10-Q 1 lantronix_10q-093020.htm FORM 10-Q

Table of Contents

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

x      QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended September 30, 2020

 

OR

 

o      TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from _________ to ___________.

 

Commission file number: 1-16027

 

 

LANTRONIX, INC.

(Exact name of registrant as specified in its charter)

 

Delaware 33-0362767
(State or other jurisdiction of incorporation or organization) (I.R.S. Employer Identification No.)

 

7535 Irvine Center Drive, Suite 100, Irvine, California

(Address of principal executive offices)

 

92618

(Zip Code)

 

(949) 453-3990

(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

  

Title of each class Trading Symbol(s) Name of each exchange on which registered
Common Stock, $0.0001 par value LTRX The Nasdaq Stock Market LLC

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x No o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o   Accelerated filer o
Non-accelerated filer x   Smaller reporting company x
Emerging Growth Company o    

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

 

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act). Yes o No x

 

As of November 6, 2020, there were 28,590,989 shares of the registrant’s common stock outstanding.

 

 

   

 

 

LANTRONIX, INC.

 

FORM 10-Q

FOR THE QUARTERLY PERIOD ENDED

September 30, 2020

 

INDEX

 

    Page
     
  CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS 3
     
PART I. FINANCIAL INFORMATION 4
     
Item 1. Financial Statements 4
     
  Unaudited Condensed Consolidated Balance Sheets at September 30, 2020 and June 30, 2020 4
     
  Unaudited Condensed Consolidated Statements of Operations for the Three Months Ended September 30, 2020 and 2019 5
     
  Unaudited Condensed Consolidated Statements of Stockholders’ Equity for the Three Months Ended September 30, 2020 and 2019 6
     
  Unaudited Condensed Consolidated Statements of Cash Flows for the Three Months Ended September 30, 2020 and 2019 7
     
  Notes to Unaudited Condensed Consolidated Financial Statements 8
     
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations 20
     
Item 3. Quantitative and Qualitative Disclosures about Market Risk 29
     
Item 4. Controls and Procedures 29
     
PART II. OTHER INFORMATION 30
     
Item 1. Legal Proceedings 30
     
Item 1A Risk Factors 30
     
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds 40
     
Item 3. Defaults Upon Senior Securities 43
     
Item 4. Mine Safety Disclosures 43
     
Item 5. Other Information 43
     
Item 6. Exhibits 43

 

 

 

 

 2 

 

 

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This Quarterly Report on Form 10-Q for the three months ended September 30, 2020, or this Report, contains forward-looking statements within the meaning of the federal securities laws, which statements are subject to substantial risks and uncertainties. These forward-looking statements are intended to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact included in this Report, or incorporated by reference into this Report, are forward-looking statements. Throughout this Report, we have attempted to identify forward-looking statements by using words such as “may,” “believe,” “will,” “could,” “project,” “anticipate,” “expect,” “estimate,” “should,” “continue,” “potential,” “plan,” “forecasts,” “goal,” “seek,” “intend,” other forms of these words or similar words or expressions or the negative thereof. Additionally, statements concerning future matters such as our expected earnings, revenues, expenses and financial condition, our expectations with respect to the development of new products, expectations regarding the impact of the COVID-19 pandemic and other statements regarding matters that are not historical are forward-looking statements.

 

We have based our forward-looking statements on management’s current expectations and projections about trends affecting our business and industry and other future events. Although we do not make forward-looking statements unless we believe we have a reasonable basis for doing so, we cannot guarantee their accuracy. Forward-looking statements are subject to substantial risks and uncertainties that could cause our future business, financial condition, results of operations or performance to differ materially from our historical results or those expressed or implied in any forward-looking statement contained in this Report. Some of the risks and uncertainties that may cause actual results to differ from those expressed or implied in the forward-looking statements are described in Part II, Item 1A of this Report, as well as in our other public filings with the SEC. In addition, actual results may differ as a result of additional risks and uncertainties of which we are currently unaware or which we do not currently view as material to our business.

 

You should read this Report in its entirety, together with the documents that we file as exhibits to this Report and the documents that we incorporate by reference into this Report, with the understanding that our future results may be materially different from what we currently expect. The forward-looking statements we make speak only as of the date on which they are made. We expressly disclaim any intent or obligation to update any forward-looking statements after the date hereof to conform such statements to actual results or to changes in our opinions or expectations, except as required by applicable law or the rules of The Nasdaq Capital Market. If we do update or correct any forward-looking statements, investors should not conclude that we will make additional updates or corrections.

 

We qualify all of our forward-looking statements by these cautionary statements.

 

 


 

 

 

 

 

 

 

 

 

 

 3 

 

 

PART I. FINANCIAL INFORMATION

  

Item 1.   Financial Statements

 

LANTRONIX, INC.

UNAUDITED CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands)

 

   September 30,   June 30, 
   2020   2020 
Assets          
Current assets:          
Cash and cash equivalents  $7,709   $7,691 
Accounts receivable, net   12,345    11,411 
Inventories, net   13,888    13,781 
Contract manufacturers' receivable   551    337 
Prepaid expenses and other current assets   1,690    1,290 
Total current assets   36,183    34,510 
Property and equipment, net   1,555    1,587 
Goodwill   15,810    15,810 
Purchased intangible assets, net   11,567    12,449 
Lease right-of-use assets   2,974    3,345 
Other assets   241    232 
Total assets  $68,330   $67,933 
           
Liabilities and stockholders' equity          
Current liabilities:          
Accounts payable  $6,676   $5,331 
Accrued payroll and related expenses   2,390    2,658 
Short-term debt, net   1,472    1,472 
Other current liabilities   6,339    6,308 
Total current liabilities   16,877    15,769 
Long-term debt, net   3,314    3,682 
Other non-current liabilities   1,640    1,962 
Total liabilities   21,831    21,413 
           
Commitments and contingencies (Note 8)          
           
Stockholders' equity:          
Common stock   3    3 
Additional paid-in capital   246,546    246,265 
Accumulated deficit   (200,421)   (200,119)
Accumulated other comprehensive income   371    371 
Total stockholders' equity   46,499    46,520 
Total liabilities and stockholders' equity  $68,330   $67,933 

 

See accompanying notes.

 

 

 

 4 

 

 

LANTRONIX, INC.

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)

 

   Three Months Ended 
   September 30, 
   2020   2019 
Net revenue  $17,146   $12,741 
Cost of revenue   8,907    6,546 
Gross profit   8,239    6,195 
Operating expenses:          
Selling, general and administrative   4,899    4,473 
Research and development   2,572    2,621 
Restructuring, severance and related charges   92    749 
Acquisition-related costs       643 
Amortization of purchased intangible assets   882    144 
Total operating expenses   8,445    8,630 
Loss from operations   (206)   (2,435)
Interest income (expense), net   (85)   56 
Other income (expense), net   39    (43)
Loss before income taxes   (252)   (2,422)
Provision for income taxes   50    48 
Net loss  $(302)  $(2,470)
           
Net loss per share - basic and diluted  $(0.01)  $(0.11)
           
Weighted-average common shares - basic and diluted   28,371    22,913 


 

See accompanying notes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 5 

 

 

LANTRONIX, INC.

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In thousands)

 

   Three Months Ended September 30, 2020 
                   Accumulated     
           Additional       Other   Total 
   Common Stock   Paid-In   Accumulated   Comprehensive   Stockholders' 
   Shares   Amount   Capital   Deficit   Income   Equity 
Balance at June 30, 2020   28,231   $3   $246,265   $(200,119)  $371   $46,520 
Shares issued pursuant to stock awards, net   354        167            167 
Tax withholding paid on behalf of employees for restricted shares           (489)           (489)
Share-based compensation           603            603 
Net loss               (302)       (302)
Balance at September 30, 2020   28,585   $3   $246,546   $(200,421)  $371   $46,499 
                               
    Three Months Ended September 30, 2019 
                        Accumulated      
              Additional         Other    Total 
    Common Stock    Paid-In    Accumulated    Comprehensive    Stockholders' 
    Shares    Amount    Capital    Deficit    Income    Equity 
Balance at June 30, 2019   22,812   $2   $226,274   $(189,381)  $371   $37,266 
Shares issued pursuant to stock awards, net   226        145            145 
Tax withholding paid on behalf of employees for restricted shares           (127)           (127)
Share-based compensation           578            578 
Net loss               (2,470)       (2,470)
Balance at September 30, 2019   23,038   $2   $226,870   $(191,851)  $371   $35,392 

 

See accompanying notes.

 

 

 

 6 

 

 

LANTRONIX, INC.

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

 

   Three Months Ended 
   September 30, 
   2020   2019 
Operating activities          
Net loss  $(302)  $(2,470)
Adjustments to reconcile net loss to net cash provided by (used in) operating activities:          
Share-based compensation   603    578 
Depreciation and amortization   221    147 
Amortization of purchased intangible assets   882    144 
Amortization of manufacturing profit in acquired inventory associated with acquisitions   7    171 
Amortization of deferred debt issuance costs   7     
Changes in operating assets and liabilities:          
Accounts receivable   (934)   863 
Inventories   (114)   (474)
Contract manufacturers' receivable   (214)   905 
Prepaid expenses and other current assets   (400)   (304)
Other assets   362    74 
Accounts payable   1,269    (381)
Accrued payroll and related expenses   (268)   279 
Other liabilities   (289)   (611)
Net cash provided by (used in) operating activities   830    (1,079)
           
Investing activities          
Purchases of property and equipment   (113)   (118)
Cash payment for acquisitions, net of cash and cash equivalents acquired       (5,073)
Net cash used in investing activities   (113)   (5,191)
           
Financing activities          
Net proceeds from issuances of common stock   167    145 
Tax withholding paid on behalf of employees for restricted shares   (489)   (127)
Payment of borrowings on term loan   (375)    
Payment of lease liabilities   (2)   (2)
Net cash provided by (used in) financing activities   (699)   16 
           
Increase in cash, cash equivalents, and restricted cash   18    (6,254)
Cash and cash equivalents at beginning of period   7,691    18,282 
Cash and cash equivalents at end of period  $7,709   $12,028 

 

See accompanying notes.

 

 

 

 7 

 

 

LANTRONIX, INC.

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

September 30, 2020

 

 

1. Overview, Basis of Presentation and Significant Accounting Policies

 

Overview

 

Lantronix, Inc., which we refer to herein as the Company, Lantronix, we, our, or us, is a global provider of software as a service (“SaaS”), engineering services, and hardware for Edge Computing, the Internet of Things (“IoT”), and Remote Environment Management (“REM”). Lantronix enables its customers to provide reliable and secure solutions while accelerating their time to market. Our products and services dramatically simplify operations through the creation, development, deployment, and management of customer projects at scale while providing quality, reliability and security.

   

Basis of Presentation

 

The accompanying unaudited condensed consolidated financial statements of Lantronix have been prepared in accordance with United States generally accepted accounting principles (“U.S. GAAP”) for interim financial information and in accordance with the instructions to Form 10-Q and Article 8 of Securities and Exchange Commission (“SEC”) Regulation S-X. Accordingly, they should be read in conjunction with the audited consolidated financial statements and notes thereto for the fiscal year ended June 30, 2020, included in our Annual Report on Form 10-K for the fiscal year ended June 30, 2020, which was filed with the SEC on September 11, 2020. The unaudited condensed consolidated financial statements contain all normal recurring accruals and adjustments that in the opinion of management, are necessary to present fairly the consolidated financial position of Lantronix at September 30, 2020, the consolidated results of our operations for the three months ended September 30, 2020 and our consolidated cash flows for the three months ended September 30, 2020. All intercompany accounts and transactions have been eliminated.

 

Use of Estimates

 

The preparation of condensed consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the condensed consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Accounting measurements at interim dates inherently involve greater reliance on estimates than at year-end. The inputs into certain of these estimates and assumptions include the consideration of the economic impact of the COVID-19 pandemic. Actual results could differ materially from these estimates, and such differences could affect the results of operations reported in future periods. As the extent to which the COVID-19 pandemic impacts our business, operations and financial results continues to develop, many of these estimates could require increased judgement and carry a higher degree of variability and volatility, and may change materially in future periods.

 

The results of operations for the three months ended September 30, 2020 are not necessarily indicative of the results to be expected for the full year or any future interim periods.

  

Reclassifications

 

Certain reclassifications have been made to the prior fiscal year financial information to conform with the current fiscal year presentation.

 

 

 

 8 

 

 

Recent Accounting Pronouncements

   

Current Expected Credit Losses

 

In June 2016, the Financial Accounting Standards Board (“FASB”) issued a new standard requiring financial assets measured at amortized cost be presented at the net amount expected to be collected, through an allowance for credit losses that is deducted from the amortized cost basis. The standard eliminates the threshold for initial recognition in current U.S. GAAP and reflects an entity’s current estimate of all expected credit losses. The measurement of expected credit losses is based on historical experience, current conditions, and reasonable and supportable forecasts that affect the collectability of the financial assets. The standard is effective for Lantronix beginning in the first quarter of our fiscal year 2024. The adoption of this guidance is not expected to have a material effect on our consolidated financial statements.

 

2. Revenue

 

Revenue is recognized upon the transfer of control of promised products or services to customers in an amount that reflects the consideration we expect to receive in exchange for those products or services. We apply the following five-step approach in determining the amount and timing of revenue to be recognized: (i) identifying the contract with a customer, (ii) identifying the performance obligations in the contract, (iii) determining the transaction price, (iv) allocating the transaction price to the performance obligations in the contract and (v) recognizing revenue when the performance obligation is satisfied. On occasion we enter into contracts that can include various combinations of products and services, which are generally capable of being distinct and accounted for as separate performance obligations.

 

Revenue is recognized net of (i) any taxes collected from customers, which are subsequently remitted to governmental authorities and (ii) shipping and handling costs collected from customers.

 

Products

 

Most of our product revenue is recognized as a distinct single performance obligation when products are tendered to a carrier for delivery, which represents the point in time that our customer obtains control of the promised products. A smaller portion of our product revenue is recognized when our customer receives delivery of the promised products.

  

A significant portion of our products are sold to distributors under agreements which contain (i) limited rights to return unsold products and (ii) price adjustment provisions, both of which are accounted for as variable consideration when estimating the amount of revenue to recognize. We base our estimates for returns and price adjustments primarily on historical experience; however, we also consider contractual allowances, approved pricing adjustments and other known or anticipated returns and price adjustments in a given period. Such estimates are generally made at the time of shipment to the customer and updated at the end of each reporting period as additional information becomes available and only to the extent that it is probable that a significant reversal of any incremental revenue will not occur. Our estimates of accrued variable consideration are included in other current liabilities in the accompanying condensed consolidated balance sheets.

 

Services

 

Revenues from our extended warranty and related services are generally recognized ratably over the applicable service period. Although not significant to date, revenues from sales of our SaaS solutions are recognized ratably over the applicable service period as well. Revenues from professional engineering services are generally recognized as services are performed.

 

 

 

 9 

 

 

We derive a portion of our revenues from engineering and related consulting service contracts with customers. These contracts generally include performance obligations in which control is transferred over time because the customer either simultaneously receives and consumes the benefits provided or our performance on the contract creates or enhances an asset that the customer controls. These contracts typically provide services on the following basis:

 

  · Time & Materials (“T&M”) – services consist of revenues from software modification, consulting implementation, training and integration services. These services are set forth separately in the contractual arrangements such that the total price of the customer arrangement is expected to vary depending on the actual time and materials incurred based on the customer’s needs.

 

  · Fixed Price – arrangements to render specific consulting and software modification services which tend to be more complex.

 

Performance obligations for T&M contracts qualify for the "Right to Invoice" practical expedient within the revenue guidance. Under this practical expedient, we may recognize revenue, over time, in the amount to which we have a right to invoice. In addition, we are not required to estimate variable consideration upon inception of the contract and reassess the estimate each reporting period. We have determined that this method best represents the transfer of services as, upon billing, we have a right to consideration from a customer in an amount that directly corresponds with the value to the customer of our performance completed to date.

 

We recognize revenue on fixed price contracts, over time, using the proportion of our actual costs incurred (generally labor hours expended) to the total costs expected to complete the contract performance obligation. We determined that this method best represents the transfer of services as the proportion closely depicts the efforts or inputs completed towards the satisfaction of a fixed price contract performance obligation.

 

Multiple Performance Obligations

 

From time to time, we may enter into contracts with customers that include promises to transfer multiple deliverables that may include sales of products, professional engineering services and other product qualification or certification services. Determining whether the deliverables in such arrangements are considered distinct performance obligations that should be accounted for separately versus together often requires judgment. We consider performance obligations to be distinct when the customer can benefit from the promised good or service on its own or by combining it with other resources readily available and when the promised good or service is separately identifiable from other promised goods or services in the contract. In such arrangements, we allocate revenue on a relative standalone selling price basis by maximizing the use of observable inputs to determine the standalone selling price for each performance obligation.

  

Net Revenue by Product Line and Geographic Region

 

We organize our products and solutions into three product lines: IoT, REM and Other. Our IoT products typically connect to one or more existing machines or are built into new industrial devices to provide network connectivity. Our REM product line includes out-of-band management, console management, power management, and IP connected keyboard-video-mouse (commonly referred to as “IPKVM”) products that provide remote access to Information Technology (“IT”) and networking infrastructure deployed in test labs, data centers, branch offices and server rooms. We categorize products that are non-focus or end-of-life as Other.

  

We conduct our business globally and manage our sales teams by three geographic regions: the Americas; Europe, Middle East, and Africa (“EMEA”); and Asia Pacific Japan (“APJ”).

 

 

 

 10 

 

 

The following tables present our net revenue by product line and by geographic region. Net revenues by geographic region are based on the “bill-to” location of our customers:

 

   Three Months Ended September 30, 
   2020   2019 
   (In thousands) 
IoT  $14,620   $10,221 
REM   2,402    2,301 
Other   124    219 
   $17,146   $12,741 

 

   Three Months Ended September 30, 
   2020   2019 
   (In thousands) 
Americas  $10,929   $5,764 
EMEA   2,639    4,521 
Asia Pacific Japan   3,578    2,456 
   $17,146   $12,741 

 

The following table presents product revenues and service revenues as a percentage of our total net revenue:

 

   Three Months Ended September 30, 
   2020   2019 
           
Product revenues   94%    99% 
Service revenues   6%    1% 

 

Service revenue is comprised primarily of professional services, software license subscriptions, and extended warranties.

  

Contract Balances

 

In certain instances, the timing of revenue recognition may differ from the timing of invoicing to our customers. We record a contract asset receivable when revenue is recognized prior to invoicing, and a contract or deferred revenue liability when revenue is recognized subsequent to invoicing. With respect to product shipments, we expect to fulfill contract obligations within one year and so we have elected not to separately disclose the amount nor the timing of recognition of these remaining performance obligations. For contract balances related to contracts that include services and multiple performance obligations, refer to the deferred revenue discussion below.

  

Deferred Revenue

 

Deferred revenue is primarily comprised of unearned revenue related to our extended warranty services and certain software services. These services are generally invoiced at the beginning of the contract period and revenue is recognized ratably over the service period. Current and non-current deferred revenue balances represent revenue allocated to the remaining unsatisfied performance obligations at the end of a reporting period and are respectively included in other current liabilities and other non-current liabilities in the accompanying unaudited condensed consolidated balance sheets.

 

 

 

 11 

 

 

The following table presents the changes in our deferred revenue balance for the three months ended September 30, 2020 (in thousands):

 

Balance, June 30, 2020  $1,460 
New performance obligations   134 
Recognition of revenue as a result of satisfying performance obligations   (704)
Balance, September 30, 2020  $890 
Less: non-current portion of deferred revenue   (166)
Current portion, September 30, 2020  $724 

 

We currently expect to recognize substantially all of the non-current portion of deferred revenue over the next 2 to 4 years.

  

3. Supplemental Financial Information

 

Inventories

 

Inventories are stated at the lower of cost (first-in, first-out) or net realizable value and consist of the following:

 

   September 30,   June 30, 
   2020   2020 
   (In thousands) 
Finished goods  $6,995   $7,522 
Raw materials   6,893    6,259 
Inventories, net  $13,888   $13,781 

 

Other Liabilities

 

The following table presents details of our other liabilities:

 

   September 30,   June 30, 
   2020   2020 
   (In thousands) 
Current        
Accrued variable consideration  $1,395   $1,462 
Customer deposits and refunds   631    628 
Accrued raw materials purchases   103    272 
Deferred revenue   724    658 
Lease liability   1,285    1,273 
Taxes payable   369    395 
Warranty reserve   164    181 
Accrued operating expenses   1,668    1,439 
Total other current liabilities  $6,339   $6,308 
           
Non-current          
Lease liability  $1,474   $1,796 
Deferred revenue   166    166 
Total other non-current liabilities  $1,640   $1,962 

 

 

 

 12 

 

 

Computation of Net Loss per Share

 

Basic and diluted net loss per share is calculated by dividing net loss by the weighted-average number of common shares outstanding during the applicable period.

 

The following table presents the computation of net loss per share:

 

   Three Months Ended 
   September 30, 
   2020   2019 
   (In thousands, except per share data) 
Numerator:        
Net loss  $(302)  $(2,470)
Denominator:          
Weighted-average common shares outstanding - basic and diluted   28,371    22,913 
           
Net loss per share - basic and diluted  $(0.01)  $(0.11)

 

The following table presents the common stock equivalents excluded from the diluted net loss per share calculation, because they were anti-dilutive for the periods presented. These excluded common stock equivalents could be dilutive in the future.

 

   Three Months Ended 
   September 30, 
   2020   2019 
   (In thousands) 
Common stock equivalents   896    1,769 

 

Purchased Intangible Assets

 

The following table presents details of purchased intangible assets:

 

   September 30, 2020   June 30, 2020 
   Gross Carrying Amount   Accumulated Amortization   Net Book Value   Gross Carrying Amount   Accumulated Amortization   Net Book Value 
   (In thousands) 
Developed technology  $3,841   $(685)  $3,156   $3,841   $(497)  $3,344 
Customer relationship   9,030    (1,113)   7,917    9,030    (726)   8,304 
Order backlog   840    (535)   305    840    (384)   456 
Non-compete agreements   400    (280)   120    400    (184)   216 
Trademark and trade name   375    (306)   69    375    (246)   129 
   $14,486   $(2,919)  $11,567   $14,486   $(2,037)  $12,449 

 

 

 

 13 

 

 

We do not currently have any purchased intangible assets with indefinite useful lives.

 

As of September 30, 2020, future estimated amortization expense is as follows:

 

Years Ending June 30,          
(In thousands)     
2021 (remainder)  $2,212 
2022   2,240 
2023   2,240 
2024   2,240 
2025   1,784 
Thereafter   851 
   $11,567 

 

Restructuring, Severance and Related Charges

 

The following table presents details of the liability we recorded related to restructuring, severance and related activities:

 

   Three Months Ended 
   September 30, 
   2020 
    (In thousands) 
Beginning balance  $615 
Charges   92 
Payments   (682)
Ending balance  $25 

 

The ending balance is recorded in accrued payroll and related expenses in the accompanying unaudited condensed consolidated balance sheet at September 30, 2020.

 

Prior Fiscal Year

 

During the three months ended September 30, 2019, we continued to execute on a plan to realign certain personnel resources to better fit our current business needs, primarily related to cost savings and synergies gained from the acquisition of Maestro Wireless Solutions Limited and its subsidiaries (together, “Maestro”). These activities resulted in a total charge of approximately $749,000.

 

 

 

 14 

 

 

Supplemental Cash Flow Information

 

The following table presents non-cash investing transactions excluded from the accompanying unaudited condensed consolidated statements of cash flows:

 

   Three Months Ended 
   September 30, 
   2020   2019 
   (In thousands) 
Accrued property and equipment paid for in the subsequent period  $76   $83 

 

4. Warranty Reserve

 

The standard warranty periods we provide for our products typically range from one to five years. We establish reserves for estimated product warranty costs at the time revenue is recognized based upon our historical warranty experience, and for any known or anticipated product warranty issues.

   

The following table presents details of our warranty reserve, which is included in other current liabilities in the unaudited condensed consolidated balance sheet:

 

   Three Months Ended   Year Ended 
   September 30,   June 30, 
   2020   2020 
   (In thousands) 
Beginning balance  $181   $116 
Warranty reserve assumed from acquisition of Intrinsyc       118 
Charged to cost of revenue   102    181 
Usage   (119)   (234)
Ending balance  $164   $181 

 

5. Bank Loan Agreements

 

In November 2019, we entered into a Second Amended and Restated Loan and Security Agreement (“Amended Agreement”) with Silicon Valley Bank (“SVB”), which amended, restated and superseded our previous agreement with SVB in its entirety.

 

Pursuant to the Amended Agreement, SVB made available to us a senior secured revolving line of credit of up to $6,000,000 (“Revolving Facility”) and a senior secured term loan of $6,000,000 (“Term Loan Facility”). Advances under the Revolving Facility may be borrowed from time to time prior to November 12, 2021, subject to the satisfaction of certain conditions, and may be used to fund our working capital and general business requirements. The $6,000,000 proceeds of the Term Loan Facility were drawn in full in November 2019 and were used to fund our acquisition of Intrinsyc Technologies Corporation, which occurred in January 2020. The Revolving Facility matures on November 12, 2021. There were no borrowings on the Revolving Facility at September 30, 2020. The Term Loan Facility is repayable over a 48-month period, which commenced in January 2020.

 

 

 

 15 

 

 

The interest rate on the Revolving Facility floats at a rate per annum equal to the greater of the prime rate and 5.00 percent. The interest rate on the Term Loan Facility floats at a rate per annum equal to the greater of 1.00 percent above the prime rate and 6.00 percent. We may elect to repay and reborrow the amounts outstanding under the Revolving Facility at any time prior to the maturity date of the Revolving Facility without premium or penalty. We may elect to repay the Term Loan Facility at any time without premium or penalty in minimum amounts equal to at least $1,000,000. A commitment fee in the amount of $60,000 was paid to SVB on the closing date and a $10,000 anniversary fee is payable to SVB on the earliest to occur of the one year anniversary of the effective date, the termination of the Amended Agreement or the Revolving Facility, or the occurrence of an event of default.

 

The following table summarizes our outstanding debt:

 

 

   September 30,   June 30, 
   2020   2020 
   (In thousands) 
Outstanding borrowings on Term Loan Facility  $4,875    5,250 
Less: Unamortized debt issuance costs   (89)   (96)
Net Carrying amount of debt   4,786    5,154 
Less: Current portion   (1,472)   (1,472)
Non-current portion  $3,314    3,682 

 

During the three months ended September 30, 2020 we recognized $86,000 of interest expense in the accompanying unaudited condensed consolidated statement of operations related to interest and amortization of debt issuance associated with the outstanding Term Loan Facility.

 

The Amended Agreement includes a financial covenant that requires that we maintain a minimum cash balance of $3,000,000 at SVB, as measured at the end of each month. The Amended Agreement also requires that we do not exceed a maximum leverage ratio, calculated as the ratio of funded debt to the consolidated trailing 12 month earnings before interest, taxes, depreciation and amortization, and certain other allowable exclusions of (i) 3.0 to 1.0 for each calendar quarter ending December 31, 2019 through and including December 31, 2020, (ii) 2.5 to 1.0 for each calendar quarter ending March 31, 2021 through and including December 31, 2021, and (iii) 2.0 to 1.0 for each calendar quarter ending after January 1, 2022. We are currently in compliance with all financial covenants.

 

6. Stockholders’ Equity

 

Stock Incentive Plans

 

Our stock incentive plans permit the granting of stock options (both incentive and nonqualified stock options), restricted stock units (“RSUs”), stock appreciation rights, non-vested stock, and performance share units (“PSUs”) to certain employees, directors and consultants. As of September 30, 2020, no stock appreciation rights or non-vested stock was outstanding.

 

 

 

 16 

 

 

Stock Options

 

The following table presents a summary of activity during the three months ended September 30, 2020 with respect to our stock options:

 

       Weighted- 
       Average 
   Number of   Exercise Price 
   Shares   per Share 
    (In thousands)      
Balance of options outstanding at June 30, 2020   2,055   $2.72 
Forfeited   (32)   1.70 
Expired   (4)   0.62 
Exercised   (199)   1.83 
Balance of options outstanding at September 30, 2020   1,820   $2.83 

 

Restricted Stock Units

 

The following table presents a summary of activity during the three months ended September 30, 2020 with respect to our RSUs:

 

       Weighted- 
       Average 
       Grant Date 
   Number of   Fair Value 
   Shares   per Share 
    (In thousands)      
Balance of RSUs outstanding at June 30, 2020   927   $3.93 
Granted   215    4.71 
Vested   (89)   3.38 
Forfeited   (14)   2.80 
Balance of RSUs outstanding at September 30, 2020   1,039   $4.05 

 

 

 

 17 

 

 

Performance Stock Units

 

The following table presents a summary of activity during the three months ended September 30, 2020 with respect to our PSUs:

 

   Number of Shares 
    (In thousands) 
Balance of PSUs outstanding at June 30, 2020   985 
Forfeited   (115)
Vested   (201)
Balance of PSUs outstanding at September 30, 2020   669 

 

Employee Stock Purchase Plan

 

Our 2013 Employee Stock Purchase Plan (“ESPP”) is intended to provide employees with an opportunity to purchase our common stock through accumulated payroll deductions at the end of a specified purchase period. Each of our employees (including officers) is eligible to participate in our ESPP, subject to certain limitations as set forth in our ESPP.

   

The following table presents a summary of activity during the three months ended September 30, 2020 under our ESPP:

 

   Number of 
   Shares 
    (In thousands) 
Shares available for issuance at June 30, 2020   404 
Shares issued    
Shares available for issuance at September 30, 2020   404 

 

Share-Based Compensation Expense

 

The following table presents a summary of share-based compensation expense included in each functional line item on our accompanying unaudited condensed consolidated statements of operations:

 

   Three Months Ended 
   September 30, 
   2020   2019 
   (In thousands) 
Cost of revenue  $58   $24 
Selling, general and administrative   445    459 
Research and development   100    95 
Total share-based compensation expense  $603   $578 

 

 

 

 18 

 

 

The following table presents the remaining unrecognized share-based compensation expense related to our outstanding share-based awards as of September 30, 2020:

 

         
   Remaining   Remaining 
   Unrecognized   Weighted- 
   Compensation   Average Years 
   Expense   To Recognize 
    (In thousands)      
Stock options  $1,125    2.3 
RSUs   3,795    3.3 
PSUs   471    1.8 
Stock purchase rights under ESPP   49    0.1 
   $5,440      

 

If there are any modifications or cancellations of the underlying unvested share-based awards, we may be required to accelerate, increase or cancel remaining unearned share-based compensation expense. Future share-based compensation expense and unearned share-based compensation will increase to the extent that we grant additional share-based awards.

  

7. Income Taxes

 

We utilize the liability method of accounting for income taxes. The following table presents our effective tax rates based upon our provision for income taxes for the periods shown:

 

   Three Months Ended 
   September 30, 
   2020   2019 
Effective tax rate   20%    2% 

 

The difference between our effective tax rates in the periods presented above and the federal statutory rate is primarily due to a tax benefit from our domestic losses being recorded with a full valuation allowance, as well as the effect of foreign earnings taxed at rates differing from the federal statutory rate.

 

We record net deferred tax assets to the extent we believe it is more likely than not that these assets will be realized. Due to our cumulative losses and uncertainty of generating future taxable income, we have provided a full valuation allowance against our net deferred tax assets as of September 30, 2020 and June 30, 2020.

 

8. Commitments and Contingencies

 

From time to time, we are involved in various legal proceedings and claims arising in the ordinary course of our business. Although the results of legal proceedings and claims cannot be predicted with certainty, we currently believe that the final outcome of these ordinary course matters will not, individually or in the aggregate, have a material adverse effect on our business, operating results, financial condition or cash flows. However, regardless of the outcome, litigation can have an adverse impact on us because of legal costs, diversion of management time and resources, and other factors.

 

 

  

 

 19 

 

 

Item 2.   Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion and analysis of our financial condition and results of operations should be read together with our unaudited condensed consolidated financial statements and the related notes included in Part I, Item 1 of this Quarterly Report on Form 10-Q for the three months ended September 30, 2020, or this Report. This discussion and analysis contains forward-looking statements that are based on our current expectations and reflect our plans, estimates and anticipated future financial performance. See the section of this Report entitled “Cautionary Note Regarding Forward-Looking Statements” for additional information. These statements involve numerous risks and uncertainties. Our actual results may differ materially from those expressed or implied by these forward-looking statements as a result of many factors, including those set forth in “Risk Factors” in Part II, Item 1A of this Report.

 

Overview

 

Lantronix, Inc., which we refer to herein as the Company, Lantronix, we, our, or us, is a global provider of software as a service (“SaaS”), engineering services, and hardware for Edge Computing, the Internet of Things (“IoT”), and Remote Environment Management (“REM”). We enable our customers to provide reliable and secure solutions while accelerating their time to market. Our products and services dramatically simplify operations through the creation, development, deployment, and management of customer projects at scale while providing quality, reliability and security.

 

We conduct our business globally and manage our sales teams by three geographic regions: the Americas; Europe, Middle East, and Africa (“EMEA”); and Asia Pacific Japan (“APJ”).

  

Products and Solutions Overview

 

We organize our products and solutions into three product lines: IoT, REM and Other.

 

IoT

 

IoT Connectivity

 

Our IoT connectivity products typically connect to one or more existing machines or are built into new industrial devices to provide network connectivity. Our products are designed to enhance the value and utility of machines by making the data from the machines available to users, systems and processes or by controlling their properties and features over the network. Our IoT connectivity products may be embedded into new designs or attached to existing machines. These products include wired and wireless connections that enhance the value and utility of modern electronic systems and equipment by providing secure network connectivity, application hosting, protocol conversion, secure access for distributed IoT deployments and many other functions. Many of the products are offered with software tools intended to further accelerate our customer’s time-to-market and increase their value add. Most of our IoT connectivity products are pre-certified in a number of countries thereby significantly reducing our original equipment manufacturer (“OEM”) customers’ regulatory certification costs and accelerating their time to market.

 

IoT Compute

 

Our IoT compute products typically are embedded into a customer product, enabling advanced application functionality at the edge. Our products are designed to deliver advanced functionality and reduce time to market by leveraging our engineering expertise, engineering services, manufacturing experience, and strategic System on Chip (“SoC”) partners. Our compute products are normally embedded into new designs. These products include application processing that delivers compute to meet customer needs for data transformation, computer vision, machine learning, augmented / virtual reality, audio / video aggregation and distribution, and custom applications at the edge. Many of the products are offered with software tools intended to further accelerate our customer’s time-to-market and increase their value add. Most of our IoT compute products are pre-certified in a number of countries thereby significantly reducing our OEM customers’ regulatory certification costs and accelerating their time to market.

 

 

 

 20 

 

 

IoT Telematics

 

Our IoT telematics products are typically integrated into an OEM’s or System Integrator’s (“SI”) products. Our smart tracking devices are designed to deliver robust data logging and positional tracking functionality and reliability for supply chain and logistics solutions. Our telematics devices are designed to be flexible in the field and offer a variety of connectivity options to suit the customers’ needs across 2G, 3G, 4G, and LTE cellular networks. These power efficient products are designed to support communications across interfaces and industrial protocols for vehicle, fleet, and asset tracking and management. Many of the products are offered with software tools intended to further accelerate our customers’ time-to-market and increase their value add. Most of our IoT Telematics products are pre-certified in a number of countries thereby significantly reducing our OEM customers’ regulatory certification costs and accelerating their time to market.

 

Engineering Services

 

We leverage our engineering expertise and product development best practices to deliver high quality, innovative products, cost-effectively and on time. Our engineering services flexible business model allows for choosing turnkey product development or team augmentation for accelerating complex areas of product development such as; camera development and tuning, voice control, machine learning, artificial intelligence, computer vision, augmented / virtual reality, mechanical and radio-frequency design, thermal and power optimization, or in any specific area a customer needs assistance.

 

In addition to our production-ready edge computing solutions, we offer experienced multidisciplinary engineering services across complete aspects of IoT product development, including hardware engineering, software engineering, mechanical engineering, rapid prototyping, and quality assurance.

  

Software as a Service

 

Our SaaS platform provides single pane of glass management for IoT deployments. Our platform enables customers to easily deploy, monitor, manage, and automate across their global deployments, all from a single platform login. OEMs and SIs can leverage its multitenancy functionality for supporting a wide customer base while ensuring customer separation. Over the Air (“OTA”) updates make it easy to ensure the latest security patches, firmware, and configurations are deployed and functional.

 

The following product families are included in our IoT product line: EDS, EDS-MD, PremierWave® EN, PremierWave® XC, SGX™, UDS, WiPort®, xDirect®, xPico®, xPico® Wi-Fi, xPress™, XPort®, XPort® Pro, MicroM110, E210, E220, Bolero45, FOX3-2G, FOX3-3G, FOX3-4G, S40, and D2Sphere. In addition, we offer System on Module (“SoM”), Single Board Computer (“SBC”), and Development Kits. We also offer services for mechanical, hardware, and software engineering for camera, audio, and artificial intelligence / machine learning development.

 

REM

 

Today, organizations are managing an ever-increasing number of devices and data on enterprise networks where 24/7 reliability is mission critical. Remote environment management allows for full comprehension and control of an IT deployment, across a range of sensors data (temperature, humidity, light, acceleration, open / close, etc.) providing status and alerting, automation, and remote control of devices and end stations. REM designs may be part of an out of band (“OOB”) or in band network design. OOB is a technique that uses a dedicated management network to access critical infrastructure components to ensure production independent management connectivity. REM allows organizations to effectively monitor, manage, and control their enterprise IT equipment and facilities (environments), either in or out of band, optimizing their IT support resources.

 

 

 

 21 

 

 

Our SaaS platform provides single pane of glass management for REM (and IoT) deployments. Our platform enables customers to easily deploy, monitor, manage, and automate across their global deployments, all from a single platform login, virtually connected as though directly on each device. Our platform eliminates the need to have 24/7 personnel on site, and makes it easy to see and drill into an issue quickly, even in large scale deployments.

 

Our REM product line includes out-of-band management, console management, power management, and IP connected keyboard-video-mouse (commonly referred to as “IPKVM”) products that provide remote access to IT and networking infrastructure deployed in test labs, data centers, branch offices, remote sites, and server rooms.

 

The following product families are included in our REM product line: SLB, SLC8000, Spider, ConsoleFlow, and EMG 8500.

 

Other

 

We categorize products that are non-focus or end-of-life as Other. Our Other product line includes non-focus products such as the xPrintServer®. In addition, this product line includes end-of-life versions of our MatchPort®, SLC, SLP, xPress Pro, xSenso®, PremierWave® XN, and WiBox product families.

 

Recent Developments

  

COVID-19 Update

  

In response to the ongoing COVID-19 pandemic, we have taken measures to protect our employee population and comply with local directives. Most of our employees transitioned to remote working arrangements commencing in March 2020, which are continuing through the date hereof. We continue to monitor the implications of the COVID-19 pandemic on our business, as well as our customers’ and suppliers’ businesses.

 

Our efforts to support customer engagement through industry events, trade shows and business travel also continue to be negatively affected. Prolonged shutdowns, or additional future shutdowns and other restrictions instituted by federal, state and local governments, will likely lead to a reduction in revenue during the coming quarters. To mitigate potential revenue declines, we continue to adjust our go-to-market approach by adding more distributors and value-added resellers, who are closer to the customers and end-customers.

 

Our supply chain still faces challenges, as most of our manufacturing is performed in Malaysia, Thailand and China. Our contract manufacturers may experience capacity shortages if future shutdowns are implemented, although as of the date of this Report we are not aware of any issues.

 

Overall, in light of the changing nature and continuing uncertainty around the COVID-19 pandemic, our ability to predict the full impact of the COVID-19 pandemic on our business in future periods remains limited. The full effect of the pandemic on our business is unlikely to be fully realized, or reflected in our financial results, until future periods.

 

Recent Accounting Pronouncements

 

Refer to Note 1 of Notes to Unaudited Condensed Consolidated Financial Statements, included in Part I, Item 1 of this Report, which is incorporated herein by reference, for a discussion of recent accounting pronouncements.

 

 

 

 22 

 

 

Critical Accounting Policies and Estimates

 

The accounting policies that have the greatest impact on our financial condition and results of operations and that require the most judgment are those relating to revenue recognition, allowance for doubtful accounts, inventory valuation, warranty reserves, restructuring charges, valuation of deferred income taxes, business combinations, goodwill and intangible assets and stock-based compensation. These policies are described in further detail in the Form 10-K and have not changed significantly during the three months ended September 30, 2020 as compared to what was previously disclosed in the Form 10-K.

   

Results of Operations – Three Months Ended September 30, 2020 Compared to the Three Months Ended September 30, 2019

 

Summary

 

In the three months ended September 30, 2020, our net revenue increased by $4,405,000, or 34.6%, compared to the three months ended September 30, 2019. The increase in net revenue was driven by a 43.0% increase in net revenue in our IoT product line, as well as an increase of 4.4% in net revenues in our REM product line. We had a net loss of $302,000 for the three months ended September 30, 2020 compared to a net loss of $2,470,000 for the three months ended September 30, 2019. The decrease in net loss was driven by a 33.0% increase in gross profit and a 2.1% decrease in operating expenses.

 

Net Revenue

 

The following tables present our net revenue by product line and by geographic region:

 

   Three Months Ended September 30,         
       % of Net       % of Net   Change 
   2020   Revenue   2019   Revenue   $   % 
   (In thousands, except percentages) 
IoT  $14,620    85.3%   $10,221    80.2%   $4,399    43.0% 
REM   2,402    14.0%    2,301    18.1%    101    4.4% 
Other   124    0.7%    219    1.7%    (95)   (43.4%)
   $17,146    100.0%   $12,741    100.0%   $4,405    34.6% 

 

   Three Months Ended September 30,         
       % of Net       % of Net   Change 
   2020   Revenue   2019   Revenue   $   % 
   (In thousands, except percentages) 
Americas  $10,929    63.7%   $5,764    45.2%   $5,165    89.6% 
EMEA   2,639    15.4%    4,521    35.5%    (1,882)   (41.6%)
Asia Pacific Japan   3,578    20.9%    2,456    19.3%    1,122    45.7% 
   $17,146    100.0%   $12,741    100.0%   $4,405    34.6% 

 

 

 

 23 

 

 

IoT

 

Net revenue from our IoT product line for the three months ended September 30, 2020 increased in the Americas and APJ regions when compared to the three months ended September 30, 2019 due primarily to the addition of sales of products and services obtained through the acquisition of Intrinsyc Technologies Corporation (“Intrinsyc”). We also saw smaller increases in sales of (i) our XPort product family in the Americas region, (ii) our WiPort product family in the APJ region and (iii) our SGX product family, mostly in the Americas region. The overall increase in net revenues was partially offset by the exit of a low margin distribution business assumed in the acquisition of Maestro Wireless Solutions Limited and its subsidiaries (together, “Maestro”), various decreases in unit sales of some of our cellular and tracker products, as well as certain legacy product families, particularly in the EMEA region.

 

REM

 

Net revenue from our REM product line for the three months ended September 30, 2020 increased compared to the three months ended September 30, 2019 due primarily to increased unit sales of our SLC8000 product family across all regions, largely in the Americas. This was partially offset by a decrease in unit sales of our SLS product family in the EMEA region.

 

Other

 

Net revenue from our Other products, which are comprised of non-focus and end-of-life product families, declined slightly in all regions.

 

Gross Profit

 

Gross profit represents net revenue less cost of revenue. Cost of revenue consists primarily of the cost of raw material components, subcontract labor assembly from contract manufacturers, direct and indirect personnel expenses related to professional services, manufacturing overhead, inventory reserves for excess and obsolete products or raw materials, warranty costs, royalties and share-based compensation.

  

The following table presents our gross profit:

 

   Three Months Ended September 30,         
       % of Net       % of Net   Change 
   2020   Revenue   2019   Revenue   $   % 
   (In thousands, except percentages) 
Gross profit  $8,239    48.1%   $6,195    48.6%   $2,044    33.0% 

 

Gross profit as a percent of revenue (referred to as “gross margin”) for the three months ended September 30, 2020 decreased compared to the three months ended September 30, 2019 due primarily to sales of products obtained through the acquisition of Intrinsyc, which typically have lower margins than the Lantronix products that existed prior to the acquisition.

 

 

 

 24 

 

 

Selling, General and Administrative

 

Selling, general and administrative expenses consist of personnel-related expenses, including salaries and commissions, share-based compensation, facility expenses, information technology, trade show expenses, advertising, and legal and accounting fees.

  

The following table presents our selling, general and administrative expenses:

 

   Three Months Ended September 30,         
       % of Net       % of Net   Change 
   2020   Revenue   2019   Revenue   $   % 
   (In thousands, except percentages) 
Personnel-related expenses  $3,179        $2,829        $350    12.4% 
Professional fees and outside services   588         507         81    16.0% 
Advertising and marketing   190         169         21    12.4% 
Facilities and insurance   382         310         72    23.2% 
Share-based compensation   445         459         (14)   (3.1%)
Depreciation   45         54         (9)   (16.7%)
Other   70         145         (75)   (51.7%)
Selling, general and administrative  $4,899    28.6%   $4,473    35.1%   $426    9.5% 

 

Selling, general and administrative expenses for the three months ended September 30, 2020 increased when compared to the three months ended September 30, 2019 primarily due to (i) higher personnel-related costs resulting from the increased headcount assumed in the acquisition of Intrinsyc and increased variable compensation costs, and (ii) higher professional fees and outside services resulting from increased legal costs.

 

Research and Development

 

Research and development expenses consist of personnel-related expenses, including share-based compensation, as well as expenditures to third-party vendors for research and development activities and product certification costs. Our quarterly costs related to outside services and product certifications vary from period to period depending on our level of development activities.

 

 

 

 25 

 

 

The following table presents our research and development expenses:

 

   Three Months Ended September 30,         
       % of Net       % of Net   Change 
   2020   Revenue   2019   Revenue   $   % 
   (In thousands, except percentages) 
Personnel-related expenses  $1,951        $1,762        $189    10.7% 
Facilities   266         265         1    0.4% 
Outside services   39         243         (204)   (84.0%)
Product certifications   66         170         (104)   (61.2%)
Share-based compensation   100         95         5    5.3% 
Other   150         86         64    74.4% 
Research and development  $2,572    15.0%   $2,621    20.6%   $(49)   (1.9%)

 

Research and development expenses for the three months ended September 30, 2020 decreased when compared to the three months ended September 30, 2019 primarily due to (i) lower outside services costs related to engineering consulting fees and (ii) lower product certification costs related to the timing of product development projects. These decreases were partially offset by an increase in personnel-related costs resulting from the increased headcount assumed in the acquisition of Intrinsyc and increased variable compensation costs.

 

Restructuring, Severance and Related Charges

 

During the three months ended September 30, 2020, we incurred charges of approximately $92,000 related to certain headcount reductions and restructuring of certain non-essential operations.

 

During the three months ended September 30, 2019, we executed on our plans to realign certain personnel resources to better fit our business needs, particularly related to cost savings and synergies from the acquisition of Maestro. These activities resulted in a total charge of approximately $749,000.

 

We may incur additional restructuring, severance and related charges in future periods as we continue to identify cost savings and synergies related to our acquisitions and general business operations.

 

Acquisition-Related Costs

 

During the three months ended September 30, 2019, we incurred approximately $643,000 of acquisition-related costs in connection with the acquisition of Maestro. These costs were mainly comprised of banking, legal and other professional fees.

 

Interest Income (Expense), Net

  

We earn interest on our domestic cash balance. For the three months ended September 30, 2020, we incurred net interest expense as a result of interest incurred on borrowings on our term loan.

 

 

 

 26 

 

 

Other Expense, Net

  

Other expense, net, is comprised primarily of foreign currency remeasurement and transaction adjustments related to our foreign subsidiaries whose functional currency is the U.S. dollar.

 

Provision for Income Taxes

 

Refer to Note 7 of Notes to Unaudited Condensed Consolidated Financial Statements, included in Part I, Item 1 of this Report, which is incorporated herein by reference, for a discussion regarding our provision for income taxes.

 

Liquidity and Capital Resources

 

Liquidity

 

The following table presents details of our working capital and cash and cash equivalents:

 

   September 30,   June 30,     
   2020   2020   Change 
   (In thousands) 
Working capital  $19,306   $18,741   $565 
Cash, cash equivalents, and restricted cash  $7,709   $7,691   $18 

 

Our principal sources of cash and liquidity include our existing cash and cash equivalents, borrowings and amounts available under our loan agreement with our bank, and cash generated from operations. We believe that these sources will be sufficient to fund our current requirements for working capital, capital expenditures and other financial commitments for at least the next 12 months. We anticipate that the primary factors affecting our cash and liquidity are net revenue, working capital requirements and capital expenditures.

 

Management defines cash and cash equivalents as highly liquid deposits with original maturities of 90 days or less when purchased. We maintain cash and cash equivalents balances at certain financial institutions in excess of amounts insured by federal agencies. Management does not believe this concentration subjects us to any unusual financial risk beyond the normal risk associated with commercial banking relationships. We frequently monitor the third-party depository institutions that hold our cash and cash equivalents. Our emphasis is primarily on safety of principal and secondarily on maximizing yield on those funds.

  

Our future working capital requirements will depend on many factors, including the following: timing and amount of our net revenue; our product mix and the resulting gross margins; research and development expenses; selling, general and administrative expenses; and expenses associated with any strategic partnerships, acquisitions or infrastructure investments.

   

From time to time, we may seek additional capital from public or private offerings of our capital stock, borrowings under our existing or future credit lines or other sources in order to (i) develop or enhance our products, (ii) take advantage of strategic opportunities, (iii) respond to competition or (iv) continue to operate our business. We currently have a Form S-3 shelf registration statement on file with the SEC. If we issue equity securities to raise additional funds, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. If we issue debt securities to raise additional funds, we may incur debt service obligations, become subject to additional restrictions that limit or restrict our ability to operate our business, or be required to further encumber our assets. There can be no assurance that we will be able to raise any such capital on terms acceptable to us, if at all.

 

 

 

 27 

 

 

COVID-19 Update

 

We have not experienced any material delays or payment defaults by our customers as a result of the COVID-19 pandemic. However, additional economic shutdowns or a prolonged economic recovery may lead to significant declines in billings and cash collection and result in an unfavorable impact on our financial results in future periods. While we do have a credit line available, financial covenants associated with the credit line may not enable us to draw down funds as needed. We have in place a contingency plan that significantly reduces operating costs in the event that we experience liquidity issues in order to help mitigate our liquidity risk.

  

Bank Loan Agreements

 

Refer to Note 5 of Notes to Unaudited Condensed Consolidated Financial Statements, included in Part I, Item 1 of this Report, which is incorporated herein by reference, for a discussion of our loan agreements.

 

Cash Flows

 

The following table presents the major components of the unaudited condensed consolidated statements of cash flows:

 

   Three Months Ended     
   September 30,     
   2020   2019   Change 
   (In thousands) 
Net cash provided by (used in) operating activities  $830   $(1,079)  $1,909 
Net cash used in investing activities   (113)   (5,191)   5,078 
Net cash provided by (used in) financing activities   (699)   16    (715)

 

Operating Activities

 

Cash provided by operating activities during the three months ended September 30, 2020 increased compared to the prior year period as a result of a decrease in our net loss, which was mainly driven by an increase in our revenues and gross profit. For the three months ended September 30, 2020, our net loss included $1,720,000 of non-cash charges, while the changes in operating assets and liabilities used net cash of $588,000.

 

Our net accounts receivable increased by $934,000, or 8.2%, from June 30, 2020 to September 30, 2020 primarily due to the timing of our net revenues, whereby a slightly larger portion of our sales during the three months ended September 30, 2020 were made near the end of the quarter as compared to the quarter ended June 30, 2020.

 

Accounts payable increased by $1,345,000, or 25.2%, from June 30, 2020 to September 30, 2020 primarily due to the timing of inventory purchases and related payments to vendors.

 

Investing Activities

 

We used significantly less cash in investing activities during the three months ended September 30, 2020 than the prior year period due to the acquisition of Maestro in the prior year. The cash used during the current year period was for the purchase of certain property and equipment.

 

 

 

 28 

 

 

Financing Activities

 

Net cash used in financing activities during the three months ended September 30, 2020 was primarily the result of (i) monthly repayments on our term loan and (ii) withholding taxes paid related to the vesting of restricted stock units.

 

Off-Balance Sheet Arrangements

 

As of September 30, 2020, we did not have any relationships with unconsolidated organizations or financial partnerships, including structured finance or special purpose entities, that have been established to facilitate off-balance sheet arrangements or for other purposes.

  

Item 3.   Quantitative and Qualitative Disclosures about Market Risk

 

As a smaller reporting company, we are not required to provide the information required by this Item 3.

 

Item 4.   Controls and Procedures

 

(a) Evaluation of Disclosure Controls and Procedures

 

We maintain disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) that are designed to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in SEC rules and forms and (ii) is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.

 

We carried out an evaluation, under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of the end of the period covered by this Report. Based upon that evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were effective as of September 30, 2020 at the reasonable assurance level.

   

(b) Changes in Internal Controls over Financial Reporting

 

There were no changes in our internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(f) and 15d-15(f) of the Exchange Act that occurred during the quarter ended September 30, 2020, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. Although we have modified our workplace practices globally due to the COVID-19 pandemic, resulting in most of our employees working remotely for approximately the last 9 months, this has not materially affected our internal controls over financial reporting. We continue to monitor and assess the COVID-19 situation on our internal controls to minimize the impact on their design and operating effectiveness.

  

(c) Inherent Limitation on Effectiveness of Controls

 

A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is also based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, controls may become inadequate because of changes in conditions, or the degree of compliance with policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. 

 

 

 

 29 

 

 

PART II. OTHER INFORMATION

 

Item 1.   Legal Proceedings

 

Refer to Note 8 of Notes to Unaudited Condensed Consolidated Financial Statements, included in Part I, Item 1 of this Report, which is incorporated herein by reference, for a discussion of legal proceedings.

 

Item 1A.   Risk Factors

 

We operate in a rapidly changing environment that involves numerous risks and uncertainties. Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described in this section, as well as other information contained in this Report and in our other filings with the SEC. This section should be read in conjunction with the unaudited condensed consolidated financial statements and accompanying notes thereto included in Item 1 of this Report, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in Item 2 of this Report. If any of these risks or uncertainties actually occurs, our business, financial condition, results of operations or prospects could be materially harmed. In that event, the market price for our common stock could decline and you could lose all or part of your investment. In addition, risks and uncertainties not presently known to us or that we currently deem immaterial may also adversely affect our business.

 

The risks and uncertainties discussed below update and supersede the risks and uncertainties previously disclosed in Part I, Item 1A of our Annual Report on Form 10-K for the fiscal year ended June 30, 2020, which was filed with the SEC on September 11, 2020.  There have been no material changes to the risks and uncertainties previously disclosed in such Annual Report on Form 10-K.

 

The effect of COVID-19 and other possible pandemics and similar outbreaks could result in material adverse effects on our business, financial position, results of operations and cash flows.

 

The COVID-19 outbreak has spread globally and has led governments and other authorities around the world, including federal, state and local authorities in the United States and abroad, to impose measures intended to reduce its spread, including restrictions on freedom of movement and business operations such as travel bans, border closings, business limitations and closures (subject to exceptions for essential operations and businesses), quarantines and shelter-in-place orders. Although many of these governmental restrictions have since been lifted or scaled back, a recent surge of COVID-19 resulted in the reimposition of certain restrictions and may lead to other restrictions being implemented in response to efforts to reduce the spread of COVID-19. Given the dynamic nature of these circumstances and the related adverse impact these restrictions have had, and may continue to have, on the economy generally, our business and the business of our suppliers, our results of operations and financial condition may be adversely impacted by the COVID-19 pandemic.

  

Beginning in March 2020, most of our employees transitioned to remote working arrangements, which are continuing through the date of this Report. While remote working has not had a significant adverse impact on our financial results or our operations to date, there can be no assurance that these arrangements will not ultimately result in lower work efficiency and productivity, which in turn may adversely affect our business. In addition, the COVID-19 pandemic has resulted in industry events, trade shows and business travel being suspended, cancelled and/or significantly curtailed. The cessation of trade shows and business travel has resulted in and could continue to result in our lead pipeline being negatively impacted, which has negatively affected and may continue to negatively affect our sales during fiscal 2021 and beyond.

 

 

 

 30 

 

 

In addition, the impact of the COVID-19 pandemic and measures to prevent its spread subject us to various risks and uncertainties that could materially adversely affect our business, results of operations and financial condition, including the following:

 

·   significant volatility or decreases in the demand for our products or extended sales cycles;
·   changes in customer behavior and preferences, as customers may experience financial difficulties and/or may delay orders or reduce their spending in light of COVID-19;
·   adverse impacts on our ability to distribute or deliver our products or services, including due to the negative impact of COVID-19 on air travel, as well as temporary disruptions, restrictions or closures of the facilities of our suppliers or customers and their contract manufacturers;
·   further disruptions in our ability to manufacture our products, as some suppliers of materials used in the production of our products are located in areas more severely impacted by COVID-19, which could limit our ability to obtain sufficient materials to produce our products; and
·   volatility in the availability of raw materials and components that our contract manufacturers purchase in China and volatility in raw material and other input costs.

 

The duration and extent of the COVID-19 pandemic’s effect on our operations and financial condition will depend on future developments, which are highly uncertain and cannot be predicted at this time, including new information which may emerge concerning the severity of COVID-19, actions taken to contain COVID-19, any future resurgence of COVID-19 that may occur after the initial outbreak subsidies, and how quickly and to what extent normal economic and operating conditions can resume. Even after the COVID-19 pandemic has subsided, we may experience adverse impacts to our business, financial condition, results of operations, and prospects as a result of its global economic impact, including any economic downturn or recession that has occurred or may occur in the future. The adverse impact of the COVID-19 pandemic on our business, results of operations and financial condition could be material.

 

Certain of our products are sold into mature markets, which could limit our ability to continue to generate revenue from these products. Our ability to sustain and grow our business depends on our ability to develop, market, and sell new products.

 

Certain of our products are sold into mature markets that are characterized by a trend of declining demand. As the overall market for these products decreases due to the adoption of new technologies, we expect that our revenues from these products will continue to decline. As a result, our future prospects will depend on our ability to develop and successfully market new products that address new and growing markets. Our failure to develop new products or failure to achieve widespread customer acceptance of any new products could cause us to lose market share and cause our revenues to decline. There can be no assurance that we will not experience difficulties that could delay or prevent the successful development, introduction, marketing and sale of new products or product enhancements. Factors that could cause delays include regulatory and/or industry approvals, product design cycle and failure to identify products or features that customers demand. In addition, the introduction and sale of new products often involves a significant technical evaluation, and we often face delays because of our customers’ internal procedures for evaluating, approving and deploying new technologies. For these and other reasons, the sales cycle associated with new products is typically lengthy, often lasting six to 24 months and sometimes longer. Therefore, there can be no assurance that our introduction or announcement of new product offerings will achieve any significant or sustainable degree of market acceptance or result in increased revenue in the near term.

  

Our new software offerings represent a new product line for us and are subject to the risks faced by a new business.

 

During the three months ended September 30, 2020, we continued to dedicate significant engineering resources to our management software platform, applications, and SaaS offerings, including ConsoleFlow™. Our management has limited experience in this marketplace. These product and service offerings will be subject to significant additional risks that are not necessarily related to our hardware products. Our ability to succeed with these offerings will depend in large part on our ability to provide customers with software products and services that offer features and functionality that address the needs of particular businesses. We may face challenges and delays in the development of this product line as the marketplace for products and services evolves to meet the needs and desires of customers. We cannot provide assurances that we will be successful in operating and growing this product line.

 

 

 

 31 

 

 

In light of these risks and uncertainties, we may not be able to establish or maintain market share for our software and SaaS offerings. As we develop new product lines, we must adapt to market conditions that are unfamiliar to us, such as competitors and distribution channels that are different from those we have known in the past. We have and will encounter competition from other solutions providers, many of whom may have more significant resources than us with which to compete. There can be no assurance that we will recover our investments in this new product line, that we will receive meaningful revenue from or realize a profit from this new product line or that diverting our management’s attention to this new product line will not have a material adverse effect on our existing business, and in turn on our results of operations, financial condition and prospects.

 

We may experience significant fluctuation in our revenue because the timing of large orders placed by some of our customers is often project-based.

 

Our operating results fluctuate because we often receive large orders from customers that coincide with the timing of the customer’s project. Sales of our products and services may be delayed if customers delay approval or commencement of projects due to budgetary constraints, internal acceptance review procedures, timing of budget cycles or timing of competitive evaluation processes. In addition, sometimes our customers make significant one-time hardware purchases for projects which are not repeated. We sell primarily on a purchase order basis rather than pursuant to long-term contracts, and we expect fluctuations in our revenues as a result of one-time project-based purchases to continue in the future. In addition, our sales may be subject to significant fluctuations based on the acceleration, delay or cancellation of customer projects, or our failure to complete one or a series of significant potential sales. Because a significant portion of our operating expenses are fixed, even a single order can have a disproportionate effect on our quarterly revenues and operating results. As a result of the factors discussed above, and due to the complexities of the industry in which we operate, it is difficult for us to forecast demand for our current or future products with any degree of certainty, which means it is difficult for us to forecast our sales. If our quarterly or annual operating results fall below the expectations of investors or securities analysts, the price of our common stock could decline substantially.

  

The lengthy sales cycle for our products and services, along with delays in customer completion of projects, make the timing of our revenues difficult to predict.

 

We have a lengthy sales cycle for many of our products that generally extends between six and 24 months and sometimes longer due to a lengthy customer evaluation and approval process. The length of this process can be affected by factors over which we have little or no control, including the customer’s budgetary constraints, timing of the customer’s budget cycles, and concerns by the customer about the introduction of new products by us or by our competitors. As a result, sales cycles for customer orders vary substantially among different customers. The lengthy sales cycle is one of the factors that has caused, and may continue to cause, our revenues and operating results to vary significantly from quarter to quarter. In addition, we may incur substantial expenses and devote significant management effort and expense to develop potential relationships that do not result in agreements or revenues, which may prevent us from pursuing other opportunities. Accordingly, excessive delays in sales could be material and adversely affect our business, financial condition or results of operations.

  

The nature of our products, customer base and sales channels causes us to lack visibility into future demand for our products, which makes it difficult for us to predict our revenues or operating results.

 

We use forecasts based on anticipated product orders to manage our manufacturing and inventory levels and other aspects of our business. However, several factors contribute to a lack of visibility with respect to future orders, including:

 

  · the lengthy and unpredictable sales cycle for our products that can extend from six to 24 months or longer;
  · the project-driven nature of many of our customers’ requirements;
  · we primarily sell our products indirectly through distributors;
  · the uncertainty of the extent and timing of market acceptance of our new products;
  · the need to obtain industry certifications or regulatory approval for our products;
  · the lack of long-term contracts with our customers;
  · the diversity of our product lines and geographic scope of our product distribution;
  · we have some customers who make single, non-recurring purchases; and
  · a large number of our customers typically purchase in small quantities.

 

 

 

 32 

 

 

This lack of visibility impacts our ability to forecast our inventory requirements. If we overestimate our customers’ future requirements for products, we may have excess inventory, which would increase our costs and potentially require us to write-off inventory that becomes obsolete. Additionally, if we underestimate our customers’ future requirements, we may have inadequate inventory, which could interrupt and delay delivery of our products to our customers, harm our reputation, and cause our revenues to decline. If any of these events occur, they could prevent us from achieving or sustaining profitability and the value of our common stock may decline.

 

We have a history of losses.

 

We have historically incurred net losses. There can be no assurance that we will generate net profits in future periods. Further, there can be no assurance that we will be cash flow positive in future periods. In the event that we fail to achieve profitability in future periods, the value of our common stock may decline. In addition, if we are unable to achieve or maintain positive cash flows, we would be required to seek additional funding, which may not be available on favorable terms, if at all.

 

Delays in qualifying revisions of existing products for certain of our customers could result in the delay or loss of sales to those customers, which could negatively impact our business and financial results.

 

Our industry is characterized by intense competition, rapidly evolving technology and continually changing customer preferences and requirements. As a result, we frequently develop and introduce new versions of our existing products, which we refer to as revisions.

 

Prior to purchasing our products, some of our customers require that products undergo a qualification process, which may involve testing of the products in the customer’s system. A subsequent revision to a product’s hardware or firmware, changes in the manufacturing process or our selection of a new supplier may require a new qualification process, which may result in delays in sales to customers, loss of sales, or us holding excess or obsolete inventory.

 

After products are qualified, it can take additional time before the customer commences volume production of components or devices that incorporate our products. If we are unsuccessful or delayed in qualifying any new or revised products with a customer, that failure or delay would preclude or delay sales of these products to the customer, and could negatively impact our financial results. In addition, new revisions to our products could cause our customers to alter the timing of their purchases, by either accelerating or delaying purchases, which could result in fluctuations of our net revenue from quarter to quarter.

  

Delays in deliveries or quality control problems with our component suppliers could damage our reputation and could cause our net revenue to decline and harm our results of operations.

 

We and our contract manufacturers are responsible for procuring raw materials for our products. Our products incorporate some components and technologies that are only available from single or limited sources of supply. Depending on a limited number of suppliers exposes us to risks, including limited control over pricing, availability, quality and delivery schedules. Moreover, due to our limited sales, we may not be able to convince suppliers to continue to make components available to us unless there is demand for these components from their other customers. If any one or more of our suppliers cease to provide us with sufficient quantities of components in a timely manner or on terms acceptable to us, we would have to seek alternative sources of supply and we may have difficulty identifying additional or replacement suppliers for some of our components.

 

 

 

 33 

 

 

We may experience constraints in the supply of certain materials and components that could affect our operating results.

 

Some of our integrated circuits are only available from a single source and in some cases, are no longer being manufactured. From time to time, integrated circuits, and potentially other components used in our products, will be phased out of production by the manufacturer. When this happens, we attempt to purchase sufficient inventory to meet our needs until a substitute component can be incorporated into our products. Nonetheless, we may be unable to purchase sufficient components to meet our demands, or we may incorrectly forecast our demands, and purchase too many or too few components. In addition, our products use components that have been subject to market shortages and substantial price fluctuations in the past. From time to time, we have been unable to meet customer orders because we were unable to purchase necessary components for our products. We do not have long-term supply arrangements with most of our vendors to obtain necessary components or technology for our products and instead purchase components on a purchase order basis. If we are unable to purchase components from these suppliers, our product shipments could be prevented or delayed, which could result in a loss of sales. If we are unable to meet existing orders or to enter into new orders because of a shortage in components, we will likely lose net revenue, risk losing customers and risk harm to our reputation in the marketplace, which could adversely affect our business, financial condition or results of operations.

 

We outsource substantially all of our manufacturing to contract manufacturers in Asia. If our contract manufacturers are unable or unwilling to manufacture our products at the quality and quantity we request, our business could be harmed.

 

We use contract manufacturers based in Asia to manufacture substantially all of our products. Generally, we do not have guaranteed supply agreements with our contract manufacturers or suppliers. If any of these subcontractors or suppliers were to cease doing business with us, we might not be able to obtain alternative sources in a timely or cost-effective manner. Our reliance on third-party manufacturers, especially in countries outside of the U.S., exposes us to a number of significant risks, including:

  

  · reduced control over delivery schedules, quality assurance, manufacturing yields and production costs;
  · lack of guaranteed production capacity or product supply;
  · reliance on these manufacturers to maintain competitive manufacturing technologies;
  · unexpected changes in regulatory requirements, taxes, trade laws and tariffs;
  · reduced protection for intellectual property rights in some countries;
  · differing labor regulations;
  · disruptions to the business, financial stability or operations, including due to strikes, labor disputes or other disruptions to the workforce, of these manufacturers;
  · compliance with a wide variety of complex regulatory requirements;
  · fluctuations in currency exchange rates;
  · changes in a country’s or region’s political or economic conditions;
  · effects of terrorist attacks abroad;
  · greater difficulty in staffing and managing foreign operations; and
  · increased financial accounting and reporting burdens and complexities.

  

Any problems that we may encounter with the delivery, quality or cost of our products from our contract manufacturers or suppliers could cause us to lose net revenue, damage our customer relationships and harm our reputation in the marketplace, each of which could materially and adversely affect our business, financial condition or results of operations. 

 

From time to time, we may transition the manufacturing of certain products from one contract manufacturer to another. When we do this, we may incur substantial expenses, risk material delays or encounter other unexpected issues.

 

 

 

 34 

 

 

We depend on distributors for a majority of our sales and to complete order fulfillment.

 

We depend on the resale of products through distributor accounts for a substantial majority of our worldwide net revenue. A significant reduction of effort by one or more distributors to sell our products or a material change in our relationship with one or more distributors may reduce our access to certain end customers and adversely affect our ability to sell our products. Furthermore, if a key distributor materially defaults on a contract or otherwise fails to perform, our business and financial results would suffer.

 

In addition, the financial health of our distributors and our continuing relationships with them are important to our success. Our business could be harmed if the financial health of these distributors impairs their performance and we are unable to secure alternate distributors.

  

Our ability to sustain and grow our business depends in part on the success of our distributors and resellers.

 

A substantial part of our revenues is generated through sales by distributors and resellers. To the extent they are unsuccessful in selling our products, or if we are unable to obtain and retain a sufficient number of high-quality distributors and resellers, our operating results could be materially and adversely affected. In addition, our distributors and resellers may devote more resources to marketing, selling and supporting products and services that are competitive with ours, than to our products. They also may have incentives to promote our competitors' products over our products, particularly for our competitors with larger volumes of orders, more diverse product offerings and a longer relationship with our distributors and resellers. In these cases, one or more of our important distributors or resellers may stop selling our products completely or may significantly decrease the volume of products they sell on our behalf. This sales structure also could subject us to lawsuits, potential liability and reputational harm if, for example, any of our distributors or resellers misrepresents the functionality of our products or services to customers, violates laws or our corporate policies. If we fail to effectively manage our existing or future distributors and resellers effectively, our business and operating results could be materially and adversely affected.

 

Changes to the average selling prices of our products could affect our net revenue and gross margins and adversely affect results of operations.

 

In the past, we have experienced reductions in the average selling prices and gross margins of our products. We expect competition to continue to increase, and we anticipate this could result in additional downward pressure on our pricing. Our average selling prices for our products might also decline as a result of other reasons, including promotional programs introduced by us or our competitors and customers who negotiate price concessions. To the extent we are able to increase prices, we may experience a decline in sales volumes if customers decide to purchase competitive products. If any of these were to occur, our gross margins could decline and we might not be able to reduce the cost to manufacture our products enough or at all to keep up with the decline in prices.

 

If we are unable to sell our inventory in a timely manner, it could become obsolete, which could require us to write-down or write off obsolete inventory, which could harm our operating results.

 

At any time, competitive products may be introduced with more attractive features or at lower prices than ours. If this occurs, and for other reasons, we may not be able to accurately forecast demand for our products and our inventory levels may increase. There is a risk that we may be unable to sell our inventory in a timely manner to avoid it becoming obsolete. If we are required to substantially discount our inventory or are unable to sell our inventory in a timely manner, we would be required to increase our inventory reserves or write off obsolete inventory and our operating results could be substantially harmed.

 

 

 

 35 

 

 

Our failure to compete successfully in our highly competitive market could result in reduced prices and loss of market share.

 

The market in which we operate is intensely competitive, subject to rapid technological advances and highly sensitive to evolving industry standards. The market can also be affected significantly by new product and technology introductions and marketing and pricing activities of industry participants. Our products compete directly with products produced by a number of our competitors. Many of our competitors and potential competitors have greater financial and human resources for marketing and product development, more experience conducting research and development activities, greater experience obtaining regulatory approval for new products, larger distribution and customer networks, more established relationships with contract manufacturers and suppliers, and more established reputations and name recognition. For these and other reasons, we may not be able to compete successfully against our current or potential future competitors. In addition, the amount of competition we face in the marketplace may change and grow as the market for IoT and M2M networking solutions grows and new companies enter the marketplace. Present and future competitors may be able to identify new markets, adapt new technologies, develop and commercialize products more quickly and gain market acceptance of products with greater success. As a result of these competitive factors, we may fail to meet our business objectives and our business, financial condition and operating results could be materially and adversely affected.

 

Our products may contain undetected software or hardware errors or defects that could lead to an increase in our costs, reduce our net revenue or damage our reputation.

 

We currently offer warranties ranging from one to five years on each of our products. Our products could contain undetected software or hardware errors or defects. If there is a product failure, we might have to replace all affected products, or we might have to refund the purchase price for the units. Regardless of the amount of testing we undertake, some errors might be discovered only after a product has been installed and used by customers. Any errors discovered after commercial release could result in financial losses and claims against us. Significant product warranty claims against us could harm our business, reputation and financial results and cause the market price of our common stock to decline.

  

Our inability to obtain appropriate industry certifications or approvals from governmental regulatory bodies could impede our ability to grow revenues in our wireless products.

 

The sale of our wireless products in some geographical markets is sometimes dependent on the ability to gain certifications and/or approvals by relevant governmental bodies. In addition, many of our products are certified as meeting various industry quality and/or compatibility standards.  Failure to obtain these certifications or approvals, or delays in receiving any needed certifications or approvals, could impact our ability to compete effectively or at all in these markets and could have an adverse impact on our revenues.

 

If software that we incorporate into our products were to become unavailable or no longer available on commercially reasonable terms, it could adversely affect sales of our products, which could disrupt our business and harm our financial results.

 

Certain of our products contain software developed and maintained by third-party software vendors or which are available through the “open source” software community. We also expect that we may incorporate software from third-party vendors and open source software in our future products. Our business would be disrupted if this software, or functional equivalents of this software, were either no longer available to us or no longer offered to us on commercially reasonable terms. In either case, we would be required to either redesign our products to function with alternate third-party software or open source software, or develop these components ourselves, which would result in increased costs and could result in delays in our product shipments. Furthermore, we might be forced to limit the features available in our current or future product offerings.

 

 

 

 36 

 

 

We face risks associated with our international operations that could impair our ability to grow our revenues abroad as well as our overall financial condition.

 

We believe that our future growth is dependent in part upon our ability to increase sales in international markets. These sales are subject to a variety of risks, including geopolitical events, fluctuations in currency exchange rates, tariffs, import restrictions and other trade barriers, unexpected changes in regulatory requirements, longer accounts receivable payment cycles, potentially adverse tax consequences, and export license requirements. In addition, we are subject to the risks inherent in conducting business internationally, including political and economic instability and unexpected changes in diplomatic and trade relationships. In many markets where we operate, business and cultural norms are different than those in the U.S., and practices that may violate laws and regulations applicable to us such as the Foreign Corrupt Practices Act (the “FCPA”) unfortunately are more commonplace. Although we have implemented policies and procedures with the intention of ensuring compliance with these laws and regulations, our employees, contractors and agents, as well as distributors and resellers involved in our international sales, may take actions in violation of our policies. Many of our vendors and strategic business allies also have international operations and are subject to the risks described above. Even if we are able to successfully manage the risks of international operations, our business may be adversely affected if one or more of our business partners are not able to successfully manage these risks. There can be no assurance that one or more of these factors will not have a material adverse effect on our business strategy and financial condition.

 

Rising concern regarding international tariffs could materially and adversely affect our business and results of operations.

 

The current political landscape has introduced significant uncertainty with respect to future trade regulations and existing international trade agreements, as shown by the recent U.S.-initiated renegotiation of the North America Free Trade Agreement, and Brexit in Europe. This uncertainty includes the possibility of imposing tariffs or penalties on products manufactured outside the U.S., including the US government’s institution of a 25% tariff on a range of products from China and subsequent tariffs imposed by the U.S. as well as tariffs imposed by trading partners on U.S. goods, and the potential for increased trade barriers between the UK and the European Union. The institution of trade tariffs both globally and between the U.S. and China specifically, carries the risk of negatively affecting the overall economic conditions of both China and the U.S., which could have a negative impact on us.

 

We cannot predict whether, and to what extent, there may be changes to international trade agreements or whether quotas, duties, tariffs, exchange controls or other restrictions on our products will be changed or imposed. If we are unable to source our products from the countries where we wish to purchase them, either because of regulatory changes or for any other reason, or if the cost of doing so increases, it could have a material adverse effect on our business, financial condition and results of operations. Furthermore, imposition of tariffs may result in local sourcing initiatives, or other developments that make it more difficult to sell our products in foreign countries, which would negatively impact our business and operating results.

 

Our failure to comply effectively with regulatory laws pertaining to our foreign operations could have a material adverse effect on our revenues and profitability.

 

We are required to comply with U.S. government export regulations in the sale of our products to foreign customers, including requirements to properly classify and screen our products against a denied parties list prior to shipment. We are also required to comply with the provisions of the FCPA and all other anti-corruption laws, such as the UK Anti-Bribery Act, of all other countries in which we do business, directly or indirectly, including compliance with the anti-bribery prohibitions and the accounting and recordkeeping requirements of these laws. Violations of the FCPA or other similar laws could trigger sanctions, including ineligibility for U.S. government insurance and financing, as well as large fines. Failure to comply with the aforementioned regulations could also affect our decision to sell our products in international jurisdictions, which could have a material adverse effect on our revenues and profitability.

 

 

 

 37 

 

 

Our failure to comply effectively with the requirements of applicable environmental legislation and regulation could have a material adverse effect on our revenues and profitability.

 

Certain states and countries have passed regulations relating to chemical substances in electronic products and requiring electronic products to use environmentally friendly components. For example, the European Union has the Waste Electrical and Electronic Equipment Directive, the Restrictions of Hazardous Substances Directive, and the Regulation on Registration, Evaluation, Authorization and Restriction of Chemicals. In the future, China and other countries including the U.S. are expected to adopt further environmental compliance programs. In order to comply with these regulations, we may need to redesign our products to use different components, which may be more expensive, if they are available at all. If we fail to comply with these regulations, we may not be able to sell our products in jurisdictions where these regulations apply, which could have a material adverse effect on our revenues and profitability.

 

Foreign currency exchange rates may adversely affect our results.

 

We are exposed to market risk primarily related to foreign currencies and interest rates. In particular, we are exposed to changes in the value of the U.S. dollar versus the local currency in which our products are sold and our services are purchased, including devaluation and revaluation of local currencies. Accordingly, fluctuations in foreign currency rates could adversely affect our revenues.

  

In particular, the uncertainty with respect to the ability of certain European countries to continue to service their sovereign debt obligations and the related European financial restructuring efforts may cause the value of the Euro and other European currencies to fluctuate. If the value of European currencies, including the Euro, deteriorates, thus reducing the purchasing power of European customers, our sales could be adversely affected.

 

Current or future litigation could adversely affect us.

 

We are subject to a wide range of claims and lawsuits in the course of our business. Any lawsuit may involve complex questions of fact and law and may require the expenditure of significant funds and the diversion of other resources. The results of litigation are inherently uncertain, and adverse outcomes are possible.

 

In particular, litigation regarding intellectual property rights occurs frequently in our industry. The results of litigation are inherently uncertain, and adverse outcomes are possible. Adverse outcomes may have a material adverse effect on our business, financial condition or results of operations.

 

There is a risk that other third parties could claim that our products, or our customers’ products, infringe on their intellectual property rights or that we have misappropriated their intellectual property. In addition, software, business processes and other property rights in our industry might be increasingly subject to third-party infringement claims as the number of competitors grows and the functionality of products in different industry segments overlaps. Other parties might currently have, or might eventually be issued, patents that pertain to the proprietary rights we use. Any of these third parties might make a claim of infringement against us. The results of litigation are inherently uncertain, and adverse outcomes are possible.

 

 

 

 38 

 

 

Responding to any infringement claim, regardless of its validity, could:

 

  · be time-consuming, costly and/or result in litigation;
  · divert management’s time and attention from developing our business;
  · require us to pay monetary damages, including treble damages if we are held to have willfully infringed;
  · require us to enter into royalty and licensing agreements that we would not normally find acceptable;
  · require us to stop selling or to redesign certain of our products; or
  · require us to satisfy indemnification obligations to our customers.

 

If any of these occur, our business, financial condition or results of operations could be adversely affected.

 

We may not be able to adequately protect or enforce our intellectual property rights, which could harm our competitive position or require us to incur significant expenses to enforce our rights.

 

We rely primarily on a combination of laws, such as patent, copyright, trademark and trade secret laws, and contractual restrictions, such as confidentiality agreements and licenses, to establish and protect our proprietary rights. Despite any precautions that we have taken:

 

  · laws and contractual restrictions might not be sufficient to prevent misappropriation of our technology or deter others from developing similar technologies;
  · other companies might claim intellectual property rights based upon prior use that negatively impacts our ability to enforce our trademarks and patents; and
  · policing unauthorized use of our patented technology and trademarks is difficult, expensive and time-consuming, and we might be unable to determine the extent of this unauthorized use.

  

Also, the laws of some of the countries in which we market and manufacture our products offer little or no effective protection of our proprietary technology. Reverse engineering, unauthorized copying or other misappropriation of our proprietary technology could enable third parties to benefit from our technology without paying us for it. Consequently, we may be unable to prevent our proprietary technology from being exploited by others in the U.S. or abroad, which could require costly efforts to protect our technology. Policing the unauthorized use of our technology, trademarks and other proprietary rights is expensive, difficult and, in some cases, impracticable. Litigation may be necessary in the future to enforce or defend our intellectual property rights, to protect our trade secrets or to determine the validity and scope of the proprietary rights of others. Such litigation could result in substantial costs and diversion of management resources, either of which could harm our business. Accordingly, despite our efforts, we may not be able to prevent third parties from infringing upon or misappropriating our intellectual property, which may harm our business, financial condition and results of operations.

  

The impact of natural disasters and other business interruptions could negatively impact our supply chain and customers resulting in an adverse impact to our revenues and profitability.

 

Certain of our components and other materials used in producing our products are from regions susceptible to natural disasters. A natural disaster could damage equipment and inventory at our suppliers’ facilities, adversely affecting our supply chain. If we are unable to obtain these materials, we could experience a disruption to our supply chain that would hinder our ability to produce our products in a timely manner, or cause us to seek other sources of supply, which may be more costly or which we may not be able to procure on a timely basis. In addition, our customers may not follow their normal purchasing patterns or temporarily cease purchasing from us due to impacts to their businesses in the region, creating unexpected fluctuations or decreases in our revenues and profitability. Natural disasters in other parts of the world on which our operations are reliant also could have material adverse impacts on our business.

 

 

 

 39 

 

 

In addition, our operations and those of our suppliers are vulnerable to interruption by fire, earthquake, power loss, telecommunications failure, cybersecurity breaches, Information Technology (“IT”) systems failure, terrorist attacks and other events beyond our control. A substantial portion of our facilities, including our corporate headquarters and other critical business operations, are located near major earthquake faults and, therefore, may be more susceptible to damage if an earthquake occurs. We do not carry earthquake insurance for direct earthquake-related losses. If a business interruption occurs, whether due to a natural disaster or otherwise, our business could be materially and adversely affected.

 

If our products become subject to cybersecurity breaches, or if public perception is that they are vulnerable to cyberattacks, our reputation and business could suffer.

 

We could be subject to liability or our reputation could be harmed if technologies integrated into our products fail to prevent cyberattacks, or if our partners or customers fail to safeguard the systems with security policies that conform to industry best practices. In addition, any cyberattack or security breach that affects a competitor’s products could lead to the negative perception that our solutions are or could be subject to similar attacks or breaches.

 

Cybersecurity breaches and other disruptions could compromise our information and expose us to liability, which could cause our business and reputation to suffer.

 

In the ordinary course of our business, we collect and store sensitive data, including intellectual property, our proprietary business information and that of our customers, suppliers and business partners, and personally identifiable information of our employees, on our networks and third-party cloud software providers. The secure processing, maintenance and transmission of this information is critical to our operations. Although we have taken steps to protect the security of our information systems, we have, from time to time, experienced threats to our data and systems, including malware and computer virus attacks and it is possible that in the future our safety and security measures will not prevent the systems’ improper functioning or damage, or the improper access or disclosure of personally identifiable information such as in the event of cyber-attacks. In addition, due to the fast pace and unpredictability of cyber threats, long-term implementation plans designed to address cybersecurity risks become obsolete quickly and, in some cases, it may be difficult to anticipate or immediately detect such incidents and the damage they cause. Any unauthorized access, disclosure or other loss of information could result in legal claims or proceedings, disrupt our operations, damage our reputation, and cause a loss of confidence in our products and services, which could adversely affect our business.

 

Some of our new software offerings may be subject to various cybersecurity risks, which are particularly acute in the cloud-based technologies operated by us and other third parties that form a part of our solutions.

 

In connection with certain implementations of our management software platform, application, and SaaS offering, ConsoleFlow, we expect to store, convey and potentially process data produced by devices. This data may include confidential or proprietary information, intellectual property or personally identifiable information of our customers or other third parties with whom they do business. It is important for us to maintain solutions and related infrastructure that are perceived by our customers and other parties with whom we do business to provide a reasonable level of reliability and security. Despite available security measures and other precautions, the infrastructure and transmission methods used by our products and services may be vulnerable to interception, attack or other disruptive problems.

 

If a cyberattack or other security incident were to allow unauthorized access to or modification of our customers’ data or our own data, whether due to a failure with our systems or related systems operated by third parties, we could suffer damage to our brand and reputation. The costs we would incur to address and fix these incidents could significantly increase our expenses. These types of security incidents could also lead to lawsuits, regulatory investigations and increased legal liability, including in some cases contractual costs related to customer notification and fraud monitoring. Further, as regulatory focus on privacy and data security issues continues to increase and worldwide laws and regulations concerning the protection of information become more complex, the potential risks and costs of compliance to our business will intensify.

 

 

 

 40 

 

 

Acquisitions, strategic partnerships, joint ventures or investments may impair our capital and equity resources, divert our management’s attention or otherwise negatively impact our operating results.

 

We may pursue acquisitions, strategic partnerships and joint ventures that we believe would allow us to complement our growth strategy, increase market share in our current markets and expand into adjacent markets, broaden our technology and intellectual property and strengthen our relationships with distributors, OEMs and ODMs. Any future acquisition, partnership, joint venture or investment may require that we pay significant cash, issue equity or incur substantial debt. Acquisitions, partnerships or joint ventures may also result in the loss of key personnel and the dilution of existing stockholders to the extent we are required to issue equity securities. In addition, acquisitions, partnerships or joint ventures require significant managerial attention, which may be diverted from our other operations. These capital, equity and managerial commitments may impair the operation of our business. Furthermore, acquired businesses may not be effectively integrated, may be unable to maintain key pre-acquisition business relationships, may not result in an increase in revenues or earnings or the delivery of new products, may contribute to increased fixed costs, and may expose us to unanticipated liabilities. If any of these occur, we may fail to meet our business objectives and our business, financial condition and operating results could be materially and adversely affected. 

 

If we are unable to attract, retain or motivate key senior management and technical personnel, it could seriously harm our business.

 

Our financial performance depends substantially on the performance of our executive officers and of key engineers, marketing and sales employees. We are particularly dependent upon our technical personnel, due to the specialized technical nature of our business. If we were to lose the services of our executive officers or any of our key personnel and were not able to find replacements in a timely manner, our business could be disrupted, other key personnel might decide to leave, and we might incur increased operating expenses associated with finding and compensating replacements.

 

We may experience difficulties associated with utilizing third-party logistics providers.

 

A majority of our physical inventory management process, as well as the shipping and receiving of our inventory, is performed by third-party logistics providers in Los Angeles, California and Hong Kong. There is a possibility that these third-party logistics providers will not perform as expected and we could experience delays in our ability to ship, receive, and process the related data in a timely manner. This could adversely affect our financial position, results of operations, cash flows and the market price of our common stock.

 

Relying on third-party logistics providers could increase the risk of the following: failing to receive accurate and timely inventory data, theft or poor physical security of our inventory, inventory damage, ineffective internal controls over inventory processes or other similar business risks out of our immediate control.

  

We may need additional capital and it may not be available on acceptable terms, or at all.

  

To remain competitive, we must continue to make significant investments to operate our business and develop our products. Our future capital requirements will depend on many factors, including the timing and amount of our net revenue, research and development expenditures, expenses associated with any strategic partnerships or acquisitions and infrastructure investments, and expenses related to litigation, each of which could negatively affect our ability to generate additional cash from operations. If cash generated from operations is insufficient to satisfy our working capital requirements, we may need to raise additional capital. Looking ahead at long-term needs, we may need to raise additional funds for a number of purposes, including:

  

  · to fund working capital requirements;
  · to update, enhance or expand the range of products we offer;
  · to increase our sales and marketing activities; or
  · to respond to competitive pressures or perceived opportunities, such as investment, acquisition and international expansion activities.

  

 

 

 41 

 

 

We may seek additional capital from public or private offerings of our capital stock, borrowings under our existing or future credit lines or other sources. If we issue equity or debt securities to raise additional funds, our existing stockholders may experience dilution, and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise additional funds through collaborations, licensing, joint ventures, or other similar arrangements, it may be necessary to relinquish valuable rights to our potential future products or proprietary technologies, or grant licenses on terms that are not favorable to us. There can be no assurance that we will be able to raise any needed capital on terms acceptable to us, if at all. If we are unable to secure additional financing in sufficient amounts or on favorable terms, we may not be able to develop or enhance our products, take advantage of future opportunities, respond to competition or continue to operate our business.

 

The terms of our amended credit facility may restrict our financial and operational flexibility and, in certain cases, our ability to operate.

 

The terms of our amended credit facility restrict, among other things, our ability to incur additional indebtedness; pay dividends or make certain other restricted payments; consummate certain asset sales; enter into certain transactions with affiliates; merge or consolidate with other persons; or sell, assign, transfer, lease, convey or otherwise dispose of all or substantially all of our assets. Further, we are currently and may in the future be required to maintain specified financial ratios, including pursuant to a Minimum Tangible Net Worth covenant, and satisfy certain financial conditions. Our ability to meet those financial ratios and tests can be affected by events beyond our control, and there can be no assurance that we will meet those tests. Pursuant to our amended credit agreement and the related loan and security agreement, we have pledged substantially all of our assets to our lender, Silicon Valley Bank.

 

Our quarterly operating results may fluctuate, which could cause the market price of our common stock to decline.

 

We have experienced, and expect to continue to experience, significant fluctuations in net revenue, expenses and operating results from quarter to quarter. We therefore believe that quarter to quarter comparisons of our operating results are not a good indication of our future performance, and you should not rely on them to predict our future operating or financial performance or the future performance of the market price of our common stock. A high percentage of our operating expenses are relatively fixed and are based on our forecast of future revenue. If we were to experience an unexpected reduction in net revenue in a quarter, we would likely be unable to adjust our short-term expenditures significantly. If this were to occur, our operating results for that fiscal quarter would be harmed. In addition, if our operating results in future fiscal quarters were to fall below the expectations of equity analysts and investors, the market price of our common stock would likely fall.

 

The market price of our common stock may be volatile based on a number of factors, many of which are not under our control.

 

The market price of our common stock has been highly volatile. The market price of our common stock could be subject to wide fluctuations in response to a variety of factors, many of which are out of our control, including:

 

  · adverse changes in domestic or global economic, market and other conditions;
  · new products or services offered by our competitors;
  · our completion of or failure to complete significant one-time sales of our products;
  · actual or anticipated variations in quarterly operating results;
  · changes in financial estimates by securities analysts;
  · announcements of technological innovations;
 

·

·

our announcement of significant acquisitions, strategic partnerships, joint ventures or capital commitments;

conditions or trends in the industry;

  · additions or departures of key personnel;
  · increased competition from industry consolidation;
  · mergers and acquisitions; and
  · sales of common stock by our stockholders or us or repurchases of common stock by us.

 

In addition, the Nasdaq Capital Market often experiences price and volume fluctuations. These fluctuations often have been unrelated or disproportionate to the operating performance of companies listed on the Nasdaq Capital Market.

 

 

 

 42 

 

 

Item 2.   Unregistered Sales of Equity Securities and Use of Proceeds

 

None.

  

Item 3.   Defaults Upon Senior Securities

 

None.

 

Item 4.   Mine Safety Disclosures

 

Not applicable.

 

Item 5.   Other Information

 

None.

  

 

Item 6.   Exhibits

 

      Incorporated by Reference

Exhibit

Number

Description

Provided

Herewith

Form Exhibit

Filing

Date

           
10.1 Lantronix, Inc. 2020 Performance Incentive Plan   8-K 10.1 11/4/2020
           
31.1 Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 X      
           
31.2 Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 X      
           
32.1* Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 X      
           
101.INS XBRL Instance Document X      
101.SCH XBRL Taxonomy Extension Schema Document X      
101.CAL XBRL Taxonomy Extension Calculation Linkbase Document X      
101.DEF XBRL Taxonomy Extension Definition Linkbase Document X      
101.LAB XBRL Taxonomy Extension Label Linkbase Document X      
101.PRE XBRL Taxonomy Extension Presentation Linkbase Document X      

_________________

* Furnished, not filed.

 

 

 

 

 

 

 43 

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

  LANTRONIX, INC.
   
     
Date: November 13, 2020 By: /s/ PAUL PICKLE
    Paul Pickle
    President and Chief Executive Officer
    (Principal Executive Officer)
     
     
Date: November 13, 2020 By: /s/ JEREMY WHITAKER
    Jeremy Whitaker
Chief Financial Officer
    (Principal Financial and Accounting Officer)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 44