lease payments of $0.7 million and payments of $0.1 million for minimum statutory tax withholdings on stock-based compensation. Net cash used in financing activities in 2019 included finance lease payments of $0.6 million and payments of $0.2 million for minimum statutory tax withholdings on stock-based compensation.

Off-Balance Sheet Arrangements

On December 31, 2020, we had no material off-balance sheet arrangements.

Recent Accounting Pronouncements

See Note 1 to our consolidated financial statements for a full description of recent accounting pronouncements, including the respective dates of adoption and effects on our results of operations and financial condition.

We are a smaller reporting company as defined in Item 10(f)(1) of Regulation S-K and thus are not required to provide the quantitative and qualitative disclosures about market risk specified in Item 305 of Regulation S-K.

SYPRIS SOLUTIONS, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm

Stockholders and the Board of Directors of Sypris Solutions, Inc.

Louisville, Kentucky

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Sypris Solutions, Inc. (the “Company”) as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020 and 2019, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.

/s/ Crowe LLP

We have served as the Company’s auditor since 2014.

Louisville, Kentucky

March 18, 2021

SYPRIS SOLUTIONS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except for per share data)

The accompanying notes are an integral part of the consolidated financial statements.

SYPRIS SOLUTIONS, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

(in thousands)

The accompanying notes are an integral part of the consolidated financial statements.

SYPRIS SOLUTIONS, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except for share data)

The accompanying notes are an integral part of the consolidated financial statements.

SYPRIS SOLUTIONS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

The accompanying notes are an integral part of the consolidated financial statements.

SYPRIS SOLUTIONS, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(in thousands, except for share data)

The accompanying notes are an integral part of the consolidated financial statements.

SYPRIS SOLUTIONS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2020 and 2019

SYPRIS SOLUTIONS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – CONTINUED

SYPRIS SOLUTIONS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – CONTINUED