UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2020

or

For the transition period from __________ to __________.

Commission File Number 001-38348

RANPAK HOLDINGS CORP.

(Exact name of registrant as specified in its charter)

7990 Auburn Road

Concord Township, Ohio 44077

(Address of principal executive offices) (Zip Code)

(440) 354-4445

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:  None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of shares of Class A common stock, par value $0.0001 per share held by non-affiliates of the registrant was approximately $264,910,754, based on the closing sale price of $7.44 per share as reported on the New York Stock Exchange on June 30, 2020.

As of March 2, 2021, the registrant had 69,053,220 of its Class A common shares, $0.0001 par value per share, outstanding and 6,511,293 of its Class C common shares, $0.0001 par value per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Ranpak Holdings Corp.

Annual Report on Form 10-K

For the Fiscal Year Ended December 31, 2020

Table of Contents

Cautionary Notice Regarding Forward-Looking Statements

All statements other than statements of historical fact included in this Annual Report on Form 10-K (“Report”), including, without limitation, statements under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” regarding our financial position, business strategy and the plans and objectives of management for future operations, are forward-looking statements. When used in this Report, words such as “may,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “continue,” or the negative of such terms or other similar expressions, as they relate to us or our management, identify forward-looking statements.

The forward-looking statements contained in this Report and the Exhibits attached hereto are based on our current expectations and beliefs concerning future developments and their potential effects on us taking into account information currently available to us. There can be no assurance that future developments affecting us will be those that we have anticipated. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements. These risks include, but are not limited to:

PART I

Throughout this Report, when we refer to “Ranpak,” the “Company,” “we,” “our,” or “us,” we are referring to Ranpak Holdings Corp. and all of our subsidiaries, except where the context indicates otherwise.

Unless otherwise noted, references to a particular year are to our fiscal year, which corresponds to the calendar year ended or ending on December 31 of the same year.  For example, a reference to “2020” is a reference to the year ended December 31, 2020.

In November 2020, the SEC enacted changes to a number of financial disclosure requirements in Regulation S-K aiming to streamline and reduce duplicative disclosure by eliminating certain prescribed information in favor of a more principles-based approach (collectively, the “November 2020 Amendments”).  The November 2020 Amendments were published in the Federal Register on January 11, 2021 and became effective on February 10, 2021.  Under the November 2020 Amendments, we are permitted to provide disclosure consistent with the recent amendments at any time after February 10, 2021.  We have elected to provide certain disclosure consistent with the November 2020 Amendments throughout this Report.

Non-U.S. Generally Accepted Accounting Principles (“GAAP”) Information

The financial statements separate the Company’s presentation into distinct periods.  The periods before the closing of the Ranpak Business Combination (herein defined) depict the financial statements of Rack Holdings and its subsidiaries (the “Predecessor”).  The period from January 1, 2019 through June 2, 2019 is further referred to herein as the “1H 2019 Predecessor Period.”  All periods subsequent to June 3, 2019 after the consummation of the Ranpak Business Combination depict the financial statements of the Company, including the consolidation of One Madison Corporation with Rack Holdings (the “Successor”).  As a result of the application of the acquisition method of accounting under the scope of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 805, Business Combinations (“ASC 805”) as of the closing of the Ranpak Business

1

Combination, the financial statements for the Predecessor periods and for the Successor periods are presented on a different basis of accounting and are, therefore not comparable.  

Due to the Predecessor and Successor periods, for the convenience of readers, we have presented the 12-month period ended December 31, 2019 on a combined basis (reflecting simple arithmetic combination of the GAAP Predecessor and Successor Periods without further adjustment) in certain areas of this Report in order to present a meaningful comparison against the corresponding period in 2020 or 2018.

Our consolidated financial statements are prepared in accordance with U.S. GAAP.  We have, however, also disclosed below Earnings Before Interest, Taxes, Depreciation and Amortization (“EBITDA”) and adjusted EBITDA (“AEBITDA”), which are non-GAAP financial measures.  We have included EBITDA and AEBITDA because they are key measures used by our management and Board of Directors to understand and evaluate our operating performance and trends, to prepare and approve our annual budget and to develop short- and long-term operational plans.  In particular, the exclusion of certain expenses in calculating EBITDA and AEBITDA can provide a useful measure for period-to-period comparisons of our primary business operations.  Accordingly, we believe that EBITDA and AEBITDA provide useful information to investors and others in understanding and evaluating the Company’s operating results in the same manner as our management and Board of Directors.

EBITDA and AEBITDA have limitations as analytical tools, and you should not consider them in isolation or as substitutes for analysis of our results as reported under GAAP.  In particular, EBITDA and AEBITDA should not be viewed as substitutes for, or superior to, net income (loss) prepared in accordance with GAAP as a measure of profitability or liquidity. Some of these limitations are:

EBITDA — EBITDA is a non-GAAP financial measure that we calculate as net income (loss), adjusted to exclude: benefit from (provision for) income taxes; interest expense; and depreciation and amortization.

AEBITDA — AEBITDA is a non-GAAP financial measure that we calculate as net income (loss), adjusted to exclude: benefit from (provision for) income taxes; interest expense; depreciation and amortization; stock-based compensation expense; expenses related to the Ranpak Business Combination and, in certain periods, certain other one-time or non-recurring income and expense items.

We also believe that adjusting these non-GAAP measures for comparability between the Predecessor, Successor and Pro Forma periods is useful to the user of our financial statements.

ITEM 1.  BUSINESS

Our Business

Ranpak is a leading provider of environmentally sustainable, systems-based, product protection solutions and end-of-line automation solutions for e-commerce and industrial supply chains. Since its inception in 1972, Ranpak has delivered high quality protective packaging solutions, while maintaining its commitment to environmental sustainability. We differentiate ourselves by our:

2

These solutions offer numerous benefits including the reduction of shipping costs, waste, and labor, resulting in improved efficiency.

3

Our Product Lines

Our protective packaging systems are designed to be flexible and responsive to the needs of our end-users. The flexibility and breadth of our full range of systems allows us to provide our end-users with the optimal protective solution to meet their specific needs. These protective packaging solutions, which include the accompanying paper consumables, fall into four broad categories:

4

Moreover, unlike many competitive products (e.g., foam, air pillows, bubble wrap, loose fill, etc.), our paper packaging materials are fiber-based, renewable and environmentally sustainable. Our paper consumables do not include plastic or other resin-based components. Instead, they are paper-based and biodegradable, renewable, and curb-side recyclable. Additionally, all of our paper consumables sold to end-users are created from entirely or partially recycled content and the vast majority are sourced from suppliers that are SFI and/or FSC certified. Finally, our consumables ship in bulk which is efficient for customers in shipping and require less storage space than many competing products.

Our Distribution Model

We sell our paper consumable products to an established network of approximately 250 distributors worldwide who, in turn, store, market and sell our products to end-users. Moreover, substantially all of our net revenue from distributors is generated by those who have agreed to exclusivity with our products and not to sell or promote competitors’ paper-based solutions. Our sales and marketing teams, as well as our highly skilled engineers, work closely with distributors and ultimate end-users, on-site or remotely, to optimize the custom configuration and installation of our protective packaging systems at the end-user’s facility. Sales through our global distributor network accounted for 85.5% of our net revenue in 2020.

In addition, we sell our products directly to certain select end-users. In some cases, these end-users operate some of the largest, most complex and sophisticated warehouse operations into which our protective packaging systems are integrated. Our engineering and other teams also assist our direct-sale end-users in ensuring the optimal customized installation of our products at their facilities. Direct sales to end-users accounted for 14.5% of our net revenue in 2020.

Through our distributor network and our direct sales, we serve greater than 33,000 end-users including participants in e-commerce, the auto after-market, electronics, machinery, home goods, industrial, warehousing/transport services, healthcare, and other markets. Our universe of end-users is diverse, with greater than 80.0% of distributor-serviced end-users generating less than $10,000 in net revenue in 2020.

Our Performance

In 2020, we generated net revenue of $298.2 million and $11.7 million of income from operations. Our revenues are geographically diverse, with 42.7% of our 2020 net revenue generated from end-users in North America, 47.0% generated from end-users in Europe, and 10.3% generated from end-users in Asia and other locations. In addition, approximately 61.0% of our net revenue in 2020 was generated from outside the United States.

We also believe, based on our performance during the ongoing COVID-19 pandemic and its macroeconomic impact, as well as the global financial crisis from 2007 to 2010, that our business is relatively resilient to economic recessions due in part to the nature of our input costs, including paper, and our ability to adjust our operations.  During the global financial crisis, declining paper costs and a reduction in our growth capital expenditures enabled us to protect profit margins and grow free cash flow despite reduced sales volume.  So far, the COVID-19 pandemic has highlighted the world economy’s growing emphasis on e-commerce and we have experienced growth in revenues and EBITDA.

Our Strategy

Our strategy for adding to our customer base includes investing in innovation, our sales force and distributor relationships across all end markets as well as expanding geographically. Beyond our leading position in paper-based Void-Fill and Cushioning protective packaging systems, we expect to also focus on other emerging applications, such as Wrapping, Automation, Cold Chain, and retail consumables, for continued growth. While still relatively small, representing 13.0% of our net revenue in 2020, our Wrapping product line expanded in 2014 through the acquisition of Geami, which provides a highly effective and environmentally friendly alternative to plastic bubble wrap, as well as an opportunity to expand our distribution channels into the retail and retail shipping segments. Although our initiative to expand into the retail channel has been delayed due to the ongoing COVID-19 pandemic, we expect to have the opportunity to increase our product line in the future to include environmentally friendly packaging materials directly for sale to customers. Our Automation solution represented only 2.9% of our net revenue in 2020, however, following its development through acquisitions and organic growth to date, we believe it will serve as a platform for expansion to better serve end-users with higher volume requirements and more sophisticated end-of-line needs. Moreover, we seek to increase our penetration with existing customers

5

and broaden our customer base to include business segments that we have not historically served. We will also continue to identify additional product and service opportunities for our current and future end-user markets.  

As the world economy works to recover from the impact of COVID-19, we look to solidify our gains in e-commerce and Void-Fill products, as well as be an integral partner in facilitating the industrial sectors return to normal operations.  We believe these factors contribute to the significant tailwinds for our growth expansion.  

We are pursuing this strategy of expanding our customer base in several ways. We have a global sales organization that works hand-in-hand with the sales representatives of our approximately 250 distributors to introduce all of our products and services to potential accounts in all end markets. Our full range of products allows our organization to serve any type of business with protective packaging needs. We will also seek to broaden our customer base through geographic expansion by enhancing our regional capabilities in sales and marketing and expanding sales of our existing product lines in growth regions, such as Asia-Pacific, South America, and Central and Eastern Europe.

We seek to enhance our position as a leading global provider of innovative sustainable packaging solutions that our customers rely on to improve performance, cost competitiveness and automation to enhance productivity within their operations. In order to achieve these goals, we are focused on the following strategic priorities.

6

Our Products and Services

Our Business Model

We have a full suite of paper-based protective packaging solutions for end-users. These solutions are designed to ensure that our end-users’ products reach their shipping destination in a cost-effective manner with minimal breakage. Our protective packaging solutions fall into four broad categories: Void-Fill, Cushioning, Wrapping, and Automation.

We employ a “razor/razor-blade” business model with respect to the sale of our Void-Fill, Cushioning, and Wrapping solutions. Under this model, we provide our proprietary protective packaging systems to our distributors for a nominal user fee, charged on a per-unit basis. We also provide our systems directly to certain select end-users. We derive substantially all of our net revenue (over 90% in each period presented) through the sale of high-margin paper consumables that work exclusively with our protective systems. Our paper consumables are converted from raw paper through our paper conversion processes, using paper sourced and subsequently converted to our specifications as to a number of factors, including basis weight, tensile strength, directional strength, and moisture content. As our protective systems are designed to use paper consumables that meet these exacting requirements, any end-user that attempted to use another supplier’s paper on our protective systems would encounter substantial negative consequences, such as significant jamming, ineffective yield, and/or other performance deficiencies. We sell these paper consumables under the Void-Fill, Wrapping and Cushioning product lines. We also derive net revenue from user fees, charged on a per unit basis, with respect to those product lines, and from the sale of products under our Automation product line.

We retain ownership of most of our Void-Fill, Cushioning and Wrapping protective systems (other than, e.g., certain disposable Wrapping systems and FillPak^® Manual). This model allows distributors and end-users access to our proprietary systems at little or no capital expense and enables us or our distributors to reclaim un- or under-utilized units for refurbishment and redeployment, which benefits us, our distributors and our end-users through increased efficiency and cost savings. As of December 31, 2020, we had an installed base of approximately 117,400 protective packaging systems.

Each protective system offered under our Void-Fill, Cushioning and Wrapping product lines is distinguished by its level of automation, the speed at which it dispenses paper consumables, the type and form of paper it consumes, and the type of protective paper or pad it produces. We believe we offer the widest variety of paper-based protective packaging systems in the industry. In contrast to some more limited product offerings of our competitors, we have numerous Void-Fill, Cushioning and Wrapping systems, and extensive options to create custom variations.

We convert the vast majority of raw paper at four U.S. and two European production facilities to create rolls and bundles of paper that integrate with our protective packaging systems and into direct or consumable products. Our systems predominantly use kraft paper of varying weights, sizes and configurations. In 2020, 53.8% of our raw paper supply consisted of 100% recycled sheet, 42.2% consisted of 100% virgin sheet, and 4.0% consisted of a blended sheet incorporating both virgin and recycled fiber. We believe we offer the widest variety of bundle, roll sizes and formats in the industry.

For the vast majority of end-users, we work with our distributors to place our protective packaging systems at end-user sites. We sell bundles and rolls to our distributors who, in turn, sell bundles and rolls to end-users for use with our protective packaging systems. In select cases, we place systems with and sell paper directly to end-users.

For each unit, we set targets for minimum annual paper consumption in order to justify the capital deployed to that account. Accordingly, our sales team, in conjunction with our distributors, help our end-users select which unit or units meet their specific needs, based on their own volume requirements and business objectives.

In addition, we have a customized Automation suite of products, which we market under the Ranpak Automation brand, that provides higher volume customers with a highly automated box sizing system, accurate dispensing, labor-free packing, and optimization consulting services.  Ranpak Automation customer’s purchase directly from us the automated box-sizing machines and equipment they need to optimize their end-of-line capabilities.  Often, with respect to our Automation product line, we do not retain ownership of the machines, nor do we customarily have maintenance or support obligations beyond an initial warranty period. However, the automation market is rapidly evolving and we have expanded Automation services to offer extended service within and beyond the initial warranty period, packaging line design solutions, as well as the sale of spare parts. We see this as a potential growth position as the Automation installed base expands.  To service this growth potential, Ranpak Automation opened a dedicated facility in 2020 where our equipment is manufactured and assembled in-house.

Void-Fill

We sell our Void-Fill products under the brand name FillPak^®. We offer a variety of FillPak^® units, each of which is designed to convert paper to fill empty spaces in secondary packages and limit object movement during the shipping process. We introduced our

7

FillPak^® family of products in 2003 to provide an environmentally friendly solution to the growing void-fill market that arose with the explosion of e-commerce. We believe our FillPak^® systems are known in the marketplace for their efficacy, speed, efficiency and reliability.

We have an installed base of approximately 68,000 FillPak^® units as of December 31, 2020. In 2020, our FillPak^® products generated $125.0 million in net revenue, which accounted for 41.9% of our net revenue.

The primary competitors to our Void-Fill product line are plastic air pillows and foam peanuts or loose fill. We believe our Void-Fill product line is superior to each of these competitors for a number of reasons. First, the packaging material is sustainable and environmentally friendly. Our Void-Fill paper packaging material is paper-based, renewable, biodegradable and curb-side recyclable for end consumers. Second, unlike air pillows, our packaging product can more easily fit into void spaces within smaller shipping boxes due to the inherent flexibility of paper. Third, when air pillows are punctured from pressure damages, they lose 100% of their protective packaging properties, whereas paper packaging retains protective properties even when subject to substantial pressure. Fourth, our products provide a better box opening experience, which is important to many e-commerce retailers.

Cushioning

We sell our Cushioning products under the brand name “PadPak^®.” We offer a variety of PadPak^® units, each of which provide protection for fragile objects from shocks and vibrations experienced during the shipping process. These proprietary systems convert paper into cushioning pads by crimping the paper to trap air between the layers and/or winding paper into dense discs for use in cushioning particularly heavy objects for shipping. Our PadPak^® family of products was the original product offering from when our company was founded in 1972. We believe our PadPak^® systems are known in the marketplace for their high level of breakage protection, low in-the-box cost, high-speed throughput and operational reliability.

We have an installed base of approximately 34,000 PadPak^® units as of December 31, 2020. In 2020, our PadPak^® products generated $125.7 million in net revenue, which accounted for 42.2% of our net revenue.  

The primary competitors to our Cushioning product line are foam-in-place, plastic bubble on demand and other competing paper systems. We believe our PadPak^® products are superior to these products for a number of reasons. First, our PadPak^® product line is more environmentally friendly than foam and plastic bubble wrap, as the paper packaging material is entirely paper-based, biodegradable and curb-side recyclable for end consumers, whereas foam products are chemical- and petroleum-based. As a result, foams are not biodegradable and, in production, foam-in-place can release harmful byproducts. Also, foam-in-place, EPE/EPS foams and plastic bubble wrap are of limited recyclability. Second, we believe our PadPak^® cushioning solutions absorb shocks and maintain their shape better than other packaging media, such as plastic bubble wrap, which is not well-suited for sharp or heavy products and can transmit shock to lighter weight products. Third, within an end-user’s facility, we believe our PadPak^® systems require less physical space and less maintenance and are easier to handle than the toxic elements required by packaging systems like polymer-based foam-in-place. Moreover, our PadPak^® systems can be deployed in greater number of configurations, at a higher level of automation, and require less facility space for material storage than bubble wrap applications, and safe storage versus hazardous chemicals like foam-in-place chemicals.

Wrapping

We sell our Wrapping products under the brand names WrapPak^®, Geami^®, and “ReadyRoll.” We manufacture a variety of WrapPak^® and Geami^® converter units. Our WrapPak^® protective packaging systems crimp kraft paper into flat pads that, we believe, are highly effective in wrapping, interleaving, box-lining and cold chain applications.

Our Geami^® product line is a high-end wrapping system that combines tissue paper and kraft paper which is dispensed simultaneously by Geami^® converting machines. The kraft paper is die-cut at our production facilities using a proprietary process, so that when it is dispensed on-site by an end-user the paper expands into a two-dimensional ridged honeycomb. The tissue paper provides surface protection for the wrapped item and separates layers of the honeycomb to maximize its cushioning properties. The resulting Geami construction is ideal for securely wrapping household goods and other fragile items.

We have an installed base of approximately 16,000 WrapPak^® units, which were predominantly Geami^® converter units, as of December 31, 2020. In 2020, Wrapping products generated $38.8 million in net revenue, which accounted for 13.0% of our net revenue.  Geami^® net revenue includes sale of tissue rolls in addition to kraft paper.

We offer both motorized Geami^® dispensing systems and manual systems, where the operator simply pulls the paired sheets against tension to expand the die-cut kraft paper. We also offer the Geami^® combination of die-cut and tissue in a disposable cardboard dispenser as well as in a Geami^®-based offering to be sold directly to consumers without a dispenser in retail stores under the brand

8

name “Ranpak ReadyRoll.” We do not set minimum annual paper consumption targets for the disposable units, as the full production cost and margin associated with the dispenser is covered with each sale.

The primary competitor to our Wrapping product lines is plastic bubble wrap. We believe our Wrapping products are superior to plastic bubble wrap for a number of reasons. First, we believe our Wrapping products are more environmentally friendly, as the paper packaging material is paper-based, curb-side recyclable and biodegradable, whereas plastic film-based wrapping products, like plastic bubble wrap, are often difficult for consumers to recycle if they are recyclable at all. Second, we believe our Wrapping solutions absorb shocks and maintain their shape better than bubble wrap, which is not well-suited for sharp or heavy products and can transmit shock to lighter weight products. Third, our Wrapping systems can be deployed in greater number of configurations, at a higher level of automation, and require less facility space for material storage than bubble wrap applications. Finally, we believe that Geami^® and Ranpak ReadyRoll provide a much more elegant unboxing experience for our end-users’ customers, particularly when compared to that of plastic bubble wrap.  

Automation

We sell a highly customized Automation solution under the brand name “Ranpak Automation.” Our Ranpak Automation product line is focused on designing, manufacturing, and selling highly automated, turn-key integrated box-sizing systems to high-volume end-users. We are in the process of expanding Ranpak Automation’s offering to grow the ongoing spare parts design and service business. The systems are designed to help minimize the use of in-the-box packaging for these end-users while fully automating their end-of-line operations. We acquired our Ranpak Automation product line through our acquisition of Neopack Solutions S.A.S. in 2017 (“e3neo”).

Our highly automated Ranpak Automation systems integrate devices that determine the optimal box height for the items to be shipped with a mechanism that automatically sizes the height of the box to fit the item. These systems are designed to give end-users the flexibility to make various box heights along a single production line. Moreover, our Automation systems consist of linked modular units that can easily be expanded with additional modules to meet an end-user’s changing needs.

In 2020, Ranpak Automation generated $8.7 million in net revenue, which accounted for 2.9% of our net revenue.

Unlike our Void-Fill, Cushioning and Wrapping systems, we currently design and sell our Automation systems outright to our customers, and derive net revenue from our Automation products by designing, manufacturing, installing and servicing Automation systems at end-user facilities. Accordingly, our current business model for our Automation product line involves the direct or indirect sale of highly customized systems, designed on the basis of our consultancy and product engineering expertise.

We believe the growing operational, through-put requirements and a tight labor market experienced by medium- and large-scale e-commerce retailers will increase the demand for highly automated end-of-line systems. Accordingly, we expect our Automation business model and product offerings, as well as those of our competitors, to evolve rapidly within the next several years as the market continues to develop and we address the growing needs of our end-users.

We believe our Automation product line is superior to its competition for a number of reasons. First, in our view, our Automation systems can typically operate at a higher speed than comparable products, resulting in a higher through-put for end-users. Second, our Automation systems typically require less floor space for installation and operation in an end-user’s facility. Third, we believe our Automation systems provide end-users with greater flexibility than our competitors’ products, in terms of the high level of customization and the ease of expansion through the addition of new modules.  Finally, we believe that we provide customers with a comprehensive and optimal end-of-line automated packaging solution, rather than just selling a product.  

Industry

Although the macroeconomic effects of COVID-19 are not yet fully known, our relevant addressable market of the broader global protective packaging industry is an estimated $8.8 billion in 2021 and growing. The global protective packaging industry is fragmented and competitive with market leaders accounting for a relatively small share of the market. This fragmentation is due primarily to the variety of product types and the myriad of applications in which they are used around the world.

Protective packaging is used to store and protect goods during shipping and handling from shock, vibration, abrasion and other damages. It is mainly used to fill the empty space between the product/merchandise and exterior carton or container (often referred to as dunnage), or to protect goods during shipment. As a general matter, the value of the goods being shipped, as well as the potential cost of breakage, far outweigh the cost of in-the-box protective packaging, which drives the demand for effective protective packaging solutions like ours. Protective packaging comes in various forms such as foam, air pillows, bubble wrap, cushion products, loose fill (e.g., Styrofoam packing peanuts), paperboard protectors and protective mailers, as well as non-engineered solutions such as newsprint, tissue paper, shredded corrugated cardboard and other materials.

9

The protective packaging industry is characterized by a diversity of applications and end markets, within both the industrial and consumer segments. Historically, growth in the protective packaging industry has been positively impacted by trends such as expedited delivery of individualized packages, globalization of the supply chain, and increased focus on efficiency and reduced shipping costs. We believe more recent and future growth drivers include further expansion of e-commerce activity, increased customization of protective packaging systems in markets such as electronics, and increased demand for environmentally friendly protective packaging. Moreover, in our view, those markets most closely linked to e-commerce and/or sustainable packaging are those best positioned for growth in the future.

Our Market

Our end-user market consists of any business that sells and ships products requiring random packaging. Accordingly, these end-users are highly dependent on their ability to obtain a cost-effective and efficient in-the-box packaging solution. Our end-users operate in a variety of businesses, including e-commerce, the automotive after-market, electronics, machinery/manufacturing, home goods, pharmaceuticals, retail and others.

We primarily sell our products to our distributors which, in turn, market and sell our products to our end-users. We also sell products directly to select end-users. In 2020, 85.5% of our net revenue was derived from sales to our distributors and approximately 14.5% of our net revenue was derived from sales directly to end-users.

Distributors.  We primarily sell our products to our network of over 250 distributors worldwide. These distributors vary in size and, generally, offer a broad suite of packaging and other warehousing products and services to the end-users they serve, including other protective packaging systems, such as plastic bubble wrap and air pillows. Substantially all of our net revenue from distributors is generated by those who have agreed to exclusivity with our products and not to sell or promote competitors’ paper-based solutions.  We believe that our distributors agree to these restrictions due to the exceptional value proposition our products provide to the end-users they serve.

Additionally, our distributors benefit from the collaborative approach we foster with our internal sales, engineering and marketing organization. We work with our distributors to win additional end-users of our paper-based products that the distributor, in turn, can service on an on-going basis with a broad suite of packaging equipment and supplies. Our distributors also typically address the needs of our end-users directly with respect to any ongoing protective system service needs. In order to facilitate the collaborative process, we meet with our distributors to discuss end-user needs and potential solutions, provide training programs (including through our Ranpak Academy program) for distributors that are designed to cultivate their knowledge of, and loyalty to, our brands, as well as provide the tools they need to successfully market and place our systems.

As a result of these and other efforts, we have built and maintained a well-established distributor network that is comprised primarily of long-term business relationships, as demonstrated by an average relationship greater than 20 years with our top ten global distributors. The continuity of these relationships evidences the strength of our business model, as well as the value proposition for our distributors and end-users. Furthermore, the depth and longevity of these relationships result in a distributor network that is highly knowledgeable and well versed in conveying the benefits of our systems to end-users.

We believe that our distributor-based distribution model is particularly well suited to the highly fragmented nature of the protective packaging solution end-user market we seek to serve by enabling us to reach a broad range of end users across size, industry and geography while maintaining a lean internal salesforce and capital base.

We charge our distributors for the paper consumables they purchase from us to provide to end-users, as well as a user fee for each protective packaging system they obtain from us for installation with an end-user. Our distributors take possession of our systems and paper consumables at our facilities and are responsible for any transit costs incurred to ship our products to their own inventory warehouses or an end-user’s location. Moreover, distributors take responsibility to ensure that the converters are, and remain, a highly valuable asset to all the players along the value chain.

End-Users.  We have greater than 33,000 end-users located across North America, Europe, Asia, Oceania, South America, and Africa. These end-users operate in wide variety of businesses and rely on our systems for a cost-effective and efficient paper-based protective packaging solution that meets their operational and shipping needs. Our universe of end-users is diverse and historically stable, with greater than 80.0% of distributor-serviced accounts generating less than $10,000 in annual net revenue in 2020. Our end-users vary in size from extremely small specialty manufacturers or retailers to some of the largest global e-commerce companies. While most of our end-users purchase our products from our distributors, we also sell our products directly to select end-users. Direct sales to end-users accounted for approximately 14.5% of our net revenue in 2020.

E-commerce.  We believe changing consumer preferences and buying habits will drive continued e-commerce growth, both among pure-play e-commerce companies, as well as among historical brick-and-mortar companies seeking to expand their e-commerce

10

presence. We further believe the critical necessity of brand owners to optimize supply chains and reduce capital spend drives the important trend in concentration of logistics through third-party logistics providers that in turn drives increasing needs for efficient packaging end-of-line solutions. The availability of a broader product selection on-line, faster delivery times, and increased in-store pickup options all drive significant growth in on-line sales. This expansion of e-commerce is a worldwide trend that we believe will continue to accelerate as on-line penetration grows in developed and emerging markets. The ongoing COVID-19 pandemic has demonstrated the growing macroeconomic emphasis on e-commerce in the global economy.  Although some of our e-commerce end-users are focused on the responsible reduction of their need for void-fill material more broadly, they generally require protective packaging solutions that can be integrated into their existing supply and distribution infrastructures on a low-cost and efficient basis. Most commonly, our e-commerce end-users purchase our Void-Fill solutions, but many also use our Automation, Wrapping and/or Cushioning systems. Sales to our e-commerce end-users, directly and through distributors accounted for approximately 34.9% of our net revenue in 2020.

Industrial Manufacturing.  Our industrial manufacturing end market includes end users manufacturing products utilized for tools, construction supplies, energy and utilities, chemicals, paints, and metals. We believe demand in these sectors will increase as growing populations and expanding middle classes in developing countries generate more disposable income. Higher demand for advanced machines spurs increased spending on tools and robotics while higher demand for housing, infrastructure and commercial buildings benefits the tools and construction supplies sectors.  Sales to industrial manufacturing end-users accounted for approximately 12.6% of our net revenue in 2020.

Automotive Aftermarket.  The automotive after-market is driven by the need for replacement parts as automobiles age, as well as by the desire of consumers to customize vehicles to enhance performance and improve aesthetics. Increasing average age of vehicles and digitalization of component delivery sales and services, along with the advent of on-line portals distributing after-market components is expected to contribute to the continued growth of the automotive after-market industry. Our automotive after-market end-users require protective packaging solutions that have strong protective qualities, as the products they ship are often heavy, require greater care in handling, and have a higher individual per-unit value. Accordingly, these end-users most commonly purchase our Cushioning solutions. Our packaging solutions are typically designed to integrate into these end-users’ existing industrial processes for the production and distribution of automotive parts. Sales to our automotive after-market end-users accounted for approximately 9.9% of our net revenue in 2020.  

Electronics.  Widespread product innovation combined with an expanding working population, a corresponding growth in household formation and disposable incomes are key factors contributing to the growth of the global consumer electronics market. Thriving demand for smartphones across the globe and the miniaturization of electronic devices are additional factors boosting growth in the global consumer electronics market. We believe this demand for electronics will continue to grow as innovation, such as the Internet-of-Things and voice-connected devices, drives increased demand for the latest electronics hardware. Our electronics end-users customarily sell products such as computer hardware and electronics that are often already securely packaged in primary packages by the manufacturer and, as a result, require less robust protective packaging systems from us. Sales to our electronics end-users accounted for approximately 7.6% of our net revenue in 2020.

Industrial Machinery.  We believe demand for industrial machinery and equipment used in sectors such as agriculture, construction, mining, packaging, and food processing will increase as economies expand, thus requiring additional infrastructure spend as well as increasing the need to feed growing middle-class populations across the globe. Sales to our machinery end-users accounted for approximately 6.1% of our net revenue in 2020.

Other.  Our end-users also operate in many other industries, including Warehousing (5.2% of net revenue in 2020), Home Furnishings (4.2%), Printing and Business Services (3.1%), and other various industries (16.4%).

Our Sales, Marketing, and Distribution

Our sales and marketing efforts are focused on developing and expanding distributor relationships, cultivating large accounts, co-selling with distributor sales representatives, educating end-users on the advantages of our product offerings and capturing customer requirements to drive our product innovation efforts. Our flexible go-to-market strategy consists of sales and marketing efforts aimed at distributors and end-users to drive demand through distribution. This sales, marketing and distribution organization allows us to reach end-users across industries and around the globe.

Our internal sales and marketing team partners with distributors to proactively target new accounts and pull sales through the distribution network. We intend to continue investing in our distributor partners and sales force to optimize their market focus, enter new vertical segments, and provide our distributor partners with training, marketing programs and technical support, including through our Ranpak Academy, a training and product education program we offer frequently to new and existing distributors. Our training programs are designed to cultivate distributor knowledge and loyalty to our brands and to provide distributors with the tools necessary to successfully place our systems with the end-users they serve.

11

Our internal sales teams, marketing operations, and customer service operations are organized geographically with sales and support operations aligned under North American, European and Asia-Pacific geographies. Each geography is managed through a structure of regional general sales managers and national account managers, as well as individual account managers who cover specific states, countries or industries within a region.

As of December 31, 2020, we employed 80 sales, marketing and customer service personnel in the United States; 94 sales, marketing and customer service personnel in Europe; and 23 sales, marketing and customer service personnel in Asia.

Our Manufacturing and Assembly Processes

We manufacture and assemble proprietary protective systems that convert kraft paper into a broad range of packaging and cushioning products to address our customers’ needs. Our objective is to leverage our scale to achieve purchasing efficiencies and reduce our total delivered cost across our regions. We do this while adhering to strategic performance metrics and stringent purchasing practices. All four of our U.S. sites and both of our European sites renewed their certification under ISO 9001:2015 standards in 2019.  The certification expires in 2021, however, is anticipated to be renewed.

We purchase the components for our protective packaging systems, as well as certain assembled systems, from a variety of well-established international design and manufacturing partners. We then assemble certain proprietary protective systems at our in-house facilities, employing highly skilled machine assembly teams. We also outsource the manufacture and assembly of a number of our proprietary protective systems to third-party manufacturing partners to be built in accordance with our design specifications, with a majority originating from China. We hold our suppliers to strict quality standards, and periodically conduct in-person audits of their facilities. With respect to our Ranpak Automation product line, the products are designed and manufactured at our in-house facilities or external contractors before installation at a customer’s facility. In 2020, we completed a facility dedicated solely to Ranpak Automation in Kerkrade, the Netherlands, located approximately three miles from our Heerlen location, to enhance our production capacity in our Automation business. We believe this state-of-the-art facility substantially increases our manufacturing and R&D capabilities, as well as provides a showroom for potential customers to see our extensive Automation product line.  As our Automation business expands globally, we believe the Kerkrade facility can serve as a blueprint for adding other potential Automation facilities, including in North America.

We believe our design and manufacturing partners provide an important complement to our in-house design and manufacturing expertise. These partnerships give us great flexibility in choosing the optimal design and manufacturing solution for any product, whether that be entirely out-sourced, entirely in-sourced, or a blend of out-sourcing and in-sourcing. Accordingly, this network allows us to make design and manufacturing decisions on the basis of numerous factors, including cost, efficiency, level of intellectual property protection and reliability.

Our Paper Suppliers

We purchase both 100% virgin and 100% recycled kraft paper, as well as blends of materials recycled from post-consumer waste, from various suppliers for conversion into the paper consumables we sell. Before we determine to purchase paper from any supplier, the supplier must undergo a qualification process to ensure that its product meets our exacting requirements. This qualification process involves an evaluation of the physical specifications of the potential supply source, as well as extensive testing for the paper’s convertibility – on the fan-folding, rewinding and die-cutting raw paper converters in our facilities – and in the protective packaging systems we place with our end-users. All of our paper is sourced from suppliers that are SFI and/or FSC certified. Once a supplier is qualified, we purchase large rolls of kraft paper from that supplier for integration into our existing supply and production chain. The paper rolls are converted at our facilities before sale to our distributors and direct end-users for use with our Void-Fill, Cushioning and Wrapping protective systems.

In 2020, we purchased paper from approximately 22 paper suppliers and our largest single source of paper supplies sold us approximately 44.9% of the paper supplies purchased in North America. While the cost of paper supplies is our largest input cost, we negotiate supply and pricing arrangements with most of our paper suppliers annually, many of which we have long-standing relationships with, which helps us mitigate shorter term fluctuations in paper cost.

Our Competition

The markets in which we operate are highly competitive and fragmented due to the large number of participants and the variety of product types and applications in which they are used around the world. Industry participants include specialized firms that focus on protective packaging, packaging companies that offer protective products among other product lines, and packaging material producers that supply packaging materials to end-users. Other competitors focus on narrow market segments (such as thermal), provide a limited range of products, or operate in a discrete geography. Finally, some competitors offer commoditized products, such as protective mailers or non-systems-based solutions that can be used for less sophisticated protective packaging needs.

12

Companies in the protective packaging industry employ a variety of strategies to gain market share and compete. We are one of the few suppliers offering a full suite of fiber-based renewable protective packaging solutions to a diversified set of end markets on a global basis. Our “in-the-box” protective packaging solutions serve to minimize movement of products in a box and provide cushioning or bracing, which minimize damage. Most frequent competing products are air pillows, bubble wrap, foam-in-place, loose-fill and other fiber-based solutions. We believe fiber-based solutions are the most versatile option used for a wide variety of products in various end markets (electronics, automotive, e-commerce) and is the preferred environmentally friendly solution. Competition for most of our packaging products is based primarily on packaging product quality (reliability and durability), breakage protection, service, price, speed/throughput, environmental sustainability, and company reputation. Since competition is also based upon innovations in packaging technology, we maintain ongoing R&D programs to enable us to maintain technological leadership. We protect our investments in improving technology through maintaining a comprehensive patenting program and aggressively pursue infringers of our patented technology, features, and processes.

We compete with companies producing competing products that are well-established, have significant scale, and have a broad product offering. There are other manufacturers of protective packaging products, some of which are companies offering similar products that operate across regions and others that operate in a single region or single country. Our primary competitors include Sealed Air Product Care Division, Pregis (FP International/Easypack), Intertape Polymer Group (IPG), Storopack and Sprick. Most competing manufacturers offer multi-substrate solutions including foam, loose-fill, plastic air pillows, and plastic bubble wrap in addition to a fiber-based offering. We believe we are the only major “in-the-box” protective packaging specialist that has a focus on a single environmentally friendly substrate (i.e., fiber) which enables us to have a best in class product offering as well as the credibility with customers that we are truly devoted to seeking environmentally sustainable solutions. We believe that we are one of the leading suppliers of fiber-based packaging materials and related systems in the principal geographic areas in which we offer those products. Additionally, due to internal technology development investments and the acquisition of the Ranpak Automation product line in 2017, we believe we are a leader in automated void reduction systems technology. Our Automation segment designs, manufactures, and sells automated box sizing equipment and provides turn-key end-of-line solutions to our customers.

Human Capital Resources

As of December 31, 2020, we had 645 employees worldwide, 264 of whom were located in the United States.  We have 153 of our employees located in Europe who are covered by collective bargaining agreements.

We are proud to count men and women of all races and ethnicities as members of our Board of Directors, management team, and employee workforce.  In 2020, we joined The Board Challenge as a Charter Pledge Partner.  The Board Challenge is an initiative to improve diverse representation in corporate U.S. boardrooms.  As a Charter Pledge Partner, we acknowledge that we already have diversity in our boardroom and pledge to use our resources to accelerate change within other companies.  We are a global organization that values life experiences, ideas, and cultures that each of our employees bring to Ranpak, striving to create an atmosphere of acceptance and respect, facilitating an encouraging environment, and helping employees attain professional and educational goals.  We strive to maintain an active dialogue with our employees and provide employees a comprehensive benefits package including competitive wages, medical, life, and accident insurance, incentive bonus programs, and a 401(k) plan with an employer matching contribution.  We have departmental budgets set aside for training and also provide a tuition reimbursement program for employees seeking bachelors or masters degrees.  Certain employees are also eligible for stock-based compensation programs that are designed to encourage long-term performance aligned with Company objectives.  

Our Intellectual Property

Our intellectual property provides a strong competitive advantage. We own or license over 645 U.S. and foreign patents and patent applications directed to various innovations related to packaging machines, stock material, packaging processes, and packaging products, as well as more than 180 U.S. and foreign trademark registrations and trademark applications that protect our branding of our packaging products, services, and equipment. We continue to innovate and advance that competitive advantage. We have filed an average of approximately 25 U.S. and foreign patent applications per year over the past 10 years. We are also vigilant in protecting our intellectual property, by monitoring competitor activity, providing notice to potential infringers, and bringing litigation whenever and wherever necessary and appropriate.

Seasonality

Ranpak estimates that approximately 34.9% of its net revenue in 2020, either directly or to distributors, was destined for end-users in the e-commerce sectors, whose businesses frequently follow traditional retail seasonal trends, including a concentration of sales in the holiday period in the fourth quarter.  Ranpak’s results tend to follow similar patterns, with the highest net revenue typically recorded in its fourth fiscal quarter and the slowest sales in its first fiscal quarter of each fiscal year.  Ranpak expects this seasonality to continue in the future, as a result of which its results of operations between fiscal quarters in a given year may not be directly comparable.

13

Governmental Regulation

Federal, State, Local, and International Regulations

We are required to comply with numerous laws and regulations covering areas such as workplace health and safety, data privacy and protection, labor and employment. We monitor changes in these laws to maintain compliance with applicable requirements.  Compliance with, or liability under, these laws and regulations may require us to incur significant costs and have a material adverse effect on our capital expenditures, earnings, and competitive position.  

Environmental Matters

We are subject to a number of federal, state, local and international environmental-related health and safety laws and regulations that govern, among other things, the manufacture and assembly of our products; the discharge or pollutants into the air, soil and water; the use, handling, transportation, storage and disposals of hazardous materials; and environmental remediation or reclamation activities. We are required to hold various permits to conduct our operations. Compliance with, or liability under, these laws, regulations and permits can require us to incur significant costs and have a material adverse effect on our capital expenditures, earnings, and competitive position.

Legal Proceedings

From time to time, we have and may again become party to intellectual property litigation or other legal proceedings that we consider to be a part of the ordinary course of our business. Historically, one category of legal proceeding to which we have been a party has involved claims of patent or other intellectual property infringement. While we are judicious in initiating litigation to those circumstances justified by legal and business considerations, we have initiated and will continue to initiate affirmative action to protect our intellectual property. This litigation includes defending counterclaims brought by the counterparty against whom we have initiated a claim of infringement as part of their infringement-defense strategy.

Corporate Information

We are publicly traded on the New York Stock Exchange (“NYSE”) under the ticker symbol “PACK.”  Our corporate headquarters is located at 7990 Auburn Road, Concord Township, Ohio 44077.  Our telephone number is (440) 354-4445.  We maintain a website at www.ranpak.com. We make available, free of charge, on this website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as soon as reasonably practicable after such reports are available, electronically filed with, or furnished to the Securities and Exchange Commission (“SEC”). These reports are also available at the SEC’s website, www.sec.gov. Apart from SEC filings, we also use our website to publish information which may be important to investors, such as analyst and investor presentations.  Any information on our website or obtained through our website is not part of this Report.  

ITEM 1A.  RISK FACTORS

Summary Risk Factors

Our business faces significant risks. In addition to the summary below, you should carefully review the “Risk Factors” section of this Report. We may be subject to additional risks and uncertainties not presently known to us or that we currently deem immaterial. Our business, financial condition and results of operations could be materially adversely affected by any of these risks, and the trading prices of our common stock could decline by virtue of these risks. These risks should be read in conjunction with the other information in this Report. Some of the more significant risks relating to our business include:

14

Risks Related to Our Business

The COVID-19 pandemic has impacted our business and could in the future materially and adversely affect our business.

The novel strain of the coronavirus identified in late 2019 and now affecting the global community has impacted and is expected to continue to impact our business and operations, and the full nature and extent of the impact is highly uncertain and may be beyond our control. Among other things, uncertainties relating to COVID-19 include the duration of the outbreak, the severity of the virus, and the actions, or perception of actions that may be taken, to contain or treat its impact, by governments and others, including declarations of states of emergency, business closures, manufacturing restrictions and a prolonged period of travel, commercial and/or other similar restrictions and limitations.

15

As many governmental measures providing for business shutdowns generally exclude critical infrastructure and the businesses that support critical infrastructure, such as packaging companies like us, all of our manufacturing facilities currently remain operational.  Nevertheless, the impact of these measures over time, as well as additional measures we have adopted or may adopt in the future that are intended to protect the health and safety of our employees, is uncertain and could limit our manufacturing productivity. Likewise, in the event large numbers of our manufacturing workforce become ill with COVID-19 or otherwise, our productivity could be adversely affected.   Any such reduction in our manufacturing productivity, whether resulting from governmental or our internal policies intended to contain the spread of the COVID-19 virus or from employee illness could hinder our ability to meet customer demand, which could have a material adverse effect on our financial condition and results of operation.

Similarly, as a result of the COVID-19 pandemic and measures taken in response to it, our suppliers and vendors may not have the materials, capacity, or capability to enable the manufacture of the parts we use to assemble our packaging machines or the paper we convert into packaging consumables. To date, we experienced delays in obtaining certain supplies used in the assembly of our packaging machines that we source from China.  While these delays have not resulted in our inability to deliver packaging machines to any of our distributors or end-users, to the extent they continue, or other of our suppliers or vendors are unable to provide us with the supplies we need according to our schedule and specifications, we may need to seek alternate suppliers or vendors, which may be more expensive, may not be available or may result in delays in shipments to us and subsequently to our distributors or end-users, each of which would affect our results of operations. Additionally, restrictions or disruptions in transportation logistics, such as reduced availability of sea or ground transport, port closures and increased border controls or closures, may result in delays and could result in higher costs, either of which could harm our profitability, make our products less competitive, or cause our distributors or end-users to seek alternative suppliers.

Additionally, social distancing and similar measures adopted in many jurisdictions around the world have impacted our ability to demonstrate and install our protective packaging systems and Automation products and, as a result, such demonstrations and installations have been delayed, which could have a material adverse effect on our business, results of operations, and financial condition.  

Furthermore, many of our end-users have been and could continue to be negatively impacted as a result of disruption in demand for their products due to the decline in global economic activity resulting from the COVID-19 pandemic.  To the extent demand for the products sold by our end-users continues to decline or the duration of any decline is longer than they anticipate, our distributors’ and end-users’ demand for our packaging systems will also decline, which could negatively impact our sales and have a material adverse effect on our business, results of operations and financial condition.

The impact of the COVID-19 pandemic continues to evolve and its duration and ultimate disruption to our operations, supply chain, distributors and end-users, and the related financial impact on us, cannot be estimated at this time. Should any such disruptions continue for an extended period of time, the impact could have a more severe adverse effect on our business, results of operations and financial condition.

We may be unable to secure a sufficient supply of paper to meet our production requirements given the limited number of suppliers that produce paper suitable for our products.

A limited number of paper mills produce paper that is suitable for use in our products in the markets in which we operate, and if they fail, experience interruptions in service, or are otherwise unable or unwilling to fill our purchase orders, we may not be able to produce enough of our paper consumables to meet our own production requirements. In addition, there are several grades or types of paper that we use in our products that we obtain from a single source due to the specificity of our requirements and limitations in the available paper products in a given market. For example, in 2020, we purchased approximately 44.9% of our raw paper requirements in North America from a single supplier, WestRock Company (“WestRock”). Increasing consolidation among our suppliers or the paper supply market more broadly may increase our reliance on existing suppliers or impact our ability to obtain alternative suppliers, if necessary.

If WestRock or one of our other major suppliers of paper in any of the markets in which we operate, fails or experiences an interruption or delay in service, there may be short-term or long-term disruption in our ability to secure paper from qualified sources and we may not have enough inventory to maintain our production schedule or continue to provide paper consumables to our distributors and end-users on a timely basis, or at all. For example, at most of our facilities, quantities of raw paper stored on-site represent approximately five days of paper consumables production at such facilities due to cost savings and storage limitations. Any such failure, interruption or delay may result in on-site paper storage at our paper consumable production facilities being depleted and, as a result, a reduction in the volume of production and sales of our paper consumables, which may have a material adverse effect on our business, results of operations and financial condition.

16

Paper pricing may negatively impact our results of operations, including our profit margins, and financial condition.

Our primary input is kraft paper, which we purchase from various paper suppliers around the world. Increases in global or regional market demand for paper-based products could increase the cost of the kraft paper we purchase. Increases in the price of kraft paper could also result from, among other things, increases in the cost of the raw materials used in paper production or increases in the cost of the energy our suppliers use to manufacture paper.

While historically, we have been able to successfully manage the impact of higher paper costs both by entering into annual fixed-price contracts with our suppliers, as well as by increasing the selling prices of our products, if we are unable to minimize the effects of any increases in paper costs through sourcing, pricing or other actions, our results of operations and financial condition may be materially adversely affected.

Our business is exposed to risks associated with our reliance on third-party suppliers to provide both the components used in our protective packaging systems as well as certain fully assembled protective packaging systems.

These risks include, but are not limited to:

For example, since the outbreak of the ongoing COVID-19 pandemic, we have experienced delays in the supply of certain components used in the assembly of certain of our protective packaging systems. Should these delays continue or should our supply of such components be interrupted, our business and results of operations may be adversely affected.

In addition, some of our third-party suppliers for components and fully assembled systems, including certain suppliers impacted by the ongoing coronavirus outbreak, represent our only source for such products. If we are unable to continue to purchase such components and systems from such suppliers, we may face additional costs or delays, or be unable to obtain similar components and systems. These and other factors may have a material adverse effect on our business, results of operation or financial condition.

Demand for our products could be adversely affected by changes in end-user or consumer preferences, which could have a material adverse effect on our business, financial condition or results of operations.

Our net revenue depends primarily on the volume of purchases by our end-users in the e-commerce industry and other industries it serves. End-user preferences for packaging formats, as well as the preferences of our end-users, can influence net revenue. Changes in these preferences, as well as changes in consumer behavior generally, could negatively impact demand for our products which could have a material adverse effect on our business, financial condition or results of operations.

Moreover, we position ourselves in the protective packaging market as the leading environmentally sustainable protective packaging solutions provider. Although we believe a market and consumer preference for environmentally sustainable solutions is a trend that is likely to continue, there is no guarantee that it will do so or that we will benefit from the continuing trend. If the current trend in favor of environmental sustainability does not continue, diminishes, or shifts away from paper and fiber-based products, demand for our products could decrease, which could have an adverse impact on our business or results of operations, including through reduced net revenue and a subsequent decrease in gross margin and earnings. Additionally, the advent of emerging or improved technologies, such as the potential widespread availability of lower cost bio-plastics or increased recyclability of resin-based packaging solutions, could

17

satisfy market and consumer demand for environmentally sustainable packaging solutions and negatively impact our business, financial condition or results of operations even if the current trend in favor of environmentally sustainable solutions continues.

Continued consolidation in sectors in which many of our end-users operate may adversely affect our business, financial condition or results of operations.

Many of the sectors in which many of our end-users operate, such as the e-commerce, automotive after-market, electronics, machinery and home goods markets, have been consolidating in recent years, and this trend may continue. Because our business relies on integrating our protective packaging systems into end-users’ existing operations and generating revenue through the sale of our paper consumables, increased consolidation may have an adverse impact on our or our distributors’ ability to attract additional end-users or retain existing end-users, or on the pricing of our products and services, which could in turn adversely affect our business, financial condition or results of operations.

The loss of end-users, particularly our e-commerce end-users, or a reduction in their production requirements, could have a significant adverse impact on our net revenue and profitability.

Although we have a diverse base of end-users, the loss of significant end-users or a large group of end-users, or a reduction in their production requirements, could have an adverse effect on our net revenue and, depending on the magnitude of the loss or reduction, our financial condition or results of operations. There can be no assurance that our existing end-user relationships will continue or be renewed at the same level of production, or at all, in the future.

In particular, a number of our e-commerce end-users that currently use our paper consumables for void-fill, cushioning or wrapping have established internal goals or initiatives relating to reducing the quantity of consumables that they utilize in their product packaging as part of environmental responsibility initiatives. If these end-users achieve their goals or if additional end-users pursue similar initiatives, they may require a reduced quantity of our paper consumables for protective packaging of their products. The loss of any e- commerce end-users, or a reduction in their purchasing levels, could have a material adverse effect on our business, financial condition or results of operations.

Our investments in R&D may not yield the results expected.

In order to compete in the protective packaging market, we must, among other things, adapt to changing consumer preferences and a competitive market through technological innovation. As a result of technological innovation as well as changing consumer preferences, new products can become standardized rapidly, leading to more intense competition and ongoing price erosion. In order to maintain our competitive advantage, we have invested, and will continue to invest, in R&D of new products and technologies. However, these investments may not yield the innovation or results expected on a timely basis, or at all, and any resulting technological innovations may not lead to successful new products or otherwise improve our performance and competitive advantage. Furthermore, our competitors may develop new products that are better suited to meet consumer demands, may develop and introduce such products before we are able to do so or may otherwise negatively impact the success of our new products, any of which could have a material adverse impact on our business, financial condition or results of operations.

The global nature of our operations exposes us to numerous risks that could materially adversely affect our financial condition or results of operations.

We maintain production facilities in three countries and territories, and our products are distributed to approximately 50 countries and territories around the world. A substantial portion of our operations are located outside of the United States and 61.0% of our 2020 revenue was generated outside of the United States. These operations, particularly in developing regions, are subject to various risks that may not be present or as significant for our U.S. and European operations. Economic uncertainty in some of the geographic regions in which we operate, including developing regions, could result in the disruption of commerce and negatively impact our cash flows or operations in those areas. Risks inherent in our international operations include:

18

These and other factors may have a material adverse effect on our international operations and, consequently, on our financial condition or results of operations.

If significant tariffs or other restrictions are placed on the import of Chinese goods, or if China places tariffs or other restrictions on the import of U.S. goods, our business, financial condition or results of operations may be materially adversely affected.

If significant tariffs or other restrictions are placed on the import of Chinese goods or if China places significant tariffs or other restrictions on the import of U.S. goods, our business, financial condition or results of operations may be materially adversely affected. For example, in September 2018, the U.S. government assessed a 10% tariff on thousands of categories of goods, including parts that we import from China to our domestic facilities to assemble our protective systems. Additionally, the U.S. government continues to signal that it may alter trade agreements and terms between China and the United States, including limiting trade with China, and may impose additional tariffs on imports from China. If additional duties are imposed or increasingly retaliatory trade measures taken by either the United States or China, we could need to materially increase our capital expenditures relating to the assembly of our protective systems, which could require us to raise our prices and result in the loss of end-users and harm our operating performance. Alternatively, we may seek alternative supply sources outside of China which may result in significant costs and disruption to our operations. In any such event, our business could be impacted by retaliatory trade measures taken by China or other countries in response to existing or future tariffs, or the imposition of additional tariffs, any of which could cause us to raise prices or make changes to our operations, and could materially harm our business, financial condition or results of operations.

A major loss of or disruption in our assembly and distribution operations could adversely affect our business, financial condition or results of operations.

A disruption in operations at one or more of our assembly and distribution facilities, or those of our suppliers, could have a material adverse effect on our business or operations. Disruptions could occur for many reasons, including fire, natural disasters, weather, unplanned maintenance or other manufacturing problems, outbreaks of infectious diseases, including the ongoing COVID-19 pandemic, strikes or other labor unrest, transportation interruption, government regulation, contractual disputes, political unrest or terrorism. For example, we operate in leased facilities in Reno, Nevada, Raleigh, North Carolina, Kansas City, Missouri, and Nyrany, Czech Republic. If we are unable to renew leases at existing facilities on favorable terms or to relocate our operations to nearby facilities in an orderly fashion upon the expiration of those leases, we could suffer interruptions in our production and significant increases in costs.

Furthermore, alternative facilities with sufficient capacity or capabilities may not be available, may cost substantially more or may take a significant time to start production, each of which could negatively affect our business and financial performance. If one of our key assembly or paper converter facilities is unable to assemble our products or convert raw paper into our paper consumables, respectively, for an extended period of time, our net revenue may be reduced by the shortfall caused by the disruption and we may not

19

be able to meet our distributors’ and end-users’ needs, which could have a material adverse effect on our business, financial condition or results of operations.

Fluctuations between foreign currencies and the U.S. dollar could materially impact our consolidated financial condition or results of operations.

Approximately 61.0% of our net revenue in 2020 was generated outside the United States. We translate net revenue and other results denominated in foreign currency into U.S. dollars for our consolidated financial statements. As a result, we are exposed to currency fluctuations both in receiving cash from our international operations and in translating our financial results back to U.S. dollars. During periods of a strengthening U.S. dollar, we reported international net revenue and net earnings could be reduced because foreign currencies may translate into fewer U.S. dollars. Foreign exchange rates can also impact the competitiveness of products produced in certain jurisdictions and exported for sale into other jurisdictions. These changes may impact the value received for the sale of our goods versus those of our competitors.

Foreign exchange rates may also impact the ability of our customers to secure sufficient funds in U.S. dollars or European currency to purchase goods for export. For example, many of our distributors are local entities in the markets in which they operate and utilize foreign currencies to operate their business. Such distributors must convert their local currency into U.S. dollars or European currency in their business with us, for which foreign exchange rate fluctuations may present additional challenges for the operation of their business. We cannot predict the effects of exchange rate fluctuations on our future operating results or business. As exchange rates vary, our results of operations and profitability may be harmed.

We could experience disruptions in operations and/or increased labor costs.

In Europe, most of our employees, including most of our employees in the Netherlands, are represented by either labor unions or workers councils and are covered by collective bargaining agreements that are generally renewable on an annual or bi-annual basis. In addition, as our business expands globally, we may be subject to new labor-related requirements that may impose additional requirements or costs on our business. As is the case with any negotiation, we may not be able to negotiate or renew acceptable collective bargaining agreements in such cases, which could result in strikes or work stoppages by affected workers. Renewal of collective bargaining agreements could also result in higher wages or benefits paid to union members. A disruption in operations or higher ongoing labor costs could materially adversely affect our business, financial condition or results of operations.

We are subject to a variety of environmental and product registration laws that expose us to potential financial liability and increased operating costs.

We are subject to a number of federal, state, local and foreign environmental, health and safety laws and regulations that govern, among other things, the manufacture and assembly of our products, the discharge of pollutants into the air, soil and water and the use, handling, transportation, storage and disposal of hazardous materials.

Many jurisdictions require us to have operating permits for our assembly and warehouse facilities and operations. Any failure to obtain, maintain or comply with the terms of these permits could result in fines or penalties, revocation or non-renewal of our permits, or orders to temporarily or permanently cease certain operations, and may have a material adverse effect on our business, financial condition or results of operations.

Some jurisdictions in which we operate have laws and regulations that govern the registration and labeling of some of our products. For example, we expect significant future environmental compliance obligations for our European operations as a result of the European Union (“EU”) Directive “Registration, Evaluation, Authorization, and Restriction of Chemicals” (EU Directive No. 2006/1907) enacted on December 18, 2006. The directive, known as REACH, imposes several requirements related to the identification and management of risks related to chemical substances manufactured or marketed in Europe. The EU also enacted in 2008 a “Classification, Labeling and Packaging” regulation, known as the CLP Regulation, which aligns the EU system of classification, labeling and packaging of chemical substances to the Globally Harmonized System. Other jurisdictions may impose similar requirements. Compliance with these requirements can be costly.

We cannot predict with reasonable certainty the future cost of environmental compliance, industrial hygiene within our facilities, product registration, or environmental remediation. Environmental laws have become more stringent and complex over time and may continue to do so. Our environmental costs and operating expenses will be subject to these evolving regulatory requirements and will depend on the scope and timing of the effectiveness of requirements in these various jurisdictions. As a result of such requirements, we may be subject to an increased regulatory burden, including significant future environmental compliance, hygiene, health and safety obligations.

20

Increased compliance costs, increasing risks and penalties associated with violations, or our inability to market some of our products in certain jurisdictions may have a material adverse effect on our business, financial condition or results of operations.

If we are not able to protect or maintain our trademarks, patents and other intellectual property, we may not be able to prevent competitors from developing similar products or from marketing their products in a manner that capitalizes on our trademarks, and this loss of a competitive advantage may have a material adverse effect on our business, financial position or results of operations.

Our ability to compete effectively with other companies depends, in part, on our ability to maintain the proprietary nature of our owned and licensed intellectual property. If we are unable to maintain the proprietary nature of our intellectual property, this loss of a competitive advantage could result in decreased net revenue or increased operating costs, either of which could have a material adverse effect on our business, financial condition or results of operations.

We own a large number of patents and pending patent applications on our products, aspects thereof, methods of use and/or methods of manufacturing. There is a risk that our patents may not provide meaningful protection and patents may never be issued for our pending patent applications. Furthermore, we have historically focused and expect to continue to focus on strategically protecting our patents, including through pursuing infringement claims, which, especially in Europe, carries the risk that a court will determine our patents are invalid or unenforceable.

Trademark and trade name protection is important to our business. Although most of our trademarks are registered in the United States and in the foreign countries/regions in which we operate, we may not be successful in asserting trademark or trade name protection. In addition, the laws of some foreign countries/regions may not protect our intellectual property rights to the same extent as the laws of the United States. The costs required to protect our trademarks and trade names may be substantial.

We cannot be certain that we will be able to assert these intellectual property rights successfully in the future or that they will not be invalidated, circumvented or challenged. Other parties may infringe on our intellectual property rights and may thereby dilute the value of our intellectual property in the marketplace. Third parties, including competitors, may assert intellectual property infringement or invalidity claims against us that could be upheld.

Intellectual property litigation, which could result in substantial cost to and diversion of effort by us, may be necessary to protect our proprietary technology or for us to defend against claimed infringement of the rights of others and to determine the scope and validity of others’ proprietary rights. We may not prevail in any such litigation, and if we are unsuccessful, we may not be able to obtain any necessary licenses on reasonable terms or at all.

Any failure by us to protect our trademarks and other intellectual property rights may have a material adverse effect on our business, financial condition or results of operations.

Our acquisition and integration of businesses could adversely affect our business, financial condition or results of operations.

From time to time, we consider acquisitions that either complement or expand our existing lines of business as part of our growth strategy. We are unable to predict the size, timing and number of acquisitions we may complete, if any, in the future. Integrating acquired businesses may create substantial costs, delays or other problems for us that could adversely affect our business, financial condition or results of operations. In addition, we may incur expenses associated with sourcing, evaluating and negotiating acquisitions (including those that are not completed), and we also may pay fees and expenses associated with financing acquisitions to investment banks and other advisors. We may also assume the liabilities of an acquired company, there can be no assurances that all potential liabilities will be identified or known to us and any such liabilities could materially adversely impact our business and financial condition.

Furthermore, we may not be able to successfully integrate any acquired businesses or realize all of the expected synergies from previously acquired businesses or related strategic initiatives. If we are unable to achieve the benefits that we expect to achieve from our strategic initiatives, we could adversely affect our business, financial condition or results of operations. Additionally, while we execute these acquisitions and related integration activities, it is possible that our attention may be diverted from our ongoing operations which may have a negative impact on our business.

We are subject to taxation in multiple jurisdictions. As a result, any adverse development in the tax laws of any of these jurisdictions or any disagreement with our tax positions could have a material adverse effect on our business, consolidated financial condition or results of operations.

We are subject to taxation in, and to the tax laws and regulations of, multiple jurisdictions as a result of the international scope of our operations and corporate and financing structure. Tax laws are dynamic and subject to change as new laws are passed and new

21

interpretations of the law are issued or applied. Many countries in the European Union, as well as a number of other countries and organizations such as the Organization for Economic Cooperation and Development, are actively considering changes to existing tax laws that, if enacted, could increase our tax obligations in countries where we do business. Additional changes in tax laws could increase our overall taxes and our business, consolidated financial condition or results of operations could be adversely affected in a material way. In addition, the tax authorities in any applicable jurisdiction, including the U.S., may disagree with the positions we have taken or intend to take regarding the tax treatment or characterization of any of our transactions. If any applicable tax authorities, including U.S. tax authorities, were to successfully challenge the tax treatment or characterization of any of our transactions, it could have a material adverse effect on our business, consolidated financial condition or results of our operations.

We may be required to take write-downs or write-offs, restructuring and impairment or other charges in connection with the business combination that could have a significant negative effect on our financial condition, results of operations and stock price, which could cause you to lose some or all of your investment.

Although we conducted due diligence on Rack Holdings before we acquired it, we cannot assure you that this diligence revealed all material issues that may be present in Rack Holdings’ business, that it would be possible to uncover all material issues through a customary amount of due diligence, or that factors outside of our and Rack Holdings’ control will not later arise. As a result, we may be forced to later write-down or write-off assets, restructure our operations, or incur impairment or other charges that could result in losses. Even if our due diligence successfully identified certain risks, unexpected risks may arise and previously known risks may materialize in a manner not consistent with our preliminary risk analysis. Even though these charges may be noncash items and may not have an immediate impact on our liquidity, the fact that we report charges of this nature could contribute to negative market perceptions about us or our securities. In addition, charges of this nature may cause us to be unable to obtain future financing on favorable terms or at all.

Our level of outstanding indebtedness could adversely affect our financial condition and ability to fulfill our obligations.

We have outstanding debt, and the outstanding indebtedness may:

Our ability to make scheduled payments of principal or interest with respect to our debt will depend on our ability to generate cash and our future financial results. If we are unable to generate sufficient cash flow from operations in the future to service our debt obligations, we might be required to refinance all or a portion of our existing debt or to obtain new or additional such facilities. However, we might not be able to refinance our existing debt or obtain any such new or additional facilities on favorable terms or at all.

We are an emerging growth company within the meaning of the Securities Act, and if we take advantage of certain exemptions from disclosure requirements available to emerging growth companies, this could make our securities less attractive to investors and may make it more difficult to compare our performance with other public companies.

We are an emerging growth company within the meaning of the Securities Act, as modified by the JOBS Act, and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a non-binding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. As a result, our shareholders may not have access to certain information they may deem important. We could remain an emerging growth company for up to five years from the date of our IPO, although circumstances could cause us to lose that status earlier, including if the market value of our Class A common stock held by non-affiliates exceeds $700 million as of any June 30^th before that time, in which case we would no longer be an emerging growth company as of the following December 31. We cannot predict whether investors will find our securities less attractive because we will

22

rely on these exemptions. If some investors find our securities less attractive as a result of our reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be, there may be a less active trading market for our securities and the trading prices of our securities may be more volatile.

Further, Section 102(b)(1) of the JOBS Act exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a Securities Act registration statement declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such an election to opt out is irrevocable. We have elected not to opt out of such extended transition period which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our financial statements with another public company which is neither an emerging growth company nor an emerging growth company which has opted out of using the extended transition period difficult or impossible because of the potential differences in accounting standards used.

Our management was unable to make a full assessment regarding internal control over financial reporting for the year ended December 31, 2019, and our disclosure controls and procedures were not effective at December 31, 2019.

The Company completed the Ranpak Business Combination on June 3, 2019. Prior to the Ranpak Business Combination, the Company was a publicly traded, blank check company and the Ranpak business was part of a private, Delaware limited partnership. As a result, the design of public company internal controls over financial reporting for the Company post-Ranpak Business Combination has required and will continue to require significant time and resources from our management and other personnel. Therefore, management was unable, without deploying an unreasonable level of resources, to conduct an assessment of the Company’s internal control over financial reporting as of December 31, 2019.

Despite the fact that our management was unable to make a full assessment regarding internal control over financial reporting, in the course of preparing our financial statements as of and for the year ended December 31, 2019, we identified certain deficiencies in internal control over financial reporting that we believed to be material weaknesses. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that a reasonable possibility exists that a material misstatement of our annual or interim financial statements would not be prevented or detected on a timely basis. Based on the determination that material weaknesses in our internal control over financial reporting existed as a result of an insufficient number of trained professionals with an appropriate level of public-company accounting knowledge, training and experience, our management concluded that our disclosure controls and procedures were ineffective. Management developed and executed a plan to remedy these material weaknesses, which were fully remediated in 2020.  There can be no guarantee that potential material weaknesses will be alleviated in the time anticipated by management. Moreover, there can be no guarantee material weaknesses, so long as they prevail, do not lead to errors in our financial statements.

In addition, for as long as we remain an emerging growth company, we will not be required to comply with the independent registered public accounting firm attestation requirement on our internal control over financial reporting. There can be no guarantee that, once such requirement applies to us, the independent registered public accounting firm attestation requirement will not result in the identification of additional deficiencies or material weaknesses with respect to Ranpak’s internal control over financial reporting. Any such deficiencies or material weaknesses could lead to errors in our financial statements and will also require us to expend time and resources in executing a remediation.

Risk Related to Ownership of Our Securities

A significant portion of our total outstanding shares may be sold into the market in the near future. This could cause the market price of our common stock to drop significantly, even if our business is doing well.

Sales of a substantial number of shares of common stock in the public market could occur at any time, either pursuant to the Registration Statement on Form S-3 filed on June 13, 2019, as amended, or otherwise. These sales, or the perception in the market that the holders of a large number of shares intend to sell shares, could reduce the market price of our common stock. As of December 31, 2020, JS Capital holds approximately 39.7% of our total outstanding shares. Pursuant to the terms of the forward purchase agreements entered into at the time of the IPO and the reallocation agreement, the founder shares may not be transferred until the earlier to occur of (i) one year after the closing or (ii) the date on which we complete a liquidation, merger, share exchange or other similar transaction that results in all of our public shareholders having the right to exchange their common stock for cash, securities or other property. Notwithstanding the foregoing, if the last sale price of our common stock equals or exceeds $12.50 per share (as adjusted for stock splits, stock dividends, reorganizations, recapitalizations and other similar transactions) for any 20 trading days within any 30-trading day period commencing at least 150 days after the closing, the common stock into which the founder shares convert will be released from these transfer restrictions. Additional sales of our common stock into the market may cause the market price of our common to

23

drop significantly.  In the first quarter of 2021, our stock exceeded $15.00 for the necessary 20-day trading period, removing all applicable restrictions on our common stock.

Certain of our stockholders, including JS Capital, own a significant portion of the outstanding voting stock of the Company.

As of December 31, 2020, JS Capital holds approximately 39.7% of our total outstanding shares. As long as JS Capital owns or controls a significant percentage of outstanding voting power, JS Capital will have the ability to strongly influence all corporate actions requiring shareholder approval, including the election and removal of directors and the size of our Board of Directors, any amendment of our organizational documents, or the approval of any merger or other significant corporate transaction, including a sale of substantially all of our assets. The interests of JS Capital may not align with the interests of our other shareholders. JS Capital is in the business of making investments in companies and may acquire and hold interests in businesses that compete directly or indirectly with us. JS Capital may also pursue acquisition opportunities that may be complementary to our business, and, as a result, those acquisition opportunities may not be available to us.

Provisions in our organizational documents may inhibit a takeover of us, which could limit the price investors might be willing to pay in the future for our Class A common stock and could entrench management.

Our organizational documents contain provisions that may discourage unsolicited takeover proposals that shareholders may consider to be in their best interests. These provisions include the ability of the Board of Directors to designate the terms of and issue new series of preference shares, which may make more difficult the removal of management and may discourage transactions that otherwise could involve payment of a premium over prevailing market prices for our securities.

Our organizational documents designate the Court of Chancery of the State of Delaware as the sole and exclusive forum for substantially all disputes between the Company and our stockholders, to the fullest extent permitted by law, which could limit the Company’s stockholders’ ability to obtain a favorable judicial forum for disputes with the Company or our directors, officers, stockholders, employees or agents.

Our organizational documents provide that, to the fullest extent permitted by law, unless the Company consents to the selection of an alternative forum, the Court of Chancery of the State of Delaware will be the sole and exclusive forum for:

This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with the Company or any of the Company’s directors, officers, or other employees, which may discourage lawsuits with respect to such claims. However, stockholders will not be deemed to have waived the Company’s compliance with the federal securities laws and the rules and regulations thereunder and this provision would not apply to suits brought to enforce a duty or liability created by the Exchange Act, which provides for the exclusive jurisdiction of the federal courts with respect to all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. Furthermore, this provision applies to Securities Act claims and Section 22 of the Securities Act creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder.

Accordingly, there is uncertainty as to whether a court would enforce such provision with respect to suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. If a court were to find the choice of forum provision contained in the Company’s proposed organizational documents to be inapplicable or unenforceable in an action, the Company may incur additional costs associated with resolving such action in other jurisdictions, which could harm the Company’s business, results of operations and financial condition.

The NYSE may delist our securities from trading on its exchange, which could limit investors’ ability to make transactions in our securities and subject us to additional trading restrictions.

Our, Class A common stock is listed on the NYSE. We cannot guarantee that our securities will remain listed on the NYSE. In order to continue listing our securities on the NYSE, we must maintain certain financial, distribution and share price levels. If the NYSE delists our securities from trading on its exchange and we are not able to list our securities on another national securities exchange, we

24

expect our securities could be quoted on an over-the-counter market. If this were to occur, we could face significant material adverse consequences, including:

The price of our securities may be volatile.

The price of our securities can vary due to general market and economic conditions and forecasts, our general business condition and the release of our financial reports. During 2020, our Class A common shares traded between $5.94 and $13.44 per share. Fluctuations in the price of our securities could contribute to the loss of all or part of your investment. In an active market for our securities, the trading price of our securities following the business combination could be volatile and subject to wide fluctuations in response to various factors, some of which are beyond our control. Any of the factors listed below could have a material adverse effect on your investment in our securities and our securities may trade at prices significantly below the price you paid for them. In such circumstances, the trading price of our securities may not recover and may experience a further decline.

Factors affecting the trading price of our securities following the business combination may include:

Broad market and industry factors may materially harm the market price of our securities irrespective of our operating performance. The stock market in general and NYSE have experienced price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of the particular companies affected. The trading prices and valuations of these stocks, and of our securities, may not be predictable. A loss of investor confidence in the market for retail stocks or the stocks of other companies which investors perceive to be similar to the Company could depress our stock price regardless of our business, prospects, financial conditions or results of operations. A decline in the market price for our securities also could adversely affect our ability to issue additional securities and our ability to obtain additional financing in the future.

25

If securities or industry analysts do not publish or cease publishing research or reports about us, our business, or our market, or if they change their recommendations regarding our common stock adversely, the price and trading volume of our common stock could decline.

The trading market for our common stock will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market, or our competitors. If any of the analysts who may cover us change their recommendation regarding our stock adversely, or provide more favorable relative recommendations about our competitors, the price of our common stock would likely decline. If any analyst who may cover us were to cease their coverage or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our stock price or trading volume to decline.

Risks Related to Our Indebtedness

Our debt financing may adversely affect our leverage and financial condition and thus negatively impact the value of our shareholders’ investment in us.

We are a borrower under senior secured credit facilities provided by Goldman Sachs Merchant Banking Division consisting of a $270.9 million dollar-denominated first lien term facility, a €138.6 million euro-denominated first lien term facility and a $45.0 million revolving facility. Our senior secured credit facilities, impose, and future financing agreements are likely to impose, operating and financial restrictions on our activities which may adversely affect our ability to finance capital expenditures, acquisitions, debt service requirements or to engage in new business activities or otherwise adversely affect our ability to execute our business strategy compared to our competitors who have less debt. In some cases, these restrictions require us to comply with or maintain certain financial tests and ratios. Subject to certain exceptions, such agreements restrict our ability to, among other things:

Further, various risks, uncertainties and events beyond our control could affect our ability to comply with these covenants. Failure to comply with any of the covenants in our existing or future financing agreements, including with respect to the senior secured credit facilities, could result in a default under those agreements and under other agreements containing cross-default provisions. Such a default would permit lenders to accelerate the maturity of the debt under these agreements and to foreclose upon any collateral securing the debt. Under these circumstances, we might not have sufficient funds or other resources to satisfy all of our obligations. In addition, the limitations imposed by our existing and future financing agreements on our ability to incur additional debt and to take other actions might significantly impair our ability to obtain other financing. We cannot assure you that we will be granted waivers or amendments to these agreements if for any reason we are unable to comply with these agreements or that we will be able to refinance our debt on terms acceptable to us, or at all.

General Risk Factors

We experience competition in the markets for our products and services

We compete with a number of companies that produce and/or sell similar or competing packaging products from a variety of materials. We have several foreign and domestic competitors that are well established in the protective packaging market, including some with substantially greater financial, technical and other resources than we have or broader geographic reach. Many of our existing competitors also invest substantial resources in ongoing R&D, and we anticipate increased competition as consumer

26

preferences and other trends increase the appeal of our product areas. To the extent that our competitors introduce new products or technologies, such developments could render our products obsolete, less competitive or uneconomical.

We compete with these companies on, among other factors, the performance characteristics of our products, service, price, and the ability to develop new packaging products and solutions. Accordingly, we may not be able to maintain a competitive advantage over our competitors with respect to these or other factors, which may adversely affect our net revenue, which could have a material adverse effect on our business, results of operations or financial condition.

Unfavorable end-user responses to price increases could have a material adverse impact on our business, results of operations and financial condition.

From time to time, and especially in periods of rising paper costs, we increase the prices of our products. Significant price increases, particularly if not taken by competitors in respect of similar products, could result in lower net revenue. For instance, interruptions in paper supply may lead us to increase the price of our paper consumables while plastic-based packaging competitors would not similarly increase the price of their products, which may result in a reduction in our market share and net revenue. Such loss of end-users or lower net revenue may materially adversely affect our business, results of operations and financial condition.

Our performance, competitive position and prospects for future growth could be negatively impacted if new products we develop do not meet sales or margin expectations, which could have a material adverse effect on our business, financial condition or results of operations.

Our performance is dependent in part on our continuing ability to develop products that appeal to end-users by providing new or enhanced value propositions and provide us with a favorable return on the products’ cost through sales of paper consumables. The development and introduction cycle of each of these new products can be lengthy and involve high levels of investment. New products may not meet sales or margin expectations due to many factors, including our inability to (i) accurately predict demand, end-user preferences and evolving industry standards; (ii) resolve technical and technological challenges in a timely and cost-effective manner; or (iii) achieve manufacturing efficiencies. To the extent any new products do not meet our sales or margin expectations, our competitive position and future growth prospects may be negatively impacted, which could have a materially adverse effect on our business, financial condition or results of operations.

Our efforts to expand beyond our core product offerings and into adjacent markets may not succeed and could adversely impact our business, financial condition or results of operations.

We may seek to expand beyond our core fiber-based protective packaging systems and develop products or business strategies that have wider applications for manufacturers, end-users, or consumers. Expanding into new markets would require us to devote substantial additional resources to such expansion, and our ability to succeed in developing such products to address such markets is not certain. It is likely that we would need to take additional steps, such as hiring additional personnel, partnering with new third parties and incurring considerable R&D expenses, in order to pursue such an expansion successfully.

Any such expansion would be subject to additional uncertainties. For example, we could encounter difficulties in attracting new end-users due to lower levels of familiarity with our brand among potential distributor partners and end-users in markets we do not currently serve. As a result, we may not be successful in future efforts to expand into or achieve profitability from new markets, new business models or strategies or new product types, and our ability to generate net revenue from our current products and continue our existing business may be negatively affected. If any such expansion does not enhance our ability to maintain or grow net revenue or recover any associated development costs, our business, financial condition or results of operations could be adversely affected.

Uncertain global economic conditions have had and could continue to have an adverse effect on our financial condition or results of operations.

Uncertain global economic conditions have had and may continue to have an adverse impact on our business in the form of lower net revenue due to weakened demand, unfavorable changes in product price/mix, or lower profit margins. For example, global economic downturns have adversely impacted some of our end-users, such as automotive companies, distributors, electronic manufacturers, machinery manufacturers, home goods manufacturers and e-commerce and mail order fulfillment firms, and other end-users that are particularly sensitive to business and consumer spending.

During economic downturns or recessions, there can be heightened competition for net revenue and increased pressure to reduce selling prices as end-users may reduce their volume of purchases. Also, reduced availability of credit may adversely affect the ability of some of our end-users and suppliers to obtain funds for operations and capital expenditures. This could negatively impact our ability to obtain necessary supplies as well as the sales of materials and equipment to affected end-users. This could also result in reduced or delayed collections of outstanding accounts receivable from distributors or end-users. If we lose significant sales volume,

27

are required to reduce our selling prices significantly or are unable to collect amounts due, there could be a negative impact on our profitability and cash flows, which could have a material adverse effect on our business, financial condition or results of operations.

Cyber risk and the failure to maintain the integrity of our operational or security systems or infrastructure, or those of third parties with which we do business, could have a material adverse effect on our business, financial condition or results of operations.

We are subject to an increasing number of information technology vulnerabilities, threats and targeted computer crimes which pose a risk to the security of our systems and networks and the confidentiality, availability, and integrity of our data.

Disruptions or failures in the physical infrastructure or operating systems that support our businesses and end-users, or cyber-attacks or security breaches of our networks or systems, could result in the loss of end-users and business opportunities, legal liability, regulatory fines, penalties or intervention, reputational damage, reimbursement or other compensatory costs, and additional compliance costs, any of which could materially adversely affect our business, financial condition or results of operations. While we attempt to mitigate these risks, our systems, networks, products, solutions and services remain potentially vulnerable to advanced and persistent threats.

We also maintain and have access to sensitive, confidential or personal data or information in certain of our businesses that are subject to privacy and security laws, regulations and end-user controls. Despite our efforts to protect such sensitive, confidential or personal data or information, our facilities and systems and those of our end- users and third-party service providers may be vulnerable to security breaches, theft, misplaced or lost data, programming and/or human errors that could lead to the compromising of sensitive, confidential or personal data or information, improper use of our systems, software solutions or networks, unauthorized access, use, disclosure, modification or destruction of information, defective products, production downtimes and operational disruptions, which in turn could adversely affect our business, financial condition or results of operations.

We are subject to anti-corruption and anti-money laundering laws with respect to both our domestic and international operations, and non-compliance with such laws can subject us to criminal and civil liability and harm our business.

We are subject to the Foreign Corrupt Practices Act, the U.S. domestic bribery statute contained in 18 U.S.C. § 201, the U.S. Travel Act, the USA PATRIOT Act, and possibly other anti-bribery and anti-money laundering laws in countries in which we conduct activities. Anti-corruption laws are interpreted broadly and prohibit us from authorizing, offering, or directly or indirectly providing improper payments or benefits to recipients in the public or private sector. We can be held liable for the corrupt or other illegal activities of these third parties, our employees, representatives, contractors and agents, even if we do not explicitly authorize such activities. In addition, although we have implemented policies and procedures to ensure compliance with anticorruption and related laws, there can be no assurance that all of our employees, representatives, contractors, partners, or agents will comply with these laws at all times. Noncompliance with these laws could subject us to whistleblower complaints, investigations, sanctions, settlements, prosecution, other enforcement actions, disgorgement of profits, significant fines, damages, other civil and criminal penalties or injunctions, suspension and debarment from contracting with certain governments or other persons, the loss of export privileges, reputational harm, adverse media coverage, and other collateral consequences. If any subpoenas or investigations are launched, or governmental or other sanctions are imposed, or if we do not prevail in any possible civil or criminal litigation, our business, results of operations and financial condition could be materially harmed. In addition, responding to any action will likely result in a materially significant diversion of management’s attention and resources and significant defense costs and other professional fees. Enforcement actions and sanctions could further harm our business, results of operations and financial condition.

Product liability claims or regulatory actions could adversely affect our financial results or harm our reputation or the value of our brands.

Claims for losses or injuries purportedly caused by some of our products arise in the ordinary course of business. In addition to the risk of substantial monetary judgments, product liability claims or regulatory actions could result in negative publicity that could harm our reputation in the marketplace or adversely impact the value of our brands or ability to sell our products in certain jurisdictions. We could also be required to recall possibly defective products, or voluntarily do so, which could result in adverse publicity and significant expenses and reduced net revenue. Although we maintain product liability insurance coverage, potential product liabilities claims could be excluded or exceed coverage limits under the terms of our insurance policies or could result in increased costs for such coverage.

Political and economic instability and risk of government actions affecting our business and our end-users or suppliers may adversely impact our business, results of operations and cash flows.

We are exposed to risks inherent in doing business in each of the countries/regions or regions in which we or our end-users or suppliers operate including: civil unrest, acts of terrorism, sabotage, epidemics, force majeure, war or other armed conflict and related government actions, including sanctions/embargoes, the deprivation of contract rights, the inability to obtain or retain licenses required by us to operate our plants or import or export our goods or raw materials, the expropriation or nationalization of our assets,

28

and restrictions on travel, payments or the movement of funds. In particular, if additional restrictions on trade with Russia were adopted by the European Union or the United States, and were applicable to our products, we could lose revenue and experience lower growth rates in the future, which could have a material adverse effect on our business, financial condition or results of operations.

We rely on third-party distributors to store, sell, market, service and distribute our products.

We rely on our network of third-party distributors to store, sell (in the case of paper consumables), market, service and distribute our protective packaging systems and paper consumables to a majority of our end-users. Because we rely on third-party distributors, we are subject to a number of risks, including:

If we fail to maintain our relationships with our distributors, or if our distributors do not meet the sales, marketing and service expectations of our end-users, our business, financial condition or results of operations could be materially adversely affected.

We depend on third parties for transportation services.

We rely primarily on third parties for delivery of our raw materials, as well as for transportation to certain select end-users to which we directly sell our products. In particular, a significant portion of the raw materials we use are transported by ship, railroad or trucks, which modes of transportation are highly regulated. If any of our third-party transportation providers were to fail to deliver raw materials to us in a timely manner, or fail to deliver our products to our direct end-users in a timely manner, we might be unable to manufacture our products in response to end-user demand. For example, at most of our facilities, quantities of raw paper stored on-site represent approximately five days of paper consumables production at such facilities due to cost savings and storage limitations. In addition, if any of these third parties were to cease operations or cease doing business with us, it might be unable to replace them at reasonable cost. Any failure of a third-party transportation provider to deliver raw materials or finished products in a timely manner could harm our reputation, negatively impact our end-user relationships and have a material adverse effect on our financial condition or results of operations.

Changes in laws or regulations, or a failure to comply with any laws and regulations, may adversely affect our business, investments and results of operations.

We are subject to laws, regulations and rules enacted by national, regional and local governments and the NYSE. In particular, we are required to comply with certain SEC, NYSE and other legal or regulatory requirements. Compliance with, and monitoring of, applicable laws, regulations and rules may be difficult, time consuming and costly. Those laws, regulations and rules and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments and results of operations. In addition, a failure to comply with applicable laws, regulations and rules, as interpreted and applied, could have a material adverse effect on our business and results of operations.

We are subject to litigation in the ordinary course of business, and uninsured judgments or a rise in insurance premiums may adversely impact our results of operations and financial condition.

In the ordinary course of business, we are subject to a variety of legal proceedings and legal compliance risks in our areas of operation around the world, including product liability claims, actions brought against us by our employees and other legal proceedings. Any such claims, regardless of merit, could be time-consuming and expensive to defend and could divert management’s attention and resources.

In accordance with customary practice, we maintain insurance against some, but not all, of these potential claims. We may elect not to obtain insurance if we believe that the cost of available insurance is excessive relative to the risks presented. The levels of insurance we maintain may not be adequate to fully cover any and all losses or liabilities. Further, we may not be able to maintain insurance at commercially acceptable premium levels or at all.

29

If any significant accident, judgment, claim (or a series of claims) or other event is not fully insured or indemnified against, the cost of such accident, judgment, claim(s) or other event could have a material adverse impact on our business, financial condition or results of operations. There can be no assurance as to the actual amount of these liabilities or the timing thereof. We cannot be certain that the outcome of current or future litigation will not have a material adverse impact on our business, results of operations and financial condition.

Our insurance policies may not cover all operating risks and a casualty loss beyond the limits of our coverage could adversely impact our business.

Our business is subject to operating hazards and risks relating to handling, storing, transporting and use of the products we sell. We maintain insurance policies in amounts and with coverage and deductibles that we believe are reasonable and prudent. Nevertheless, our insurance coverage may not be adequate to protect us from all liabilities and expenses that may arise from claims for personal injury or death or property damage arising in the ordinary course of business, and our current levels of insurance may not be maintained or available in the future at economical prices. If a significant liability claim is brought against us that is not adequately covered by insurance, we may have to pay the claim with our own funds, which could have a material adverse effect on our business, financial condition or results of operations.

Our annual effective income tax rate can change materially as a result of changes in our mix of U.S. and foreign earnings and other factors, including changes in tax laws and changes made by regulatory authorities.

Our overall effective income tax rate is equal to our total tax expense as a percentage of total earnings before tax. However, income tax expense and benefits are not recognized on a global basis but rather on a jurisdictional or legal entity basis. Losses in one jurisdiction may not be used to offset profits in other jurisdictions and may cause an increase in our tax rate. Changes in the mix of earnings (or losses) between jurisdictions and assumptions used in the calculation of income taxes, among other factors, could have a significant effect on our overall effective income tax rate, which may have a material adverse effect on our financial condition or results of operations.

The full realization of our deferred tax assets may be affected by a number of factors, including earnings in the United States.

We have deferred tax assets including state and foreign net operating loss carryforwards, accruals not yet deductible for tax purposes, employee benefit items, interest expense carryforwards, and other items. We have established valuation allowances to reduce the deferred tax assets to an amount that is more likely than not to be realized. Our ability to utilize the deferred tax assets depends in part upon our ability to generate future taxable income, including the scheduled reversal of deferred tax liabilities that have been generated as a result of the transaction, within each respective jurisdiction during the periods in which these temporary differences reverse or our ability to carryback any losses created by the deduction of these temporary differences. We expect to realize the assets over an extended period. If we are unable to generate sufficient future taxable income in the U.S. and/or certain foreign jurisdictions, or if there is a significant change in the time period within which the underlying temporary differences become taxable or deductible, we could be required to increase our valuation allowances against our deferred tax assets. Our effective tax rate would increase if we were required to increase our valuation allowances against our deferred tax assets. In addition, changes in statutory tax rates or other legislation or regulation may change our deferred tax assets or liability balances, with either favorable or unfavorable impacts on our effective tax rate.

Unanticipated changes in effective tax rates or adverse outcomes resulting from examination of our income or other tax returns could adversely affect our financial condition and results of operations.

We are subject to income and other taxes in the United States, and our domestic tax liabilities are subject to the allocation of expenses in differing jurisdictions. Our future effective tax rates could be subject to volatility or adversely affected by a number of factors, including:

In addition, we may be subject to audits of our income, sales and other taxes by U.S. federal and state authorities. Outcomes from these audits could have an adverse effect on our financial condition and results of operations.

30

We may record a significant amount of goodwill and other identifiable intangible assets and we may never realize the full carrying value of the related assets.

We record a significant amount of goodwill and other identifiable intangible assets, including end-user relationships, trademarks and developed technologies. We test goodwill and intangible assets with indefinite useful lives for possible impairment annually during the fourth quarter of each fiscal year or more frequently if events or changes in circumstances indicate that the asset might be impaired. Amortizable intangible assets are periodically reviewed for possible impairment whenever there is evidence that events or changes in circumstances indicate that the carrying value may not be recoverable. Impairment may result from, among other things, (i) a decrease in our expected net earnings; (ii) adverse equity market conditions; (iii) a decline in current market multiples; (iv) a decline in our common stock price; (v) a significant adverse change in legal factors or business climates; (vi) heightened competition; (vii) strategic decisions made in response to economic or competitive conditions; or (viii) a more- likely-than-not expectation that a reporting unit or a significant portion of a reporting unit will be sold or disposed of. In the event that we determine that events or circumstances exist that indicate that the carrying value of goodwill or identifiable intangible assets may no longer be recoverable, we might have to recognize a non-cash impairment of goodwill or other identifiable intangible assets, which could have a material adverse effect on our consolidated financial condition or results of operations.

We are dependent upon certain key personnel.

Our ability to successfully operate our business is dependent upon the efforts of certain key personnel, including our senior management. The unexpected loss of the services of one or more of our directors or executive officers and our inability to hire and retain replacements could have a detrimental effect on us and negatively impact our operations and profitability.

Disruption and volatility of the financial and credit markets could affect our external liquidity sources.

Our principal sources of liquidity are accumulated cash and cash equivalents, short-term investments, cash flow from operations and amounts available under our lines of credit, including secured credit facilities, term loans and a revolving credit facility. We may be unable to refinance any of our indebtedness on commercially reasonable terms or at all.

Additionally, conditions in financial markets could affect financial institutions with which we have relationships and could result in adverse effects on our ability to utilize fully our committed borrowing facilities.

We may be unable to obtain additional financing to fund our operations or growth.

We may require additional financing to fund our operations or growth. The failure to secure additional financing could have a material adverse effect on the continued development or growth of the Company.

ITEM 1B.  UNRESOLVED STAFF COMMENTS

None.

ITEM 2.  PROPERTIES

Our global headquarters are in Concord Township, Ohio. Our wholly owned subsidiary, Ranpak B.V., maintains our European headquarters in Heerlen, The Netherlands.  

We have facilities for the assembly of our systems in Concord Township, Ohio; Heerlen, The Netherlands; and Nyrany, Czech Republic. We convert our paper consumables in Concord Township, Ohio; Kansas City, Missouri; Raleigh, North Carolina; Reno, Nevada; Heerlen, The Netherlands; and Nyrany, Czech Republic. We have a dedicated Ranpak Automation facility in Kerkrade, the Netherlands.

We also maintain sales offices in Shanghai, China; Laoshan, China; Paris, France; Tokyo, Japan; and Singapore.

The geographic dispersion of our manufacturing facilities gives us the flexibility to make our products available to our distributors and direct end-use customers at a location that is closer to their own facilities.

ITEM 3.  LEGAL PROCEEDINGS

From time to time, we may be involved in various legal proceedings, lawsuits, and claims incidental to the conduct of our business.  Our businesses are also subject to extensive regulation, which may result in regulatory proceedings against us.

31

ITEM 4.  MINE SAFETY DISCLOSURES

Not applicable.  

PART II

ITEM 5.  MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our Class A Common Shares are listed on the NYSE under the symbol, “PACK.”

Holders of Record

As of March 2, 2021, there were 23 holders of record of our Class A Common Shares and two holders of our Class C Common Shares. The actual number of holders is greater than the number of record holders and includes holders who are beneficial owners but whose shares are held in street name by brokers and other nominees. This number of holders of record also does not include holders whose shares may be held in trust by other entities.

Dividends

We have not paid any cash dividends on our common shares to date and do not intend to pay cash dividends in the foreseeable future. The payment of cash dividends in the future will be dependent upon our revenues and earnings, capital requirements and general financial condition. In addition, our Board of Directors is not currently contemplating and does not anticipate declaring stock dividends in the foreseeable future. Our ability to declare dividends is limited by restrictive covenants contained within our Facilities.  Refer to Note 11 to our consolidated financial statements for further information.

Performance Graph

The following stock price performance graph should not be deemed incorporated by reference by any general statement incorporating by reference this Report into any filing under the Exchange Act or the Securities Act, except to the extent that we specifically incorporate this information by reference, and shall not otherwise be deemed filed under such acts.

The graph below compares the cumulative total return of our common stock from June 3, 2019 through December 31, 2020, with the comparable cumulative return of two indices, the Russell 2000 Index (“RTY”) and the Dow Jones U.S. Containers and Packaging Index (“DJUSCP”).

The graph plots the growth in value of a $100.00 initial investment in our common and in each of the indexes over the indicated time periods, and assumes reinvestment of all dividends, if any, paid on the securities. We have not paid any cash dividends and, therefore, the cumulative total return calculation for us is based solely upon share price appreciation and not upon reinvestment of cash dividends. The share price performance shown on the graph is not necessarily indicative of future price performance.

32

ITEM 6.  SELECTED FINANCIAL DATA

On June 3, 2019, we consummated the acquisition of all outstanding and issued equity interests of Rack Holdings, Inc. (“Rack Holdings”) pursuant to a stock purchase agreement (the “Ranpak Business Combination”). The Company (then One Madison Corporation) was deemed to be the accounting acquirer in the Ranpak Business Combination, as a result of which the Company allocated its purchase price to Rack Holdings’ assets and liabilities at fair value, which created a new basis of accounting. Until the consummation of the Ranpak Business Combination, Rack Holdings operated as a separate business holding all of the historical assets and liabilities related to our business. Except as otherwise provided herein, our financial statement presentation includes (i) the results of Rack Holdings and its subsidiaries in Predecessor periods, and (ii) the consolidated results of Rack Holdings and its subsidiaries and One Madison Corporation for Successor periods.

Pursuant to the November 2020 Amendments, we elect to provide disclosure consistent with the recent amendments to Regulation S-K, Item 301, which eliminate the requirement to provide selected financial data in comparative tabular form for each of our last five fiscal years.

ITEM 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The information in this Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read together with our consolidated financial statements and related notes set forth in Part II, Item 8, as well as the discussion included in Part I, Item 1A, “Risk Factors,” of this Report. All amounts and percentages are approximate due to rounding.

Cautionary Notice Regarding Forward-Looking Statements

All statements other than statements of historical fact included in this Report, including, without limitation, statements under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” regarding our financial position, business strategy and the plans and objectives of management for future operations, are forward-looking statements. When used in this Report, words such as “may,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “continue,” or the negative of such terms or other similar expressions, as they relate to us or our management, identify forward-looking statements.  Factors that might cause or contribute to such a discrepancy include, but are not limited to, those described in our other SEC filings. Such forward-looking statements are based on the beliefs of management, as well as assumptions made by, and information currently available to, our management. No assurance can be given that results in any forward-looking statement will be achieved and actual results could be affected by one or more factors, which could cause them to differ materially. The cautionary statements made in this Report should be read as being applicable to all forward-looking statements whenever they appear in this Report.  For these statements, we claim the protection of the safe harbor for forward-looking statements contained in the Private Securities Litigation Reform Act.  Actual results could differ materially from those contemplated by the forward-looking statements as a result of certain factors detailed in our filings with the SEC. All subsequent written or oral forward-looking statements attributable to us or persons acting on our behalf are qualified in their entirety by this paragraph.

The forward-looking statements contained in this Report and the Exhibits attached hereto are based on our current expectations and beliefs concerning future developments and their potential effects on us taking into account information currently available to us. There can be no assurance that future developments affecting us will be those that we have anticipated. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements. Should one or more of these risks or uncertainties materialize, they could cause our actual results to differ materially from the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those identified in the section titled, “Risk Factors” included elsewhere in this Report. Except as required by law, we are not undertaking any obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise. You should not take any statement regarding past trends or activities as a representation that the trends or activities will continue in the future. Accordingly, you should not put undue reliance on these statements.  

Overview

Ranpak is a leading provider of environmentally sustainable, systems-based, product protection solutions and end-of-line automation solutions for e-commerce and industrial supply chains.  Since our inception in 1972, we have delivered high quality protective packaging solutions, while maintaining our commitment to environmental sustainability.  We assemble our protective packaging systems and provide the systems and paper consumables to customers, which include direct end-users and our network of exclusive paper packaging solution distributors, who in turn place the systems with and sell paper to commercial and industrial users for the conversion of paper into packaging materials.  We operate manufacturing facilities in Concord Township, Ohio; Kansas City, Missouri; Raleigh, North Carolina; and Reno, Nevada in the United States, in Heerlen and Kerkrade, the Netherlands as well as

33

Nyrany, Czech Republic.  In the second quarter of 2020, we opened a new production facility for our automation business in Kerkrade, the Netherlands, located approximately three miles from our Heerlen location, to enhance our production capacity in our automation business.  We also maintain sales and administrative offices in Paris, France; Laoshan, China; Shanghai, China; Tokyo, Japan; and Singapore.  We are a global business that generated approximately 61.0% of our 2020 net revenue outside of the United States.

As of December 31, 2020, we had an installed base of approximately 117.4 thousand protective packaging systems serving a diverse set of distributors and end-users.  We generated net revenue of $298.2 million in 2020.  Additionally, we generated net revenue of $163.1 million in the Successor Period and $106.4 million in the 1H 2019 Predecessor Period.

The Ranpak Business Combination

On June 3, 2019, we consummated the acquisition of all outstanding and issued equity interests of Rack Holdings, Inc. (“Rack Holdings”) pursuant to a stock purchase agreement for consideration of $794.9 million, which reflects a post-closing adjustment of $0.7 million for net working capital and additional consideration, and €140.0 million ($160.8 million) in cash, (i) $341.5 million and €140.0 million of which, respectively, was used by the Seller to repay outstanding indebtedness and unpaid transaction expenses as contemplated by the stock purchase agreement and (ii) the remainder of which was paid to Rack Holdings L.P. (“Seller”).

The Company (then One Madison Corporation) was deemed to be the accounting acquirer in the Ranpak Business Combination, as a result of which the Company allocated its purchase price to Rack Holdings’ assets and liabilities at fair value, which created a new basis of accounting.  Until the consummation of the Ranpak Business Combination, Rack Holdings operated as a separate business holding all of the historical assets and liabilities related to our business.

The Ranpak Business Combination was financed, in part, with debt of approximately $534.6 million, which became Ranpak’s direct obligation upon the consummation of the Ranpak Business Combination.  Upon the consummation of the Ranpak Business Combination on June 3, 2019, Rack Holdings’ then-existing debt, which amounted to approximately $487.6 million as of such date, was repaid in full.  In December 2019, the Company closed a public offering of its Class A common stock generating net proceeds of approximately $107.7 million that was used to pay down the First Lien Dollar Term Facility.

Following the Ranpak Business Combination, we have hired, and expect to hire additional staff and implement procedures and processes to address regulatory and other customary requirements applicable to operating public companies. We have incurred additional annual expenses for, among other things, directors’ and officers’ liability insurance, director fees, and additional internal and external accounting, legal and administrative resources, including increased audit and legal fees.  We estimated that these incremental costs on an annual basis would amount to approximately $2.0 million or more per year, resulting in higher operating expenses in future periods.  The closing of the Ranpak Business Combination also resulted in the elimination of certain non-recurring expenses incurred prior to the Ranpak Business Combination, which amounted to $35.4 million for the year ended December 31, 2019.

Factors Affecting the Comparability of Our Results of Operations

The following factors may have affected the comparability of Ranpak’s results of operations between the periods presented in this Report and may affect the comparability of its results of operations in future periods.

Effect of Currency Fluctuations.  As a result of the geographic diversity of Ranpak’s operations, it is exposed to the effects of currency translation. Currency transaction exposure results when Ranpak generates net revenue in one currency at one time and incurs expenses in another currency at another time, or when it realizes gain or loss on intercompany transfers. While Ranpak seeks to limit its currency transaction exposure by matching the currencies in which it incurs sales and expenses, it may not always be able to do so.

In addition, Ranpak is subject to currency translation exposure because the operations of its subsidiaries are measured in their functional currency which is the currency of the primary economic environment in which the subsidiary operates. Any currency balances that are denominated in currencies other than the functional currency of the subsidiary are re-measured into the functional currency, with the resulting gain or loss recorded in the foreign currency (gains) losses line-item in Ranpak’s income statement.  In turn, subsidiary income statement balances that are denominated in currencies other than the U.S. dollar are translated into U.S. dollars, Ranpak’s functional currency, in consolidation using the average exchange rate in effect during each fiscal month during the period, with any related gain or loss recorded as foreign currency translation adjustments in other comprehensive income (loss). The assets and liabilities of subsidiaries that use functional currencies other than the U.S. dollar are translated into U.S. dollars in consolidation using period end exchange rates, with the effects of foreign currency translation adjustments included in accumulated other comprehensive income (loss).

34

Ranpak does not currently hedge its foreign currency transaction or translation exposure. As a result, significant currency fluctuations could impact the comparability of its results between periods, while such fluctuations coupled with material mismatches in net revenue and expenses could also adversely impact its cash flows. See “Qualitative and Quantitative Disclosures About Market Risk.”

Acquisitions.  On February 28, 2017, Ranpak acquired e3neo for total consideration of $3.3 million, including contingent consideration of $1.1 million which was paid in full in 2018, plus an earn-out opportunity, which was not earned and, in April 2020, we entered into a settlement arrangement with the former majority owner of e3neo to provide, among other things, for a payment to the earn-out counterparties in the amount of approximately $1.6 million.  All amounts were paid by the end of October 2020.  See Note 10, “Acquisition” to our consolidated financial statements included elsewhere in this Report.  

In October 2020, we acquired certain amortizable intangible assets, including patents and other intellectual property, from a European manufacturer in a €1.1 million (or $1.3 million) asset acquisition transaction.  Please refer to Note 9, “Goodwill, Long-Lived, and Intangible Assets, net” to our consolidated financial statements included elsewhere in this Report for further detail.  

While recent acquisitions have been relatively small, any significant future business acquisitions may impact the comparability of Ranpak’s results in future periods with those for prior periods.

Impact of the COVID-19 Pandemic.  The COVID-19 pandemic has resulted in rapid changes in market and economic conditions around the world as COVID-19 continues to spread.  We derive a significant portion of our revenue from sales of Void-Fill, Cushioning and Wrapping solutions to e-commerce end-users and demand from these end-users has been strong, offsetting reductions in demand for these products from customers in other industries.  However, social distancing and similar measures adopted in many jurisdictions around the world have impacted our ability to demonstrate and install our protective packaging systems and Automation products and, as a result, such demonstrations and installations have been delayed.  If social distancing measures continue for an extended period of time, growth in our protective packaging system base, acquisition of new customers and sales of Automation products may be adversely affected.  We believe that these impacts are not unique to us and that our industry competitors have been impacted in a similar fashion.  We are deemed an essential business under the Memorandum on Identification of Essential Critical Infrastructure Workers During COVID-19 Response issued by the United States Cybersecurity and Infrastructure Security Agency and pursuant to state decisions in states where our domestic production and distribution facilities are located.  We continue to operate our production and distribution facilities, both domestically and internationally, albeit subject to social distancing and other measures to promote a safe operating environment.  While we have experienced limited delays in receiving certain supplies we use to assemble our packaging systems, to date, these measures have not materially impacted the cost of producing and distributing our products, the cost and availability of raw materials and components, and we have encountered minimal disruption in our ability to fulfill customer orders.  We continue to monitor our liquidity position closely and have extended payment terms to certain of our customers when necessary, while correspondingly seeking extended terms from our key suppliers.  While we do not currently expect COVID-19 to have a material impact on our business, results of operations, financial condition or liquidity, at the time of this filing, we cannot predict the extent to which we will ultimately be impacted due to the evolving and highly uncertain nature and duration of the COVID-19 pandemic.  See “Risk Factors” located previously in this Report.  We will continue to evaluate the nature and extent of the impact to our business, results of operations, financial condition, and cash flows.

Key Performance Indicators and Other Factors Affecting Performance

Ranpak uses the following key performance indicators and monitors the following other factors to analyze its business performance, determine financial forecasts, and help develop long-term strategic plans:

Protective Packaging Systems Base — Ranpak closely tracks the number of protective packaging systems installed with end-users as it is a leading indicator of underlying business trends and near-term and ongoing net revenue expectations. Ranpak’s installed base of protective packaging systems also drives its capital expenditure budgets.  The following table presents Ranpak’s installed base of protective packaging systems by product line as of December 31, 2020 and 2019:

Paper Costs.  Paper is a key component of Ranpak’s cost of sales and paper costs can fluctuate significantly between periods. Ranpak purchases both 100% virgin and 100% recycled paper, as well as blends, from various suppliers for conversion into the paper consumables it sells. The cost of paper supplies is Ranpak’s largest input cost, and it negotiates supply and pricing arrangements with

35

most of its paper suppliers annually, with a view towards mitigating fluctuations in paper cost. Nevertheless, as paper is a commodity, its price on the open market, and in turn the prices Ranpak negotiates with suppliers at a given point in time, can fluctuate significantly, and is affected by several factors outside of Ranpak’s control, including supply and demand and the cost of other commodities that are used in the manufacture of paper, including wood, energy and chemicals. The market for Ranpak’s solutions is competitive and it may be difficult for Ranpak to pass on increases in paper prices to its customers immediately, or at all, which has in the past and could in the future adversely affect its operating results.

Basis of Presentation

Net Revenue.  Revenue from contracts with customers is recognized using a five-step model consisting of the following: (1) identify the contract with a customer; (2) identify the performance obligations in the contract; (3) determine the transaction price; (4) allocate the transaction price to the performance obligations in the contract; and (5) recognize revenue when (or as) we satisfy a performance obligation. Performance obligations are satisfied when we transfer control of a good or service to a customer, which can occur over time or at a point in time. The amount of revenue recognized is based on the consideration to which we expect to be entitled in exchange for those goods or services, including the expected value of variable consideration. The customer’s ability and intent to pay the transaction price is assessed in determining whether a contract exists with the customer. If collectability of substantially all of the consideration in a contract is not probable, consideration received is not recognized as revenue unless the consideration is nonrefundable and we no longer have an obligation to transfer additional goods or services to the customer or collectability becomes probable.

We sell our paper products to end-users primarily through an established distributor network and direct sales to select end-users. Our protective packaging solutions fall into four broad categories: Void-Fill, Cushioning, Wrapping, and End-of-Line Automation. The Void-Fill protective systems convert paper to fill empty spaces in secondary packages and protect objects. The Cushioning protective systems convert paper into cushioning pads. The Wrapping protective systems create pads or paper mesh to securely wrap and protect fragile items as well as to line boxes and provide separation when shipping multiple objects. The end-of-line Automation solutions include capital equipment which can size, pad, fill, flap, lid, tape and/or label the product in an integrated fashion with the speed and flow of the customer’s packaging line.

Charges for rebates and other allowances are recognized as a deduction from revenue on an accrual basis in the period in which the associated revenue is recorded. When we estimate our rebate accruals, we consider customer-specific contractual commitments including stated rebate rates and history of actual rebates paid.

We also charge many customers a quarterly/annual fee for the use of our protective packaging systems on a per-unit basis, which is generally billed in advance, recorded as deferred revenue upon billing and subsequently recorded as net revenue on a straight-line basis when earned over the period. Net revenue also includes sales of Ranpak Automation’s highly automated box sizing system to certain higher volume customers. See Note 8, “Revenue Recognition, Contracts with Customers” to our consolidated financial statements included elsewhere in this Report.

Cost of Goods Sold.  Cost of goods sold consists primarily of raw materials, mainly paper, depreciation of protective packaging systems and salaries, wages, benefits and bonuses for employees and contractors engaged in the conversion and production of paper. For Ranpak Automation cost of sales consists of equipment components and related labor to assemble the end-of-line solutions. Costs related to systems maintenance billed to customers are recorded as cost of goods sold as incurred.

Selling, General and Administrative Expenses. Selling, general and administrative (“SG&A”) expenses consist primarily of salaries, benefits, and bonuses for sales and marketing, executive, finance and accounting, human resources and administrative employees, third-party legal, accounting and other professional services, insurance (including auto, workers’ compensation and general liability), corporate travel and entertainment and facilities rent and utilities.

Transaction Costs. Transaction costs consist primarily of one-time professional fees and costs related to acquiring a business or engaging in equity transactions that are unable to be capitalized.

Depreciation and Amortization Expense.  Depreciation and amortization expense is comprised primarily of amortization of customer and distributor relationships and to a lesser extent building and leasehold improvements. Our intangible customer and distributor relationship assets are amortized on a straight-line basis over the useful life of the asset. All of these assets reflect the valuations ascribed to them through fair value accounting in conjunction with the Ranpak’s Business Combination.  Depreciation related to production equipment and our protective packaging systems is included in cost of goods sold.  

36

Other Operating Expense (Income), Net.  Other operating expense (income), net, includes losses on the return of equipment, mainly protective packaging systems, by customers, R&D expenses and litigation-related settlements. Returned systems are typically refurbished or disposed for salvage value.

Interest Expense.  Interest expense includes mainly the interest incurred and accrued on our outstanding indebtedness, as well as amortization of deferred financing costs, mainly debt origination and commitment fees.

Foreign Currency (Gain) Loss.  Foreign currency (gain) loss consists of foreign currency remeasurement, mainly consisting of conversion gains and losses on our Euro-denominated term facility, and, to a lesser extent, transaction losses and gains. See “— Factors Affecting the Comparability of Ranpak’s Results of Operations — Effect of Currency Fluctuations” above.

Income Tax Expense (Benefit).  Income tax expense (benefit) consists mainly of taxes payable to national, state and local authorities. We follow the asset and liability method of accounting for income taxes. Under this method, deferred income taxes are recognized for the tax consequences of temporary differences between the financial statement carrying amounts and the tax basis of the assets and liabilities. In assessing the ability to realize deferred tax assets, we consider whether it is more likely than not that some portion, or all, of the deferred tax assets will not be realized. We evaluate for uncertain tax positions at each reported balance sheet date.

Emerging Growth Company.  Section 102(b)(1) of the Jumpstart Our Business Startups Act of 2012 (“JOBS Act”) exempts an Emerging Growth Company (“EGC”) from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a Securities Act of 1933, as amended, registration statement declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards.  The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such election to opt out is irrevocable.  We have elected not to opt out of such extended transition period which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an EGC, can adopt the new or revised standard at the time private companies adopt the new or revised standard.  This may make comparison of our financial statements with another public company that is not an EGC or that is an EGC which has opted out of using the extended transition period, difficult or impossible because of the potential differences in accounting standards used.

Results of Operations

The following tables set forth Ranpak’s results of operations for 2020, the Successor Period, and the 1H 2019 Predecessor Period, with line items presented in millions of dollars.

The Ranpak Business Combination is accounted for under the scope of business combination guidance in ASC 805.  Accordingly, the Ranpak Business Combination is accounted for using the acquisition method which requires the Company to record the fair value of assets acquired and liabilities assumed from Rack Holdings (see Note 10, “Acquisition”).

In addition, in our discussion below, we include certain unaudited, non-GAAP pro forma data for 2020, the Successor Period, and the 1H 2019 Predecessor Period.  This data is based on our historical financial statements included elsewhere in this Report, adjusted (where applicable) to remove the effect of costs incurred to consummate the Ranpak Business Combination, other one-time costs incurred due to the Company entering into the Ranpak Business Combination and for purchase accounting adjustments related to the Ranpak Business Combination as well as to reflect a constant currency presentation between periods for the convenience of readers.  We refer to these data as pro forma data in our discussion.  However, such pro forma data have not been prepared in accordance with Article 11 of Regulation S-X.  We reconcile this data to our GAAP data for the same period under “Presentation and Reconciliation of GAAP to Non-GAAP Measures” for 2020 and 2019.

37

Comparison of 2020 to the Successor Period and 1H 2019 Predecessor Period