UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2020

or

For the transition period from  _________  to _________

Commission file number: 001-12933

(Exact name of registrant as specified in its charter)

+46 8 587 20 600

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes  ☒   No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐   No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports); and (2) has been subject to such filing requirements for the past 90 days.    Yes:  ☒   No:   ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes:   ☒   No:   ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262 (b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes:  ☐   No:  ☒

The aggregate market value of the voting and non-voting common equity of Autoliv, Inc. held by non-affiliates as of the last business day of the second fiscal quarter of 2020 amounted to $5,634 million.

Number of shares of Common Stock outstanding as of February 10, 2021: 87,362,501.

AUTOLIV, INC.

Index

1

NOTE ABOUT FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains statements that are not historical facts but rather forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements include those that address activities, events or developments that Autoliv, Inc. (“Autoliv,” the “Company” or “we”) or its management believes or anticipates may occur in the future. All forward-looking statements are based upon our current expectations, various assumptions and/or data available from third parties. Our expectations and assumptions are expressed in good faith and we believe there is a reasonable basis for them. However, there can be no assurance that such forward-looking statements will materialize or prove to be correct as forward-looking statements are inherently subject to known and unknown risks, uncertainties and other factors which may cause actual future results, performance or achievements to differ materially from the future results, performance or achievements expressed in or implied by such forward-looking statements.

In some cases, you can identify these statements by forward-looking words such as “estimates,” “expects,” “anticipates,” “projects,” “plans,” “intends,” “believes,” “may,” “likely,” “might,” “would,” “should,” “could,” or the negative of these terms and other comparable terminology, although not all forward-looking statements contain such words.

Because these forward-looking statements involve risks and uncertainties, the outcome could differ materially from those set out in the forward-looking statements for a variety of reasons, including without limitation: changes in light vehicle production; fluctuation in vehicle production schedules for which the Company is a supplier; changes in general industry and market conditions or regional growth or decline; changes in and the successful execution of our capacity alignment: restructuring and cost reduction and efficiency initiatives and the market reaction thereto; loss of business from increased competition; higher raw material, fuel and energy costs; changes in consumer and customer preferences for end products; customer losses; changes in regulatory conditions; customer bankruptcies; consolidations or restructuring; or divestiture of customer brands; unfavorable fluctuations in currencies or interest rates among the various jurisdictions in which we operate; component shortages; market acceptance of our new products; costs or difficulties related to the integration of any new or acquired businesses and technologies; continued uncertainty in pricing negotiations with customers; successful integration of acquisitions and operations of joint ventures; successful implementation of strategic partnerships and collaborations; our ability to be awarded new business; product liability, warranty and recall claims and investigations and other litigation and customer reactions thereto; higher expenses for our pension and other postretirement benefits, including higher funding needs for our pension plans; work stoppages or other labor issues; possible adverse results of pending or future litigation or infringement claims; our ability to protect our intellectual property rights; negative impacts of antitrust investigations or other governmental investigations and associated litigation relating to the conduct of our business; tax assessments by governmental authorities and changes in our effective tax rate; dependence on key personnel; legislative or regulatory changes impacting or limiting our business; political conditions; dependence on and relationships with customers and suppliers; and other risks and uncertainties identified in Item 1A -“Risk Factors” and Item 7 - “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Form 10-K.

For any forward-looking statements contained in this or any other document, we claim the protection of the safe harbor for forward- looking statements contained in the Private Securities Litigation Reform Act of 1995, and we assume no obligation to update publicly or revise any forward-looking statements in light of new information or future events, except as required by law.

2

PART I

Item 1. Business

General

Autoliv, Inc. (“Autoliv”, the “Company” or “we”) is a Delaware corporation with its principal executive offices in Stockholm, Sweden. The Company functions as a holding corporation and owns two principal subsidiaries, Autoliv AB and Autoliv ASP, Inc. Our fiscal year ends on December 31.

Business

Autoliv is a leading developer, manufacturer and supplier of safety systems to the automotive industry with a broad range of product offerings, primarily passive safety systems.

Passive safety systems are primarily meant to improve vehicle safety. Passive safety systems include modules and components for frontal-impact airbag protection systems, side-impact airbag protection systems, seatbelts, steering wheels, inflator technologies, battery cable cutters and protection systems for vulnerable road users such as pedestrians and cyclists.

Including joint venture operations, Autoliv has approximately 65 production facilities in 25 countries and its customers include the world’s largest car manufacturers. Autoliv’s sales in 2020 were $7.4 billion, approximately 65% of which consisted of airbag and steering wheel products and approximately 35% of which consisted of seatbelt products. Our business is conducted in the following geographical regions: Europe, the Americas, China, Japan and the Rest of Asia (ROA).

Autoliv’s head office is located in Stockholm, Sweden, where we currently employ approximately 70 people. At December 31, 2020, Autoliv had approximately 61,000 employees worldwide, and a total headcount of approximately 68,000, which includes 7,000 temporary personnel.

Additional information required by this Item 1 regarding developments in the Company’s business during 2020 is contained under Item 7 in this Annual Report.

Reportable Segment

Upon completion of the spin-off of its former Electronics segment on June 29, 2018, Autoliv concluded that it has one reportable segment based on the way the Company evaluates its financial performance and manages its operations. Autoliv’s remaining business is comprised of passive safety products - principally airbags (including steering wheels and inflators) and seatbelts. For more information regarding the Company’s segment reporting, see Note 1 to the Consolidated Financial Statements in this Annual Report.

Products, Market and Competition

Products

Saving more lives on the road is a key health priority as our world population grows and develops. However, population expansion in growth markets and the rise of megacities creates new complexities. To meet this challenge, we develop automotive safety solutions that work in real life situations.

Our safety systems such as seatbelts and airbags substantially mitigate human consequences of traffic accidents.

The airbag module is designed to inflate extremely rapidly then quickly deflate during a collision or impact. It consists of the container, airbag cushion and an inflator. The purpose of the airbag is to provide the occupants a cushioning and restraint during a crash event to prevent any impact or impact-caused injuries between the occupant and the interior of the vehicle.

Seatbelts can reduce the overall risk of serious injuries in frontal crashes by as much as 60% due to advanced seatbelt technologies such as pretensioners and load limiters.

Autoliv also manufactures steering wheels that are crafted to ensure they meet safety requirements and are functional as well as stylish.

Market and Competition

Consumer research clearly shows that consumers want safe vehicles, and several significant trends are likely to have a positive influence on overall safety content per vehicle. These include:

3

The automotive safety market is driven by two primary factors: light vehicle production (LVP) and content per vehicle (CPV).

The first growth driver, LVP, has increased at an average annual growth rate of around 1.3% since the start of Autoliv in 1997 despite the substantial drop in LVP in 2020 due to the COVID-19 pandemic. LVP is forecasted to grow to close to 88 million by 2023 from approximately 72 million in 2020, as the market is expected to recover from the effects of the COVID-19 pandemic, according to IHS Markit.

Unlike LVP, where Autoliv can only aim to be on the best-selling platforms, Autoliv can influence CPV more directly by continuously developing and introducing new technologies with higher value-added features. Over the long term, this increases average safety CPV and has caused our markets to grow faster than the LVP.

Since 1997, the Company’s sales compound annual growth rate (CAGR) for passive safety has been 4.4% compared to the market rate of around 1.9% which includes an LVP growth of around 1.3%. Our outperformance is a result of a steady flow of new passive safety technologies, strong focus on quality and a superior global footprint both in products and engineering. This has enabled Autoliv to increase its market share from 27% in 1997 to 42% in 2020.

In the Developed Markets (Western Europe, North America, Japan and South Korea) the CPV is around $300. CPV growth in these regions will mainly come from new safety systems such as active seatbelts, knee airbags and front-center airbags along with improved protection for pedestrians and rear-seat occupants like bag-in-belt or more advanced seatbelts.

In our Growth Markets (all markets other than the Developed Markets), we see great opportunities for CPV growth from more airbags and advanced seatbelt products. Average CPV in our Growth Markets is around $190, approximately $110 less than in the Developed Markets.

As a result of higher installation rates of airbags, more advanced seatbelt products and more complex steering wheels, CPV is expected to increase at a similar pace in both Developed and Growth markets over the next 3-4 years. LVP in Growth Markets is expected to increase faster than in the Developed Markets during the same period. Despite a negative LVP mix effect from higher growth in low CPV markets, the annual passive safety market (seatbelts and airbags, including steering wheels), is expected to grow from around $17 billion in 2020 to more than $23 billion over the next 3-4 years, based on the current macro-economic outlook and our internal market intelligence and estimates. The highest growth rate is expected in steering wheels, where Autoliv has a global market share of around 37%, generated by the trend toward higher-value steering wheels with leather and additional features.

In seatbelts, Autoliv has reached a global market share of around 44%, primarily due to being the technology leader with several important innovations such as pretensioners and active seatbelts. Our strong market position is also a reflection of our superior global footprint. Seatbelts are the primary life-saving safety product and are also an important requirement in low-end vehicles for the Growth Markets. This provides us with an excellent opportunity to benefit from the expected growth in this segment of the market.

The market for airbags, where Autoliv has a market share of around 42%, is expected to grow mainly as result of higher installation rates of inflatable curtains, side airbags and knee airbags. Additionally, the new front center airbag is expected to start to contribute to the market growth.

Our competitors

Autoliv is the clear market leader in passive safety with an estimated global market share of 42%.

ZF, our largest competitor, is a global leader in driveline and chassis technology as well as in passive safety technologies, and is one of the largest global automotive suppliers.

Our second largest competitor is U.S.-based Joyson Safety Systems (JSS). JSS is a Chinese owned company and is the result of the merger between Key Safety Systems (KSS) and Takata Corporation after KSS acquired Takata in 2018.

In Japan, Brazil, South Korea and China there are a number of local suppliers that have close ties with the domestic vehicle manufacturers. For example, Toyota uses “keiretsu” (in-house) suppliers Tokai Rika for seatbelts and Toyoda Gosei for airbags and steering wheels. These suppliers generally receive most of the Toyota business in Japan, in the same way, Mobis, a major supplier to Hyundai/Kia in South Korea, generally receives a significant part of their business.

Other competitors include Nihon Plast and Ashimori of Japan, Jinheng of China, Samsong in South Korea and Chris Cintos de Seguranca in South America. Collectively, these competitors account for the majority of the remaining market share in passive safety.

Additional information concerning our products, markets and competition is included in the “Risks and Risk Management” section under Item 7 of this Annual Report.

4

Manufacturing and Production

See “Item 2. Properties” for a description of Autoliv’s principal properties. The component factories manufacture inflators, propellant, initiators, textile cushions, webbing, pressed steel parts, springs and overmoulded steel parts used in seatbelt and airbag assembly and steering wheels. The assembly factories source components from a number of parties, including Autoliv’s own component factories, and assemble complete restraint systems for “just-in-time” delivery to customers. The products manufactured by Autoliv’s consolidated subsidiaries in 2020 consisted of approximately 126 million complete seatbelt systems (of which approximately 80 million were fitted with pretensioners), approximately 87 million side airbags (including curtain airbags and front center airbags), approximately 49 million frontal airbags, approximately 0.5 million other airbags and approximately 17 million steering wheels.

Autoliv’s “just-in-time” delivery system is designed to accommodate the specific requirements of each customer for low levels of inventory and rapid stock delivery service. “Just-in-time” deliveries require final assembly or, at least, distribution centers in geographic areas close to customers to facilitate rapid delivery. The fact that the major automobile manufacturers are continually expanding their production activities into more countries and require the same or similar safety systems as those produced in Europe, Japan or the U.S. increases the importance for suppliers to have assembly capacity in several countries. Consolidation among our customers also supports this trend.

Autoliv’s assembly operations generally are not constrained by capacity considerations unless there is a disruption in the supply of raw materials and components. When dramatic shifts in LVP occur, Autoliv can generally adjust capacity in response to any changes in demand within a few days by adding or removing work shifts and within a few months by adding or removing standardized production and assembly lines. Most of Autoliv’s assembly factories can make sufficient space available to accommodate additional production lines to satisfy foreseeable increases in capacity. As a result, Autoliv can usually adjust its manufacturing capacity faster than its customers can adjust their capacity as a result of fluctuations in the general demand for vehicles or in the demand for a specific vehicle model, provided that customers promptly notify Autoliv when they become aware of such changes in demand.

When dramatic shifts in LVP occur or when there is a shift in regional LVP, the capacity adjustments can take more time and be more costly. Additionally, when there is significant demand for a given product due to a major recall of a competitor’s product, like certain of our customers have experienced, capacity adjustments may take time.

We could experience disruption in our supply or delivery chain, which could cause one or more of our customers to halt or delay production. For more information, see Item 1A – “Risk Factors” in this Annual Report.

Quality Management

Autoliv believes that superior quality is a prerequisite to being considered a leading global supplier of automotive safety systems and is key to our financial performance, because quality excellence is critical for winning new orders, preventing recalls and maintaining low scrap rates. Autoliv has for many years emphasized a “zero-defect” proactive quality policy and continues to strive to improve its working methods. This means that Autoliv’s products are expected to always meet performance expectations and be delivered to its customers at the right times and in the right amounts. Furthermore, we believe our continued quality improvements further enhance our reputation among our customers, employees and governmental authorities.

Although quality has always been paramount in the automotive industry, especially for safety products, automobile manufacturers have become increasingly focused on quality with even less tolerance for any deviations. This intensified focus on quality is partially due to an increase in the number of vehicle recalls for a variety of reasons (not just safety), including a few high-profile vehicle recalls. This trend is likely to continue as automobile manufacturers introduce even stricter quality requirements and regulating agencies and other authorities increase the level of scrutiny given to vehicle safety issues. We have not been immune to the recalls that have been impacting the automotive industry.

We continue to drive our quality initiative called “Q5” which was initiated in the summer of 2010. It is an integral part of our strategy of shaping a proactive quality culture of zero defects. It is called “Q5” because it addresses quality in five dimensions: products, customers, growth, behavior and suppliers. The goal of Q5 is to firmly tie together quality with value within all of our processes and for all of our employees, thereby leading to the best value for our customers. Since 2010, we have continually expanded this quality initiative to provide additional skills training to more employees and suppliers. These activities have significantly improved our quality performance.

In our pursuit of excellence in quality, we have developed a chain of four “defense lines” against potential quality issues. These defense lines consist of: 1) robust product designs, 2) flawless components from suppliers and our own in-house component companies, 3) manufacturing flawless products with a system for verifying that our products conform with specifications and 4) an advanced traceability system in the event of a recall.

Our pursuit of quality excellence extends from the earliest phases of product development to the proper disposal of a product following many years of use in a vehicle. Autoliv’s comprehensive Autoliv Product Development System includes several key check points during the process of developing new products that are designed to ensure that such products are well-built and have no hidden defects. Through this process, we work closely with our suppliers and customers to set clear standards that help to ensure robust component design and lowest cost for function in order to proactively prevent problems and ensure we deliver only the best designs to the market.

The Autoliv Production System (“APS”), based on the goals of improving quality and efficiency, is at the core of Autoliv’s manufacturing philosophy. APS integrates essential quality elements, such as mistake proofing, statistical process control and operator involvement, into the manufacturing processes so all Autoliv associates are aware of and understand the critical connection between themselves and our lifesaving products. This “zero-defect” principle extends beyond Autoliv to the entire supplier base. All of our suppliers must accept the strict quality standards in the global Autoliv Supplier Manual, which defines our quality requirements and focuses on preventing bad parts from being produced by our suppliers and helps eliminate defective intermediate products in our assembly lines as early as possible. In

5

addition, Autoliv’s One Product One Process (“1P1P”) initiative is our strategy for developing and managing standardization of both core products and customer-specific features, leading not only to improved quality, but also greater cost efficiency and more efficient supply chain management.

IATF 16949:2016 is one of the automotive industry’s most widely used international standards for quality management. All of our facilities that ship products to OEMs are regularly certified according to the International Automotive Task Force (IATF) standards.

Environmental and Safety Regulations

For information on how environmental and safety regulations impact our business, see “Risk Factors – ‘Our business may be adversely affected by laws or regulations, including environmental, occupational health and safety or other governmental regulations’ and ‘Our business may be adversely affected by changes in automotive safety regulations or concerns that drive further regulation of the automobile safety market’” in Item 1A and “Risks and Risk Management” in Item 7 of this Annual Report.

Raw Materials

Approximately 50% of our sales comes from direct material purchased from external suppliers. Autoliv mainly purchases manufactured components and raw materials for its operations. We take several actions to mitigate raw material fluctuations, such as competitive sourcing and looking for alternative materials.

For information on the sources and availability of raw materials, see “Risk Factors – ‘Changes in the source, cost, availability of and regulations pertaining to raw materials and components may adversely affect our profit margins’” in Item 1A of this Annual Report.

Intellectual Property

We have developed a considerable amount of proprietary technology related to automotive safety systems and rely on many patents to protect such technology. Our intellectual property plays an important role in maintaining our competitive position in a number of the markets we serve. For information on our use of intellectual property and its importance to us, see “Risk Factors – ‘If our patents are declared invalid or our technology infringes on the proprietary rights of others, our ability to compete may be impaired’” in Item 1A of this Annual Report.

Backlog

Autoliv has frame contracts with automobile manufacturers and such contracts are typically entered into up to three years before the start of production of the relevant car model or platform and provide for a term covering the life of such car model or platform including service parts after a vehicle model is no longer produced. However, typically these contracts do not provide minimum quantities, firm prices or exclusivity but instead permit the automobile manufacturer to resource the relevant products at given intervals (or at any time) from other suppliers.

Dependence on Customers

In 2020, our top five customers represented around 53% of our annual sales and our top ten customers represented around 81% of our annual sales. This reflects the concentration of manufacturers in the automotive industry. The five largest OEMs in 2020 accounted for around 51% of global LVP and the ten largest OEMs accounted for around 75% of global LVP. A delivery contract is typically for the lifetime of a vehicle model, which is normally between five and seven years depending on customer platform sourcing preferences and strategies.

Customer sales trends

Asian vehicle producers have steadily become more important to Autoliv, and now represent around 47% of our global sales compared to 40% five years ago. The largest increase comes from Japanese OEMs that represented 26% of our global sales five years ago but now accounts for 34% of our global sales in 2020. This is a result of our stronger market position based on our local presence in Japan. European based brands accounted for 31% of our global sales in 2020. The U.S. based OEMs (including Tesla and Chrysler) accounted

6

for 21% of our global sales. The local Chinese OEMs as a group accounted for around 4% of our global sales in 2020, with Great Wall representing 2%. The fastest growing customer from 2019 to 2020 was Tesla, followed by General Motors.

For information on our dependence on customers, see “Risk Factors – ‘Our business could be materially and adversely affected if we lost any of our largest customers or if they were unable to pay their invoices’” in Item 1A of this Annual Report and “Dependence on Customers” under the section “Risks and Risk Management” in Item 7 of this Annual Report and Note 21 to the Consolidated Financial Statements.

Research, Development and Engineering, net (R,D&E)

No single customer project accounted for more than 5.5% of Autoliv’s total R,D&E, net spending during 2020. To fuel Autoliv’s product portfolio, additional expertise is brought in-house via technology partnerships and licensing agreements.

During 2020, gross expenditures for Research, Development and Application Engineering (R,D&E) amounted to $557 million compared to $605 million in 2019. Of these amounts, $181 million in 2020 and $199 million in 2019 were related to customer-funded engineering projects and crash tests. Net of this income, R,D&E expenditures decreased in 2020 compared to 2019 by 7.4% to 375 million. Of the R,D&E, net expense in 2020, 82% was for projects and programs for which we have customer orders, typically related to vehicle models in development. The remaining 18% was not only for completely new innovations but also for improvements of existing products, standardization and cost reduction projects that will yield greater benefits over time.

Regulatory Costs

The fitting of seatbelts in most types of motor vehicles is mandatory in almost all countries and many countries have strict laws regarding the use of seatbelts while in vehicles. In addition, most developed countries require that seats in intercity buses and commercial vehicles be fitted with seatbelts. In the U.S., federal legislation requires frontal airbags on the driver-side and the passenger-side of all new passenger cars since 1998 and in all sport utility vehicles, pickup trucks, and vans since 1999.

For information concerning the material effects on our business relating to our compliance with government safety regulations, see “Risk Factors – ‘Our business may be adversely affected by laws or regulations, including environmental, occupational health and safety or other governmental regulations’ and ‘Our business may be adversely affected by changes in automotive safety regulations or concerns that drive further regulation of the automobile safety market’” in Item 1A of this Annual Report and in Item 7 under the section “Risks and Risk Management” of this Annual Report.

Human Resources

Our drive for excellence is what makes us the world’s leading supplier of automotive safety systems. From the earliest stages of product development to sales and design to the final delivery of the finished product our employees are driven by our passion to save more lives.

The successful execution of our strategies relies on our ability to shape a quality and performance-oriented culture, and to adapt quickly to sudden shifts in our circumstances, as illustrated by the COVID-19 crisis. A turbulent external environment presents many challenges but also opportunities. As we move forward we strive to respond with agility to new possibilities to grow and improve our business whilst delivering with excellence to our customers. We build a winning team by focusing on creating a work environment that attracts, retains, and engages our employees. We take great pride in working together to provide lifesaving solutions for mobility and society, and are always looking for new team members who share this passion. For additional information, see our Sustainability Report 2021 available at our corporate website at www.autoliv.com.

Development of our employees

We offer a collaborative work environment where we tackle challenges and achieve great things together. Supporting the development of our employees is essential in a highly competitive and rapidly changing environment. An important cornerstone of each employee’s growth is the ongoing dialogue between the team member and manager, which is summarized during an annual Performance and Development Dialogue (PDD). During 2020, 99% of targeted employees conducted a PDD with their managers. To provide opportunities for professional and personal growth of our employees, we have a multitude of development channels, including technical and specialist career paths, international assignments and other such programs. We promote continuous development on the job every day, and more than 1,500 employees attended at least one training program this year, despite restrictions related to COVID-19.

Health and Safety

We are committed to providing a work environment that promotes the health, safety and welfare of our employees. Each Autoliv facility implements our health and safety management system, which is supported by leadership teams. The implementation of the system is monitored through internal and external audits. During 2020 our main focus has been the health and safety of our employees during the Covid-19 pandemic.  

7

Diversity

We value diversity and different backgrounds and experiences among our employees. Our workforce reflects the diversity of the countries and cultures in which we operate. At the end of 2020, 47% of our workforce and 22% of our senior management positions were filled by women.

We have operations in 27 different countries, with 28% of our workforce located in Asia, 32% in the Americas and 40% in Europe (including Africa, Russia and Turkey).

Labor rights

We offer fair terms and conditions of employment. Our values, Code of Conduct, talent development strategies and employment policies support the principles in the United Nations Universal Declaration of Human Rights, and the International Labor Organization’s Fundamental Principles and Labor Standards.

Autoliv considers its relationship with its personnel to be good. While there have been a small number of minor labor disputes during the year, such disputes have not had a significant or lasting impact on our relationship with our employees, customer perception of our employee practices or our business results.

Major unions to which some of Autoliv’s employees belong in Europe include: IG Metall in Germany; Unite the union in the United Kingdom; Confédération Générale des Travailleurs (CGT), Confédération Française Démocratique du Travail (CFDT), Confédération Française de l’Encadrement Confédération Générale des cadres (CFE-CGC), Force Ouvrière (FO), Confédération Française des Travailleurs Chrétiens (CFTC), Solidaires, Unitaires, Démocratiques (SUD) and Conféderation Autonome du Travail (CAT) in France; Union General de Trabajadores (UGT), Union Sindical Obrera (USO), Comisiones Obereras (CCOO) and Confederacion General de Trabajadores (CGT) in Spain; IF Metall, Unionen, Sveriges Ingenjörer and Ledarna in Sweden; Industriaal- ja Metallitöötajate Ametiühingute Liit (IMTAL) in Estonia; Vasas Szakszervezeti Szövetség (Hungarian Metallworkers‘ Federation) in Hungary; Samorządny NiezaleĪny Związek Zawodowy Pracowników and Zakáadowa Organizacja Związkowa NSZZ SolidarnoĞü in Poland; Union Générale des Travailleurs Tunisiens (UGTT) and Union des travailleurs Tunisiens (UTT) in Tunisia and Türk Metal Sendikasi in Turkey.

In addition, Autoliv’s employees in other regions are represented by the following unions: Unifor in Canada; Sindicato de Jornaleros y Obreros Industriales y de la Industria Maquiladora de H.Matamoros, Tamaulipas (CTM); Sindicato Nacional de Trabajadores de la Industria Metalúrgica y Similares (CTM); Sindicato Industrial de Trabajadores de la Pequeña y Mediana Industria, Talleres, Maquiladoras, Negociaciones Mercantiles y Comercios, Similares, Anexos y Conexos del Estado de Querétaro (CTM); “Nueva Cultura Laboral” “de trabajadores de la fabricación, manufactura, ensamble de autopartes mecánicas y eléctricas y componentes de la industria Automotriz (CROC) in Mexico; Sindicato dos Metalúrgicos de Taubaté e Região in Brazil; Autoliv India Employees Association, Bangalore in India; the Korean Metal Workers Union (FKTU) in Korea; Autoliv Japan Roudou Kumiai in Japan and Federasi Perjuangan Buruh Indonesia (FPBI) in Indonesia.

In many European countries, Canada, Mexico, Brazil and Korea, wages, salaries and general working conditions are negotiated with local unions and/or are subject to centrally negotiated collective bargaining agreements. The terms of our various agreements with unions typically range between 1-3 years. Some of our subsidiaries in Europe, Canada, Mexico, Brazil and Korea must negotiate with the applicable local unions with respect to important changes in operations, working and employment conditions. Twice a year, members of the Company’s management conduct a meeting with the European Works Council (EWC) to provide employee representatives with important information about the Company and a forum for the exchange of ideas and opinions.

In many Asia Pacific countries, the central or regional governments provide guidance each year for salary adjustments or statutory minimum wage for workers.

Autoliv’s employees may join associations in accordance with local legislation and rules, although the level of unionization varies significantly throughout our operations.

Well-balanced Workforce

The table below show Autoliv’s well-balance workforce by age, group and gender in % at the end of 2020.

As of December 31, 2019, Autoliv and its subsidiaries had approximately 59,000 employees and approximately 6,000 temporary personnel for a total of 68,0000 personnel.  

8

Key Performance Indicators (KPI)

The table below reflects certain KPIs on which the Company is particularly focused on with respect to the management of its workforce.

Available information

We file or furnish with the United States Securities and Exchange Commission (the “SEC”) periodic reports and amendments thereto, which include annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements and other information. Such reports, amendments, proxy statements and other information are made available free of charge on our corporate website at www.autoliv.com and are available as soon as reasonably practicable after they are electronically filed with the SEC. Our Corporate Governance Guidelines, committee charters, code of conduct and other documents governing the Company are also available on our corporate website at www.autoliv.com. The SEC maintains an internet site that contains reports, proxy statements and other information at www.sec.gov. Hard copies of the above-mentioned documents can be obtained free of charge from the Company by contacting us at: Autoliv, Inc., P.O. Box 70381, SE-107 24, Stockholm, Sweden.

Item 1A. Risk Factors

Our business, financial condition, operating results and cash flows may be impacted by a number of factors. A discussion of the risks associated with these material risk factors is included below.

RISKS RELATED TO COVID-19

We face risks related to the novel coronavirus (COVID-19) pandemic that have, and are expected to continue to have, an adverse impact on our business and financial performance

The COVID-19 pandemic has created significant volatility in the global economy and led to significant reduced economic activity and employment and has disrupted, and may continue to disrupt, the global automotive industry and customer sales, production volumes and purchases of light vehicles by end-consumers. The spread of COVID-19 has also caused disruptions in the manufacturing, delivery and overall supply chains of automobile manufacturers and suppliers. Global light vehicle production has been very volatile.  Light vehicle production has decreased significantly for certain periods in 2020 while some vehicle manufacturers have slowed or completely shut down manufacturing operations for a period of time and then restarted or ramped up production in some countries and regions. This may continue As a result, we have modified our production schedules and have experienced, and may continue to experience, delays in the production and distribution of our products and a decline in sales to our customers. As production resumes by us and our customers, production volumes have been and may continue to be volatile. We have also taken protective measures to modify our production environment to ensure the health and safety of our workers which has had an impact on our productivity. Additionally, if the global economic effects caused by the pandemic continue or increase, overall customer demand may decrease, which could have a material and adverse effect on our business, results of operations and financial condition. In addition, if a significant portion of our workforce or our customers’ workforce is affected by COVID-19 either directly or due to government closures or otherwise, associated work stoppages or facility closures would halt or delay production.  The full extent of the effect of the pandemic on us, our customers, our supply chain or the global supply chain and our business will depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the duration and severity of the outbreak, subsequent outbreaks or the extent of any recession resulting from the pandemic. We may continue to experience the effects of the pandemic even after it has waned, and our business, results of operations and financial condition could continue to be affected. In particular, if COVID-19 continues to spread or re-emerges, particularly in the United States, Europe and China, where our operations are most concentrated, resulting in a prolonged period of travel, commercial, social and other similar restrictions, we could experience, among other things:  Adverse impacts on our operations and financial results caused by government and regulatory measures to contain or mitigate the spread of the virus, temporary closures of our facilities or the facilities of our customers or suppliers, which could impact our ability to timely meet our customers’ orders or negatively impact our supply chain; The failure of third parties on which we rely or on which our customers rely, including our suppliers, customers, contractors, commercial banks and external business partners, to meet their respective obligations to the Company, or significant disruptions in their

9

ability to do so, which may be caused by their own financial or operational difficulties including bankruptcy or default; Disruptions or restrictions on our employees’ ability to work effectively, due to illness, quarantines, travel bans, shelter-in-place orders or other limitations; Interruptions to the operations of our business if the health of our executives, management personnel and other employees are affected, particularly if a significant number of individuals are impacted; Any accident, COVID-19 illness, or injury to our employees could result in litigation, manufacturing delays and harm to our reputation, which could negatively affect our business, results of operations and financial condition; Changes in prices of tooling and services may be impacted by worldwide demand and by the ongoing COVID-19 pandemic. Such price increases could materially increase our operating costs and adversely affect our profit margin; Governments and regulators may choose to delay new automobile safety regulations which could impact the average global content of passive safety systems per light vehicle in the near term; Some of our competitors are (or may be) owned by a governmental entity and/or receive various forms of governmental aid or support, which we may not be eligible for, and which may put us at a competitive disadvantage; Increased cybersecurity and privacy risks and risks related to the reliability of technology to support remote operations; Sudden and/or severe declines in the market price of our common stock; and Costs incurred and revenues lost during and from the effects of the COVID-19 pandemic likely will not be recoverable. In addition to the risks specifically described above, the impact of COVID-19 is likely to implicate and exacerbate other risks disclosed in this Item 1A.

RISKS RELATED TO OUR INDUSTRY

The cyclical nature of automotive sales and production can adversely affect our business. Our business is directly related to light vehicle production (“LVP”) in the global market and by our customers, and automotive sales and LVP are the most important drivers for our sales

Automotive sales and production are highly cyclical and can be affected by general or regional economic or industry conditions, the level of consumer demand, recalls and other safety issues, labor relations issues, technological changes, fuel prices and availability, vehicle safety regulations and other regulatory requirements, governmental initiatives, trade agreements, political volatility, especially in energy producing countries and growth markets, changes in interest rate levels and credit availability and other factors. Some regions around the world may at various times be more particularly impacted by these factors than other regions. Economic declines that result in a significant reduction in automotive sales and production by our customers have in the past had, and may in the future have, a material adverse effect on our business, results of operations and financial condition. Our sales are also affected by inventory levels of our customers. We cannot predict when our customers will decide to either increase or reduce inventory levels or whether new inventory levels will approximate historical inventory levels. This may exacerbate variability in our order intake and, as a result, our revenues and financial condition. Uncertainty regarding inventory levels may be exacerbated by consumer financing programs initiated or terminated by our customers or governments as such changes may affect the timing of their sales. Changes in automotive sales and LVP and/or customers’ inventory levels will have an impact on our long-term targets, earnings guidance and estimates. In addition, we base our growth projections in part on business awards, or order intake, made by our customers. However, actual production orders from our customers may not approximate the awarded business or our estimated order intake. Any significant reduction in automotive sales and/or LVP by our customers, whether due to general economic conditions or any other factors relevant to sales or LVP, could have a material adverse effect on our business, results of operations and financial condition.

Growth rates in safety content per vehicle, which can be impacted by changes in consumer trends and political decisions, could affect our results in the future

The average global content of passive safety systems per light vehicle increased 2020 to around $245. Vehicles produced in different markets may have various passive safety content values. For example, in developed markets such as Western Europe and North America, the premium segment has an average passive safety content values of around $360 per vehicle, whereas in growth markets such as China and India the average passive safety content per vehicle is approximately $200 and $88, respectively. Due to the majority of the growth in global LVP over time being concentrated in growth markets the operating results may be impacted if the passive safety content per vehicle remains low and if the penetration of more advanced automotive safety systems does not increase in these regions. As passive safety content per vehicle is also an indicator of our sales development, should these trends continue, the average value of passive safety systems per vehicle could decline.

We operate in a highly competitive market

The market for occupant restraint systems is highly competitive and continues to consolidate. We compete with a number of other companies that produce and sell similar products. Among other factors, our products compete on the basis of price, quality, manufacturing and distribution capability, design and performance, technological innovation, delivery and service. Some of our competitors are subsidiaries (or divisions, units or similar) of companies that are larger and have greater financial and other resources than us. Some of our competitors may also have a “preferred status” as a result of special relationships or ownership interests with certain customers. Our ability to compete successfully depends, in large part, on our success in continuing to innovate and manufacture products that have commercial success with consumers, differentiating our products from those of our competitors, continuing to deliver quality products in the time frames required by our customers, and maintaining best-cost production. We continue to invest in technology and innovation which we believe will be critical to our long-term growth. Our ability to maintain and improve existing products, while successfully developing and introducing distinctive new and enhanced products that anticipate changing customer and consumer preferences and capitalize upon emerging technologies will be a significant factor in our ability to remain competitive. If we are unsuccessful or are less successful than our competitors in predicting the course of market development, developing innovative products, processes, and/or use of materials or adapting to new technologies or evolving regulatory, industry or customer requirements, we may be placed at a competitive disadvantage. For example, the focus of the automotive industry on the development of advanced driver assistance technologies, with the goal of developing and introducing autonomous vehicles, and increase in consumer preferences for mobility on demand services may create demand for new and innovative products in response to OEM and consumer preferences and our success in providing such products will be critical for our long-term growth. Similarly, the demand for our products historically has tracked LVP and a future evolution of the automotive industry to autonomous vehicles and mobility on demand services may lead to a future reduction in annual global LVP. Our competitive environment continues to change, including increased competition from entrants outside the traditional automotive industry, creating uncertainty about the future competitive landscape. Given the competitive nature of our business, the amount of awards we are awarded relative to our peers may decrease over time. The inability to compete successfully

10

could have a material adverse effect on our business, results of operations and financial condition.

The discontinuation, lack of commercial success, or loss of business with respect to a particular vehicle model for which we are a significant supplier could reduce our sales and harm our business

A number of our customer contracts generally require us to supply a customer’s annual requirements for a particular vehicle model and assembly facilities, rather than for manufacturing a specific quantity of products. Such contracts range from one year to the life of the model, which is generally four to seven years. These contracts are often subject to renegotiation, sometimes as frequent as on an annual basis, which may affect product pricing, and generally may be terminated by our customers at any time. Therefore, the discontinuation of, the loss of business with respect to, or a lack of commercial success of a particular vehicle model or brand for which we are a significant supplier could reduce our sales and harm our business prospects, operating results, cash flows, or financial condition.

RISKS RELATED TO OUR BUSINESS

We may incur material losses and costs as a result of product liability, warranty and recall claims that may be brought against us or our customers

We face risks related to product liability claims, warranty claims and recalls in the event that any of our products actually or allegedly are defective, fail to perform as expected or the use of our products results, or is alleged to result, in bodily injury and/or property damage. For example, we are cooperating with Toyota Motor Corp. with respect to its voluntary safety recall of approximately 1.4 million vehicles that are equipped with a certain model of our side curtain airbags (the “Toyota Recall”). We may not be able to anticipate all of the possible performance or reliability problems that could arise with our products after they are released to the market. Additionally, increasing regulation and reporting requirements regarding potentially defective products, particularly in the U.S., may increase the possibility that we become involved in additional product liability or recall investigations or claims. See – “Our business may be adversely affected by changes in automotive safety regulations or concerns that drive further regulation of the automobile safety market”. Although we currently carry product liability and product recall insurance in excess of our self-insured amounts, no assurance can be made that such insurance will provide adequate coverage against potential claims, such insurance is available or will continue to be available in the appropriate markets, or that we will be able to obtain such insurance on acceptable terms in the future as the cost of such insurance has risen in recent years and the cost of our self-insurance program has risen as well. Although we have invested and will continue to invest in our engineering, design, and quality infrastructure, we cannot give any assurance that our products will not suffer from defects or other deficiencies or that we will not experience material warranty claims or additional product recalls. In the future, we could experience additional material warranty or product liability losses and incur significant costs to process and defend these claims. A successful claim brought against us in excess of available insurance coverage, if any, or a requirement to participate in any product recall, could have a material adverse effect on our operating results, cash flows or financial condition. The Toyota Recall and any additional future recalls from this customer or other customers could result in costs not covered by insurance in excess of our self-insurance, further government inquiries, litigation and reputational harm and could divert management’s attention away from other matters. The main variables affecting the costs of a recall are the number of vehicles ultimately determined to be affected by the issue, the cost per vehicle associated with a recall, the determination of proportionate responsibility among the customer, the Company, and any relevant sub-suppliers, and actual insurance recoveries. Every vehicle manufacturer has its own practices regarding product recalls and other product liability actions relating to its suppliers, and the performance and remedial requirements vary between jurisdictions. Due to recall activity in the automotive industry over the past decade, some vehicle manufactures have become even more sensitive to product recall risks. As suppliers become more integrally involved in the vehicle design process and assume more of the vehicle assembly functions, vehicle manufacturers are increasingly looking to their suppliers for contribution when faced with recalls and product liability claims. Product recalls in our industry, even when they do not involve our products, can harm the reputations of our customers, competitors, and us, particularly if those recalls cause consumers to question the safety or reliability of products similar to those we produce. In addition, with global platforms and procedures, vehicle manufacturers are increasingly evaluating our quality performance on a global basis; any one or more quality, warranty or other recall issue(s) (including issues affecting few units and/or having a small financial impact) may cause a vehicle manufacturer to implement measures which may have a severe impact on our operations, such as a global, temporary or prolonged suspension of new orders. In addition, as our products more frequently use global designs and are based on or utilize the same or similar parts, components or solutions, there is a risk that the number of vehicles affected globally by a failure or defect will increase significantly with a corresponding increase in our costs. A warranty, recall or product liability claim brought against us in excess of our available insurance may have a material adverse effect on our business. Vehicle manufacturers are also increasingly requiring their outside suppliers to guarantee or warrant their products and bear the costs of repair and replacement of such products under new vehicle warranties. A vehicle manufacturer may attempt to hold us responsible for some or the entire repair or replacement costs of defective products under new vehicle warranties, when the product supplied did not perform as represented. Accordingly, the future costs of warranty claims by our customers may be material. However, the final amounts determined to be due related to these matters could differ materially from our recorded warranty estimates and our business prospects, operating results, cash flows or financial condition may be materially impacted as a result. In addition, as we adopt new technology, we face an inherent risk of exposure to the claims of others that we have allegedly violated their intellectual property rights. We cannot assure that we will not experience any material warranty, product liability or intellectual property claim losses in the future or that we will not incur significant costs to defend such claims. See “If our patents are declared invalid or our technology infringes on the proprietary rights of others, our ability to compete may be impaired”.

Escalating pricing pressures from our customers may adversely affect our business

The automotive industry continues to experience aggressive pricing pressure from customers. This trend is partly attributable to the major automobile manufacturers’ strong purchasing power. As with other automotive component manufacturers, we are often expected to quote fixed prices or are forced to accept prices with annual price reduction commitments for long-term sales arrangements or discounted reimbursements for engineering work. Price reductions have impacted our sales and profit margins and are expected to continue to do so in the future. Our future profitability will depend upon, among other things, our ability to continuously reduce our cost per unit and maintain our cost structure, enabling us to remain cost-competitive. Our profitability is also influenced by our success in designing and marketing technological improvements in automotive safety systems, which helps us offset price reductions by our customers. If we are unable to offset continued price reductions through improved operating efficiencies and reduced expenditures, these price reductions may have a

11

material adverse effect on our business prospects, operating results, cash flows or financial condition.

We could experience disruption in our supply or delivery chain, which could cause one or more of our customers to halt or delay production

We, as with other component manufactures in the automotive industry, ship our products to customer vehicle assembly facilities throughout the world on a “just-in-time” basis in order for our customers to maintain low inventory levels. Our suppliers (external suppliers as well as our own production sites) use a similar method in providing raw materials to us. However, this “just-in-time” method makes the logistics supply chain in our industry very complex and vulnerable to disruption. Disruptions in our supply chain may result for many reasons, including closures of one of our own or one of our suppliers’ facilities or critical manufacturing lines due to strikes or other labor disputes, mechanical failures, electrical outages, fires, explosions, critical pollution levels, critical health and safety and other working conditions issues (including epidemics and pandemics, such as the coronavirus (COVID-19)), natural disasters political upheaval, as well as logistical complications due to labor disruptions, weather or natural disasters, acts of terrorism, mechanical failures and legislation or regulation regarding the transport of hazardous goods. In particular, if the current coronavirus outbreak continues and results in a prolonged period of travel, commercial and other similar restrictions, particularly to and from China, we and our customers and suppliers could experience supply chain and production disruptions. The extent to which the coronavirus impacts our results will depend on future developments, which are highly uncertain and cannot be predicted. Additionally, we may experience disruptions if there are delays in customs processing, including if we are unable to obtain government authorization to export or import certain materials, including materials that may be viewed as dangerous such as the propellant used for our inflators. As we continue to expand in growth markets, the risk of such disruptions is heightened. The unavailability of even a single small subcomponent necessary to manufacture one of our products, for whatever reason, could force us to cease production of that product, possibly for a prolonged period. Similarly, a potential quality issue could force us to halt deliveries while we validate the products. Even where products are ready to be shipped, or have been shipped, delays may arise before they reach our customer. Also, similar difficulties for other suppliers may force our customers to halt production, which may in turn impact our sales shipments to such customers. When we fail to timely deliver, we may have to absorb our own costs for identifying and resolving the ultimate problem as well as expeditiously producing and shipping replacement components or products. Generally, we must also carry the costs associated with “catching up,” such as overtime and premium freight. If we are the cause of a customer being forced to halt production, the customer may seek to recoup all of its losses and expenses from us. These losses and expenses could be very significant and may include consequential losses such as lost profits. Where a customer halts production because of another supplier failing to deliver on time, we may not be fully compensated, if at all. Thus, any such supply chain disruptions could severely impact our operations and/or those of our customers and force us to halt production for prolonged periods of time which could expose us to material claims for compensation and have a material adverse effect on our business prospects, operating results, or financial condition.

Adverse developments affecting one or more of our major suppliers could harm our profitability

Any significant disruption in our supplier relationships, particularly relationships with single-source suppliers, could harm our profitability. Furthermore, some of our suppliers may not be able to sufficiently manage the currency commodity cost volatility and/or sharply changing volumes while still performing as we expect. For example, recalls or field actions from our customers can stress the capacity of our supply chain and may inhibit our ability to timely deliver order volumes. Over time, more of our suppliers are located in growth markets. As such, there is an increased risk for delivery delays, production delays, production issues or delivery of non-conforming products by our suppliers. Even where these risks do not materialize, we may incur costs as we try to make contingency plans for such risks.

Changes in the source, cost, availability of and regulations pertaining to raw materials and components may adversely affect our profit margins

Our business uses a broad range of raw materials and components in the manufacture of our products, nearly all of which are generally available from a number of qualified suppliers. Our industry may be affected from time to time by limited supplies or price fluctuations of certain key components and materials. Strong worldwide demand for certain raw materials has had a significant impact on prices and short-term availability in recent years. Such price increases could materially increase our operating costs and materially and adversely affect our profit margin, as direct material costs amounted to approximately 49% of our net sales in 2020, of which approximately half is the raw material cost portion. Commercial negotiations with our customers and suppliers may not always offset all of the adverse impact of higher raw material, energy and commodity costs. Even where we are able to pass price increases along to our customer, there may be a lapse of time before we are able to do so such that we must absorb the cost increase. In addition, no assurances can be given that the magnitude and duration of such cost increases or any future cost increases could not have a larger adverse impact on our profitability and consolidated financial position than currently anticipated. Additionally, the SEC requires companies that manufacture products containing certain minerals and their derivatives that are known as “conflict minerals”, originating from the Democratic Republic of Congo or adjoining countries to diligence and report the source of such materials. There are significant resources associated with complying with these requirements, including diligence efforts to determine the sources of conflict minerals used in our products and potential changes to our processes or supplies as a consequence of such diligence efforts. As there may be only a limited number of suppliers able to offer certified “conflict free” conflict minerals, there can be no assurance that we will be able to obtain necessary conflict free minerals from such suppliers in sufficient quantities or at competitive prices. We may face reputational challenges if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to sufficiently verify the origins for all minerals used in our products through the procedures we may implement. Furthermore, our customers are also increasingly requiring us to track sustainable sources of certain raw materials, which also requires additional diligence efforts and there can be no assurance that we will be able to obtain these minerals in a cost-efficient and sustainable manner. Accordingly, these rules and customer requirements may adversely affect our business prospects, operating results, cash flows or financial condition.

12

Our business could be materially and adversely affected if we lost any of our largest customers or if they were unable to pay their invoices

We are dependent on a few large customers with strong purchasing power. This is the result of customer consolidation in the last few decades. In 2020, our top five customers represented around 53% of our consolidated sales. Our largest contract accounted for around 2% of our total fiscal 2020 sales. Although business with any given customer is typically split into several contracts (either on the basis of one contract per vehicle model or on a broader platform basis), the loss of business from any of our major customers (whether by lower overall demand for vehicles, cancellation of existing contracts or the failure to award us new business) could have a material adverse effect on our business, results of operations and financial condition. Similarly, further consolidation of our customers in the future could make us more reliant upon a smaller group of customers for a significant portion of our consolidated sales and negatively impact our bargaining power when contracting with such customers. Customers may put us on a “new business hold,” which would limit our ability to quote or be awarded all or part of their future vehicle contracts if quality or other issues arise in the vehicles for which we were a supplier. Such new business holds range in length and scope and are generally accompanied by a certain set of remedial conditions that must be met before we are eligible to bid for new business. Meeting any such conditions within the prescribed timeframe may require additional Company resources. A failure to satisfy any such conditions may have a material adverse impact on our financial results in the long term. There is a risk that one or more of our major customers may be unable to pay our invoices as they become due or that a customer will simply refuse to make such payments given its financial difficulties. If a major customer would enter into bankruptcy proceedings or similar proceedings whereby contractual commitments are subject to stay of execution and the possibility of legal or other modification, or if a major customer otherwise successfully procures protection against us legally enforcing its obligations, it is likely, absent special relief such as having a “preferred status”, that we will be forced to record a substantial loss. Additional information concerning our major customers is included in Note 21 of the Consolidated Financial Statements in this Annual Report.

Our inability to effectively manage the timing, quality and costs of new program launches could adversely affect our financial performance

To compete effectively in the automotive supply industry, we must be able to launch new products to meet our customers’ timing, performance and quality standards. At times, we face an uneven number of launches, and some launches for various reasons, may have shortened launch lead times. We cannot provide assurance that we will be able to install and certify the equipment needed to produce products for new programs in time for the start of production, or that the transitioning of our manufacturing facilities and resources to full production for such new programs will not impact production rates or other operational efficiency measures at our facilities. In addition, we cannot provide assurance that our customers will execute on schedule the launch of their new product programs, for which we might supply products. Additionally, as a Tier 1 supplier, we must effectively coordinate the activities of numerous suppliers in order to launch programs successfully. Given the complexity of new program launches, especially involving new and innovative technologies, we may experience difficulties managing product quality, timeliness and associated costs. In addition, new program launches require a significant ramp up of costs; however, the sales related to these new programs generally are dependent upon the timing and success of the introduction of new vehicles by the Company’s customers. Our inability to effectively manage the timing, quality and costs of these new program launches could adversely affect our business prospects, operating results, cash flows or financial condition.

Changes in our product mix may impact our financial performance

We sell products that have varying profit margins. Our financial performance can be impacted depending on the mix of products we sell during a given period. Our earnings guidance and estimates assume a certain geographic sales mix as well as a product sales mix. If actual results vary significantly from this projected geographic and product mix of sales, our operating results and financial condition could be negatively impacted.

We are involved from time to time in legal proceedings and our business may suffer as a result of adverse outcomes of current or future legal proceedings

We are, from time to time, involved in litigation, regulatory proceedings and commercial or contractual disputes that may be significant. These matters may include, without limitation, disputes with our suppliers and customers, intellectual property claims, shareholder litigation, government investigations, class action lawsuits, personal injury claims, environmental issues, antitrust, customs and VAT disputes and employment and tax issues. In such matters, government agencies or private parties may seek to recover from us very large, indeterminate amounts in penalties or monetary damages (including, in some cases, treble or punitive damages) or seek to limit our operations in some way. The possibility exists that claims may be asserted against us and their magnitude may remain unknown for long periods of time. These types of lawsuits could require a significant amount of management’s time and attention and a substantial legal liability or adverse regulatory outcome and the substantial expenses to defend the litigation or regulatory proceedings may have a material adverse effect on our customer relationships, business prospects, reputation, operating results, cash flows and financial condition. No assurances can be given that such proceedings and claims will not have a material adverse impact on our profitability and consolidated financial position or that our established reserves or our available insurance will mitigate such impact.

We may be subject to civil antitrust litigation civil antitrust litigation that could negatively impact our business

The Company may be subject to civil antitrust lawsuits in the future in countries that permit such civil claims, including lawsuits or other actions by our customers. The Company was previously the subject of any investigation by the European Commission (“EC”) regarding possible anti-competitive behavior among certain suppliers to the automotive vehicle industry. The Company paid a fine to resolve these matters in 2019. As a result of the outcome of the EC investigation, we are and we could be subject to subsequent civil disputes with non-governmental third parties and civil or stockholder litigation stemming from the same facts and circumstances underlying the EC investigation.  These types of lawsuits require significant management time and attention and could result in significant expenses as well as unfavorable outcomes that could have a material adverse impact on our customer relationships, business prospects, reputation, operating results, cash flows or financial condition, and our insurance may not mitigate such impact. See Note 18 to the Consolidated Financial Statements in this Annual Report.

13

We may have exposure to greater than anticipated tax liabilities

The determination of our worldwide provision for income taxes and other tax liabilities requires estimation and significant judgment, and there are many transactions and calculations where the ultimate tax determination is uncertain. Like many other multinational corporations, we are subject to tax in multiple U.S. and foreign tax jurisdictions. Our determination of our tax liability is always subject to audit and review by applicable domestic and foreign tax authorities, and we are currently undergoing a number of investigations, audits and reviews by taxing authorities throughout the world. Any adverse outcome of any such audit or review could have a negative effect on our business and the ultimate tax outcome may differ from the amounts recorded in our financial statements and may materially affect our financial results in the period or periods for which such determination is made. While we have established reserves based on assumptions and estimates that we believe are reasonable to cover such eventualities, these reserves may prove to be insufficient. In addition, our future income taxes could be adversely affected by earnings being lower than anticipated (or by the incurrence of losses) in jurisdictions that have lower statutory tax rates and higher than anticipated in jurisdictions that have higher statutory tax rates, by changes in the valuation of our deferred tax assets and liabilities, or changes in tax laws, regulations or accounting principles, as well as certain discrete items.

Work stoppages, slow-downs or other labor issues at our customers’ facilities or at our facilities could adversely affect our operations

Because the automotive industry relies heavily on “just-in-time” delivery of components during the assembly and manufacture of vehicles, a work stoppage or slow-down at one or more of the Company’s facilities could have material adverse effects on our business. Similarly, if any of our customers were to experience a work stoppage or slow-down, that customer may halt or limit the purchase of our products. Similarly, a work stoppage or slow-down at another supplier could interrupt production at one of our customers’ facilities which would have the same effect. While labor contract negotiations at our facilities historically have rarely resulted in work stoppages, no assurances can be given that we will be able to negotiate acceptable contracts with these unions or that our failure to do so will not result in work stoppages. A work stoppage or other labor disruption at one or more of our facilities or our customers’ facilities could cause us to shut down production facilities supplying these products, which could have a material adverse effect on our business, results of operations and financial condition.

Our ability to operate our company effectively could be impaired if we fail to attract and retain executive officers and other key personnel

Our ability to operate our business and implement our strategies effectively depends, in part, on the efforts of our executive officers and other key employees. In addition, our future success will depend on, among other factors, our ability to attract, develop and retain other qualified personnel, particularly engineers and other employees with software and technical expertise. The loss of the services of any of our executive officers or other key employees or the failure to attract, develop or retain other qualified personnel could have a material adverse effect on our business.

Restructuring and efficiency initiatives and capacity alignments are complex and difficult and at any time additional restructuring steps may be necessary, possibly on short notice and at significant cost

Our restructuring and efficiency initiatives and capacity alignments include efforts to adjust our manufacturing capacity and cost structure to meet current and projected operational and market requirements, including plant closures, transfer of sourcing to best cost countries, consolidation of our supplier base and standardization of products, to reduce our overhead costs and consolidate our operational centers. The successful implementation of our restructuring activities and capacity alignments will involve sourcing, logistics, technology and employment arrangements. Because these restructuring and efficiency initiatives and capacity alignments can be complex, there may be difficulties or delays in the implementation of any such initiatives and capacity alignments or they may not be immediately effective, resulting in an adverse material impact on our performance. In addition, there is a risk that inflation, high-turnover rates and increased competition may reduce the efficiencies now available in best-cost countries to levels that no longer allow for cost-beneficial restructuring opportunities. Therefore, there can be no assurances that any future restructurings or capacity alignments will be completed as planned or achieve the desired results.

A prolonged recession and/or a downturn in our industry could result in us having insufficient funds to continue our operations and external financing may not be available to us or available only on materially different terms than what has historically been available

Our ability to generate cash from our operations is highly dependent on automotive sales and LVP, the global economy and the economies of our important markets. If LVP were to remain on low levels for an extended period of time, we would experience a significantly negative cash flow. Similarly, if cash losses for customer defaults rise sharply, we would experience a negative cash flow. Such negative cash flow could result in our having insufficient funds to continue our operations unless we can procure external financing, which may not be possible. Our access to debt, securitization, or derivative markets around the world at competitive rates or in sufficient amounts could be affected by credit rating downgrades, market volatility, market disruption, regulatory requirements, or other factors. Our ability to obtain unsecured funding at a reasonable cost is dependent on our credit ratings or our perceived creditworthiness. Our current credit rating could be lowered as a result of us experiencing significant negative cash flows, increasing our indebtedness and leverage, or a dire financial outlook, which may affect our ability to procure financing. We may also for the same, or other reasons, find it difficult to secure new long-term credit facilities, at reasonable terms, when our principal credit facility expires in 2023. Further, even our existing unutilized credit facilities may not be available to us as agreed, or only at additional cost, if participating banks are unable to raise the necessary funds, where, for instance, financial markets are not functioning as expected or one or more banks in our principal credit facility syndicate were to default. As a result, we cannot assure you that we will continue to have sufficient liquidity to meet our operating needs. In the event that we do not have sufficient external financing we may be required to seek additional capital, sell assets, reduce or cut back our operating activities or otherwise alter our business strategy. Information concerning our credit facilities and other financings are included in Item 7 in this Annual Report in the section headed “Treasury Activities” and in Note 14 to the Consolidated Financial Statements in this Annual Report.

14

Our indebtedness may harm our financial condition and results of operations

As of December 31, 2020, we have outstanding debt of $2.4 billion. We may incur additional debt for a variety of reasons. Although our significant credit facilities and debt agreements do not have any financial covenants, our level of indebtedness will have several important effects on our future operations, including, without limitation: a portion of our cash flows from operations will be dedicated to the payment of any interest or could be used for amortization required with respect to outstanding indebtedness; increases in our outstanding indebtedness and leverage will increase our vulnerability to adverse changes in general economic and industry conditions, as well as to competitive pressure; depending on the levels of our outstanding debt, our ability to obtain additional financing for working capital, acquisitions, capital expenditures, general corporate and other purposes may be limited; and potential future tightening of the availability of capital both from financial institutions and the debt markets may have an adverse effect on our ability to access additional capital.

Governmental restrictions may impact our business adversely

Some of our customers are (or may be) owned by a governmental entity, receive various forms of governmental aid or support or are subject to governmental influence in other forms, which may impact us as a supplier to these customers. As a result, they may be required to partner with local entities or procure components from local suppliers to achieve a specific local content or be subject to other restrictions regarding localized content or ownership. The nature and form of any such restrictions or protections, whatever their basis, is very difficult to predict as is their potential impact. However, they are likely to be based on political rather than economical or operational considerations and may materially impact our business.

Impairment charges relating to our assets, goodwill and other intangible assets could adversely affect our financial performance

We periodically review the carrying value of our assets, goodwill and other intangible assets for impairment indicators. If one or more of our customers’ facilities cease production or decrease their production volumes, the assets we carry related to our facilities serving such customers may decrease in value because we may no longer be able to utilize or realize them as intended. Where such decreases are significant, such impairments may have a material adverse impact on our financial results. We monitor the various factors that impact the valuation of our goodwill and other intangible assets, including expected future cash flow levels, global economic conditions, market price for our stock, and trends with our customers. Impairment of goodwill and other identifiable intangible assets may result from, among other things, deterioration in our performance and especially the cash flow performance of these goodwill assets, adverse market conditions and adverse changes in applicable laws or regulations. If there are changes in these circumstances or the other variables associated with the estimates, judgments and assumptions relating to the valuation of goodwill, when assessing the valuation of our goodwill items, we may determine that it is appropriate to write down a portion of our goodwill or intangible assets and record related non-cash impairment charges. In the event that we determine that we are required to write-down a portion of our goodwill items and other intangible assets and thereby record related non-cash impairment charges, our financial condition and operating results would be adversely affected. For additional information, see Part II, Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations - Significant Accounting Policies and Critical Accounting Estimates – Goodwill and Intangibles”.

We face risks related to our defined benefit pension plans and employee benefit plans, including the need for additional funding as well as higher costs and liabilities

Our defined benefit pension plans and employee benefit plans may require additional funding or give rise to higher related costs and liabilities which, in some circumstances, could reach material amounts and negatively affect our operating results. We are required to make certain year-end assumptions regarding our pension plans. Our pension obligations are dependent on several factors, including factors outside our control such as changes in interest rates, the market performance of the diversified investments underlying the pension plans, actuarial data and adjustments and an increase in the minimum funding requirements or other regulatory changes governing the plans. Adverse equity market conditions and volatility in the credit market may have an unfavorable impact on the value of our pension assets and our future estimated pension liabilities. Internal factors such as an adjustment to the level of benefits provided under the plans may also lead to an increase in our pension liability. If these or other internal and external risks were to occur, alone or in combination, our required contributions to the plans and the costs and net liabilities associated with the plans could increase substantially and have a material effect on our business. Information concerning our benefit plans is included in Note 19 of the Consolidated Financial Statements in this Annual Report.

You should not anticipate or expect the payment of cash dividends on our common stock

Our dividend policy is subject to the discretion of our Board of Directors and depends upon a number of factors, including our earnings, financial condition, cash and capital needs, indebtedness and leverage, and general economic or business conditions. On April 2, 2020 our Board of Directors suspended our quarterly dividend after determining that a suspension was necessary in light of the evolving global COVID-19 pandemic, decline in global LVP, the uncertainty surrounding the recession at that time and the inherent risk of customer defaults. There can be no assurance that our Board of Directors will declare dividends in the future.

Cybersecurity incidents or other damage to our technology infrastructure could disrupt business operations, result in the loss of critical and confidential information, and adversely impact our reputation and operating results

We rely extensively on information technology (“IT”) networks and systems, our global data centers and services provided over the internet to process, transmit and store electronic information, and to manage or support a variety of business processes or activities across our facilities worldwide. The secure operation of our IT networks and systems and the proper processing and maintenance of this information are critical to our business operations. We have been, and likely will continue to be, subject to cyber-attacks. To date we have seen no material impact on our business from these attacks or events. Although we seek to deploy comprehensive security measures to prevent, detect, address and mitigate these threats, there has been an increased level of activity, and an associated level of sophistication, in cyber-attacks against large multinational companies. The ever-evolving threats mean we and our third-party service providers and vendors must continually evaluate and adapt our respective systems and processes and overall security environment, as well as those of any companies we acquire. There is no guarantee that these measures will be adequate to safeguard against all data

15

security breaches, system compromises or misuses of data. Our security measures may be breached due to human or technological error, employee malfeasance, system malfunctions or attacks from uncoordinated individuals or sophisticated and targeted measures known as advanced persistent threats, directed at the Company, its products, its customers and/or its third-party service providers. Because techniques used to obtain unauthorized access or to sabotage systems change frequently and generally are not recognized until they are launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Disruptions and attacks on our IT systems or the systems of third parties storing our data or employee malfeasance or human or technological error could result in the misappropriation, loss, destruction or corruption of our critical data and confidential or proprietary information, personal information of our employees, the leakage of our or our customers’ confidential information, improper use of our systems and networks, production downtimes and both internal and external supply shortages, which could have an adverse effect on our results of operations. It may also result in the theft of intellectual property or other misappropriation of assets, or otherwise compromise our confidential or proprietary information and disrupt our operations. The potential consequences of a material cybersecurity incident include reputational damage, theft of intellectual property, litigation with third parties, diminution in the value of our investment in research, development and engineering, diversion of the attention of management away from the operation of our business and increased cybersecurity protection and remediation costs, legal claims and liability, regulatory scrutiny, sanctions, fines or penalties (which may not be covered by our insurance policies), negative publicity, release of sensitive and/or confidential information, increases in operating expenses, or lost revenues which in turn could adversely affect our competitiveness and results of operations. To the extent that any disruption or security breach results in a misappropriation, loss, destruction or corruption of our customer’s information, it could affect our relationships with our customers, create significant expense for us to investigate and remediate damage, lead to claims against the Company and ultimately harm our business. In addition, we may be required to incur significant costs to protect against damage caused by these disruptions or security breaches in the future. In addition, as the regulatory environment related to information security, data collection and use, and privacy becomes increasingly rigorous, with new and constantly changing requirements applicable to our business, compliance with those requirements could result in additional costs. Furthermore, our technology systems are vulnerable to damage or interruption from natural disasters, power loss and telecommunication failures. We continuously seek to maintain a robust program of information security and controls, however, any future significant compromise or breach of our data security, whether external or internal, or misuse of customer, associate, supplier or Company data, could result in significant costs, lost sales, fines, lawsuits, and damage to our reputation.

Third parties that maintain certain of our confidential and proprietary information could experience a cybersecurity incident

We rely on third parties to provide or maintain some of our IT systems, data centers and related services and do not exercise direct control over these systems. Despite the implementation of security measures at third party locations, these IT systems, data centers and cloud services are also vulnerable to security breaches or other disruptions. Additionally, we and certain of our third-party vendors, collect and store personal information in connection with human resources operations and other aspects of our business. While we obtain assurances that any third parties we provide data to will protect this information and, where we believe appropriate, monitor the protections employed by these third parties, there is a risk the confidentiality of data held by us or by third parties may be compromised and expose us to liability for such breach.

Global climate change could negatively affect our business

More regional and/or national requirements to reduce or mitigate the effects of greenhouse gas emissions may adversely impact our business. Today there is a lack of consistent climate legislation which results in economic and regulatory uncertainty. Any future regulations aimed at mitigating climate change may negatively impact the demand for certain of our customer’s products which could in turn impact demand for our products and impact our results of operations. The costs of compliance and any changes to our operations mandated by new or amended laws, may be significant. We may also face unexpected delays in obtaining permits and approvals required by such laws in connection with our manufacturing facilities, which would hinder our operation of these facilities. Furthermore, any violations of these laws may result in substantial fines and penalties, remediation costs, third party damages, or a suspension or cessation of our operations. The manifestations of climate change, such as extreme weather conditions or more frequent extreme weather events could disrupt our operations, damage our facilities, disrupt our supply chain, including our customers or suppliers, or make it harder or more difficult to obtain raw materials necessary for the manufacturing of our products. As a result, severe weather or a natural disaster that results in a prolonged disruption to our operations, or the operations of our customers or suppliers, could have a material adverse effect on our operating results, cash flows or financial condition.

RISKS RELATED TO INTERNATIONAL OPERATIONS

Our business is exposed to risks inherent in international operations

We currently conduct operations in various countries and jurisdictions, including locating certain of our manufacturing and distribution facilities internationally, which subjects us to the legal, political, regulatory and social requirements and economic conditions in these jurisdictions. Some of these countries are considered growth markets and emerging markets. International sales and operations, especially in growth markets, subject us to certain risks inherent in doing business abroad, including: exposure to local economic conditions; unexpected changes in laws, regulations, trade, or monetary or fiscal policy, including interest rates, foreign currency exchange rates, and changes in the rate of inflation in the emerging markets and countries in which we do business; foreign tax consequences; inability to collect, or delays in collecting, value-added taxes and/or other receivables associated with remittances and other payments by subsidiaries; exposure to local political turmoil and challenging labor conditions; changes in general economic and political conditions in countries where we operate, particularly in emerging markets; expropriation and nationalization; enforcing legal agreements or collecting receivables through foreign legal systems; wage inflation in growth markets; currency controls, including lack of liquidity in foreign currency due to governmental restrictions, trade protection policies and currency controls, which may create difficulty in repatriating profits or making other remittances; compliance with the requirements of an increasing body of applicable anti-bribery laws; reduced intellectual property protection in various markets; investment restrictions or requirements; and the imposition of product tariffs and the burden of complying with a wide variety of international and U.S. export laws. The Company is subject to taxation in the U.S. and

16

numerous foreign jurisdictions. The Organization for Economic Co-operation and Development (“OECD”) continues its base erosion and profit shifting (“BEPS”) project begun in 2015 with new proposals for a global minimum tax, further development of a coordinated set of rules for taxation and the allocation of taxing rights between jurisdictions. These proposals, if adopted by countries in which we operate, could result in changes to tax policies, including transfer pricing policies, that could ultimately impact our tax liabilities. The timing or impact of these proposals and recommendations is unclear at this point. Changes in tax laws or policies by the U.S. or foreign jurisdictions could result in a higher effective tax rate on our worldwide earnings, and any such change could have a material adverse effect on our business prospects, cash flows, operating results and financial condition. Our international operations also depend upon favorable trade relations between the U.S. and those foreign countries in which our customers and suppliers have operations. The current U.S. presidential administration has created uncertainty about the future relationship between the U.S. and certain of its trading partners, including with respect to the trade policies and agreements, treaties, government regulations and tariffs that could apply to trade between the U.S. and other nations. These developments may have a material adverse effect on global economic conditions and the stability of global financial markets, and may significantly reduce global trade and, in particular, trade between these nations and the U.S. It could also impact importing certain foreign-produced vehicles into the U.S. Similarly, the political situations in certain countries, specifically Brazil, China, France, Russia, Turkey, and the United Kingdom, make it difficult to predict the near-term stability of trade costs with these nations. Meanwhile, the U.S. presidential election in November 2020 could result in a shift in U.S. trade policy that is impossible to predict at this time. Changes in national policy or continued uncertainty could depress economic activity and restrict our access to suppliers or customers and have a material adverse effect on our cash flows, operating results and financial condition. Increasing our manufacturing footprint in the growth markets and our business relationships with automotive manufacturers in these markets are particularly important elements of our strategy. As a result, our exposure to the risks described above may be greater in the future, and our exposure to risks associated with developing countries, such as the risk of political upheaval and reliability of local infrastructure, may increase.

The exit of the United Kingdom from membership in the European Union may adversely affect our business and profitability

The exit of the United Kingdom (“U.K.”) from the European Union (“EU”) (“Brexit”) could adversely affect European and worldwide economic and market conditions and contribute to instability in global financial and foreign exchange markets, including increased volatility in interest rates and foreign exchange rates. Despite the final agreement between the U.K. and the EU,  it remains difficult to predict the impact Brexit will have on international trade. We conduct business in the U.K. and several EU nations and the taxation policies of the U.K. and the EU nations may change as a result of Brexit, which could adversely impact our tax positions. We may be required to comply with regulatory requirements in the United Kingdom that are in addition to, or inconsistent with, the regulatory requirements of the EU. The effects of Brexit could adversely affect our business prospects, operating results, cash flows and financial condition.

Significant changes to international trade policy, including the recently enacted USMCA could adversely affect our financial performance

In October 2018, the U.S., Mexico and Canada agreed to a trade deal that would replace NAFTA known as The United States Mexico Canada Agreement (“USMCA”). The USMCA has been ratified by Mexico, the U.S. and Canada. The USMCA was entered into on July 1, 2020. As adopted, the USMCA changes the automotive rules of origin that dictate what percentage of an automobile must be built from parts that originated from countries in the North American region. Reflective of the automotive industry, our vehicle parts manufacturing facilities in the U.S., Mexico and Canada are highly dependent on duty-free trade within the USMCA free trade region. As a result of these policy changes, there may be greater restrictions and economic disincentives on international trade. New tariffs and other changes in U.S. trade policy could trigger retaliatory actions by affected countries. Such changes have the potential to adversely impact the U.S. economy or certain sectors thereof, including our industry and the global demand for our products and, as a result, could negatively impact our financial performance.

Our foreign operations may subject us to risks relating to laws governing international relations

Due to our global operations, we are subject to many laws governing international relations (including, but not limited to, the Foreign Corrupt Practices Act, and other anti-bribery regulations in foreign jurisdictions where we do business), which prohibit improper payments to government officials and restrict where and how we can do business, what information or products we can supply to certain countries and what information we can provide to authorities in governmental authorities. We also export components and products that are subject to certain trade-related U.S. laws, including the U.S. Export Administration Act and various economic sanctions programs administered by the U.S. Treasury’s Office of Foreign Assets Control. Although we have procedures and policies in place that should mitigate the risk of violating these laws, there is no guarantee that they will be sufficiently effective. If and when we acquire new businesses, we may not be able to ensure that the pre-existing controls and procedures meant to prevent violations of these laws were effective, and violations may occur if we are unable to timely implement corrective and effective controls and procedures when integrating newly acquired businesses. Any allegations of noncompliance with these laws could harm our reputation, divert management attention and result in significant expenses, and could therefore materially harm our business prospects, operating results and financial condition.

Our business in Asia is subject to aggressive competition and is sensitive to economic and market conditions

We operate in the automotive supply market throughout Asia including the highly competitive markets in China, Korea, and India. In each of these markets we face competition from both international and smaller domestic manufacturers. Due to the significance of the Asian markets for our profit and growth, we are exposed to risks in China, Korea, and India. We anticipate that additional competitors, both international and domestic, may seek to enter the Chinese, Korean, and/or Indian markets resulting in increased competition. Increased competition may result in price reductions, reduced margins and our inability to gain or hold market share. There have been periods of increased market volatility and moderation in the levels of economic growth in China, which resulted in periods of lower automotive production growth rates in China than those previously experienced. Our business in Asia is sensitive to economic and market conditions that drive automotive sales volumes in China, Korea, and India and may be impacted if there are reductions in vehicle demand in those markets. If we are unable to maintain our position in these Asian markets, the pace of growth slows, or vehicle sales in these markets decrease, our business prospects, operating results and financial condition could be materially adversely affected.

17

Global integration may result in additional risks

Because of our efforts to manage costs by integrating our operations globally, we face the additional risk that, should any of the other risks discussed herein materialize, the negative effects could be more pronounced. For example, while supply delays of a component have typically only affected a few customer vehicle models, such a delay could now affect several vehicle models of several customers in several geographic areas. Similarly, any recall or warranty issue we face due to a product defect or failure is now more likely to involve a larger number of units in several geographic areas.

Exchange rate risks

As a result of our global presence, a significant portion of our revenues and expenses are denominated in currencies other than the U.S. dollar. We are therefore subject to foreign currency risks and foreign exchange exposure. Such risks and exposures include: transaction exposure, which arises because the cost of a product originates in one currency and the product is sold in another currency; revaluation effects, which arise from valuation of assets denominated in other currencies than the reporting currency of each unit; translation exposure in the income statement, which arises when the income statements of non-U.S. subsidiaries are translated into U.S. dollars; translation exposure in the balance sheet, which arises when the balance sheets of non-U.S. subsidiaries are translated into U.S. dollars; and changes in the reported U.S. dollar amounts of cash flows. We cannot predict exchange rate volatility or the extent of its impact on our future financial results. We typically denominate foreign transactions in foreign currencies to achieve a natural hedge. However, a natural hedge cannot be achieved for all our currency flows; therefore, a net transaction exposure remains within the group. The net exposure can be significant and creates a transaction exposure risk for the Company. The Company does not hedge translation exposure. However, we do engage in foreign exchange rate hedging from time to time related to foreign currency transactions.

RISKS RELATED TO ACQUISITIONS

We face risks in connection with acquisitions and joint ventures

Our growth has been enhanced through strategic opportunities, including acquisitions of businesses, products and technologies, and joint development agreements that we believe will complement our business. We regularly evaluate acquisition opportunities, frequently engage in acquisition discussions, conduct due diligence activities in connection with possible acquisitions, and, where appropriate, engage in acquisition negotiations. We may not be able to successfully identify suitable acquisition and joint venture candidates or complete transactions on acceptable terms, integrate acquired operations into our existing operations or expand into new markets. Our failure to identify suitable strategic opportunities may restrict our ability to grow our business. These strategic opportunities also involve numerous additional risks to us and our investors, including: risks related to retaining acquired management and employees; difficulties in integrating acquired technologies, products, operations, services and personnel with our existing businesses; diversion of our management’s attention from other business concerns; assumption of contingent liabilities; adverse financial impacts from the amortization of expenses related to intangible assets; adverse financial impacts from potential impairment of goodwill; incurrence of indebtedness; and potential adverse financial impacts. In the future, we may pursue acquisitions of businesses or products that are complementary to our business but for which we have historically had little or no direct experience. These transactions can involve significant challenges and risks as well as significant time and resources that may divert management’s attention from other business activities. If we fail to adequately manage these risks, the acquisitions may not result in revenue growth, operational synergies or service or technology enhancements, which could adversely affect our financial condition.

RISKS RELATED TO INTELLECTUAL PROPERTY

If our patents are declared invalid or our technology infringes on the proprietary rights of others, our ability to compete may be impaired

We have developed a considerable amount of proprietary technology related to automotive safety systems and rely on a number of patents to protect such technology. Our intellectual property plays an important role in maintaining our competitive position in a number of the markets we serve. At present, we hold more than 6,000 patents covering a large number of innovations and product ideas, mainly in the fields of seatbelt and airbag technologies. In addition to our in-house research and development efforts, we seek to acquire rights to new intellectual property through corporate acquisitions, asset acquisitions, licensing and joint venture arrangements. Our patents and licenses expire on various dates during the period from 2021 to 2039. We do not expect the expiration of any single patent or license to have a material adverse effect on our business, operating results and financial condition. Developments or assertions by or against us relating to intellectual property rights could negatively impact our business. We primarily protect our innovations with patents and vigorously protect and defend our patents, trademarks and know-how against infringement and unauthorized use. If we are not able to protect our intellectual property and our proprietary rights and technology, we could lose those rights and incur substantial costs policing and defending those rights. We also generate license revenue from these patents, which we may lose if we do not adequately protect our intellectual property and proprietary rights. Our means of protecting our intellectual property, proprietary rights and technology may not be adequate, and our competitors may independently develop technologies that are similar or superior to our proprietary technologies, duplicate our technologies, or design around the patents we own or license. In addition, the laws of some foreign countries do not protect our proprietary rights to as great an extent as the laws of the U.S. and we may encounter significant problems in protecting and defending our intellectual property rights in certain foreign jurisdictions. This could make it difficult for us to stop the infringement of our patents or misappropriation of our other intellectual property rights. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business. Accordingly, our efforts to protect our intellectual property rights in such countries may be inadequate.

18

We may not be able to protect our proprietary technology and intellectual property rights, which could result in the loss of our rights or increased costs.

Although we believe that our products and technology do not infringe the proprietary rights of others, third parties may assert infringement claims against us in the future. Additionally, we license from third parties proprietary technology covered by patents, and we cannot be certain that any such patents will not be challenged, invalidated or circumvented. Such licenses may also be non-exclusive, meaning our competition may also be able to access such technology. Further, we expect to continue to expand our products and services and expand into new businesses, including through acquisitions, joint ventures and joint development agreements, which could increase our exposure to patent and other intellectual property claims from competitors and other parties. If claims alleging patent, copyright or trademark infringement are brought against us and are successfully prosecuted against us, they could result in substantial costs. If a successful claim is made against us and we fail to develop non-infringing technology, our business, operating results and financial condition could be materially adversely affected. In addition, certain of our products utilize components that are developed by third parties and licensed to us. If claims alleging patent, copyright or trademark infringement are brought against such licensors and successfully prosecuted, they could result in substantial costs, and we may not be able to replace the functions provided by these licensors. Alternate sources for the technology currently licensed to us may not be available in a timely manner, may not provide the same functions as currently provided or may be more expensive than products currently used. We may develop proprietary information through our in-house research and development efforts, consulting arrangements or research collaborations with other entities or organizations. We may seek to protect this proprietary information by entering into confidentiality agreements or consulting, services or employment agreements that contain non-disclosure and non-use provisions with our employees, consultants, scientific advisors and other third parties. However, we may fail to enter into the necessary agreements, and even if entered into, these agreements may be breached or may otherwise fail to prevent disclosure, third-party infringement or misappropriation of our proprietary information.

We may not be able to respond quickly enough to changes in technology and technological risks and to develop our intellectual property into commercially viable products

Changes in legislative, regulatory or industry requirements or in competitive technologies may render certain of our products obsolete or less attractive to our customers. We currently license certain proprietary technology to third parties and, if such technology becomes obsolete or less attractive, those licensees could terminate our license agreements, which could adversely affect our results of operations. Our ability to anticipate changes in technology and regulatory standards and to successfully develop and introduce new and enhanced products on a timely basis will be a significant factor in our ability to remain competitive. We cannot provide assurance that we will be able to achieve the technological advances that may be necessary for us to remain competitive or that certain of our products will not become obsolete. We are also subject to the risks generally associated with new product introductions and applications, including lack of market acceptance, delays in product development and failure of products to operate properly. As part of our business strategy, we may from time to time seek to acquire businesses or assets that provide us with additional intellectual property. We may experience problems integrating acquired technologies into our existing technologies and products, and such acquired intellectual property may be subject to known or contingent liabilities such as infringement claims.

Some of our products and technologies may use “open source” software, which may restrict how we use or distribute our products or require that we release the source code of certain products subject to those licenses

Some of our products and technologies may incorporate software licensed under so-called “open source” licenses. In addition to risks related to license requirements, usage of open source software can lead to greater risks than use of third-party commercial software, as open source licensors generally do not provide warranties or controls on origin of the software. Additionally, open source licenses typically require that source code subject to the license be made available to the public and that any modifications or derivative works to open source software continue to be licensed under open source licenses. These open source licenses typically mandate that proprietary software, when combined in specific ways with open source software, become subject to the open source license. If we combine our proprietary software in such ways with open source software, we could be required to release the source code of our proprietary software. We take steps to ensure that our proprietary software is not combined with, and does not incorporate, open source software in ways that would require our proprietary software to be subject to an open source license. However, few courts have interpreted open source licenses; therefore the manner in which these licenses may be interpreted and enforced is subject to some uncertainty.

RISKS RELATED TO GOVERNMENT REGULATIONS AND TAXES

Our business may be adversely affected by laws or regulations, including environmental, occupational health and safety or other governmental regulations

We are subject to various federal, state, local and foreign laws and regulations, including those related to the requirements of environmental, occupational health and safety, financial and other matters. We cannot predict the substance or impact of pending or future legislation or regulations, or the application thereof. The introduction of new laws or regulations or changes in existing laws or regulations, or the interpretations thereof, could increase the costs of doing business for us or our customers or suppliers or restrict our actions and adversely affect our business prospects, operating results, cash flows or financial condition. Our operations are subject to environmental and safety laws and regulations governing, among other things, emissions to air, discharges to waters and the generation, handling, storage, transportation, treatment and disposal of waste and other materials. The operation of automotive parts manufacturing facilities entails risks in these areas, and we cannot assure that we will not incur material costs or liabilities as a result. Additionally, environmental laws, regulations, and permits and the enforcement thereof change frequently and have tended to become increasingly stringent over time, which may necessitate substantial capital expenditures or operating costs or may require changes of production processes. Although we have no known pending material environmental issues, there is no assurance that we will not be adversely impacted by any environmental costs, liabilities or claims in the future either under present laws and regulations or those that may be adopted or imposed in the future. Our costs, liabilities, and obligations relating to environmental matters may have a material adverse

19

effect on our business, operating results, cash flows, or financial condition. Our facilities in the U.S. are subject to regulation by the Occupational Safety and Health Administration (“OSHA”), which regulates the protection of the health and safety of workers. In addition, the OSHA hazard communication standard requires that we maintain information about hazardous materials used or produced in our operations and that we provide this information to employees, state and local governmental authorities and local residents. We are also subject to occupational safety regulations in other countries. Our failure to comply with government occupational safety regulations, including OSHA requirements, or general industry standards relating to employee health and safety, keep adequate records or monitor occupational exposure to regulated substances could expose us to liability, enforcement, and fines and penalties, and could have a material adverse effect on our business, operating results, cash flows, or financial condition. Although we employ safety procedures in the design and operation of our facilities, there is a risk that an accident or injury to one of our employees could occur in one of our facilities. Any accident or injury to our employees could result in litigation, manufacturing delays and harm to our reputation, which could negatively affect our business, operating results and financial condition.

Our business may be adversely affected by changes in automotive safety regulations or concerns that drive further regulation of the automobile safety market

Government vehicle safety regulations are a key driver in our business. Historically, these regulations have imposed ever more stringent safety regulations for vehicles. Safety regulations have a positive impact on driver awareness and acceptance of automotive safety products and technology. These more stringent safety regulations often require vehicles to have more safety content per vehicle and more advanced safety products, which has thus been a driver of growth in our business. However, these regulations are subject to change based on a number of factors that are not within our control, including new scientific or medical data, adverse publicity regarding the industry recalls and safety risks of airbags or seatbelts (for instance, to children and small adults), domestic and foreign political developments or considerations, and litigation relating to our products and our competitors’ products. Changes in government regulations in response to these and other considerations could have a severe impact on our business. Although we believe that over time safety will continue to be a regulatory priority, if government priorities shift and we are unable to adapt to changing regulations, our business may suffer material adverse effects. The regulatory obligation of complying with safety regulations could increase as federal and local regulators impose more stringent compliance and reporting requirements in response to product recalls and safety issues in our industry. We are subject to existing stringent requirements under the National Traffic and Motor Vehicle Safety Act of 1966 (the “Vehicle Safety Act”), including a duty to report, subject to strict timing requirements, safety defects with our products. The Vehicle Safety Act imposes potentially significant civil penalties for violations including the failure to comply with such reporting actions. We are also subject to the existing U.S. Transportation Recall Enhancement, Accountability and Documentation (TREAD) Act, which requires equipment manufacturers, such as Autoliv, to comply with “Early Warning” requirements by reporting certain information to the National Highway Traffic Safety Administration (“NHTSA”) such as: information related to defects or reports of injury related to our products. TREAD imposes criminal liability for violating such requirements if a defect subsequently causes death or bodily injury. In addition, the Vehicle Safety Act authorizes NHTSA to require a manufacturer to recall and repair vehicles that contain safety defects or fail to comply with U.S. federal motor vehicle safety standards. Sales into foreign countries may be subject to similar regulations. Due to the record recall of airbag inflators of one of our competitors, NHTSA has become more active in requesting information from suppliers and vehicle manufactures regarding potential product defects and we expect that to continue or increase under the new U.S. presidential administration. For example, in connection with the Toyota Recall, we, in connection with Toyota, have informed NHTSA of the reported incidents and Toyota has discussed with NHTSA what action it will take to address the issue.

Negative or unexpected tax developments could adversely affect our effective tax rate, operating results and financial condition

Changes in, or changes in the application of, U.S. or foreign tax laws, regulations or accounting principles with respect to matters such as tax base, tax rates, transfer pricing, dividends and restrictions on certain forms of tax relief or limitations on favorable tax treatment could affect the carrying value of our deferred tax assets and/or our effective tax rate. Our annual tax rate is based on our income and the tax laws in the jurisdictions in which we operate. Because of our global operations we face uncertainties and judgments in the application of complex tax regulations in a multitude of jurisdictions. Significant judgment is required in determining our effective tax rate and in evaluating our tax positions. Although we believe that our tax estimates are reasonable, the final determination of our tax liability may be different from what is reflected in our historical income tax provisions and accruals. We are regularly examined by tax authorities around the world and in a number of jurisdictions, we are currently under examination, which inherently creates uncertainty. Although we periodically assess the likelihood of adverse outcomes, negative or unexpected results from one or more of such reviews and audits, including any related interest or penalties imposed by governmental authorities, could increase our effective tax rate and adversely impact our operating results, cash flows or financial condition. The effective tax rates used for interim reporting are based on our projected full-year geographic earnings mix and take into account projected tax costs on intercompany dividends from lower tier subsidiaries.  Changes in currency exchange rates, earnings mix among taxing jurisdictions, or the ability of our subsidiaries to pay dividends could impact our reported effective tax rates, or cause fluctuations in the tax rate from quarter to quarter. Certain anti-trust judgements or settlements may not be tax deductible, which could have a material negative impact to our annual tax rate. A number of other factors may also increase our effective tax rate, which could have an adverse impact on our profitability and operating results. Due to our numerous foreign operations, our tax rate may be impacted by our global mix of earnings if our pre-tax income is lower than anticipated in countries with lower statutory tax rates and/or is higher than anticipated in countries with higher statutory tax rates. Based on U.S. regulatory rules, we do not record current or deferred tax liabilities on permanent investments in our foreign subsidiaries and our foreign earnings that are indefinitely reinvested. See Note 6 to the Consolidated Financial Statements in this Annual Report.

We may not be able to fully realize our deferred tax assets

We currently carry deferred tax assets, net of valuation allowances, resulting from deductible temporary differences and tax loss carry-forwards, both of which will reduce taxable income in the future. However, deferred tax assets may only be realized against taxable income. The amount of our deferred tax assets could be reduced, from time to time, due to adverse changes in our operations or in estimates of future taxable income from operations during the carry-forward period as a result of a deterioration in market conditions or other circumstances. Any such reduction would adversely affect our income in the period of the adjustment. Additional information on our deferred tax assets is included in Note 6 to the Consolidated Financial Statements in this Annual Report.

20

RISKS RELATED TO THE SEPARATION OF VEONEER

We could incur significant liability if the separation is determined to be a taxable transaction

We have received an opinion of outside counsel to the effect that, for U.S. federal income tax purposes, the separation should qualify, for both Autoliv and its stockholders, as a reorganization within the meaning of Sections 368(a)(1)(D) and 355 of the U.S. Internal Revenue Code of 1986, as amended. The opinion is based on and relies on, among other things, certain facts and assumptions, as well as certain representations, statements and undertakings of Autoliv and Veoneer, including those relating to the past and future conduct of Autoliv and Veoneer. If any of these facts, assumptions, representations, statements or undertakings is, or becomes, inaccurate or incomplete, reliance on the opinion may be affected. An opinion of outside counsel represents their legal judgment but is not binding on the IRS or any court. Accordingly, there can be no assurance that the IRS will not challenge the conclusions reflected in the opinion or that a court would not sustain such a challenge.

Potential indemnification obligations to Veoneer or a refusal of Veoneer to indemnify us pursuant to the agreements executed in connection with the internal reorganization and spin-off could materially adversely affect us

The transaction agreements we entered into with Veoneer in connection with the internal reorganization and the spin-off provide for cross-indemnities that require Autoliv and Veoneer to bear financial responsibility for each company’s business prior to the internal reorganization or spin-off, as applicable, and to indemnify the other party in connection with a breach of such party of the transaction agreements; provided, however, certain warranty, recall and product liabilities for electronics products manufactured prior to the completion of the internal reorganization have been retained by us and we will indemnify Veoneer for any losses associated with such warranty, recall or product liabilities pursuant to the distribution agreement entered into as part of the spin-off. Any indemnities that we are required to provide to Veoneer may be significant and could negatively affect our business. In addition, there can be no assurance that the indemnities from Veoneer will be sufficient to protect us against the full amount of any potential liabilities. Even if we do succeed in recovering from Veoneer any amounts for which we are held liable, we may be temporarily required to bear these losses ourselves. In addition, each of these risks could have a material adverse effect on our business, operating results and financial condition.

Item 1B. Unresolved Staff Comments

Not applicable.

21

Item 2. Properties

Autoliv’s principal executive offices are located at Klarabergsviadukten 70, Section B7, SE-111 64, Stockholm, Sweden. Autoliv’s various businesses operate in a number of production facilities and offices. Autoliv believes that its properties are adequately maintained and suitable for their intended use and that the Company’s production facilities have adequate capacity for the Company’s current and foreseeable needs. All of Autoliv’s production facilities and offices are owned or leased by operating (either subsidiary or joint venture) companies.

22

23

24

Item 3. Legal Proceedings

In the ordinary course of our business, we are subject to legal proceedings brought by or against us and our subsidiaries.

See Note 18 to the Consolidated Financial Statements in this Annual Report for a summary of certain ongoing legal proceedings. Such information is incorporated into this Part I, Item 3 – “Legal Proceedings” by reference.

Item 4. Mine Safety Disclosures

Not applicable.

25

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Shareholder information

The primary exchange market for Autoliv’s securities is the New York Stock Exchange (NYSE) where Autoliv’s common stock trades under the symbol “ALV”. Autoliv’s Swedish Depositary Receipts (SDRs) are traded on NASDAQ Stockholm’s list for large market cap companies under the symbol “ALIV SDB”. Options in SDRs trade on Nasdaq Stockholm under the name “Autoliv SDB”.  Options in Autoliv shares are traded on NASDAQ OMX PHLX and on NYSE Amex Options under the symbol “ALV”.

Share price information*

26

* For all periods before the distribution date of Veoneer on June 29, 2018, the Autoliv share prices are adjusted by a factor of 72.04%.

Number of shares

During 2020, the weighted average number of shares outstanding (excluding dilution and treasury shares) increased to 87.3 million from 87.2 million in 2019. The weighted average number of shares outstanding for the full year 2020, assuming dilution, increased to 87.5 from 87.4 million in 2019.

Stock options (if exercised) and granted Restricted Stock Units (RSUs) and Performance Shares (PSs) could increase the number of shares outstanding by 0.5 million shares in the aggregate. Combined, this would add 0.6% to the number of shares outstanding. On December 31, 2020, 3.0 million shares were available for repurchase pursuant to the stock repurchase program authorized by the Board of Directors in 2014. On December 31, 2020, the Company had 15.4 million treasury shares.

Shareholders

As of the end of 2020 around 20% of Autoliv’s securities were held by U.S.-based shareholders and close to 57% by Sweden-based shareholders. Most of the remaining Autoliv securities were held in the U.K., Switzerland, Norway, France and Denmark.

Dividends

If declared by the Board of Directors, quarterly dividends are usually paid on the first Thursday in the last month of each quarter. Declared dividends are announced in press releases and published on Autoliv’s corporate website. Autoliv has a history of paying quarterly cash dividends; however, on April 2, 2020, our Board of Directors suspended our quarterly dividend after determining that a suspension was necessary in light of the evolving global COVID-19 pandemic, decline in global LVP, the uncertainty surrounding the recession at that time and the inherent risk of customer defaults. The Board revisits dividends on a quarterly basis. There can be no assurance that our Board of Directors will declare dividends in the future. See Autoliv’s corporate website for additional details regarding historical dividends.

Stock incentive plan

Autoliv employees participate in the Autoliv, Inc. 1997 Stock Incentive Plan, as amended (the “Stock Incentive Plan”) and receive Autoliv stock-based awards from time to time. In connection with the spin-off, each outstanding Autoliv stock-based award as of June 29, 2018 was converted to stock awards that have underlying shares of both Autoliv and Veoneer common stock (see Note 17 to the Consolidated Financial Statements in this Annual Report). Additional information regarding the securities authorized for issuance under the Stock Incentive Plan is included in Item 12 of this Annual Report.

Autoliv has adopted a Stock Ownership Policy for Executives requiring the Company’s Chief Executive Officer (CEO) to accumulate and hold the number of Autoliv shares having a value of twice his annual base salary. For other executives, the minimum requirement is, over time, a holding equal to each executive’s annual base salary.

Stock repurchase program

Autoliv initiated its repurchase program in 2000 with 10 million shares and has subsequently increased the total authorization four times between 2000 and 2014 to 47.5 million shares. Such purchases may be made from time to time on the open market or otherwise at the discretion of management. There is no expiration date for the share repurchase authorization to provide management flexibility in the Company’s repurchases.

In total, Autoliv repurchased 44.5 million shares between May 2000 and December 31, 2017 for cash of $2,498 million, including commissions. No repurchases were made during 2019 or 2020. Autoliv has made no share repurchases since June 30, 2017. The maximum number of shares that may still be purchased under the stock repurchase program amounted to 2,986,288 shares at December 31, 2020.

Of the total number of repurchased shares, 23.6 million shares were utilized for the equity units offering during 2009-2012. In addition, approximately 5.5 million shares have been utilized by the Stock Incentive Plan. At December 31, 2020, 15.4 million of the repurchased shares remain in treasury stock.

27

Item 6. Selected Financial Data

Selected financial data for the last five fiscal years ended December 31 for the Continuing Operations, unless noted, is summarized in the table below.