UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(MARK ONE)

For the quarterly period ended September 30, 2019

For the transition period from                to

Commission file number: 001-35436

TECNOGLASS INC.

(Exact Name of Registrant as Specified in Its Charter)

Avenida Circunvalar a 100 mts de la Via 40, Barrio Las Flores Barranquilla, Colombia

(Address of principal executive offices)

(57)(5) 3734000

(Issuer’s telephone number)

N/A

(Former name, former address and former fiscal year, if changed since last report):

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [  ]

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes [X] No [  ]

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [  ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [  ] No [X]

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 45,519,472 ordinary shares as of September 30, 2019.

TECNOGLASS INC.

FORM 10-Q FOR THE PERIOD ENDED SEPTEMBER 30, 2019

TABLE OF CONTENTS

PART I - FINANCIAL INFORMATION

Item 1. Financial Statements.

Tecnoglass Inc. and Subsidiaries

Condensed Consolidated Balance Sheets

(In thousands, except share and per share data)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Tecnoglass Inc. and Subsidiaries

Condensed Consolidated Statements of Operations and Other Comprehensive Income

(In thousands, except share and per share data)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Tecnoglass Inc. and Subsidiaries

Condensed Consolidated Statements of Cash Flows

(Amounts in thousands)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Tecnoglass Inc. and Subsidiaries

Condensed Consolidated Statements of Shareholders’ Equity

(Amounts in thousands, except share and per share data)

(Unaudited)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Tecnoglass Inc. and Subsidiaries

Notes to Condensed Consolidated Financial Statements

(Amounts in thousands, except share and per share data)

Note 1. General

Business Description

Tecnoglass Inc., a Cayman Islands exempted company (the “Company”, “Tecnoglass,” “TGI,” “we, “us” or “our”) manufactures hi-specification, architectural glass and windows for the global residential and commercial construction industries. Currently the Company offers design, production, marketing, and installation of architectural systems for buildings of high, medium and low elevation size. Products include windows and doors in glass and aluminum, office partitions and interior divisions, floating facades and commercial window showcases. The Company exports most of its production to foreign countries, selling to customers in North, Central and South America.

The Company manufactures both glass and aluminum products. Its glass products include tempered glass, laminated glass, thermo-acoustic glass, curved glass, silk-screened glass, acoustic glass and digital print glass. Its Alutions plant produces mill finished, anodized, painted aluminum profiles and rods, tubes, bars and plates. Alutions’ operations include extrusion, smelting, painting and anodizing processes, and exporting, importing and marketing aluminum products.

The Company also designs, manufactures, markets and installs architectural systems for high, medium and low-rise construction, glass and aluminum windows and doors, office dividers and interiors, floating facades and commercial display windows.

Note 2. Basis of Presentation and Summary of Significant Accounting Policies

Basis of Presentation and Use of Estimates

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”) and pursuant to the accounting and disclosure rules and regulations of the Securities and Exchange Commission (“SEC”) for interim reporting purposes. The results reported in these unaudited condensed consolidated financial statements are not necessarily indicative of results that may be expected for the entire year. These unaudited condensed consolidated financial statements should be read in conjunction with the information contained in the Company’s Annual Report on Form 10-K for the year ended December 31, 2018. The year-end condensed balance sheet data was derived from audited financial statements but does not include all disclosures required by US GAAP.

The preparation of these unaudited condensed consolidated financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets and liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities at the date of the Company’s financial statements. Actual results may differ from these estimates under different assumptions and conditions. Estimates inherent in the preparation of these unaudited condensed consolidated financial statements relate to the collectability of account receivables, the valuation of inventories, estimated earnings on uncompleted contracts, useful lives and potential impairment of long-lived assets. Changes in estimates are reflected in the periods during which they become known. Actual amounts may differ from these estimates and could differ materially. These financial statements reflect all adjustments that in the opinion of management are necessary for a fair statement of the financial position, results of operations and cash flows for the period presented, and are of a normal, recurring nature.

The Company has one operating segment, Architectural Glass and Windows, which is also its reporting segment, comprising the design, manufacturing, distribution, marketing and installation of high-specification architectural glass and window product sold to the construction industry.

Principles of Consolidation

These unaudited condensed consolidated financial statements consolidate TGI, its subsidiaries Tecnoglass S.A.S (“TG”), C.I. Energía Solar S.A.S E.S. Windows (“ES”), ES Windows LLC (“ESW LLC”), Tecnoglass LLC (“Tecno LLC”), Tecno RE LLC (“Tecno RE”), GM&P Consulting and Glazing Contractors (“GM&P”), Componenti USA LLC (“Componenti”) and ES Metals SAS (“ES Metals”), which are entities in which we have a controlling financial interest because we hold a majority voting interest. To determine if we hold a controlling financial interest in an entity, we first evaluate if we are required to apply the variable interest entity (“VIE”) model to the entity, otherwise the entity is evaluated under the voting interest model. All significant intercompany accounts and transactions are eliminated in consolidation, including unrealized intercompany profits and losses. The equity method of accounting is used for investments in affiliates and other joint ventures over which the Company has significant influence but does not have effective control.

Derivative Financial Instruments

The Company recognizes all derivative financial instruments as either assets or liabilities at fair value on the consolidated balance sheet. The changes in fair value of derivative instruments that are designated and qualify as cash flow hedges, the unrealized gains or losses on the derivatives are recorded in the consolidated statement of comprehensive income. Amounts in Accumulated other comprehensive loss on the consolidated balance sheet are reclassified into the consolidated statement of income in the same period or periods during which the hedged transactions are settled.

Recently Issued Accounting Pronouncements

In June 2016, FASB issued Accounting Standards Update (ASU) 2016-13, Financial Instruments—Credit Losses (Topic 326). This ASU represents a significant change in the allowance for credit losses accounting model by requiring immediate recognition of management’s estimates of current expected credit losses. Under the prior model, losses were recognized only as they were incurred, which FASB has noted delayed recognition of expected losses that might not yet have met the threshold of being probable. The new model is applicable to all financial instruments that are not accounted for at fair value through net income, thereby bringing consistency in accounting treatment across different types of financial instruments and requiring consideration of a broader range of variables when forming loss estimates. ASU 2016-13 is effective for fiscal years beginning after December 15, 2019, (with early application permitted). The FASB has announced that it will issue an update during the fourth quarter of 2019 that will postpone the effective date further into the future. During 2019, the FASB issued ASU 2019-04 and ASU 2019-05 with Codification Improvements to Topic 326, Financial Instruments – Credit Losses. The Company is currently evaluating the potential effect of this ASU on its consolidated financial statements.

In August 2017, the FASB issued ASU 2017-12, “Derivatives and Hedging (Topic 815): Targeted Improvements to Accounting for Hedging Activities.” The amendments under ASU 2017-12 refine and expand hedge accounting requirements for both financial (e.g., interest rate) and commodity risks. Its provisions create more transparency around how economic results are presented, both on the face of the financial statements and in the footnotes. It also makes certain targeted improvements to simplify the application of hedge accounting guidance. ASU 2017-12 became effective for us in the first quarter of 2019. During the quarter ended September 30, 2019, we entered into foreign currency non-delivery forward and collar contracts which we have designated as cash flow hedges and are accounting for as derivative financial instruments to which we are applying the provisions of ASU 2017-12. Prior to the quarter ended September 30, 2019 we did not have any hedging derivatives and therefore prior periods will not be affected by this pronouncement.

New Accounting Standards Implemented

In February 2016, the FASB issued ASU 2016-02 “Leases (Topic 842)” (“ASU 2016-02”). The FASB issued ASU 2016-02 to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. Under ASU 2016-02, a lessee will recognize in the statement of financial position a liability to make lease payments (the lease liability) and a right-to-use asset representing its right to use the underlying asset for the lease term. ASU 2016-02 retains a distinction between finance leases (i.e. capital leases under current GAAP) and operating leases. The classification criteria for distinguishing between finance leases and operating leases will be substantially similar to the classification criteria for distinguishing between capital leases and operating leases under current GAAP. The amendments of this ASU are effective for reporting periods beginning after December 15, 2018, which for the Company is the fiscal year beginning January 1, 2019.

The Company did not adjust the comparative periods presented as the FASB provided entities the option to instead apply the provisions of the new leases guidance using the modified retrospective application approach. The new standard provided a number of optional practical expedients in transition. We elected the ‘package of practical expedients’, which allowed the company to not reassess our prior conclusions about lease identification, lease classification and direct costs. The new standard also provides practical expedients for an entity’s ongoing accounting. We elected the short-term lease recognition exemption for all leases that qualified, primarily for certain equipment leases that are month-to-month leases. This means, for those leases, we did not recognize right-of-use assets or lease liabilities. We also elected the practical expedient to not separate lease and non-lease components for all classes of underlying assets.

We have identified and analyzed our lease portfolio and evaluated the new reporting and disclosure requirements of the new guidance, and our lease-related processes and internal controls. The adoption of this standard had no material impact to the Company’s financial statements, as, under prior guidance, we had recognized capital leases which correspond to the right-of-use asset and lease liability described under the new guidance. This standard does not have a significant impact on our liquidity or on our debt covenant compliance under our current agreements.

As of January 1, 2019, the Company had $378 finance lease right-of-use assets related to computing equipment and a lease liability for $380 on its Condensed Consolidated Balance Sheet. As of September 30, 2019, the Company had $449 finance lease right-of-use assets related to computing equipment and a lease liability for $559 on its Condensed Consolidated Balance Sheet. The lease agreements include terms to extend the lease, however the Company does not intend to extend its current leases. The weighted average remaining lease term approximates 2.8 years. The right-of-use assets are depreciated and interest expense from the lease liability are recorded on our Condensed Consolidated Statement of Operations.

Additionally, as of September 30, 2019 the Company had a commitment for $66 under operating leases related to short term apartment leases, installation equipment and computing equipment which expire during the current year that have not been capitalized due to their short-term nature. Rental expense from these leases is recognized on our Condensed Consolidated Income Statement as incurred. Finance lease costs, including amortization of the right-of-use assets and interest expense, short term lease cost, and related cashflows have not been material as of September 30, 2019.

Leases Accounting Policy

We determine if an arrangement is a lease at inception. We include finance lease right-of-use assets as part of property and equipment and the lease liability as part of our current portion of long-term debt and long-term debt on our Condensed Consolidated Balance Sheet. Leases considered short-term are not capitalized, given our election not to recognize right-of-use assets and lease liabilities arising from short-term leases, but instead considered operating leases and the resulting rental expense is recognized on our Condensed Consolidated Statement of Operations as incurred.

Finance lease right-of-use assets and lease liabilities are recognized based on the present value of the future lease payments over the lease term at commencement date. As most of our leases do not provide an implicit rate, we use our incremental borrowing rate based on the information available at commencement date in determining the present value of future payments. Our lease terms may include options to extend or terminate the lease when it is reasonably certain that we will exercise that option.

Note 3. – Long-term Investments

Saint-Gobain Joint Venture

On January 11, 2019, we entered into a joint venture agreement with Saint-Gobain, a world leader in the production of float glass, a key component of our manufacturing process, whereby we acquired a 25.8% minority ownership interest in Vidrio Andino Holdings S.A.S (“Vidrio Andino”), a Colombia-based subsidiary of Compagnie de Saint-Gobain S.A. (“Saint-Gobain”). The purchase price for our interest in this entity was $45 million, of which $34.1 was paid in cash, and $10.9 million is to be paid with a piece of land near our existing facility in Barranquilla. The land will be contributed on our behalf by our Chief Executive Officer and Chief Operating Officer, José M. Daes and Christian T. Daes in exchange for cash or shares of the Company and subject to an external valuation to support an arm´s length transaction. The land will serve the purpose of developing a second float glass plant nearby our existing manufacturing facilities which we expect to carry significant efficiencies for us once it becomes operative. Vidrio Andino’s float glass plant located in the outskirts of Bogota, Colombia, has been one of our main suppliers of raw glass. We believe this transaction will solidify our vertical integration strategy by acquiring an interest in the first stage of our production chain, while securing ample glass supply for our expected production needs.

On May 3, 2019, we consummated the joint venture agreement acquiring a 25.8% minority ownership interest in Vidrio Andino with a cash payment of $34.1 million, and the land still to be contributed by January 2020, as per the agreement. As of that date the Company recorded the investment within Long-term assets on the Company’s Condensed Consolidated Balance Sheet for $45.0 million and a liability for $10.9 million within current liabilities on the Company’s Condensed Consolidated Balance to be settled with the contribution of the aforementioned piece of land. Since the date of the acquisition, we have recognized the proportional share of Vidrio Andino’s net income using the equity method on the Condensed Consolidated Statement of Operations and Other Comprehensive Income as the Company is deemed to have significant influence, but does not have effective control of Vidrio Andino.

Establishment of a new subsidiary

In April 2019, ESMetals, a Colombian entity in which the Company has 70% equity interest began operations. ESMetals serves as a metalwork contractor to supply the Company with steel accessories used in the assembly of certain architectural systems as part of our vertical integration strategy. When the company owns a majority (but less than 100%) of a subsidiary’s stock, the Company includes in its Consolidated Financial Statements the non-controlling interest in the subsidiary. The non-controlling interest in the Condensed Consolidated Statements of Operations and Other Comprehensive Income is equal to the non-controlling interests’ proportionate share of the subsidiary’s net income and, as included in Shareholders’ Equity on the Condensed Consolidated Balance Sheet, is equal to the non-controlling interests’ proportionate share of the subsidiary’s net assets. In determining the fair value we used the income approach and the market approach which was performed by third party valuation specialists under management.

Note 4. - Inventories, net

Note 5. – Revenues, Contract Assets and Contract Liabilities

Disaggregation of Total Net Sales

The Company disaggregates its sales with customers by revenue recognition method for its only segment, as the Company believes these factors affect the nature, amount, timing, and uncertainty of the Company’s revenue and cash flows.

The following table presents geographical information about revenues.

Contract Assets and Liabilities

Contract assets represent accumulated incurred costs and earned profits on contracts with customers that have been recorded as sales, but have not been billed to customers and are classified as current and a portion of the amounts billed on certain fixed price contracts that are withheld by the customer as a retainage until a final good receipt of the complete project to the customers satisfaction. Contract liabilities consist of advance payments and billings in excess of costs incurred and deferred revenue, and represent amounts received in excess of sales recognized on contracts. The Company classifies advance payments and billings in excess of costs incurred as current, and deferred revenue as current or non-current based on the expected timing of sales recognition. Contract assets and contract liabilities are determined on a contract by contract basis at the end of each reporting period. The non-current portion of contract liabilities is included in other liabilities in the Company’s consolidated balance sheets.

The table below presents the components of net contract assets (liabilities).

The components of contract assets are presented in the table below.