Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

​

Commission file number: 001-13122

(Exact name of registrant as specified in its charter)

​

350 South Grand Avenue, Suite 5100

Los Angeles, California 90071

(213) 687-7700

(Address of principal executive offices, including zip code, and Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒  No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐  No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒  No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒  No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐  No ☒

The aggregate market value of the voting stock held by non-affiliates of the registrant, based on the closing price on the New York Stock Exchange on June 30, 2020 was approximately $6,000,000,000. For purposes of this computation, it is assumed that the shares of voting stock held by directors and officers would be deemed to be stock held by affiliates. As of February 19, 2021, 63,601,902 shares of the registrant’s common stock, $0.001 par value, were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive Proxy Statement for the 2021 annual meeting of stockholders to be held on May 19, 2021 are incorporated by reference into Part III of this report. The Proxy Statement for the 2021 annual meeting will be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year to which this report relates.

​

Table of Contents

INDEX

​

​

​

i

Table of Contents

FORWARD-LOOKING STATEMENTS

​

Unless otherwise indicated or required by the context, as used in this Annual Report on Form 10-K, the terms “Company,” “Reliance,” “we,” “our,” and “us” refer to Reliance Steel & Aluminum Co. and all of its subsidiaries that are consolidated in accordance with U.S. generally accepted accounting principles. This Annual Report on Form 10-K and the information incorporated by reference contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. We may also provide oral or written forward-looking information in other materials we release to the public. Our forward-looking statements may include, but are not limited to, discussions of our industry and end markets, our business strategies and our expectations concerning future demand and metals pricing and our results of operations, margins, profitability, impairment charges, taxes, liquidity, litigation matters and capital resources. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “preliminary,” “range,” “intend” and “continue,” the negative of these terms, and similar expressions. These statements relate to future events or our future financial performance and involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to differ materially from those in the future that are implied by these forward-looking statements. These risks and other factors include those described in “Risk Factors” (Part I, Item 1A of this Form 10-K) and “Quantitative and Qualitative Disclosures about Market Risk” (Part II, Item 7A). In addition, other factors may affect the accuracy of our forward-looking information. These forward-looking statements are not guarantees of future performance and are subject to risks and uncertainties. Actual outcomes and results may differ materially from what is expressed or forecasted in our forward-looking statements as a result of various important factors, including, but not limited to, actions taken by us, including restructuring or cash-preservation initiatives, as well as developments beyond our control, including, but not limited to, the impact of the COVID-19 pandemic and changes in worldwide and U.S. economic conditions that materially impact our customers and the demand for our products and services. The extent to which the COVID-19 pandemic will continue to negatively impact our operations will depend on future developments which are highly uncertain and cannot be predicted, including the severity and duration of the outbreak, any reemergence or mutations of the virus, the actions taken to control the spread of COVID-19 or treat its impact, including the speed and effectiveness of vaccination efforts, and direct and indirect effects of the virus on worldwide and U.S. economic conditions. Further deteriorations in economic conditions, as a result of COVID-19 or otherwise, could lead to a further or prolonged decline in demand for our products and services and negatively impact our business, and may also impact financial markets and corporate credit markets which could adversely impact our access to financing, or the terms of any financing. We cannot at this time predict the extent of the impact of the COVID-19 pandemic and resulting economic impact, but it could have a material adverse effect on our business, financial position, results of operations and cash flows.

​

We do not assume any responsibility to publicly update any of our forward-looking statements regardless of whether factors change as a result of new information, future events, or for any other reason, except as may be required by law. You should review any additional disclosures we make in our press releases and other documents we file or furnish with the United States Securities and Exchange Commission (the “SEC”), including our Forms 10-Q and 8-K.

​

This Annual Report on Form 10-K includes registered trademarks, trade names and service marks of the Company and its subsidiaries.

​

​

ii

Table of Contents

PART I

​

Item 1.  Business

​

We are a leading diversified metal solutions provider and the largest metals service center company in North America (U.S. and Canada), serving our customers for more than 80 years. Through a network of approximately 300 locations in 40 U.S. states and in 13 countries outside the U.S., Reliance provides value-added metals processing services and distributes a full line of over 100,000 metal products, including alloy, aluminum, brass, copper, carbon steel, stainless steel, titanium and specialty steel products, to more than 125,000 customers in a broad range of industries. We focus on small orders with quick turnaround and increasing levels of value-added processing. We have made significant investments in our businesses in recent years, including investments in advanced, start-of-the-art value-added processing equipment to better service our customers that has led significant improvements in our gross profit margin and pretax income margin.

​

In 2020, our results included net sales of $8.81 billion, net income attributable to Reliance of $369.1 million, earnings per diluted share of $5.66. Our 2020 operating results were materially and adversely impacted by the effects of the COVID-19 pandemic. However, despite the challenging operating environment, we generated a record annual gross profit margin of 31.5% while our tons sold and average selling price per ton sold declined 10.8% and 9.6%, respectively. Our strong  cash flow from operations of $1.17 billion declined 9.9% from our record cash flow from operations in 2019 of $1.30 billion. We believe the strength and resiliency of our business model is demonstrated by our ability to generate strong gross profit margins and cash flow during periods of both increasing and declining metals pricing and economic strength and weakness.

​

We have made significant investments in our business through nearly $1 billion of capital expenditures over the past five years. In 2020, we performed value-added processing on 49% of the orders we shipped, significantly higher than our historical rate of approximately 40%. These significant investments have expanded our value added processing capabilities that our managers in the field have successfully leveraged to increase the percentage of our orders with value added processing, which has significantly contributed to our record gross profit margin of 31.5% that is 640 basis points higher than our gross profit margin of 25.1% in 2014. Our average order size in 2020 was $1,910 and approximately 40% of our orders were delivered within 24 hours from receipt of the order.

​

Reliance has a proud heritage and demonstrated commitment to ethical business practices, sustainability and community engagement.

​

Our primary business strategy is to provide the highest levels of quality and service to our customers in the most efficient operational manner, allowing us to maximize our financial results. Our growth strategy is based on increasing our operating results through organic growth activities and strategic acquisitions that enhance our product, customer and geographic diversification. We continue to increase the proportion of our total sales that come from higher margin orders generated by our value-added metal processing capabilities (including toll processing) that we continue to expand, which can reduce the volatility in our profitability ratios during periods of unfavorable metals demand and/or pricing. We focus on improving the operating performance at acquired locations by integrating them into our operational model and providing them access to capital and other resources to promote growth and efficiencies. We believe our focused growth strategy of diversifying our products, customers and geographic locations and increasing the level of value-added services we provide our customers makes us less vulnerable to regional or industry-specific economic volatility and somewhat lessens the negative impact of volatility experienced in commodity pricing and cyclicality of our customer end markets, as well as general economic trends. We also believe that our focus on servicing customers with small order sizes and quick turnaround, along with our growth and diversification strategy have been instrumental in our ability to produce industry-leading operating results among publicly traded metals service center companies in North America.

​

We have one operating segment and one reportable segment — metals service centers. Further information about our reportable segment, including geographic information, appears in Note 18 — “Segment information” of Part II, Item 8 “Financial Statements and Supplementary Data.”

​

1

Table of Contents

Industry Overview

​

Metals service centers acquire carbon steel, aluminum, stainless and alloy steel and other metal products from primary metals producers, which we also refer to as mills, and then process these materials to meet customer specifications using techniques such as beam, bar, pipe and tube cutting; bending, forming and shaping; coil and flat roll processing; plate and sheet cutting; machining and various other specialized services such as laser cutting, fabricating, and electropolishing, among others. As a distributor and “first-stage” processor of metal products, our operations, by their nature, have a limited environmental impact as we do not emit significant amounts of carbon dioxide or other greenhouse gases.

​

Customers purchase from service centers for a variety of reasons, including the ability to obtain value-added metals processing, readily available inventory, reliable and timely delivery, flexible minimum order size, and quality control. Many customers deal exclusively with service centers because the quantities of metal products that they purchase are smaller than the minimum order sizes specified by mills or because those customers require intermittent deliveries over long or irregular periods. Metals service centers respond to a niche market created because of the focus on when-needed inventory management and materials management outsourcing in the capital goods and related industries. In general, metals service center customers have placed increased emphasis on carrying lower amounts of inventory, especially during declining price environments. We believe that many customers have also reduced their in-house processing capabilities, opting to source processed metal from service centers like us. We believe that such customer practices benefit metals services centers and we have invested significantly in innovative, state-of-the-art processing equipment in recent years. These investments have increased our ability to raise our selling prices and increase our gross profit margins as we provide higher quality products and increase the efficiency of our customers’ manufacturing operations.

​

The processing services we provide save our customers time, labor, and expense, reducing their overall manufacturing costs. Specialized metals processing equipment requires high utilization to be cost effective. Many manufacturers and their suppliers are not able or willing to invest in the necessary technology, equipment, and warehousing of inventory to efficiently and effectively perform metal processing for their own operations. Accordingly, we believe industry dynamics have created a niche in the market for metals service centers. Metals service centers purchase, process, and deliver metals to end-users in a more efficient and cost-effective manner than the end-user could achieve by dealing directly with the primary producer. Service centers comprise the largest customer group for North American mills, buying and reselling almost 50% of all the carbon, alloy, stainless and specialty steels, aluminum, copper, brass, bronze and superalloys produced in the United States according to a September 2020 report on the metals wholesaling industry issued by IBISWorld Inc., a global intelligence publication.

​

We believe that metals service centers are generally less susceptible to market cycles than metals producers because service centers are generally able to pass on all or a portion of increases in metal costs to their customers, unless they are selling to their customers on a fixed-price contractual basis. We believe that we are generally less vulnerable to changing metals prices than the metals producers due to our minimal contract sales and emphasis on rapid inventory turnover. However, fluctuations in metals pricing have a significant impact on our revenue and profit.

​

The metals service center industry is highly fragmented and competitive within localized areas or regions. Many of our competitors operate single, stand-alone service centers. According to IBISWorld Inc., there were approximately 9,400 metal wholesaling locations operated by approximately 6,800 companies in the United States in 2020. The significant number of metals service centers that exist in this fragmented market creates opportunities for us to expand by making acquisitions.

​

According to IBISWorld Inc.’s September 2020 report, the United States metals wholesale industry (which includes metals service centers) is expected to generate revenues of $188.58 billion in 2020, a decrease of 19.8% from 2019 revenues of $235.16 billion, due to declines in metal prices and demand. We believe that the decline in metals pricing is mainly attributable to the impacts on demand as a result of the COVID-19 pandemic. The four largest U.S. metals service center companies are expected by IBISWorld Inc. to represent less than 10% of the estimated $188.58 billion industry total in 2020. While we remain the largest metals service center company in the United States on a revenue basis, our 2020 U.S. revenues of $8.18 billion represented only about 4.3% of the entire U.S. market based on IBISWorld Inc.’s estimated 2020 industry revenues, leaving significant opportunity for further strategic growth within the industry.

​

2

Table of Contents

History and Overview of Reliance

​

In 2019, we celebrated our 80^th year in business since our original organization as a California corporation on February 3, 1939, operating a single metals service center in Los Angeles, California fabricating steel reinforcing bar. Within ten years of our founding, our metals service center had become a full-line distributor of steel and aluminum. In the early 1950s, we automated our materials handling operations and began to provide processing services to meet our customers’ requirements. In the 1960s, we began to acquire other companies to establish additional service centers, expanding into other geographic areas.

​

In the mid-1970s, we began to establish specialty metals centers stocked with inventories of selected metals such as aluminum, stainless steel or brass and copper, and equipped with automated materials handling and precision cutting equipment specific to the selected metals. In the mid-1990s, we began to expand nationally and continued to focus on acquiring well-run, profitable metals service center companies, and we continue to expand our network, with a focus on providing increased levels of value-added services and specialty products to our customers as opposed to merely distributing metal. We reincorporated in the State of Delaware in 2015. Our common stock is listed on the New York Stock Exchange (“NYSE”) under the symbol “RS” and was first traded on September 16, 1994.

​

We continue to execute our growth strategy and have become the largest North American (U.S. and Canada) metals service center company based on revenues, with approximately 300 locations and 2020 net sales of $8.81 billion. We continue to expand the types of metals that we sell and the processing services that we perform. We currently operate metals service centers under the following trade names:

​

3

Table of Contents

4

Table of Contents

​

Operational Strategy

​

Our executive officers maintain a control environment that is focused on integrity and ethical behavior. In addition, our executive officers establish policies, financial controls and operating guidelines, monitor performance, provide oversight and promote adherence to policies, guidelines and financial controls, while our division managers and subsidiary officers have autonomy with respect to day-to-day operations. This balanced yet entrepreneurial management style has enabled us to improve our safety performance and the productivity and profitability of both our acquired businesses and

5

Table of Contents

of our existing operations. Key management personnel are eligible for incentive compensation based, in part, on the profitability of their particular division or subsidiary and, in part, on the Company’s overall profitability.

​

Safety is our top priority and an important element of our culture and day-to-day operational focus. Our executive team supports a safety management system that includes policies, standard practices and goals at our facilities, including: (i) conducting regular safety assessments; (ii) monitoring best practices and compliance with regulatory requirements; (iii) integrating video-based safety programs into substantially all Company owned trucks; and (iv) including safety performance in compensation decisions. In addition, our safety professionals monitor compliance with regulatory requirements and conduct safety assessments and training to improve safety practices. Through these actions and initiatives, we improved our safety performance in 2020 with an approximately 23% reduction in our incident rate compared to 2019.

​

We seek to increase profitability through continuous improvements in our customer service, operational efficiencies, pricing discipline, innovation and inventory management as well as by providing increased levels of value-added processing. We continue to adjust our business practices to leverage our size and gain efficiencies which contribute to our profitability. We believe that we have an excellent reputation in the industry and are known for our integrity, strong employee relations and the quality and timeliness of our service.

​

Historically, we have expanded through both acquisitions and internal growth. Since our initial public offering in September 1994, we have successfully purchased 67 businesses. Our capital expenditure budgets have been at historically high levels in recent years. Our 2021 capital expenditure budget is $245 million; however we expect our 2021 actual capital expenditures will be higher due to additional spending on projects carried forward from our 2020 budget. Our capital expenditures have consisted of opening new facilities, adding to our processing capabilities, upgrading processing equipment, relocating existing operations to larger, more operationally efficient facilities, improving the safety and energy efficiency of our operating facilities and enhancing the working environments of our employees. Our investments in processing equipment have allowed us to increase the range of value-added services that we provide to our customers, which we believe has contributed to the recent increases in our gross profit margin. We believe these significant investments differentiate us from our competitors. We expect to continue growing our business through acquisitions and internal growth initiatives, particularly those that diversify our products, customer base and geographic locations and increase our sales of high-margin specialty products and value-added processing services.

​

Customers and Markets

​

We have more than 125,000 customers in a variety of industries, including general manufacturing, non-residential construction (including infrastructure), transportation (rail, truck trailer and shipbuilding), aerospace and defense, energy (oil and natural gas), electronics and semiconductor fabrication, and heavy industry (agricultural, construction and mining equipment). We also service the auto industry, primarily through our toll processing operations where we process the metal for a fee, without taking ownership of the metal.

​

Although we sell directly to many large original equipment manufacturer customers, the majority of our sales are to small machine shops and fabricators, in small quantities with frequent deliveries, helping them manage their working capital and credit needs more efficiently. Our metals service centers wrote and delivered over 4,603,000 orders during 2020 or an average of 18,190 per day, with an average price of approximately $1,910 per order. Most of our metals service center customers are located within a 200-mile radius of the Reliance metals service center serving them. The proximity of our service centers to our customers helps reduce total road miles and carbon emissions, promote efficient routing and provide quick delivery. With our fleet of approximately 1,670 trucks (some of which are leased), we are able to service many smaller customers and provide quick turnaround deliveries. We believe that maintaining our own fleet of trucks and drivers provides a competitive advantage in the current environment as third-party freight costs have been at elevated levels in recent years. Moreover, our order entry systems and flexible production scheduling enable us to meet customer requirements for short lead times and quick delivery, when needed. In 2020, approximately 98% of our orders were from repeat customers. We believe that our long-term relationships with many of our customers significantly contribute to the success of our business. Providing prompt and efficient services and quality products at reasonable prices are important factors in maintaining and expanding these relationships.

​

6

Table of Contents

We have built and opened international locations in recent years to service specific industries, typically making limited investments to support existing key U.S. customers that also operate in those international markets. Accordingly, our exposure to risks associated with such investments is minimal. Net sales of our international locations (based on where the shipments originated) accounted for approximately 7% of our consolidated 2020 net sales, or $631.2 million. However, our net sales to international customers (based on the shipping destination) were approximately 9% of our consolidated 2020 net sales or $834.7 million, with approximately 25% of our international sales, or $206.4 million, to Canadian customers.

​

Customer demand changes from time to time based on, among other things, general economic conditions and industry capacity. Many of the industries in which our customers compete are cyclical in nature. Because we sell to a wide variety of customers in a wide variety of industries, we believe that we are able to somewhat mitigate earnings volatility. In addition, many of our customers are small job shops and fabricators who also have a diverse customer base and the versatility to service different end markets when an existing market slows. Given our business model and focus on small, quick turnaround orders, we primarily operate in the spot market for both the purchase and sale of our products. As we have limited contractual business, this enables us to better pass on higher metal prices to our customers and maintain consistency in our gross profit margin.

​

Due to our focus on small orders, decentralized operating structure and the diversity of the markets we serve, customer concentrations are not significant. Our largest customer represented only 0.9% of our net sales in 2020. In 2020, we generated sales greater than $25 million from only 13 customers.

​

The geographic breakout of our sales based on the location of our metals service center facilities in each of the three years ended December 31 was as follows:

​

​

See Note 18 — “Segment information” of Part II, Item 8 “Financial Statements and Supplementary Data” for further information on U.S. and foreign revenues and assets.

​

Human Capital

​

At December 31, 2020, we employed approximately 12,800 persons worldwide, of which approximately 11,500 were employed in the United States. Our total workforce of approximately 13,200 persons at December 31, 2020 includes approximately 400 contract and temporary workers. During the second quarter of 2020, we experienced significantly decreased demand in nearly all of the end markets we serve as a result of customer shut-downs and project delays attributable to COVID-19. In response to such reduced demand, we made workforce reductions and furloughed employees when practicable. As demand increased following the reopening of our customers’ facilities during the year, we were very pleased to recall the majority of our furloughed workforce.

​

As of December 31, 2020, approximately 12% of our employees were represented by unions under collective bargaining agreements. We have entered into collective bargaining agreements with 40 union locals at 51 of our locations. These collective bargaining agreements have not had a material impact on our revenues or profitability at our various locations. From time to time, our collective bargaining agreements expire and come up for renegotiation. Approximately 700 employees are covered by 25 different collective bargaining agreements that expire in 2021.

​

7

Table of Contents

We seek to create an environment that values the health, safety and wellness of our employees, their families and the communities in which we live and do business. We work to equip our employees with the knowledge, skills and resources to safely conduct our business and develop in their careers. A highlight of our commitment to our employees is the inclusion of “People” as one of our six core values that represent key areas of focus for our company. For more information on the Company’s core values, see the Company’s Code of Conduct available at investor.rsac.com. Among the critical elements included in the People category are the following:

​

​

Rooted in our fundamental commitment to the health, safety and wellness of our employees, their families and the communities in which we live and do business, we leveraged the core values of our culture of safety to respond to the COVID-19 pandemic:

​

​

For a detailed discussion of the impact of the COVID-19 pandemic on our human capital resources, see the risk factor captioned “The COVID-19 global pandemic may materially and adversely impact our business, financial condition, results of operations and cash flows” Item 1A. “Risk Factors” of this Form 10-K.

​

​

8

Table of Contents

​

​

​

Suppliers

​

We primarily purchase our inventory from the major domestic metals producers. We do, however, also purchase limited amounts of certain products from foreign producers. We have multiple suppliers for all of our products.

​

Because of our total volume of purchases and our long-term relationships with our suppliers, we believe that we are generally able to purchase inventory at the best prices offered by our suppliers. We believe that these relationships provide us an advantage in our ability to source product and have it available for our customers in accelerated timeframes when needed, and also allows us to more efficiently manage our inventory. In the second quarter of 2020, our suppliers supported our efforts to rightsize our inventory following COVID-19-related shutdowns and project delays and provided us an uninterrupted supply of high-quality metal products during the fourth quarter of 2020 when conditions decreased the availability of some products in the marketplace. We believe that we are not dependent on any one supplier for our metal inventory. We believe both our size and our long-term relationships with our suppliers continue to be important because mill consolidation has reduced the number of suppliers.

​

Backlog

​

Because of the when-needed delivery and the short lead-time nature of our business, we do not believe information on our backlog of orders is meaningful to an understanding of our business.

​

Capital Expenditures

​

We maintained our focus on internal growth in 2020 by opening new facilities, building or expanding existing facilities, adding processing equipment, improving the safety of our operations and enhancing the working environments of our employees with capital expenditures of $172.0 million, the majority of which were growth-related. Our 2021 capital expenditure budget is $245 million; however we expect our 2021 actual capital expenditures will be higher due to additional spending on projects carried forward from our 2020 budget. The majority of our capital expenditure budget consists of opening new facilities, adding to our processing capabilities, upgrading processing equipment, and improving the energy efficiency of our operating facilities. The amount of our capital expenditure budget reflects our confidence in our long-term prospects; however, we will continue to evaluate and execute each growth project and consider the economic conditions and outlook at the time of investment. We estimate our annual maintenance capital expenditures at approximately $80 to $90 million, which allows us to significantly reduce our capital expenditures if economic conditions

9

Table of Contents

warrant a more conservative approach to capital allocation and provides flexibility to redirect capital to other strategic priorities.

​

Products and Processing Services

​

We provide a wide variety of processing services to meet our customers’ specifications and deliver products to fabricators, manufacturers and other end users. In recent years, we have made significant investments to enhance our toll processing and value-added metal processing capabilities. We maintain a wide variety of products in inventory, and believe this differentiates us from all other North American service centers. Approximately 40% of our orders were delivered within 24 hours from receipt of the order. This provides a competitive advantage to us, and, for the remainder of our orders we typically have shorter lead times than our competitors given our decentralized structure and investments in processing equipment. Our product mix has become more diverse mainly as a result of our targeted growth strategy to acquire companies that distribute mainly specialty products and provide increased levels of value-added processing services. We have made significant capital expenditure investments that have totaled nearly $1 billion over the past five years. In 2020, we performed value-added processing on 49% of the orders we shipped, significantly higher than our historical rate of approximately 40%. These significant investments have expanded our value added processing capabilities that our managers in the field have successfully leveraged to increase the percentage of our orders with value added processing, which has significantly contributed to our record gross profit margin of 31.5% that is 640 basis points higher than our gross profit margin of 25.1% in 2014. We believe our investments in state-of-the-art equipment and advanced technology coupled with our focus on maintaining pricing discipline related to our processing services were significant contributors to the substantial increases in gross profit margin over the past several years. We also believe increasing the proportion of our total sales that come from higher margin orders generated by our value-added metal processing capabilities (including toll-processing) that we continue to expand can reduce the volatility in our profitability ratios during periods of unfavorable metals demand and/or pricing.

10

Table of Contents

Our gross sales dollars by product type as a percentage of total sales in each of the three years ended December 31 were as follows:

​

​

We are not dependent on any particular customer group or industry because we process and distribute a variety of metals. This diversity of product type and material reduces our exposure to fluctuations or other weaknesses in the financial stability of particular customers or industries. We are also less dependent on any particular suppliers as a result of our product diversification.

​

For sheet and coil products, we purchase coiled metal from primary producers in the form of a continuous sheet, typically 36 to 60 inches wide, between 0.015 and 0.25 inches thick, and rolled into 3-to-20 ton coils. The size and weight of these coils require specialized equipment to move and process the material into smaller sizes and various products. Many of the other products that we carry also require specialized equipment for material handling and processing. We believe few of our customers have the capability to process the metal into the desired sizes or the capital available to acquire the necessary equipment.

​

We believe that few metals service centers offer the broad range of processing services and metals that we provide. In addition to a focus on growing our revenues from specialty products, we have also increased the amount of value-added

11

Table of Contents

processing services we provide through recent acquisitions and significant investments in new equipment over the past few years.

​

After receiving an order, we enter it into one of our order entry systems, select appropriate inventory and schedule processing to meet the specified delivery date. In 2020, we delivered approximately 40% of our orders within 24 hours of the customer placing the order with us. We attempt to maximize the yield from the various metals that we process by combining customer orders to use each product that we purchase to the fullest extent practicable.

​

In 2020, we performed processing services for approximately 49% of our sales orders. Our primary processing services range from cutting, leveling or sawing to more complex processes such as machining or electropolishing. Throughout our service centers we perform most processes available in the marketplace, without encroaching upon the services performed by our customers. Consistent with our growth strategy, we continue to increase our offering of higher-margin value-added services, including certain fabrication processes in select geographic areas at the request of our customers.

​

We generally only process specific metals to non-standard sizes pursuant to customer purchase order specifications. In addition, we typically acquire standard size and grade products that can be processed into many different sizes to meet the needs of many different customers. We do not maintain a significant inventory of finished products, but we carry a wide range of metals to meet our customers’ short lead time and when-needed delivery requirements. Our metals service centers maintain inventory and equipment selected to meet the needs of that facility’s customers. We work with our customers to understand their needs and identify areas where we can provide additional value, increasing our importance to them.

​

Sales and Marketing

​

As of December 31, 2020, we had approximately 1,800 sales personnel. We believe that our sales force has extensive product, service, market and customer knowledge. Sales personnel are organized by division or subsidiary and are divided into two groups. Outside sales personnel travel throughout a specified geographic territory and maintain relationships with our existing customers and develop new customers. Inside sales personnel remain at the facilities to price and write orders. Outside sales personnel generally receive incentive compensation based on the gross profit from their particular geographic territories. Inside sales personnel generally receive incentive compensation based on the gross profit and/or pretax income of their particular location.

​

Our business is relationship-based and because of that, we operate under many different trade names. We acquire well-run businesses with strong customer relationships and solid reputations within the marketplace. Because of this, we find value in the acquired trade name and continue to use the business name and maintain the customer relationships.

​

Competition

​

The metals service center industry is highly fragmented and competitive. We have numerous competitors in each of our product lines and geographic locations, and competition is most frequently local or regional. Our domestic service center competitors are generally smaller than we are, but we also face strong competition from national, regional and local independent metals distributors and the producers themselves, some of which have greater resources than we do.

​

We compete with other companies on price, service, quality, processing capability and availability of products and services. We maintain relationships with our major suppliers at the executive and local levels. We believe that this division of responsibility has increased our ability to obtain competitive prices of metals by leveraging our total size and to provide more responsive service to our customers by allowing our local management teams to make the purchasing decisions. In addition, we believe that the size of our inventory, the diversity of metals products we have available, and the wide variety of processing services we provide distinguish us from our competition. We believe our competitors are generally unable to offer the same high-quality products and services we provide using state-of-the-art equipment and advanced technology as they do not have the financial ability or risk tolerance to grow their businesses at the same rate as Reliance. We believe our industry-leading financial results in recent years were due to our strong financial condition, the high quality of products and services we are able to offer as a result of our significant investments in our acquired businesses, facilities and equipment, as well as our continued focus on small order sizes with quick turnaround.

12

Table of Contents

​

Quality Control

​

Procuring high-quality metal from suppliers on a consistent basis is critical to our business. We have instituted strict quality control measures to assure that the quality of purchased raw materials will enable us to meet our customers’ specifications and to reduce the costs of production interruptions. In certain instances, we perform physical and chemical analyses on selected raw materials, typically through a third-party testing lab, to verify that mechanical and dimensional properties, cleanliness and surface characteristics meet our requirements and our customers’ specifications. We also conduct certain analyses of surface characteristics on selected processed metal before delivery to the customer. We believe that maintaining high standards for accepting metals ultimately results in reduced return rates from our customers.

​

We maintain various quality certifications throughout our operations. Approximately 50% of our operating locations have earned International Organization for Standardization (ISO 9001:2015) certifications. Many of our locations maintain additional certifications specific to the industries they serve, such as aerospace, auto, nuclear, and others, including certain international certifications.

​

Government Regulation

​

Our operations are subject to many foreign, federal, state and local requirements to protect the environment, including hazardous waste disposal and underground storage tank regulations. Our policy is to comply with all such requirements and regulations. The only hazardous substances that we generally use in our operations are lubricants, cleaning solvents and diesel for fueling our trucks. We pay state-certified private companies to haul and dispose of the limited amounts of hazardous waste our operations produce. Beyond our compliance requirements with environmental regulations, compliance with other government regulations has not had, and based on laws and regulations currently in effect, is not expected to have a material effect on the Company's capital expenditures, earnings or competitive position. 

​

Our operations are also subject to laws and regulations relating to workplace safety and worker health, principally the Occupational Safety and Health Act and related regulations, which, among other requirements, establish noise, dust and safety standards. We maintain comprehensive health and safety policies and encourage our employees to follow established safety practices. Safety of our employees and others is critical to our success. We continue to expand and improve our internal safety resources, which has contributed positively to our safety metrics and financial results. We encourage social well-being by instituting these high-quality labor, health and safety standards.

​

We are subject to the conflict mineral provisions of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. We are required to undertake due diligence, disclose and report whether the products we sell originate from the Democratic Republic of Congo and adjoining countries. We verify with our suppliers the origins of all metals used in our products.

​

We sell metals to foreign customers and otherwise operate abroad, subjecting us to various countries’ trade regulations concerning the import and export of materials and finished products. Our operations are subject to the laws and regulations of the jurisdictions in which we conduct our business that seek to prevent corruption and bribery in the marketplace, including the United States’ Foreign Corrupt Practices Act (the “FCPA”) and the United Kingdom’s Bribery Act 2010. We have developed and implemented company-wide export and anti-corruption policies designed to provide our employees clear statements of our compliance requirements and to ensure compliance with applicable export and anti-corruption regulations. For information about risks related to government regulation, please see the risk factors set forth under the caption Item 1A. “Risk Factors” including the Risk Factors captioned “We are subject to various environmental, employee safety and health, and customs and export laws and regulations, which could subject us to significant liabilities and compliance expenditures;” “We operate internationally and are subject to exchange rate fluctuations, exchange controls, political risks and other risks relating to international operations;” and “Our international operations continue to expand, exposing us to additional risks.”

​

13

Table of Contents

Environmental

​

We are committed to mitigating the impact that our products and operations may have on the environment. As a distributor and “first-stage” processor of metal products, our operations, by their nature, have a limited environmental impact as we do not emit significant amounts of carbon dioxide or other greenhouse gases.

​

Our operations involve steel and aluminum, which are inherently sustainable products, as they (i) are some of the most commonly-recycled materials in the United States and (ii) can be 100% recycled without loss of quality. We believe steel, one of our most significant products, is the most recycled material on the planet—more than plastic, paper, and glass combined each year. In 2020, we reintroduced over 430 million pounds of recycled scrap material into the manufacturing life cycle.

​

We continue to evaluate and implement energy conservation and other initiatives to reduce pollution and our environmental impact. Enactment of more stringent environmental regulations could have an adverse impact on our financial results.

​

Some of the properties we own or lease are located in industrial areas with histories of heavy industrial use. We may incur some environmental liabilities because of the location of these properties. In addition, we are currently involved with a certain environmental remediation project related to activities at former manufacturing operations of Earle M. Jorgensen Company (“EMJ”), our wholly owned subsidiary, that were sold many years prior to our acquisition of EMJ in 2006. Although the potential cleanup costs could be significant, EMJ maintained insurance policies during the time they owned the manufacturing operations that have covered substantially all of our expenditures related to this matter to date, and are expected to continue to cover the majority of the related costs. We do not expect that these obligations will have a material adverse impact on our financial position, results of operations or cash flows.

​

Seasonality

​

Some of our customers are in seasonal businesses, especially customers in the construction industry and related businesses. Our overall operations have not shown any material seasonal trends as a result of our geographic, product and customer diversity. Typically, revenues in the months of July, November and December have been lower than in other months because of a reduced number of working days for shipments of our products, resulting from holidays observed by the Company as well as vacation and extended holiday closures at some of our customers. The number of shipping days in each quarter also has a significant impact on our quarterly sales and profitability. Particularly in light of COVID-19, we cannot predict whether period-to-period fluctuations will be consistent with historical patterns. Results of any one or more quarters are therefore not necessarily indicative of annual results.

​

Available Information

​

We file annual, quarterly and current reports, proxy statements and other documents with the SEC under the Exchange Act. The SEC maintains a website that contains reports, proxy statements and other information regarding issuers, including our Company, that file reports electronically with the SEC. The public can obtain any reports that we file with the SEC at http://www.sec.gov.

​

Our Investor Relations website is located at http://investor.rsac.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 are made available, free of charge, through our website as soon as reasonably practical after we electronically file or furnish the reports to the SEC. We encourage investors to visit our website.

​

The website addresses presented above are not intended to function as hyperlinks, and the information contained in our website and in the SEC’s website is not intended to be a part of this filing.

​

14

Table of Contents

Item 1A.  Risk Factors

​

Set forth below are the risks that we believe are material to our investors. Our business, results of operations and financial condition may be materially adversely affected due to any of the following risks. The risks described below are not the only ones we face. Additional risks of which we are not presently aware or that we currently believe are immaterial may also harm our business.

​

Risks Related to Our Business and Industry

​

The COVID-19 global pandemic has adversely impacted our business, financial condition, results of operations and cash flows, and may have material and adverse effects in the future.

​

The global outbreak of COVID-19 was declared a pandemic by the World Health Organization and a national emergency by the U.S. Government in March 2020 and has negatively affected the U.S. and global economy, disrupted global supply chains, resulted in significant travel and transport restrictions, including mandated closures and orders to “shelter-in-place,” and created significant disruption of the financial markets. These factors led to reduced demand of our products and services in all end markets we sell to. During 2020, our tons sold declined 10.8% from 2019 primarily due to the adverse impacts of COVID-19. The extent of the impact of the COVID-19 pandemic on our operational and financial performance will depend on future developments which are highly uncertain, including the severity and duration of the pandemic, any reemergence or mutations of the virus, the actions taken to control the spread of COVID-19 or treat its impact, including the speed and effectiveness of vaccination efforts, and the direct and indirect effects of the virus on worldwide and U.S. economic conditions. 

​

Volatility in the stock market caused by COVID-19 could result in a material impairment of goodwill or indefinite-lived intangible assets. Continued negative impacts to the markets we service due to COVID-19 or additional stock market volatility could result in a decline in our market capitalization that may result in goodwill and/or indefinite-lived intangible asset impairment charges that could be material.

​

While most of our facilities continue to operate as essential businesses under the United States Department of Homeland Security Cybersecurity and Infrastructure Security Agency guidance, facility closures, work slowdowns or temporary stoppages could occur at all or some of our facilities due to new government regulations or decreased demand for our products and services. In many cases, our facilities are not operating under full staffing as a result of COVID-19, which could have a longer-term adverse impact on our business. Any prolonged slowdown or stoppage at our facilities may adversely affect our business, financial condition and results of operations and such impact may be material. We may face unpredictable increases in demand for certain of our products when restrictions on business and travel end. If demand for our products exceeds our capacity, it could adversely affect our financial results and customer relationships. In addition, the ability of our employees and our suppliers’ and customers’ employees to work may be impacted by individuals contracting or being exposed to COVID-19, and any such impact may be material.

​

We continue to work with our stakeholders (including customers, employees, suppliers, business partners and local communities) to responsibly address this global pandemic. We will continue to monitor the situation and assess possible implications to our business and our stakeholders and will take appropriate actions in an effort to mitigate adverse consequences, including through adjusting our capital allocation priorities to focus on cash preservation, if warranted. We cannot assure you that we will be successful in any such mitigation efforts. Although the duration and ultimate impact of these factors is unknown at this time, the decline in economic conditions due to COVID-19, or another disease causing similar impacts, may adversely affect our business, financial condition and results of operations and such impact may be material. Further deteriorations in economic and public health conditions, as a result of the COVID-19 pandemic or otherwise, could lead to disruptions in our supply chain and metals commodities pricing. A further or prolonged decline in demand for our products, additional facility closures, or recognition of additional impairment charges could materially and adversely impact our business or operating results. We have a substantial amount of indebtedness outstanding, and if we experience continued significant declines in sales as a result of the pandemic, our business may not be able to generate cash flow from operations or access additional borrowings on our revolving credit facility in amounts sufficient to enable us to pay our debts and fund our other liquidity needs. The continued spread of COVID-19 has also led to disruption and volatility in the global capital markets and credit markets, which depending on future developments could impact our

15

Table of Contents

capital resources and liquidity in the future. In addition, we may be susceptible to increased litigation related to, among other things, the financial impacts of COVID-19 on our business, our ability to meet contractual obligations due to the pandemic, employment practices or policies adopted during the pandemic, or litigation related to individuals contracting COVID-19 as a result of alleged exposures on our premises.

​

The costs that we pay for metals fluctuate due to a number of factors beyond our control, and such fluctuations could adversely affect our operating results, particularly if we cannot pass on higher metal prices to our customers.

​

We purchase large quantities of aluminum, carbon, stainless and alloy steel and other metals, which we sell to a variety of customers. The price of metals we purchase and the price we charge our customers for the products we sell change based on many factors outside of our control, including general economic conditions (both domestic and international), competition, production levels, raw material costs, customer demand levels, import duties and other trade restrictions, currency fluctuations and surcharges imposed by our suppliers. We attempt to pass cost increases on to our customers with higher selling prices but we are not always able to do so, particularly when the cost increases are not demand driven. When metal prices decrease, we often cannot replace our higher cost inventory with the lower cost metal at a rate that would allow us to maintain a consistent gross profit margin, which would reduce our profitability during that interim period.

​

Metal prices are volatile due to, among other things, fluctuations in foreign and domestic production capacity, raw material availability and related pricing, metals consumption, tariffs, import levels into the U.S., and the strength of the U.S. dollar relative to other currencies. Future changes in global general economic conditions or in production, consumption or export of metals could cause fluctuations in metal prices globally, which could adversely affect our profitability and cash flows. We generally do not enter into long-term agreements with our suppliers or hedging arrangements that could lessen the impact of metal price fluctuations.

​

We maintain substantial inventories of metal to accommodate the short lead times and delivery requirements of our customers. Our customers typically purchase products from us pursuant to purchase orders and typically do not enter into long-term purchase agreements or arrangements with us. Accordingly, we purchase metal in quantities we believe to be appropriate to satisfy the anticipated needs of our customers based on information derived from customers, market conditions, historic usage and industry research. Commitments for metal purchases are generally at prevailing market prices in effect at the time orders are placed or at the time of shipment. During periods of rising metal costs, our results may be negatively impacted by increases in the costs of the metals we purchase if we are unable to make equivalent increases in the selling prices of the products we sell. In addition, when metal prices decline, our selling prices generally decline and, as we sell inventory purchased at higher costs, results in lower gross profit margins. Consequently, during periods in which we sell this existing inventory, the effects of changing metal prices could adversely affect our operating results.

​

Excess capacity and over-production by foreign metal producers or decreases in tariffs could increase the level of metal imports into the U.S., resulting in lower domestic prices, which would adversely affect our sales, margins and profitability.

​

Global metal-making capacity exceeds demand for metal products in some regions around the world. Rather than reducing employment by rationalizing capacity with consumption, we believe metal manufacturers in many countries (often with government assistance or subsidies in various forms) have periodically exported metal at prices which may not reflect their costs of production or capital. Excessive imports of metal into the U.S. have exerted, and may continue to exert, downward pressure on U.S. metal prices.

​

On March 1, 2018, the United States announced a plan to indefinitely impose a 25 percent tariff on certain imported steel products and a 10 percent tariff on certain imported aluminum products under Section 232 of the Trade Expansion Act of 1962 (the “Section 232”) tariffs. Application of the tariffs commenced March 23, 2018, with temporary or long-term exemptions for a number of countries and subject to a product exemption process.

​

These tariffs have triggered retaliatory actions by certain affected countries, and other foreign governments have initiated or are considering imposing trade measures on steel and aluminum produced in the United States. To the extent

16

Table of Contents

these tariffs and other trade actions result in a decrease in international demand for steel and aluminum produced in the United States or otherwise negatively impact demand for our products, our business may be adversely impacted.

​

We expect that these tariffs, while in effect, will discourage metal imports from non-exempt countries. These tariffs have had a favorable impact on the prices of the products we sell and our results of operations. If these or other tariffs or duties expire or if others are relaxed or repealed, or if relatively higher U.S. metal prices make it attractive for foreign metal producers to export their products to the U.S., despite the presence of duties or tariffs, the resurgence of substantial imports of foreign steel could create downward pressure on U.S. metal prices which could have a material adverse effect on our potential earnings and future results of operations.

​

Currency fluctuations and changes in the worldwide balance of supply and demand could negatively impact our profitability and cash flows.

​

Significant currency fluctuations in the United States or abroad could negatively impact our cost of metals and the pricing of our products. A decline in the U.S. dollar relative to foreign currencies may result in increased prices for metals and metal products in the United States and reduce the amount of metal imported into the U.S. as imported metals become relatively more expensive. We may not be able to pass these increased costs on to our customers. If the value of the U.S. dollar improves relative to foreign currencies, this may result in increased metal being imported into the U.S., which in turn may pressure existing domestic prices for metal. This could also occur if global economies are weaker than the U.S. economy, creating a significant price spread between the U.S. and foreign markets.

​

We operate in an industry that is subject to cyclical fluctuations and any downturn in general economic conditions or in our customers’ specific industries could negatively impact our profitability and cash flows.

​

The metals service center industry is cyclical and impacted by both market demand and metals supply. Periods of economic slowdown such as the current recession in the United States and in other countries decrease the demand for our products and adversely affect our pricing. If either demand or pricing were to decline from the current levels, this could reduce our profitability and cash flows.

​

We sell many products to industries that are cyclical, such as the non-residential construction, semiconductor, energy, aerospace and heavy equipment industries. Although many of our direct sales are to sub-contractors or job shops that may serve many customers and industries, the demand for our products is directly related to, and quickly impacted by, demand for the finished goods manufactured by customers in these industries, which may change as a result of changes in the general U.S. or worldwide economy, domestic exchange rates, energy prices or other factors beyond our control.

​

We compete with a large number of companies in the metals service center industry, and, if we are unable to compete effectively, our profitability and cash flows may decline.

​

We compete with a large number of other general-line distributors and processors, and specialty distributors in the metals service center industry. Competition is based principally on price, inventory availability, timely delivery, customer service, quality and processing capabilities. Competition in the various markets in which we participate comes from companies of various sizes, some of which have more established brand names in the local markets that we serve. To compete for customer sales, we may lower prices or offer increased services at a higher cost, which could reduce our profitability and cash flows. Rapidly declining prices and/or demand levels may escalate competitive pressures, with service centers selling at substantially reduced prices, and sometimes at a loss, in an effort to reduce their high cost inventory and generate cash. Any increased and/or sustained competitive pressure could cause our share of industry sales to decline along with our profitability and cash flows.

​

If we were to lose any of our primary suppliers or otherwise be unable to obtain sufficient amounts of necessary metals on a timely basis, we may not be able to meet our customers’ needs and may suffer reduced sales.

​

We have few long-term contracts to purchase metals. Therefore, our primary suppliers of aluminum, carbon, stainless and alloy steel or other metals could curtail or discontinue their delivery of these metals to us in the quantities we need with little or no notice. Our ability to meet our customers’ needs and provide value-added inventory management services

17

Table of Contents

depends on our ability to maintain an uninterrupted supply of high-quality metal products from our suppliers. If our suppliers experience production problems, lack of capacity or transportation disruptions, the lead times for receiving our supply of metal products could be extended and the cost of our inventory may increase. If, in the future, we are unable to obtain sufficient amounts of the necessary metals at competitive prices and on a timely basis from our customary suppliers, we may not be able to obtain these metals from acceptable alternative sources at competitive prices to meet our delivery schedules. Even if we do find acceptable alternative suppliers, the process of locating and securing these alternatives may be disruptive to our business, which could have an adverse impact on our ability to meet our customers’ needs and reduce our profitability and cash flows. In addition, if a significant domestic supply source is discontinued and we cannot find acceptable domestic alternatives, we may need to find foreign sources of supply. Using foreign sources of supply could result in longer lead times, increased price volatility, less favorable payment terms, increased exposure to foreign currency movements and certain tariffs and duties and require greater levels of working capital. Alternative sources of supply may not maintain the quality standards that are in place with our current suppliers that could impact our ability to provide the same quality of products to our customers that we have provided in the past, which could cause our customers to move their business to our competitors or to file claims against us, and such claims may be more difficult to pass through to foreign suppliers.

​

There has been significant consolidation at the metal producer level both globally and within the U.S. This consolidation has reduced the number of suppliers available to us, which may limit our ability to obtain the necessary metals to service our customers. The number of available suppliers may be further reduced if the general economy enters into another recession. Lower metal prices and lower demand levels may cause certain mills to reduce their production capacity and, in that case, the mill may operate at a loss, which could cause one or more mills to discontinue operations if the losses continue over an extended period of time or if the mill cannot obtain the necessary financing to fund its operating costs.

​

We rely upon our suppliers as to the specifications of the metals we purchase from them.

​

We rely on mill certifications that attest to the physical and chemical specifications of the metal received from our suppliers for resale and generally, consistent with industry practice, we do not undertake independent testing of such metals unless independent tests are required by customers. We rely on customers to notify us of any metal that does not conform to the specifications certified by the supplying mill. Although our primary sources of products have been domestic mills, we have and will continue to purchase product from foreign suppliers when we believe it is appropriate. In the event that metal purchased from domestic suppliers is deemed to not meet quality specifications as set forth in the mill certifications or customer specifications, we generally have recourse against these suppliers for both the cost of the products purchased and possible claims from our customers. However, such recourse will not compensate us for the damage to our reputation that may arise from substandard products and possible losses of customers. Moreover, there is a greater level of risk that similar recourse will not be available to us in the event of claims by our customers related to products from foreign suppliers that do not meet the specifications set forth in the mill certifications. In such circumstances, we may be at greater risk of loss for claims for which we do not carry, or carry insufficient, insurance.

​

Climate change might adversely impact our supply chain or our operations.

​

Concern about climate change might result in new legal and regulatory requirements to reduce or mitigate the effects of climate change. While we believe our operations do not emit significant amounts of carbon dioxide or other greenhouse gases, such legal or regulatory changes  may result in higher prices for metal, higher prices for utilities required to run our facilities, higher fuel costs for us and our suppliers and other adverse impacts. To the extent that new legislation or regulations increase our costs, we may not be able to fully pass these costs on to our customers without a resulting decline in sales and adverse impact to our profits.

​

There is also increased focus by governmental and non-governmental entities on sustainability matters. Any perception that we have failed to act responsibly regarding climate change could result in negative publicity and adversely affect our business and reputation.

​

18

Table of Contents

We face increased competition from alternative materials and risks concerning innovation, new technologies, products and increasing customer requirements.

​

As a result of increasingly stringent regulatory requirements, designers, engineers and industrial manufacturers, especially those in the automotive industry, are increasing their use of lighter weight and alternative materials, such as composites, plastics, glass and carbon fiber. Use of such materials could reduce the demand for metal products, which may reduce our profitability and cash flow.

​

If metals prices increase compared to certain substitute materials, the demand for our products could be negatively impacted, which could have an adverse effect on our financial results.  

​

In certain applications, metal products compete with other materials, such as composites, glass, carbon fiber, wood and plastic. Prices of all of these materials fluctuate widely, and differences between the prices of these materials and the price of metal products may adversely affect demand for our products and/or encourage material substitution, which could adversely affect the prices of and demand for metal products. The higher cost of metal relative to certain other materials may make material substitution more attractive for certain uses.

​

Our insurance coverage, customer indemnifications or other liability protections may be unavailable or inadequate to cover all of our significant risks or our insurers may deny coverage of or be unable to pay for material losses we incur, which could adversely affect our profitability and overall financial position.

​

We strive to obtain insurance agreements from financially solid, highly rated counterparties in established markets to cover significant risks and liabilities. Not every risk or liability can be insured, and for risks that are insurable, the policy limits and terms of coverage reasonably obtainable in the market may not be sufficient to cover all actual losses or liabilities incurred. Even if insurance coverage is available, we may not be able to obtain it at a price or on terms acceptable to us. Disputes with insurance carriers, including over policy terms, reservation of rights, the applicability of coverage (including exclusions), compliance with provisions (including notice) and/or the insolvency of one or more of our insurers may significantly affect the amount or timing of recovery.

​

In some circumstances we may be entitled to certain legal protections or indemnifications from our customers through contractual provisions, laws, regulations or otherwise. However, these protections are not always available, are typically subject to certain terms or limitations, including the availability of funds, and may not be sufficient to cover all losses or liabilities incurred.

​

If insurance coverage, customer indemnifications and/or other legal protections are not available or are not sufficient to cover our risks or losses, it could have a material adverse effect on our financial position, results of operations and/or cash flows.

​

An increase in delinquencies or net losses of customers could adversely affect our results.

​

Inherent in the operation of our business is the credit risk associated with our customers. The creditworthiness of each customer and the rate of delinquencies and net losses on customer obligations are directly impacted by several factors, including relevant industry and economic conditions, the availability of capital, the experience and expertise of the customer's management team, commodity prices and political events. Any increase in delinquencies and credit losses on customer obligations could have a material adverse effect on our earnings and cash flows. In addition, although we evaluate and adjust allowances for credit losses related to past due and non-performing receivables on a regular basis, adverse economic conditions or other factors that might cause deterioration of the financial health of our customers could change the timing and level of payments received and thus necessitate an increase in our estimated losses, which could also have a material adverse effect on our earnings and cash flows.

​

If we do not successfully implement our growth strategy, our ability to grow our business could be impaired.

​

We may not be able to identify suitable acquisition candidates or successfully complete any acquisitions or integrate any other businesses into our operations. If we cannot identify suitable acquisition candidates or are otherwise unable to

19

Table of Contents

complete acquisitions, we may not be able to continue to grow our business as expected and, if we cannot successfully integrate recently acquired businesses, we may incur increased or redundant expenses. Moreover, any additional indebtedness we incur to pay for these acquisitions could adversely affect our liquidity and financial condition.

​

We have invested a significant amount of capital in new locations and new processing capabilities. We may not continue to identify sufficient opportunities for internal growth to be able to sustain growth at similar levels. In addition, we may not realize the expected returns from these investments.

​

Acquisitions present many risks, and we may not realize the financial and strategic goals that were contemplated at the time of each transaction.

​

Since our initial public offering in September 1994, we have successfully purchased 67 businesses. We continue to evaluate acquisition opportunities and expect to continue to grow our business through acquisitions in the future. Risks we may encounter in acquisitions include:

​

​

​

​

​

​

​

​

​

​

​

​

​

​

20

Table of Contents

​

​

​

These factors could have a material adverse effect on our business, results of operations, financial condition or cash flows, particularly in the case of a larger acquisition or the completion of a number of acquisitions in any short period of time.

​

In addition, most of the acquisition agreements we have entered into require the former owners to indemnify us against certain liabilities related to the operation of those companies before we acquired them. In most of these agreements, however, the liability of the former owners is limited and certain former owners may be unable to meet their indemnification responsibilities. Similarly, the purchasers of our non-core businesses may from time to time agree to indemnify us for operations of such businesses after the closing. We cannot be assured that any of these indemnification provisions will fully protect us, and as a result we may face unexpected liabilities that adversely affect our consolidated results of operations, financial condition and cash flows.

​

We are a decentralized company, which presents certain risks.

​

With a diverse geographic footprint in both North America and internationally, we believe our decentralized structure has catalyzed our growth and enabled us to remain responsive to opportunities and to our customers’ needs by leaving significant control and decision-making authority and accountability in the hands of local management. Because we are decentralized, we may be slower to detect compliance-related problems (e.g., a rogue employee undertaking activities that are prohibited by applicable law or by our internal policies) and “company-wide” business initiatives, such as the integration of disparate information technology systems, are often more challenging and costly to implement than they would be in a more centralized environment. Depending on the nature of the problem or initiative in question, such failure could materially adversely affect our business, financial condition or results of operations.

​

As a decentralized business, we depend on both senior management and our key operating employees. If we are unable to attract and retain these individuals, our ability to operate and grow our business may be adversely affected.

​

Because of our decentralized operating structure, we depend on the efforts of our senior management, including our Chief Executive Officer, James Hoffman, our President, Karla Lewis, and our Chief Financial Officer, Arthur Ajemyan, and other senior management, as well as our key operating employees. We may not be able to retain these individuals or attract and retain additional qualified personnel when needed. We do not have employment agreements with any of our corporate officers or most of our key employees, so they may have less of an incentive to continue their employment with us when presented with alternative employment opportunities. The compensation of our officers and key employees is heavily dependent on our financial performance and in times of reduced financial performance this may cause our employees to seek other employment opportunities. The loss of any key officer or employee will require remaining officers and employees to direct immediate and substantial attention to identifying and training a replacement. Our inability to retain members of our senior management or key operating employees or to find adequate replacements for any departing key officer or employee on a timely basis could adversely affect our ability to operate and grow our business.

​

We are subject to various environmental, employee safety and health, and customs and export laws and regulations, which could subject us to significant liabilities and compliance expenditures.

​

We are subject to foreign, federal, state and local environmental laws and regulations concerning air emissions, wastewater discharges, underground storage tanks and solid and hazardous waste disposal at or from our facilities. Our operations are also subject to various employee safety and health laws and regulations, including those concerning occupational injury and illness, employee exposure to hazardous materials and employee complaints. We are also subject

21

Table of Contents

to customs and export laws and regulations for international shipment of our products. Environmental, employee safety and health, and customs and export laws and regulations are comprehensive, complex and frequently changing. Some of these laws and regulations are subject to varying and conflicting interpretations. We are subject from time to time to administrative and/or judicial proceedings or investigations brought by private parties or governmental agencies with respect to environmental matters, employee safety and health issues or customs and export issues. Proceedings and investigations with respect to environmental matters, any employee safety and health issues or customs and export issues could result in substantial costs to us, divert our management’s attention and result in significant liabilities, fines or the suspension or interruption of our service center activities. Some of our current properties are located in industrial areas with histories of heavy industrial use. The location of these properties may require us to incur environmental expenditures and to establish accruals for environmental liabilities that arise from causes other than our operations. In addition, we are currently remediating contamination in connection with a certain property related to activities at former manufacturing operations of a subsidiary we acquired. Future events, such as changes in existing laws and regulations or their enforcement, new laws and regulations or the discovery of conditions not currently known to us, could result in material environmental or export compliance or remedial liabilities and costs, constrain our operations or make such operations more costly.

​

We operate internationally and are subject to exchange rate fluctuations, exchange controls, political risks and other risks relating to international operations.

​

Nine percent of our 2020 sales were to international customers, subjecting us to the risks of doing business on a global level. These risks include fluctuations in currency exchange rates, economic instability and disruptions, restrictions on the transfer of funds and the imposition of duties and tariffs. Additional risks from our multinational business include transportation delays and interruptions, war, terrorist activities, epidemics, pandemics, political instability, import and export controls, local regulation, changes in governmental policies, labor unrest and current and changing regulatory environments. In addition, government policies on international trade and investment such as import quotas, tariffs, and capital controls, whether adopted by individual governments or addressed by regional trade blocs, can affect the demand for our customers’ products and services. The implementation of more restrictive trade policies, such as higher tariffs or new barriers to entry, in countries in which our customers sell large quantities of products and services could negatively impact our business, results of operations and financial condition.

​

Our operating results could be negatively affected by the global laws, rules and regulations, as well as political environments in the jurisdictions in which we operate. There could be reduced demand for our products, decreases in the prices at which we can sell our products and disruptions of production or other operations. Additionally, there may be substantial capital and other costs to comply with regulations and/or increased security costs or insurance premiums, any of which could negatively impact our operating results.

​

In addition, new or revised laws or regulations may alter the environment in which we do business, including the United Kingdom's withdrawal from the European Union, which could adversely impact our financial results. For example, new legislation or regulations may result in loss of revenue for our businesses in the United Kingdom that serve customers in the European Union or increased costs to us, directly for our compliance, or indirectly to the extent suppliers increase prices of goods and services because of increased compliance costs, excise taxes or reduced availability of materials.

​

Our international operations continue to expand, exposing us to additional risks.

​

Our international presence has grown, so the risk of incurring liabilities or fines resulting from non-compliance with various U.S. or international laws and regulations has increased. For example, we are subject to the FCPA, and similar worldwide anti-bribery laws in non-U.S. jurisdictions such as the United Kingdom’s Bribery Act 2010, which generally prohibit companies and their intermediaries from corruptly paying, offering to pay, or authorizing the payment of money, a gift, or anything of value, to a foreign official or foreign political party, for purposes of obtaining or retaining business. A company can be held liable under these anti-bribery laws not just for its own direct actions, but also for the actions of its foreign subsidiaries or other third parties, such as agents or distributors. In addition, we could be held liable for actions taken by employees or third parties on behalf of a company that we acquire. If we fail to comply with the requirements under these laws and other laws we are subject to due to our international operations, we may face possible civil and/or criminal penalties, which could have a material adverse effect on our business or financial results.

22

Table of Contents

​

We may be subject to risks relating to changes in our tax rates or exposure to additional income tax liabilities.

​

We are subject to income taxes in the United States and various non-U.S. jurisdictions. Domestic and international tax liabilities are subject to the allocation of income among various tax jurisdictions. Our effective income tax rate could be affected by changes in the mix of earnings among countries with differing statutory tax rates, changes in the valuation allowance of deferred tax assets or changes in tax rates or tax laws or regulations. In particular, although the passage of the Tax Cut and Jobs Act of 2017 reduced the U.S. federal statutory tax rate to 21%, our future earnings could be negatively impacted by changes in tax legislation including changing tax rates and tax base such as limiting, phasing-out or eliminating deductions or tax credits, changing rules for earnings repatriations and changing other tax laws in the U.S. or other countries.

​

We rely on information management systems and any damage, interruption or compromise of our information management systems or data could disrupt and harm our business.

​

We rely upon information technology systems and networks, some of which are managed by third parties, to process, transmit, and store electronic information in connection with the operation of our business. Additionally, we collect and store data that is sensitive to our company. Operating these information technology systems and networks and processing and maintaining this data, in a secure manner, is critical to our business operations and strategy. Our information management systems and the data contained therein are vulnerable to damage, including interruption due to power loss, system and network failures, operator negligence and similar causes.

​

In addition, our systems and data are susceptible to security breaches, viruses, malware, and other cybersecurity attacks. Cybersecurity attacks are increasing in frequency and sophistication. Cybersecurity attacks may range from random attempts to coordinated and targeted attacks, including sophisticated computer crime and advanced threats. These threats pose a risk to the security of our information technology systems and networks and the confidentiality, availability and integrity of our data. We have experienced cybersecurity events such as viruses and attacks on our IT systems. To date, none of these events has had a material impact on our or our subsidiaries’ operations or financial results. However, future threats could, among other things, cause harm to our business and our reputation; disrupt our operations; expose us to potential liability, regulatory actions and loss of business; and impact our results of operations materially. Our insurance coverage may not be adequate to cover all the costs related to cybersecurity attacks or disruptions resulting from such events.

​

Given the unpredictability of the timing, nature and scope of cybersecurity attacks or potential disruptions, we could potentially be subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromising, misappropriation, destruction or corruption of data, security breaches, other manipulation or improper use of our systems or networks, financial losses from remedial actions, loss of business or potential liability, and/or damage to our reputation, any of which could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition. Any significant compromise of our information management systems or data could impede or interrupt our business operations and may result in negative consequences including loss of revenue, fines, penalties, litigation, reputational damage, inability to accurately and/or timely complete required filings with government entities including the SEC and the Internal Revenue Service, unavailability or disclosure of confidential information (including personal information) and negative impact on our stock price.

​

Data privacy and information security may require significant resources and present certain risks.

​

We collect, store, have access to and otherwise process certain confidential or sensitive data, including proprietary business information, personal data or other information that is subject to privacy and security laws, regulations and/or customer-imposed controls. Despite our efforts to protect such data, we cannot guarantee protection from all material security breaches, theft, misplaced or lost data, programming errors, or employee errors that could potentially lead to the compromise of such data, improper use of our systems, software solutions or networks, unauthorized access, use, disclosure, modification or destruction of information, defective products, production downtimes and operational disruptions, any of which could result in costly litigation and liability or reputational harm. Furthermore, we may be

23

Table of Contents

required to expend significant attention and financial resources to protect against physical or cybersecurity breaches that could result in the misappropriation of our information or the information of our employees and customers.

​

Our enterprise data practices, including the collection, use, sharing, and security of the personal identifiable information of our customers, employees, or suppliers are subject to increasingly complex, restrictive, and punitive regulations in all key market regions. 

​

Under these regulations, the failure to maintain compliant data practices could result in consumer complaints and regulatory inquiry, resulting in civil or criminal penalties, as well as brand impact or other harm to our business. In addition, increased consumer sensitivity to real or perceived failures in maintaining acceptable data practices could damage our reputation and deter current and potential users or customers from using our products and services. Because many of these laws are new, there is little clarity as to their interpretation, as well as a lack of precedent for the scope of enforcement. The cost of compliance with these laws and regulations will be high and is likely to increase in the future. For example, in Europe, the General Data Protection Regulation came into effect on May 25, 2018, and applies to all of our ongoing operations in the EU as well as some of our operations outside of the EU that involve the processing of EU personal data. This regulation significantly increases the potential financial penalties for noncompliance, including fines of up to 4% of worldwide revenue. Similar regulations are coming into effect in Brazil and China. Other foreign, state and local jurisdictions have adopted and are considering adopting, laws and regulations imposing obligations regarding personal data. In some cases, these laws provide a private right of action that would allow customers to bring suit directly against us for mishandling their data.

​

Our financial results may be affected by various legal and regulatory proceedings, including those involving antitrust, tax, environmental, or other matters.

​

We are subject to a variety of litigation and legal compliance risks. These risks include, among other things, possible liability relating to product liability, personal injuries, intellectual property rights, contract-related claims, government contracts, taxes, environmental matters and compliance with U.S. and foreign laws, including competition laws and laws governing improper business practices. We or one of our subsidiaries could be charged with wrongdoing as a result of such matters. If convicted or found liable, we could be subject to significant fines, penalties, repayments, or other damages (in certain cases, treble damages). As a global business, we are subject to complex laws and regulations in the U.S. and other countries in which we operate. Those laws and regulations may be interpreted in different ways. They may also change from time to time and so may their related interpretations. Changes in laws or regulations could result in higher expenses and payments, and uncertainty relating to laws or regulations may also affect how we conduct our operations and structure our investments and could limit our ability to enforce our rights.

​

The volatility of the stock market could result in a material impairment of goodwill or indefinite-lived intangible assets.

​

We review the recoverability of goodwill and indefinite-lived intangible assets annually or whenever significant events or changes in circumstances occur that might impair the recovery of recorded costs. Factors that may be considered a change in circumstances, indicating that the carrying value of our goodwill or indefinite-lived intangible assets may not be recoverable, include a decline in stock price and market capitalization, declines in the market conditions of our products, viability of end markets (such as the energy (oil and natural gas) market in which we recognized $137.5 million of impairment and restructuring charges in the first quarter of 2020 due to our reduced long-term outlook for our energy-related businesses - see discussion of our 2020 and 2018 impairment charges in Note 19 — “Impairment and Restructuring Charges” of Part II, Item 8 “Financial Statements and Supplementary Data”), loss of customers, reduced future cash flow estimates, and slower growth rates in our industry. If prices for the products our customers sell fall substantially or remain low for a sustained period, we may be (i) unable to realize a profit from businesses that service such customers, (ii) required to record additional impairments, or (iii) required to suspend or reorganize operations that service such customers. An impairment charge, if incurred, could be material.

​

24

Table of Contents

Our business operations and financial performance could be adversely affected by changes in our relationship with our employees or changes to U.S. or foreign employment regulations.

​

We had approximately 12,800 employees worldwide as of December 31, 2020. This means we have a significant exposure to changes in domestic and foreign laws governing our relationships with our employees, including wage and hour laws and regulations, fair labor standards, minimum wage requirements, overtime pay, unemployment tax rates, workers’ compensation rates, citizenship requirements and payroll taxes, which likely would have a direct impact on our operating costs. A significant increase in minimum wage or overtime rates in jurisdictions where we have employees could have a significant impact on our operating costs and may require that we relocate those operations or take other steps to mitigate such increases, all of which may cause us to incur additional costs, expend resources responding to such increases and lower our profitability.

​

We face certain risks associated with potential labor disruptions.

​

Approximately 12% of our employees are covered by collective bargaining agreements and/or are represented by unions or workers’ councils. Approximately 700 employees are covered by 25 different collective bargaining agreements that expire in 2021. While we believe that our relations with our employees are generally good, we cannot provide assurances that we will be completely free of labor disruptions such as work stoppages, work slowdowns, union organizing campaigns, strikes, lockouts or that any existing labor disruption will be favorably resolved. We could incur additional costs and/or experience work stoppages that could adversely affect our business operations through a loss of revenue and strained relationships with customers.

​

Risks Related to our Indebtedness

​

Our indebtedness could impair our financial condition or cause a downgrade of our credit rating and reduce the funds available to us for other purposes and our failure to comply with the covenants contained in our debt instruments could result in an event of default that could adversely affect our operating results.

​

We have substantial debt service obligations. As of December 31, 2020, we had aggregate outstanding indebtedness of approximately $1.66 billion. This indebtedness could adversely affect us in the following ways:

​

​

​

​

​

Our existing debt agreements contain financial and restrictive covenants that limit the total amount of debt that we may incur, and may limit our ability to engage in other activities that we may believe are in our long-term best interests. Our failure to comply with these covenants may result in an event of default, which, if not cured or waived, could accelerate the maturity of our indebtedness or prevent us from accessing additional funds under our revolving credit facility. If the maturity of our indebtedness is accelerated, we may not have sufficient cash resources to satisfy our debt obligations and we may not be able to continue our operations as planned. See discussion regarding our financial covenants in the “Liquidity and Capital Resources” section of Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

​

25

Table of Contents

We may not be able to generate sufficient cash flow to meet our existing debt service obligations.

​

Our ability to generate sufficient cash flow from operations, draw on our revolving credit facility or access the capital markets to make scheduled payments on our debt obligations will depend on our future financial performance, which will be affected by a range of economic, competitive and business factors, many of which are outside of our control. For example, we may not generate sufficient cash flow from our operations to repay amounts due on our debt securities when they mature in 2023, 2025, 2030 and 2036. If we do not generate sufficient cash flow from operations or have availability to borrow on our revolving credit facility to satisfy our debt obligations, we would expect to undertake alternative financing plans, such as refinancing or restructuring our debt, selling assets, reducing or delaying capital investments or seeking to raise additional capital. We may not be able to consummate any such transactions at all or on a timely basis or on terms, and for proceeds, that are acceptable to us. These transactions may not be permitted under the terms of our various debt instruments then in effect. Our inability to generate sufficient cash flow to satisfy our debt obligations or to timely refinance our obligations on acceptable terms could adversely affect our ability to serve our customers or we may not be able to continue our operations as planned.

​

Changes in the Company’s credit ratings could increase cost of funding.

​

Our credit ratings are important to our cost of capital. The major rating agencies routinely evaluate our credit profile and assign debt ratings to Reliance. This evaluation is based on a number of factors, which include financial strength, business and financial risk, as well as transparency with rating agencies and timeliness of financial reporting. Any downgrade in our credit rating could increase our cost of capital and have a material adverse effect on our business, financial condition, results of operations or cash flows.

​

We are permitted to incur more debt, which may intensify the risks associated with our current leverage, including the risk that we will be unable to service our debt or that our credit rating may be downgraded.

​

We may incur substantial additional indebtedness in the future. Although the terms governing our indebtedness contain restrictions on our ability to incur additional indebtedness, these restrictions are subject to numerous qualifications and exceptions, and the indebtedness we may incur in compliance with these restrictions could be substantial. If we incur additional debt, the risks associated with our leverage, including the risk that we will be unable to service our debt or that we may be subject to a credit rating downgrade, may increase.

​

Our acquisition strategy and growth capital expenditures may require access to external capital, and limitations on our access to external financing sources could impair our ability to grow.

​

We may have to rely on external financing sources, including commercial borrowings and issuances of debt and equity securities, to fund our acquisitions and growth capital expenditures. Limitations on our access to external financing sources, whether due to tightened capital markets, more expensive capital or otherwise, could impair our ability to execute our growth strategy.

​

Because all of our available borrowing capacity on our revolving credit facility bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, if we increase our leverage in the future we are vulnerable to changes in interest rate increases.

​

The available borrowing on our revolving credit facility bears interest at rates that fluctuate with changes in certain short-term prevailing interest rates, primarily based on the London Interbank Offered Rate for deposits of U.S. dollars (“LIBOR”). LIBOR tends to fluctuate based on general interest rates, rates set by the Federal Reserve and other central banks, the supply of and demand for credit in the London interbank market and general economic conditions. As of December 31, 2020, we had $1.46 billion available for borrowing on our revolving credit facility with interest on borrowings at variable rates based on LIBOR. We currently do not use derivative financial instruments to manage the potential impact of interest rate risk. Accordingly, our interest expense for any particular period will fluctuate based on LIBOR and other variable interest rates if we borrow on our revolving credit facility.

​

On July 27, 2017, the Financial Conduct Authority (the authority that regulates LIBOR) announced that it intends to stop compelling banks to submit rates for the calculation of LIBOR. On November 30, 2020, ICE Benchmark Administration, the administrator of USD LIBOR announced that it intended to consult on ceasing publication of one-week and two-month USD LIBOR by December 31, 2021 and does not intend to cease publication of the remaining USD

26

Table of Contents

LIBOR tenors until June 30, 2023, providing additional time for existing contracts that are dependent on LIBOR to mature. Financial industry working groups are developing replacement rates and methodologies to transition existing agreements that depend on LIBOR as a reference rate; however, we can provide no assurance that market-accepted rates and transition methodologies will be available and finalized at the time of LIBOR cessation. If clear market standards and transition methodologies have not developed by the time LIBOR becomes unavailable, we may have difficulty reaching agreement on acceptable replacement rates under our revolving credit facility. If we are unable to negotiate replacement rates on favorable terms, it could have a material adverse effect on our earnings and cash flows.

​

Item 1B.  Unresolved Staff Comments

​

None.

​

Item 2.  Properties

​

As of December 31, 2020, we operated approximately 300 metals service center processing and distribution facilities in 40 states in the U.S. and in 13 other countries, and our corporate headquarters. In the opinion of management, all of our service center facilities are in good or excellent condition and are adequate for our existing operations. These facilities currently operate at about 50-60% of capacity based upon a 24-hour seven-day week, with each location averaging approximately two shifts operating at full capacity for a five-day work week. We have the ability to increase our operating capacity significantly without further investment in facilities or equipment if demand levels increase.

​

We leased 83 of the approximately 300 processing and distribution facilities that we maintained as of December 31, 2020. In addition, we have ground leases and other leased spaces, such as depots, sales offices and storage, totaling 5.6 million square feet. Total square footage on all company-owned properties is approximately 29.3 million and represents approximately 84% of the total square footage of our operating facilities. In addition, we lease our corporate headquarters in Los Angeles, California. Our leases of facilities and other spaces expire at various times through 2045 and our ground leases expire at various times through 2068. The aggregate monthly rent amount for these properties is approximately $2.4 million.

​

Item 3.  Legal Proceedings

​

The information contained under the captions “Legal Matters” and “Environmental Contingencies” in Note 16 — “Commitments and Contingencies” of Part II, Item 8 “Financial Statements and Supplementary Data” is incorporated by reference herein.

​

Item 4.  Mine Safety Disclosures

​

Not applicable.

​

PART II

​

Item 5.  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

​

Our common stock is owned by 173 stockholders of record as of February 19, 2021. Our common stock has traded for the past 27 years on the NYSE under the symbol “RS” and was first traded September 16, 1994. Our stockholders of record exclude those stockholders whose shares were held for them in street name through banks, brokers or other nominee accounts.

​

We have paid quarterly cash dividends on our common stock for 61 consecutive years and have never reduced or suspended our regular quarterly dividend. In February 2021, our Board of Directors increased the regular quarterly dividend amount 10.0% to $0.6875 per share. This recent increase is the 28^th increase in our dividend since our IPO in 1994. Further increases in the quarterly dividend rate will be evaluated by the Board based on conditions then existing, including our earnings, cash flows, financial condition and capital requirements, or other factors the Board may deem relevant. We expect to continue to declare and pay dividends in the future, if earnings are available to pay dividends, but we also intend to continue to retain a portion of earnings for reinvestment in our operations and expansion of our businesses. We cannot assure you that any dividends will be paid in the future or that, if paid, the dividends will be at the same amount

27

Table of Contents

or frequency as paid in the past. Our payment of dividends in the future will depend on business conditions, our financial condition, earnings, liquidity and capital requirements and other factors.

​

On October 23, 2018, our Board of Directors amended our share repurchase plan increasing by 5,000,000 shares the total number of shares authorized to be repurchased and extending the duration of the program through December 31, 2021. Our share repurchase plan does not obligate us to acquire any specific number of shares. Under the share repurchase plan, shares may be repurchased in the open market under plans complying with Rule 10b5-1 or 10b-18 under the Securities Exchange Act of 1934, as amended, or privately negotiated transactions. During the year ended December 31, 2020, we repurchased 3,674,004 shares at an average cost of $91.80 per share, or $337.3 million in total. As of December 31, 2020, we had remaining authorization to purchase an additional 2,759,817 shares.

​

Our share repurchase activity during the three months ended December 31, 2020 was as follows:

​

​

Additional information regarding securities authorized for issuance under all stock-based compensation plans will be included under the caption “EXECUTIVE COMPENSATION — Equity Compensation Plan Information” in our definitive Proxy Statement for the 2021 annual meeting of stockholders to be held on May 19, 2021.

​

Stock Performance Graph

​

This graph is not deemed to be “filed” with the U.S. Securities and Exchange Commission (SEC) or subject to the liabilities of Section 18 of the Securities Exchange Act of 1934 (the Exchange Act), and should not be deemed to be incorporated by reference into any of our prior or subsequent filings under the Securities Act of 1933 or the Exchange Act.

​

The following graph compares the performance of our common stock with that of the S&P 500, the Russell 2000 and an industry peer group consisting of publicly-traded metals service center companies (the “industry peer group”) for the five-year period from December 31, 2015 through December 31, 2020. The graph assumes, in each case, that an initial investment of $100 is made at the beginning of the five-year period. The cumulative total return reflects market prices at the end of each year and the reinvestment of dividends. Since there is no nationally-recognized industry index consisting of metals service center companies to be used as a peer group index, Reliance constructed the industry peer group. As of December 31, 2020, the industry peer group consisted of Olympic Steel Inc., which has securities listed for trading on NASDAQ; Ryerson Holding Corporation and Worthington Industries, Inc., each of which has securities listed for trading on the NYSE; and Russel Metals Inc., which has securities listed for trading on the Toronto Stock Exchange. The returns of each member of the industry peer group are weighted according to that member’s stock market capitalization.

28

Table of Contents

The stock price performance shown on the graph below is not necessarily indicative of future price performance.

Comparison of 5 Year Cumulative Total Return Among Reliance Steel & Aluminum Co.,
the S&P 500 Index, the Russell 2000 Index and an Industry Peer Group

Copyright© 2021 Standard & Poor's, a division of S&P Global. All rights reserved.
Copyright© 2021 Russell Investment Group. All rights reserved.

​

​

​

29

Table of Contents

Item 6.  Selected Financial Data

​

We have derived the following selected consolidated financial data for each of the five years ended December 31, 2020 from our audited consolidated financial statements. The information below should be read in conjunction with Part II, Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes thereto included in Part II, Item 8 “Financial Statements and Supplementary Data.”

​

SELECTED CONSOLIDATED FINANCIAL DATA

​