UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

___________________

FORM 20-F

___________________

OR

For the fiscal year ended December 31, 2017

OR

OR

Commission File Number 1-11176

_________________________________

GRUPO SIMEC, S.A.B. de C.V.

(Exact name of registrant as specified in its charter)

_________________________________

GROUP SIMEC

(Translation of registrant’s name into English)

UNITED MEXICAN STATES

(Jurisdiction of incorporation or organization)

_________________________________

Calzada Lázaro Cárdenas 601
Colonia La Nogalera, Guadalajara,
Jalisco, México 44440

(Address of principal executive offices)

Mario Moreno Cortez, telephone number 011-52-33 3770-6700, e-mail mmoreno@gruposimec.com.mx

(Name, telephone, e-mail and/or facsimile number and address of company contact person)

_________________________________

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Securities registered or to be registered pursuant to Section 12(g) of the Act: None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None

Indicate the number of outstanding shares of each of the issuer’s classes of common stock as of December 31, 2017 was:

Series B Common Stock —494,046,650 shares

_________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒  No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☐ No ☐ (note: not required of registrant)

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards^† provided pursuant to Section 13(a) of the Exchange Act.    ☐

^†The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012.

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

☐ U.S. GAAP ☒  International Financial Reporting Standards as issued by the International Accounting Standards Board ☐ Other

Indicate by check mark which financial statement item the registrant has elected to follow. Item 17 ☐ Item 18 ☒

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

Table of Contents

Page

CERTAIN TERMS

Grupo Simec, S.A.B. de C.V. is a corporation (sociedad anónima bursátil de capital variable) organized under the laws of the United Mexican States (“Mexico”). Unless the context requires otherwise, when used in this annual report, the terms “we,” “our,” “the company,” “our company” and “us” refer to Grupo Simec, S.A.B. de C.V., together with its consolidated subsidiaries.

References in this annual report to “U.S. dollars” or “U.S.$” are to the lawful currency of the United States. References in this annual report to “pesos” or “Ps.” are to the lawful currency of Mexico. References to “tons” in this annual report refer to tons; a metric ton equals 1,000 kilograms or 2,204 pounds. We publish our financial statements in pesos.

The terms “special bar quality steel” or “SBQ steel” refer to steel that is hot rolled or cold finished round square and hexagonal steel bars that generally contain higher proportions of alloys than lower quality grades of steel. SBQ steel is produced with precise chemical specifications and generally is made to order following client specifications.

This annual report contains translations of certain peso amounts to U.S. dollars at specified rates solely for your convenience. These translations do not mean that the peso amounts actually represent such dollar amounts or could be converted into U.S. dollars at the rate indicated. Unless otherwise indicated, we have translated these U.S. dollar amounts from pesos at the exchange rate of Ps. 19.7354 per U.S.$1.00, the interbank transactions rate in effect on December 31, 2017. On May 11, 2018, the interbank transactions rate for the peso was Ps. 19.5387 per U.S.$1.00.

FORWARD LOOKING STATEMENTS

This annual report contains certain statements regarding our business that may constitute “forward looking statements” within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. When used in this annual report, the words “anticipates,” “plans,” “believes,” “estimates,” “intends,” “expects,” “projects” and similar expressions are intended to identify forward looking statements, although not all forward looking statements contain those words. These statements, including, but not limited to, our statements regarding our strategy for raw material acquisition, products and markets, production processes and facilities, sales and distribution and exports, growth and other trends in the steel industry and various markets, operations and liquidity and capital resources, are based on management’s beliefs, as well as on assumptions made by, and information currently available to, management, and involve various risks and uncertainties, some of which are beyond our control. Our actual results could differ materially from those expressed in any forward looking statement. In light of these risks and uncertainties, we cannot assure you that forward looking statements will prove to be accurate. Factors that might cause actual results to differ materially from forward looking statements include, but are not limited to, the following:

Forward looking statements speak only as of the date they were made, and we undertake no obligation to update publicly or to revise any forward looking statements after the date of this annual report because of new information, future events or other factors. In light of the risks and uncertainties described above, the forward looking events and circumstances discussed in this annual report might not occur.

PART I 

Not applicable.

Not applicable.

This annual report includes our consolidated financial statements as of December 31, 2016 and 2017 and for each of the three years ended December 31, 2015, 2016 and 2017. We have adopted International Financial Reporting Standards (IFRS), and its amendments and interpretations, as issued by the International Accounting Standard Board (IASB). We have adjusted the financial statements of our subsidiaries to conform to IFRS, and we have translated them to Mexican pesos. See Note 4 to our consolidated financial statements included elsewhere herein.

When preparing the financial statements for our individual subsidiaries and transactions in currencies other than our functional currency, the first step to convert financial information from operations abroad is the determination of the functional currency. The functional currency is the currency of the primary economic environment of the foreign operation or, if different, the currency that mainly impacts its cash flows. The U.S. dollar was considered as the functional currency of all the U.S. subsidiaries (except Simec International 8, Inc., Steel Promotor, Inc. and Coadm Steel, Inc., which were subsidiaries of Corporacion Aceros DM, S.A. de C.V., until they merged in 2015) and the Brazilian Real was considered as the functional currency for GV do Brasil Industria e Comercio de Aço LTDA.; therefore, the financial statements of these subsidiaries were translated into Mexican pesos by applying:

Translation differences are carried directly to the consolidated statements of comprehensive income as other comprehensive income under the caption “translation effects of foreign subsidiaries.”

The Mexican peso was considered until 2015 the functional currency of the Simec International 8, Inc., Steel Promotor, Inc. and Coadm Steel, Inc. until the date they merged, after which they use the U.S. dollar as their recording currency. Therefore, the financial statements were translated to Mexican pesos before the subsidiaries merged, as follows:

Translation differences were carried directly to the consolidated statement of comprehensive income as part of the income of the year under the caption foreign exchange gain (loss).

The translation effect in the results of operations for the years ended December 31, 2017, 2016 and 2015 resulted from applying the following exchange rates (peso/dollar) to the active or passive monetary position in foreign currency:

The following tables present the selected consolidated financial information as of and for each of the periods indicated. The selected financial and operating information as of December 31, 2013, 2014 and 2015 and for each of the years ended December 31, 2013, 2014 and 2015 has been derived in part from our consolidated financial statements, which have been reported on by Castillo Miranda y Compañía, S.C., a member practice of BDO International Limited (“BDO”), and the selected financial and operating information as of and for the years ended December 31, 2016 and 2017 set forth below has been derived in part from our consolidated financial statements, which have been reported on by Marcelo de los Santos y Cía., S. C. a practice member of Moore Stephens International Limited (“Moore Stephens”). BDO and Moore Stephens have relied on the audited consolidated financial statements of Corporación Aceros DM., S.A. de C.V. (“Aceros DM”) subsidiaries and affiliates, reported on by Marcelo de los Santos y Cía., S. C. a practice member of Moore Stephens. The financial and operating information of GV do Brasil Industria e Comercio de Aço LTDA, as of December 31 2015 and 2014 and for each of the years ended December 31, 2015 and 2014, have been reported by BDO RCS Independent Auditors SS and for the years ended December 31, 2016 and 2017, the financial and operating information of GV do Brasil Industria e Comercio de Aço LTDA have been reported by Moore Stephens Lima Lucchesi, member of Moore Stephens International Limited. The selected financial information should be read in conjunction with, and is qualified in its entirety by reference to, our consolidated financial statements included elsewhere herein.

Adjusted EBITDA does not represent, and should not be considered as, an alternative to net income, as an indicator of our operating performance, or as an alternative to cash flow as an indicator of liquidity. You should bear in mind that Adjusted EBITDA is not defined and is not a recognized financial measure under MFRS, U.S. GAAP or IFRS and that it may be calculated differently by different companies and must be read in conjunction with the explanations that accompany it. Adjusted EBITDA as presented in this table does not take into account our working capital requirements, debt service requirements and other commitments.

We believe that Adjusted EBITDA can be useful to facilitate comparisons of operating performance between periods and with other companies in our industry because it excludes the effect of: (i) depreciation, amortization and impairment loss which represents a non-cash charge to earnings; (ii) certain financing costs, which are significantly affected by external factors, including interest rates and foreign currency exchange rates, which can have little bearing on our operating performance; (iii) other income (expense) that are non-recurring operations; and (iv) income tax expense and employee statutory profit-sharing expense. However, Adjusted EBITDA has certain significant limitations, including that it does not include the following:

Adjusted EBITDA should not be considered in isolation or as a substitute for net income, net cash flow from operating activities or net cash flow from investing and financing activities. Reconciliation of net income (loss) to Adjusted EBITDA is as follows:

Exchange Rates

The following table sets forth, for the periods indicated, the high, low, average and period-end free-market exchange rate expressed in Mexican pesos per U.S. dollar. The average annual rates presented in the following table were calculated by using the average of the exchange rates on the last day of each month during the relevant period. The data provided in this table is based on noon buying rates published by the U.S. Federal Reserve Board for cable transfers in Mexican pesos. We have not restated the rates in constant currency units. All amounts are stated in pesos. We make no representation that the Mexican peso amounts referred to in this annual report could have been or could be converted into U.S. dollars at any particular rate or at all.

Except for the period from September through December 1982, during a liquidity crisis, the Mexican Central Bank has consistently made foreign currency available to Mexican private-sector entities (such as us) to meet their foreign currency obligations. Nevertheless, in the event of renewed shortages of foreign currency, we cannot assure you that foreign currency would continue to be available to private-sector companies or that foreign currency needed by us to service foreign currency obligations or to import goods could be purchased in the open market without substantial additional cost or at all.

Fluctuations in the exchange rate between the peso and the U.S. dollar will affect the U.S. dollar value of securities traded on the Mexican Stock Exchange, including the series B shares and, as a result, will likely affect the market price on the New York Stock Exchange of the ADSs that represent the series B shares. Such fluctuations will also affect the U.S. dollar conversion by the depositary of any cash dividends paid in pesos on series B shares represented by ADSs.

Investing in our series B shares and the ADSs involves a high degree of risk. You should consider carefully the following risks, as well as all the other information presented in this annual report, before making an investment decision. Any of the following risks, if they were to occur, could materially and adversely affect our business, results of operations, prospects and financial condition. Additional risks and uncertainties not currently known to us or that we currently deem immaterial may also materially and adversely affect our business, results of operations, prospects and financial condition. In either event, the market price of our series B shares and ADSs could decline significantly, and you could lose all or substantially all of your investment.

Risks Related to Our Business

Our results of operations are significantly influenced by the cyclical nature of the steel industry.

The steel industry is highly cyclical and sensitive to regional and global macroeconomic conditions. Global demand for steel as well as global production capacity levels significantly influence prices for our products, and changes in global demand or supply for steel in the future will likely impact our results of operations. The steel industry has suffered in the past, especially during downturn cycles, from substantial over-capacity. Currently, as a result of the increase in steel production capacity in recent years, there are signs of excess capacity in steel markets, which is impacting the profitability of the steel industry. Global steel prices decreased in 2013, 2014 and 2015, and in 2016 and 2017 global steel prices began to recover. We cannot give you any assurance as to prices of steel in the future.

We may not be able to pass along price increases for raw materials to our customers to compensate for fluctuations in price and supply.

Prices for raw materials necessary for production of our steel products have fluctuated significantly in the past and may do so in the future. Significant increases in raw material prices could adversely affect our gross profit. During periods when prices for scrap metal, iron ore, ferroalloys, coke and other raw materials have increased, our industry has historically sought to maintain profit margins by passing along increased raw material costs to customers by means of price increases. For example, prices of scrap metal in 2013 decreased approximately 6%, in 2014 increased approximately 7%, in 2015 decreased approximately 16%, in 2016 increased approximately 2% and in 2017 increased approximately 31%; prices of ferroalloys in 2013 decreased approximately 5%, in 2014 increased approximately 16%, in 2015 decreased approximately 9%, in 2016 decreased approximately 13% and in 2017 increased approximately 22%. We may not be able to pass along these and other cost increases in the future and, therefore, our profitability may be materially and adversely affected. Even when we can successfully increase our prices, interim reductions in profit margins frequently occur due to a time lag between the increase in raw material prices and the market acceptance of higher selling prices for

finished steel products. We cannot assure you that our customers will agree to pay increased prices for our steel products that compensate us for increases in our raw material costs.

We purchase our raw material requirements either in the open market or from certain key suppliers. Both scrap metal and ferroalloy prices are negotiated on a monthly basis with our suppliers and are subject to market conditions. We cannot assure you that we will be able to continue to find suppliers of these raw materials in the open market, that the prices of these materials will not increase or that the quality will remain the same. In addition, if any of our key suppliers fails to deliver or we fail to renew our supply contracts, we could face limited access to some raw materials, or higher costs and delays resulting from the need to obtain our raw materials requirements from other suppliers.

The inability to use our existing inventory in the future or impairments in the valuation of our inventory could adversely affect our business.

As of December 31, 2017, we had 136,541 metric tons of coke inventory, which is one of the principal raw materials used in blast furnaces. We have not used this raw material in recent years because our Lorain, Ohio blast furnace facility has been idle since 2008. We intend to start using coke as a substitute for coal in our productive process in our other plants in Mexico and the United States. However we cannot assure you that we will be able to effectively utilize such inventory.

We have assigned a fair market value of Ps. 1,037 million (U.S.$52.6 million) to our coke inventory. However, prices for coke have fluctuated significantly in the past and could continue to do so in the future and significant fluctuations in coke prices could adversely affect the value of our existing inventory.

The energy costs involved in our production processes are subject to fluctuations that are beyond our control and could significantly increase our costs of production.

Our production processes are dependent on adequate supplies of electricity and natural gas. A substantial increase in the cost of electricity or natural gas could have a material adverse effect on our gross profit. In addition, a disruption or curtailment in supply could have a material adverse effect on our production and sales. Prices for electricity increased approximately 9% in 2013 and 7% in 2014, decreased approximately 12% in 2015, in 2016 increased approximately 1.5% and in 2017 increased approximately 22%, and prices for natural gas increased approximately 16% in 2013 and 25% in 2014, decreased approximately 23% in 2015, increased approximately 8% in 2016 and increased approximately 22% in 2017. Moreover, energy costs constitute a significant and increasing component of our costs of operations. Our energy cost was 13.1% of our manufacturing conversion cost for 2017 compared to 13.5% for 2016, 13% for 2015, 14% for 2014, and 13% for 2013.

We pay special rates to the Mexican federal electricity commission (Comisión Federal de Electricidad or “CFE”) for electricity. We also pay special rates to Pemex, Gas y Petroquímica Básica, (“PEMEX”), the national oil company of Mexico, for natural gas used at our facilities in Mexico. We cannot assure you that these special rates will continue to be available to us or that these rates may not increase significantly in the future, particularly in light of recent energy reforms in Mexico. In the United States, we have contracts in place with special rates from the electric utilities. We cannot assure you that these special rates will continue to be available to us or that these rates may not increase significantly in the future. In certain deregulated electric markets in the United States, we have third party electric generation contracts under a fixed price arrangement. These contracts mitigate our price risk for electric generation from the volatility in the electric markets. In addition, we purchase natural gas from various suppliers in the United States and Canada. These purchase prices are generally established as a function of monthly New York Mercantile Exchange settlement prices. We also contract with different natural gas transportation and storage companies to deliver the natural gas to our facilities. In addition, we enter into futures contracts to fix and reduce volatility of natural gas prices both in Mexico and the United States, as appropriate. As of December 31, 2017, we have not entered into derivative financial instruments in Mexico, the United States or Brazil. We have not always been able to pass the effect of increases in our energy costs on to our customers and we cannot assure you that we will be able to pass the effect of these increases on to our customers in the future. We also cannot assure you that we will be able to maintain futures contracts to reduce volatility in natural gas prices. Changes in the price or supply of electricity or natural gas would materially and adversely affect our business and results of operations.

We face significant competition from other steel producers, which may adversely affect our profitability and market share.

Competition in the steel industry is intense, which exerts a downward pressure on prices, and, due to high start-up costs, the economics of operating a steel mill on a continuous basis may encourage mill operators to establish and maintain high levels of output even in times of low demand, which further decreases prices and profit margins. The recent trend of consolidation in the global steel industry may further increase competitive pressures on independent producers of our size, particularly if large steel producers formed through consolidations, which have access to greater resources than us, adopt predatory pricing strategies that decrease prices and profit margins. If we are unable to remain competitive with these producers, our profitability and market share would likely be materially and adversely affected.

A number of our competitors in Mexico, the United States and Canada have undertaken modernization and expansion plans, including the installation of production facilities and manufacturing capacity for certain products that compete with our products. As these producers become more efficient, we will face increased competition from them and may experience a loss of market share. In each of Mexico, the United States and Canada we also face competition from international steel producers. Increased international competition, especially when combined with excess production capacity, would likely force us to lower our prices or to offer increased services at a higher cost to us, which could materially reduce our profit margins.

Competition from other materials could significantly reduce demand and market prices for steel products.

In many applications, steel competes with other materials that may be used as steel substitutes, such as aluminum (particularly in the automobile industry), cement, composites, glass, plastic and wood. Additional substitutes for steel products could significantly reduce demand and market prices for steel products and thereby affect our results of operations.

A sudden slowdown in consumption in or increase in exports from China could have a significant impact on international steel prices, therefore affecting our profitability.

As demand for steel has surged in China, steel production capacity in that market has also increased, and China is now the largest worldwide steel producing country, accounting for approximately half of the worldwide steel production. Due to the size of the Chinese steel market, a slowdown in steel consumption in that market could cause a sizable increase in the volume of steel offered in the international steel markets, exerting a downward pressure on sales and margins of steel companies operating in other markets and regions, including us.

Implementing our growth strategy, which may include additional acquisitions, may adversely affect our operations.

As part of our growth strategy, we may seek to expand our existing facilities, build additional plants, acquire additional steel production assets, enter into joint ventures or form strategic alliances that we expect will expand or complement our existing business. If we undertake any of these transactions, they will likely involve some or all of the following risks:

We will require significant capital for acquisitions and other strategic plans, as well as for the maintenance of our facilities and compliance with environmental regulations. We may not be able to fund our capital requirements from operating cash flow and we may be required to issue additional equity or debt securities or obtain additional credit facilities, which could result in additional dilution to our shareholders. We cannot assure you that adequate equity or debt financing would be available to us on favorable terms or at all. If we are unable to fund our capital requirements, we may not be able to implement our growth strategy.

We intend to continue to pursue a growth strategy, the success of which will depend in part on our ability to acquire and integrate additional facilities. Some of these acquisitions may be outside of Mexico, the United States and Canada. Acquisitions involve a number of special risks, in addition to those described above, that could adversely affect our business, financial condition and results of operations, including the assumption of legacy liabilities and the potential loss of key employees. We cannot assure you that any acquisition we make will not materially and adversely affect us or that any such acquisition will enhance our business. We are unable to predict the likelihood of any additional acquisitions being proposed or completed in the near future or the terms of any such acquisitions.

We and our auditors have identified material weaknesses in our internal controls over financial reporting, for each of the last seven years, and if we fail to remediate these material weaknesses and achieve an effective system of internal controls, we may not be able to report our financial results accurately, and current and potential shareholders could lose confidence in our reporting, which would harm our business and the trading price of our Series B shares or the ADSs.

In connection with the preparation of our financial statements as of and for each of the years ended December 31, 2011, 2012, 2013, 2014, 2015, 2016 and 2017, we and our auditors identified material weaknesses (as defined under standards established by the Public Company Accounting Oversight Board, (United States of America)) in our internal controls over financial reporting (our management did not assess the effectiveness of our internal controls over financial reporting as of December 31, 2016). A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

Fiscal Year Ended December 31, 2011. On January 12, 2012, our audit and corporate practices committee (“Audit Committee”) received a formal complaint from the General Accounting and Treasury Services Manager of Republic Engineered Products, Inc. (“Republic”), stating that he had identified, during his review of the financial statements of SimRep and its subsidiaries for the year ended December 31, 2011, what he considered to be material accounting errors, and potential “management override of internal controls” at SimRep. In response, our Audit Committee instructed our internal audit department to perform a review, and subsequently engaged outside counsel to conduct an internal investigation concerning the accounting matters and potential management overrides of internal controls at SimRep. As a result of our investigation, we identified material weakness at SimRep, finding that, with respect to SimRep and its subsidiaries, management did not design and maintain effective controls relating to the year-end closing and financial reporting process, resulting in accounting errors with respect to the reconciliation of certain balance sheet accounts, and a failure to timely review and control the preparation and closing of SimRep’s consolidated financial statements. In addition, SimRep also had insufficient personnel resources and technical accounting and reporting expertise to appropriately address certain accounting and financial reporting matters in accordance with generally accepted accounting principles.

In addition, our external auditors notified our management that, during their audit of our consolidated financial statements for the year ended December 31, 2011, it identified what it considered to be, under standards established by the Public Company Accounting Oversight Board, material weaknesses in internal controls over financial reporting:

Fiscal Year Ended December 31, 2012. In our assessment of our internal controls over financial reporting for the year ended December 31, 2012, we and our external auditors identified the following material weaknesses:

Fiscal Year Ended December 31, 2013. In our assessment of our internal controls over financial reporting for the year ended December 31, 2013, we and our external auditors identified the following material weaknesses:

Fiscal Year Ended December 31, 2014. In our assessment of our internal controls over financial reporting for the year ended December 31, 2014, we and our external auditors identified the following material weaknesses:

Fiscal Year Ended December 31, 2015. In our assessment of our internal controls over financial reporting for the year ended December 31, 2015, we and our external auditors identified the following material weaknesses:

Fiscal Year Ended December 31, 2016. Our external auditors incorporated into their “Attestation Report of the Independent Registered Public Accounting Firms” for the year ended December 31, 2016, the following assessment of our internal controls, which included the following material weaknesses:

Fiscal Year Ended December 31, 2017. In our assessment of our internal controls over financial reporting for the year ended December 31, 2017, we and our external auditors identified the following material weaknesses:

Any failure to implement and maintain the needed improvements in the controls over our financial reporting, or difficulties encountered in the implementation of these improvements in our controls, could result in a material misstatement in our annual or interim financial statements that would not be prevented or detected, or cause us to fail to meet our reporting obligations under applicable securities laws. Any failure to improve our internal controls to address the identified weaknesses could result in our incurring substantial liability for not having met our legal obligation and could also cause investors to lose confidence in our reported financial information, which could have a material adverse impact on the trading price of our Series B shares or the ADSs.

For further details, see Items 15.B “Controls and Procedures—Management’s Annual Report on Internal Control Over Financial Reporting – Material Weaknesses,” 15.C “Attestation Report of the Independent Registered Public Accounting Firms” and 15.D “Changes in Internal Control over Financial Reporting.”

Tariffs, anti-dumping and countervailing duty claims imposed in the future could harm our ability to export our products outside of Mexico, and changes in Mexican tariffs on steel imports could adversely affect the profitability and market share of our Mexican steel business.

On October 14, 2014, the United States International Trade Commission (USITC) determined that the U.S. steel industry is materially injured by reason of imports of steel concrete reinforcing bars from Mexico, that are sold in the United States at less than fair value, and from Turkey, that are subsidized by the government of Turkey. As a result of the USITC’s affirmative determinations, the U.S. Department of Commerce issued an antidumping duty order on imports of this product from Mexico and a countervailing duty order on imports of this product from Turkey. The U.S. government imposed tariffs of 66.7% against imports for rebar from Deacero, S.A.P.I de C.V. and us and tariffs of 20.58% for rebar imports from all other producers in Mexico. On June 8, 2017, the US Department of Commerce issued a final resolution in which it determined that the tariff would be 0%.

Recent events, including the U.S. presidential election and Brexit in the U.K., have resulted in substantial regulatory uncertainty regarding international trade and trade policy. On March 1, 2018, U.S. President Trump announced a 25% tariff on all steel products and a 10% tariff on all aluminum products imported into the United States for an indefinite amount of time under Section 232 of the Trade Expansion Act. If formally enacted, such tariff may have a material effect on the demand and price of steel in Canada, Brazil, South Korea, Mexico, Russia and China (which include some of the top importers of steel products into the United States). In addition, the announced tariff may cause other countries and trading blocks to impose similar tariffs and trade barriers and could ignite a global trade war that limits the supply and restricts the free trade of steel.

Many of our products are subject to existing duties, tariffs, anti-dumping duties and quotas that may limit the quantity of some types of goods that we import into the United States. Furthermore, certain of our competitors may be better positioned than us to withstand or react to border taxes, tariffs or other restrictions on global trade and as a result we may lose market share to such competitors. Due to broad uncertainty regarding the timing, content and extent of any regulatory changes in the U.S. or elsewhere, we cannot predict the impact, if any, that these changes could have to our business, financial condition and results of operations. See “—Risks Related to Mexico—Developments in other countries could adversely affect the Mexican economy, our financial performance and the price of our shares.”

The operation of our facilities depends on good labor relations with our employees.

As of December 31, 2017, approximately 81% of our non-Mexican and 44% of our Mexican employees were members of unions. The compensation terms of our labor contracts are adjusted on an annual basis, and all other terms of the labor contracts are renegotiated every two years. In addition, collective bargaining agreements are typically negotiated on a facility-by-facility basis for our Mexican facilities. Any failure to reach an agreement on new labor contracts or to negotiate these labor contracts could result in strikes, boycotts or other labor disruptions. These potential labor disruptions could have a material and adverse effect on our business. Labor disruptions or significant negotiated wage increases could reduce our sales or increase our costs, which could in turn have a material adverse effect on our results of operations.

Operations at our Lackawanna, New York, facility depend on our continuing right to use certain property and assets of an adjoining facility and the termination of any such rights would interrupt our operations and have a material adverse effect on our results of operations and financial condition.

The operations of our Lackawanna facility depend upon certain arrangements and understandings relating to, among other things, our use of industrial water, compressed air, sanitary sewer and electrical power. These service and utility arrangements, initially entered into with the Mittal Steel Company N.V. and its affiliates (“Mittal Steel”), were effective through April 30, 2009, at which time Mittal Steel transferred its Lackawanna plant to Tecumseh Redevelopment, Inc. (“Tecumseh”). In December 2010, Tecumseh transferred a portion of the former Mittal Steel facility to Great Lakes Industrial Development, LLC (“GLID”). Upon the transfer to GLID, we entered into a written agreement with GLID regarding the provision of compressed air to our facility. This lease assures that compressed air will be provided to our facility during the lease term (initially two years with automatic one year renewals until terminated by either party) and grants us an option to purchase the equipment at various times and at stated prices, thereby providing us some flexibility while we consider the installation of our own compressed air system at our facility. The water pump that services our plant is located on property still owned by Mittal Steel and is maintained by Mittal Steel, which also continues to furnish industrial water to us on a month-to-month basis. The electric system which services the compressed air equipment, as well as the electric system which services the GLID property, has been re-routed through our electric meter located at a substation on the adjacent GLID property. We continue to pursue a written agreement with GLID covering our use of the electric substation and related equipment on the GLID property, as well as the sanitary sewer lift station on the GLID property that serves our facility, and a truck entrance and security monitoring equipment located on the GLID property. All of these rights are essential to the use and operation of our Lackawanna facility. It is our understanding that GLID has sold or is in the process of selling a portion of its property to an unrelated third party. In the event of a termination of any of our rights, either due to a failure to negotiate a satisfactory outcome with Mittal Steel, GLID or any third party to which it sells all or part of its facility, or for any other reason, we could be required to cease all or substantially all of our operations at the Lackawanna facility. Because we produce certain types of products in our Lackawanna facility that we do not produce in our other facilities, an interruption of production at our Lackawanna facility would result in a substantial loss of revenue and could damage our relationships with customers.

Our sales in the United States are concentrated and could be significantly reduced if one of our major customers reduced its purchases of our products or was unable to fulfill its financial obligations to us.

Our sales in the United States are concentrated among a relatively small number of customers. Any of our major customers can stop purchasing our products or significantly reduce their purchases at any time. During 2017, 2016, 2015, 2014 and 2013, sales to our ten largest customers in the United States accounted for approximately 68.7%, 62.1%, 56.8%, 51.4% and 40.6% of our consolidated revenues in the United States, respectively, and approximately 20%, 18.1%, 21.5%, 23.6% and 21.1% of our total consolidated revenues, respectively. A disruption in sales to one or more of our largest customers would adversely affect our cash flow and results of operations.

We cannot assure you that we will be able to maintain our current level of sales to our largest customers or that we will be able to sell our products to other customers on terms that are favorable to us or at all. The loss of, or substantial decrease in the amount of purchases by, or a write-off of any significant receivables from, any of our major customers would materially and adversely affect our business, results of operations, liquidity and financial condition.

Negative trends in the operation in our United States segment.

Our significant investment in the new Lorain, Ohio, electric arc furnace, built in response to the expected growth prospects in the United States oil and gas drilling and exploration industry, was a major contributor to the operational losses incurred in 2014 and 2015. Additionally, the U.S. $15 million (Ps. 310 million) investment in an electric bottom tapping furnace in 2012 at the Canton facility, intended to drive operational and productivity improvements, resulted in an initial challenge to master the new technology, which drove operational losses in 2013 in our United States segment. In response to the severe economic downturn in the energy exploration sector, which caused a significant drop in demand for seamless pipe, the entire Lorain facility was temporarily idled in

2015. This action halted the significant losses and allowed the business to focus on other industries which we continued to supply (mainly the automotive industry) where demand for our products remains strong. We cannot assure you that a new economic downturn in the future could not materially and adversely affect our business, results of operations, liquidity and financial condition.

Unanticipated problems with our manufacturing equipment and facilities could have an adverse impact on our business.

Our capacity to manufacture steel products depends on the suitable operation of our manufacturing equipment, including blast furnaces, electric arc furnaces, continuous casters, reheating furnaces and rolling mills. Breakdowns requiring significant time and/or resources to repair, as well as the occurrence of unexpected adverse events, such as fires, explosions or adverse meteorological conditions, could cause production interruptions that could adversely affect our results of operations.

We have not obtained insurance against all risks, and do not maintain insurance covering losses resulting from catastrophes or business interruptions. In the event we are not able to quickly and cost-effectively remedy problems creating any significant interruption of our manufacturing capabilities, our operations could be adversely affected. In addition, in the event any of our plants were destroyed or significantly damaged or its production capabilities otherwise significantly decreased, we would likely suffer significant losses, and capital investments necessary to repair any destroyed or damaged facilities or machinery would adversely affect our profitability, liquidity and financial condition.

If we are unable to obtain or maintain quality and environmental management certifications for our facilities, we may lose existing customers and fail to attract new customers.

Most of our automotive parts customers in Mexico and the United States require that we have ISO 9001, TS 16949 and ISO 14001 certification. All of the Mexican and U.S. facilities that sell to automotive parts customers are currently certified, as required. If the foregoing certifications are canceled, approvals are withdrawn or necessary additional standards are not obtained in a timely fashion, our ability to continue to serve our targeted market, retain our customers or attract new customers may be impaired. For example, our failure to maintain these certifications could cause customers to refuse shipments, which could materially and adversely affect our revenues and results of operations. We cannot assure you that we will be able to maintain these required certifications.

In the SBQ market, all participants must satisfy quality audits and obtain certifications in order to obtain the status of “approved supplier.” The automotive industry has put these stringent conditions in place for the production of auto parts to assure vehicle quality and safety. We currently are an approved supplier for our automotive parts customers. Maintaining these certifications is key to preserving our market share, because they can be a barrier to entry in the SBQ market, and we cannot assure you that we will be able to do so.

Failure to comply with environmental laws and regulations may result in fines, penalties or other significant liabilities or prevent us from operating our facilities.

Our operations are subject to a broad range of environmental laws and regulations governing our impact on air, water, soil and groundwater and exposure to hazardous substances. The costs of complying with and the imposition of liabilities pursuant to, environmental laws and regulation can be significant. Despite our efforts to comply with environmental laws and regulations, environmental incidents or events that negatively affect the operations of our facilities may occur. In addition, we cannot assure you that we will at all times operate in compliance with environmental laws and regulations. If we fail to comply with these laws and regulations, we may be assessed fines or penalties, be required to make large expenditures to comply with such laws and regulations, or be forced to shut down non-compliant operations and face lawsuits by third parties. In addition, environmental laws and regulations are becoming increasingly stringent and it is possible that future laws and regulations may require us to undertake material environmental compliance expenditures and require modifications in our operations. Furthermore, we need to maintain existing and obtain future environmental permits in order to operate our facilities. The failure to obtain necessary permits or consents or the loss of any permits could result in significant fines or penalties or prevent us from operating our facilities. We may also be subject, from time to time, to legal proceedings brought by private parties or governmental agencies with respect to environmental matters, including matters involving alleged property damage or personal injury that could result in significant liability. Certain of our facilities in the United States have been the subject of administrative action by federal, state and local environmental authorities. See Item 8. “Financial Information—Legal Proceedings.”

Greenhouse gas policies and regulations, particularly any binding restriction on emissions of greenhouse gases such as carbon dioxide, could negatively impact our steelmaking operations.

Our steel making operations in the United States and in Mexico use electric arc furnaces where carbon dioxide generation is primarily linked to energy use. In the United States, the Environmental Protection Agency has issued rules imposing inventory and reporting obligations to which some of our facilities are subject, and has also issued rules that will affect preconstruction permits for our facilities where increases in greenhouse gas pollutants are contemplated. The U.S. Congress has debated various measures for

regulating greenhouse gas emission (such as carbon dioxide) and may enact them in the future. Such laws and regulations may also result in higher costs for coking coal, natural gas and electricity generated by carbon-based systems (such as coal-fired electric generating facilities). Canada’s federal government is also considering various approaches for reducing greenhouse gas emissions, although we do not presently believe Republic’s Hamilton, Ontario facility would be significantly impacted by these efforts since it is not a steel-producing facility. Such future laws and regulations, whether in the form of a cap-and-trade emissions permit system, a carbon tax or other regulatory regime may have a negative effect on our operations. Climate change policy is evolving at regional, national and international levels, and political and economic events may significantly affect the scope and timing of climate change measures that are ultimately put in place. As signatories to the United Nations Framework Convention on Climate Change (the “UNFCCC”), Mexico, the U.S. and Canada became subject to the Paris Agreement to fight climate change, which was approved at the 21th session of the UNFCCC conference in 2015. However, in June 2017, U.S. President Trump stated that the United States would withdraw from the Paris Agreement, but may enter into a future international agreement related to greenhouse gas emissions. In August 2017, the U.S. State Department officially informed the United Nations of the intent of the United States to withdraw from the Paris Agreement. The United States’ adherence to the exit process is uncertain and/or the terms on which the United States may reenter the Paris Agreement or a separately negotiated agreement are unclear at this time. As a result, some of our facilities may ultimately be subject to future regional, provincial and/or federal climate change regulations to manage greenhouse emissions. More stringent greenhouse gas policies and regulations could adversely affect our business and results of operations.

If we are required to remediate contamination at our facilities we may incur significant liabilities.

Certain of our U.S. facilities are currently engaged in the investigation and/or remediation of environmental contamination. Most of these investigations relate to legacy activities by prior owners. We may in the future be subject to similar investigations or required to undertake similar remediation measures at other facilities. We recognize a liability for environmental remediation when it becomes probable that such remediation will be required and the amount can be reasonably estimated. As estimated costs to remediate change, or when new liabilities become probable, we adjust the record liabilities accordingly. However, due to the numerous variables associated with the judgments and assumptions that are part of these estimates and changes in governmental regulations and environmental technologies over time, we cannot assure you that our environmental reserves will be adequate to cover such liabilities or that our environmental expenditures will not differ significantly from our estimates or materially increase in the future. Failure to comply with any legal obligations requiring remediation of contamination could result in liabilities, imposition of cleanup liens and fines, and we could incur large expenditures to bring our facilities into compliance. See Item 8. “Financial Information—Legal Proceedings.”

We could incur losses due to product liability claims and may be unable to maintain product liability insurance on acceptable terms, if at all.

We could experience losses from defects or alleged defects in our steel products that subject us to claims for monetary damages. For example, many of our products are used in automobiles and light trucks and it is possible that a defect in one of these vehicles would result in product liability claims against us. In accordance with normal commercial sales, some of our products include implied warranties that they are free from defects, are suitable for their intended purposes and meet certain agreed upon manufacturing specifications. We cannot assure you that future product liability claims will not be brought against us, that we will not incur liability in excess of our insurance coverage, or that we will be able to maintain product liability insurance with adequate coverage levels and on acceptable terms, if at all.

Our controlling shareholder, Industrias CH, S.A.B. DE C.V., (Industrias CH) is able to exert significant influence on our business and policies and its interests may differ from those of other shareholders.

As of April 23, 2018, Industrias CH, which the chairman of our board of directors, Rufino Vigil González, controls, owned approximately 84% of our shares. Industrias CH nominated and elected all of the current members of our board of directors, and Industrias CH is in a position to exercise substantial influence and control over our business and policies, including the timing and payment of dividends. The interests of Industrias CH may differ significantly from those of other shareholders. Furthermore, as a result of the significant equity position of Industrias CH, there is currently limited liquidity in our series B shares and the ADSs.

We have had a number of transactions with our affiliates.

Historically, we have engaged in a number and variety of transactions on market terms with our affiliates, including entities that Industrias CH owns or controls. We expect that in the future we will continue to enter into transactions with our affiliates, and some of these transactions may be significant. See Item 7.B “Related Party Transactions.”

We depend on our senior management and their unique knowledge of our business and of the SBQ industry, and we may not be able to replace key executives if they leave.

We depend on the performance of our executive officers and key employees. Our senior management has significant experience in the steel industry, and the loss of any member of senior management or our inability to attract and retain additional senior management could materially and adversely affect our business, results of operations, prospects and financial condition. We believe that the SBQ steel market is a niche market where specific industry experience is key to success. We depend on the knowledge of our business and the SBQ industry of our senior management team, including Luis Garcia Limon, our chief executive officer. In addition, we attribute much of the success of our growth strategy to our ability to retain most of the key senior management personnel of the companies and businesses that we have acquired. Competition for qualified personnel is significant, and we may not be able to find replacements with sufficient knowledge of, and experience in, the SBQ industry for our existing senior management or any of these individuals if their services are no longer available. Our business could be adversely affected if we cannot attract or retain senior management or other necessary personnel.

Our tax liability may increase if the tax laws and regulations in countries in which we operate change or become subject to adverse interpretations.

Taxes payable by companies in the countries in which we operate are substantial and include income tax, value-added tax, excise duties, profit taxes, payroll related taxes, property taxes and other taxes. Tax laws and regulations in some of these countries may be subject to change, varying interpretation and inconsistent enforcement. Ineffective tax collection systems and continuing budget requirements may increase the likelihood of the imposition of onerous taxes and penalties which could have a material adverse effect on our financial condition and results of operations. In addition to the usual tax burden imposed on taxpayers, these conditions create uncertainty as to the tax implications of various business decisions. This uncertainty could expose us to significant fines and penalties and to enforcement measures despite our best efforts at compliance, and could result in a greater than expected tax burden. In addition, many of the jurisdictions in which we operate, including Mexico, have adopted transfer pricing legislation. If tax authorities impose significant additional tax liabilities as a result of transfer pricing adjustments, it could have a material adverse effect on our financial condition and results of operations. It is possible that tax authorities in the countries in which we operate will introduce additional revenue raising measures. The introduction of any such provisions may affect our overall tax efficiency and may result in significant additional taxes becoming payable. Any such additional tax exposure could have a material adverse effect on our financial condition and results of operations.

If we are unable to protect our information systems against data corruption, cyber-based attacks or network security breaches, our operations could be disrupted.

We are increasingly dependent on information technology networks and systems, including over the Internet, to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for digital marketing activities and electronic communications among us and our clients, suppliers and also among our subsidiaries and facilities. Security breaches or infrastructure flaws can create system disruptions, shutdowns or unauthorized disclosure of confidential information. If we are unable to prevent such breaches or flaws, our operations could be disrupted, or we may suffer financial damage or loss because of lost or misappropriated information.

Cyber threats are rapidly evolving and those threats and the means for obtaining access to information in digital and other storage media are becoming increasingly sophisticated. Cyber threats and cyber-attackers can be sponsored by countries or sophisticated criminal organizations or be the work of single “hackers” or small groups of “hackers.”

Insider or employee cyber and security threats are increasingly a concern for all companies, including ours. Nevertheless, as cyber threats evolve, change and become more difficult to detect and successfully defend against, one or more cyber-attacks might defeat our or a third-party service provider's security measures in the future and obtain the personal information of customers or employees. Employee error or other irregularities may also result in a defeat of security measures and a breach of information systems. Moreover, hardware, software or applications we use may have inherent defects of design, manufacture or operations or could be inadvertently or intentionally implemented or used in a manner that could compromise information security. A security breach and loss of information may not be discovered for a significant period of time after it occurs. While we have no knowledge of a material security breach to date, any compromise of data security could result in a violation of applicable privacy and other laws or standards, the loss of valuable business data, or a disruption of our business. A security breach involving the misappropriation, loss or other unauthorized disclosure of sensitive or confidential information could give rise to unwanted media attention, materially damage to our customer relationships and reputation, and result in fines, fees, or liabilities, which may not be covered by our insurance policies.

Risks Related to Global Economic Conditions

Global economic conditions, such as the latest financial crisis and economic recession that occurred during 2008 and 2009, may significantly impact our business.

The financial crisis that began in the United States in 2008 led to a global recession in which overall economic activity decreased across the world generally and in North America in particular. The corresponding reduction in demand across the economy in general and in the automotive, construction and manufacturing sectors in particular has reduced demand for steel products in North America and globally. These economic conditions significantly impacted our business and results of operations. Although demand, production levels and prices in certain segments and markets have recovered and stabilized to a certain degree, the extent, timing and duration of the recovery and potential return to pre-crisis levels remains uncertain. If global macroeconomic conditions deteriorate, however, the outlook for steel producers would be adversely affected. It is difficult to predict the duration or severity of a new global economic downturn, or to what extent it will affect us. An unsustainable recovery and persistently weak economic conditions in our key markets could depress demand for our products and adversely affect our business and results of operations. We sell our products to the automotive and construction-related industries, both of which reported substantially lower customer demand during and after the latest global recession. As a result, our operating levels declined compared to pre-recession levels. While some of our end-product markets, such as the automotive industry, experienced recoveries during 2013, 2014 and 2015, in 2016 we experienced a reduction in our sales, and in 2017 there was a slight increase in sales to the automotive industry compared to 2016. In addition to slackening demand by end consumers, we believe that some of our customers continue to experience and may experience in the future difficulty in obtaining credit or maintaining their ability to qualify for trade credit insurance, resulting in a further reduction in purchases and an increase in our credit risk exposure. Moreover, if a new global economic downturn occurs, we may face increased risk of insolvency and other credit related issues of our customers and suppliers, as we faced with our customers and suppliers particularly in industries that were hard hit by the latest recession, such as automotive, construction and appliance. Also, there is the possibility that our suppliers may face similar risks. A decrease in available credit may increase the risk of our customers defaulting on their payment obligations to us and may cause some of our suppliers to be delayed in filling or to be unable to fill our needs. The impact of global economic conditions on these industries may have a significant effect on our results of operations.

Additionally, if global economic conditions deteriorate, we may be required to undertake asset impairments, as we have been required to undertake in the past.

Because a significant portion of our sales are to the automotive industry, a decrease in automotive manufacturing could reduce our cash flows and adversely affect our results of operations.

Direct sales of our products to automotive assemblers and manufacturers accounted for approximately 63% of our net sales of SBQ in 2017. Demand for our products is affected by, among other things, the relative strength or weakness of the North American automotive industry. A reduction in vehicles manufactured in North America, the principal market for Republic’s SBQ steel products, would have an adverse effect on our results of operations. We also sell to independent forgers, components suppliers and steel service centers, all of which sell to the automotive market as well as other markets. Developments affecting the North American automotive industry may adversely affect us.

Our customers in the automotive industry continually seek to obtain price reductions from us, which may adversely affect our results of operations.

A challenge that we and other suppliers of intermediary products used in the manufacture of automobiles face is continued price reduction pressure from our customers in the automobile manufacturing business. Downward pricing pressure has been a characteristic of the automotive industry in recent years and it is migrating to all our vehicular markets. Virtually all automobile manufacturers have aggressive price reduction initiatives that they impose upon their suppliers, and such actions are expected to continue in the future. In the face of lower prices to customers, we must continue to reduce our operating costs in order to maintain profitability. We have taken and continue to take steps to reduce our operating costs to offset customer price reductions; however, price reductions are adversely affecting our profit margins and are expected to do so in the future. If we are unable to offset customer price reductions through improved operating efficiencies, new manufacturing processes, sourcing alternatives, technology enhancements and other cost reduction initiatives, or if we are unable to avoid price reductions from our customers, our results of operations could be adversely affected.

Sales may fall as a result of fluctuations in industry inventory levels.

Inventory levels of steel products held by companies that purchase our products can vary significantly from period to period. These fluctuations can temporarily affect the demand for our products, as customers draw from existing inventory during periods of low investment in construction and the other industry sectors that purchase our products and accumulate inventory during periods of high investment and, as a result, these companies may not purchase additional steel products or maintain their current purchasing volume. Accordingly, we may not be able to increase or maintain our current levels of sales volumes or prices.

Risks Related to Mexico

Adverse economic conditions in Mexico may adversely affect our financial performance.

A substantial portion of our operations are conducted in Mexico and our business is affected by the performance of the Mexican economy. The latest global credit crisis and the economic recession has had significant adverse consequences on the Mexican economy, which in 2009 contracted by 6.5%, in 2010 grew by 5.5%, in 2011 and 2012 grew by 3.9%, in 2013 grew by 1.1%, in 2014 grew by 2.3%, in 2015 grew 2.5%, in 2016 grew by 2.9% and in 2017 grew by 2% (according to preliminary figures of the Instituto Nacional de Estadística y Geografía (INEGI)), in terms of gross domestic production. Moreover, in the past, Mexico has experienced prolonged periods of economic crises, caused by internal and external factors over which we have no control. Those periods have been characterized by exchange rate instability, high inflation, high domestic interest rates, changes in oil prices, economic contraction, a reduction of international capital flows, balance of payment deficits, a reduction of liquidity in the banking sector and high unemployment rates. Decreases in the growth rate of the Mexican economy, or periods of negative growth, or increases in inflation may result in lower demand for our products. The Mexican government recently cut spending in response to a downward trend in international crude oil prices, and it may further cut spending in the future. These cuts could adversely affect the Mexican economy and, consequently, our business, financial condition, operating results and prospects. We cannot assure you that economic conditions in Mexico will not worsen, or that those conditions will not have an adverse effect on our financial performance.

Political, social and other developments in Mexico could adversely affect our business.

Political, social and other developments in Mexico may adversely affect our business. Social unrest, such as strikes, suspension of labor, demonstrations, acts of violence and terrorism in the Mexican states in which we operate could disrupt our financial performance. Additionally, the Mexican government has exercised, and continues to exercise, significant influence over the economy. Accordingly, Mexican federal governmental actions and policies concerning the economy, the regulatory framework, the social or political context, and state-owned and stated controlled entities or industries could have a significant impact on private sector companies and on market conditions, prices and returns of Mexican securities. In the past, governmental actions have involved, among other measures, increases in interest rates, changes in tax policies, price controls, currency devaluations, capital controls and limits on imports.

Currently, no single political party has a majority in either chamber of the Mexican Congress. The absence of a clear majority and the lack of alignment between the legislature and the administration could result in deadlock and prevent the timely implementation of political and economic reforms, which in turn could have an adverse effect on Mexican economic policy. We cannot assure you that the current political situation or future developments in Mexico, over which we have no control, will not have an adverse effect on our business, financial condition or results of operations. Further, we cannot assure you that any new government policies will not adversely affect our business, financial condition and results of operations.

The Mexican government has exercised, and continues to exercise, significant influence over the Mexican economy.

The Mexican federal government has exercised, and continues to exercise, significant influence over the Mexican economy. Accordingly, Mexican federal governmental actions and policies concerning the economy, state-owned enterprises and state controlled, funded or influenced financial institutions could have a significant impact on private sector entities in general and on us in particular, and on market conditions, prices and returns on securities of Mexican companies. The Mexican federal government occasionally makes significant changes in policies and regulations, and may do so again in the future. Actions to control inflation and other regulations and policies have involved, among other measures, increases in interest rates, changes in tax policies, price controls, currency devaluations, capital controls and limits on imports. Tax legislation in Mexico is subject to continuous change and we cannot assure you whether the Mexican government may maintain existing political, social, economic or other policies, or whether changes may have a material adverse effect on our financial performance.

Violence in Mexico may adversely impact the Mexican economy and have a negative effect on our financial performance.

Mexican drug related violence and other organized crime have escalated significantly since 2006, when the Mexican federal government began increasing the use of the army and police to fight drug trafficking. Drug cartels have carried out attacks largely directed at competing drug cartels and law enforcement agents, however they also target companies and their employees, including companies’ industrial properties, including through extortion, theft from trucks or industrial sites, kidnapping and other forms of crime and violence. This increase in violence and criminal activity has led to increased costs for companies in the form of stolen products and added security and insurance. Corruption and links between criminal organizations and authorities also create conditions that affect our business operations, as well as extortion and other acts of intimidation, which may have the effect of limiting the level of action taken by federal and local governments in response to such criminal activity. We cannot assure you that the levels of violent crime in Mexico, over which we have no control, will not have an adverse effect on the country’s economy and, as a result, on our financial performance.

Depreciation of the Mexican peso relative to the U.S. dollar could adversely affect our financial performance.

The peso historically has been subject to significant depreciation against the U.S. dollar. Depreciation of the Mexican peso relative to the U.S. dollar decreases a portion of our revenues in U.S. dollar terms, as well as increases the cost of a portion of the raw materials we require for production and any debt obligations denominated in U.S. dollars, and thereby may negatively affect our results of operations. The Mexican Central Bank may from time to time participate in the foreign exchange market to minimize volatility and support an orderly market. The Mexican Central Bank and the Mexican government have also promoted market-based mechanisms for stabilizing foreign exchange rates and providing liquidity to the exchange market, such as using over-the-counter derivatives contracts and publicly-traded futures contracts on the Chicago Mercantile Exchange. However, the Peso is currently subject to significant fluctuations against the U.S. dollar and may be subject to such fluctuations in the future. Since the second half of 2008, the value of the Mexican peso relative to the U.S. dollar has fluctuated significantly. According to the U.S. Federal Reserve Board, during this period the exchange rate registered a low of Ps. 9.91 to U.S.$1.00 in August 5, 2008, and a high of Ps. 20.84 to U.S.$1.00 in November 14, 2016. In 2017 the exchange rate registered a low of Ps. 17.48 to U.S.$1.00 and a high of Ps. 21.89 to U.S.$1.00.

A severe depreciation of the Mexican peso may also result in disruption of the international foreign exchange markets and may limit our ability to transfer to convert Mexican pesos into U.S. dollars and other currencies. While the Mexican government does not currently restrict, and since 1982 has not restricted the right or ability of Mexican or foreign persons or entities to convert Mexican pesos into U.S. dollars or to transfer other currencies out of Mexico, the Mexican government could institute restrictive exchange rate policies in the future.

Currency fluctuations or restrictions on transfer of funds outside Mexico may have an adverse effect on our financial performance, and could adversely affect the U.S. dollar value of the price of our Series B shares and the ADSs.

On December 17, 2015, a day after the U.S. Federal Reserve increased the target range for the federal funds rate in the United States by 25 basis points, the Mexican Central Bank increased the reference rate from 3.00% to 3.25% in an effort to counteract a sharp depreciation of the Mexican peso that could affect Mexico’s expected rate of inflation. On February 17, 2016, the Mexican Central Bank further increased the reference rate from 3.25% to 3.75%, and has been increasing the reference rate regularly since then, to 7.50% as of February 4, 2018. We cannot assure you that, as a result of future increases by U.S. Federal Reserve of the target range for the federal funds rate in the United States, the Mexican economy or the value of securities issued by Mexican companies will not be affected, including as a result of any precipitous unwinding of investments in emerging markets, depreciations and increased volatility in the value of their currency and higher interest rates.

High inflation rates in Mexico may affect demand for our products and result in cost increases.

Mexico has historically experienced high annual rates of inflation. The annual rate of inflation, as measured by changes in the Mexican national consumer price index (Índice Nacional de Precios al Consumidor) published by the INEGI was 4.0% for 2013, 4.1% for 2014, 2.1% for 2015, 3.4% for 2016 and 6.8% for 2017. High inflation rates could adversely affect our business and results of operations by reducing consumer purchasing power, thereby adversely affecting demand for our products, increasing certain costs beyond levels that we could pass on to consumers, and by decreasing the benefit to us of revenues earned if the inflation rate exceeds the growth in our pricing levels.

Developments in other countries could adversely affect the Mexican economy, our financial performance and the price of our shares.

The Mexican economy and the market value of Mexican companies may be, to varying degrees, affected by economic and market conditions globally, in other emerging market countries and major trading partners, in particular the United States. Although economic conditions in other countries may differ significantly from economic conditions in Mexico, investors’ reactions to adverse developments in other countries may have an adverse effect on the market value of securities of Mexican issuers or of Mexican assets. In recent years, for example, prices of both Mexican debt securities and equity securities decreased substantially as a result of developments in Russia, Asia, Europe and Brazil. Also, credit issues in the United States have in the past resulted in significant fluctuations in global financial markets, including Mexico.

In addition, in recent years economic conditions in Mexico have become increasingly correlated with economic conditions in the United States as a result of NAFTA, increased economic activity between the two countries, and the remittance of funds from Mexican immigrants working in the United States to Mexican residents. However, Donald Trump’s victory in the U.S. presidential election in November 2016, as well as the Republican Party maintaining control of both the House of Representatives and Senate of the United States in the congressional election, has generated volatility in the global capital markets and may create uncertainty regarding the future of NAFTA and trade between the U.S. and Mexico. On January 20, 2017, Donald Trump became president of the U.S. President Trump and the Trump administration have made comments suggesting that he intends to re-negotiate the free trade agreements that the U.S. is party to, including NAFTA, and to implement high import taxes. On March 1, 2018, President Trump announced a 25% tariff on all steel products and a 10% tariff on all aluminum products imported into the United States for an

indefinite amount of time under Section 232 of the Trade Expansion Act. In addition, leaders from the United States, Canada and Mexico also commenced discussions regarding NAFTA on January 23, 2018 in Montreal, Canada. After numerous rounds of discussion, there was no progress on divisive issues such as car manufacturing. Tariffs could impact the interconnected supply chain of many industries, including automobiles, and this could potentially harm NAFTA renegotiation talks. Moreover, under the terms of the NAFTA agreement, President Trump has the authority to withdraw from NAFTA with a six month notice. Because the Mexican economy is heavily influenced by the U.S. economy, the re-negotiation, or even termination, of NAFTA and/or other U.S. government policies that may be adopted by the new U.S. administration (which may result in regulatory gridlock or on the contrary, it could result in a major regulatory change) could have a material adverse effect on the Mexican economy, which, in turn, could affect our business, financial condition and results of operations.

Moreover, the recent debt crisis in the European Union, the August and September 2015 Chinese stock market crashes, changes in Chinese exchange rate policy, continuing concerns regarding the slowdown of the Chinese economy, recent terrorist attacks and recent sharp declines in the price of crude oil, may also affect the global and Mexican economies. We cannot assure you that events in other emerging market countries, in the United States or elsewhere will not adversely affect our financial performance.

We could be adversely affected by violations of the Mexican Federal Anticorruption Law in Public Contracting, the U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws.

The Mexican Federal Anticorruption Law (Ley Federal de Anticorrupción en Contrataciones Públicas), the U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws generally prohibit companies and their intermediaries from making improper payments to government officials and other persons for the purpose of obtaining or retaining business. There can be no assurance that our internal control policies and procedures will protect us from reckless or criminal acts committed by our employees or agents. Violations of these laws, or allegations of such violations, could disrupt our business and could have an adverse effect on our business, financial condition and results of operations.

Our financial statements are prepared in accordance with IFRS and therefore are not directly comparable to financial statements of other companies prepared under U.S. GAAP or other accounting principles.

All Mexican companies listed on the Mexican Stock Exchange must prepare their financial statements in accordance with IFRS which differs in certain significant respects from U.S. GAAP. Items on the financial statements of a company prepared in accordance with IFRS may not reflect its financial position or results of operations in the way they would be reflected had such financial statements been prepared in accordance with U.S. GAAP. Accordingly, Mexican financial statements and reported earnings are likely to differ from those of companies in other countries in this and other respects.

Mexico has different corporate disclosure and accounting standards than those in the United States and other countries.

A principal objective of the securities laws of the United States, Mexico and other countries is to promote full and fair disclosure of all material corporate information, including accounting information. However, there may be different or less publicly available information about issuers of securities in Mexico than is regularly made available by public companies in countries with more highly developed capital markets, including the United States. The disclosure standards imposed by the Mexican Stock Exchange may be different than those imposed by securities exchanges in other countries or regions such as the United States.

Risks Related to Brazil

Brazilian political and economic conditions, and the Brazilian government’s economic and other policies, may negatively affect demand for our products.

The Brazilian economy has been characterized by frequent and occasionally extensive intervention by the Brazilian government and unstable economic cycles. The Brazilian government has often changed monetary, taxation, credit, tariff and other policies to influence the course of Brazil’s economy. The Brazilian government’s actions to control inflation and implement other policies have at times involved wage and price controls, blocking access to bank accounts, imposing capital controls and limiting imports into Brazil.

Our results of operations and financial condition may be adversely affected by factors such as:

Brazilian markets have been experiencing heightened volatility due to the uncertainties derived from the ongoing Lava Jato investigation, which is being conducted by the Office of the Brazilian Federal Prosecutor, and its impact on the Brazilian economy and political environment. Members of the Brazilian federal government and of the legislative branch, as well as senior officers of the state-owned oil company Petróleo Brasileiro S.A. – Petrobras, or Petrobras, have faced allegations of political corruption. These government officials and senior officers allegedly accepted bribes by means of kickbacks on contracts granted by Petrobras to several infrastructure, oil and gas and construction companies. As a result of the ongoing Lava Jato investigation, a number of senior politicians, including congressman and officers of the major state-owned companies in Brazil resigned or have been arrested.

In addition, the Brazilian Congress opened impeachment proceedings against President Dilma Rousseff on December 2, 2015 for allegedly breaking budget laws as she increased economic stimulus during her re-election campaign last year. On April 17, 2016, the Brazilian Congress voted in favor of the admissibility of the impeachment proceedings. On August 31, 2016, the Brazilian Senate voted in favor of the dismissal of President Dilma Rousseff and the then-Vice-President Temer assumed office to complete the remainder of the presidential mandate. More recently, in May 2017, the development of the investigations conducted by the Federal Police Department and the General Federal Prosecutor’s Office has increased uncertainty with respect to the future prospects of the Brazilian market. Furthermore, although the Brazilian Superior Electoral Court (Tribunal Superior Eleitoral) in a 4 to 3 vote has recently acquitted Dilma Rousseff and Michel Temer of charges of illegal campaign financing that could annul the presidential election that took place in 2014 and ultimately could require President Michel Temer to vacate the presidential office, this decision may still be appealed to the Brazilian Supreme Court (Supremo Tribunal Federal). In addition, a number of requests for impeachment have been filed against Mr. Temer, as well as criminal charges by the Brazilian Federal Prosecutor’s Office, which could also result in his removal from office, after allegations surfaced that Mr. Temer had allegedly been leading a political corruption related criminal organization. Furthermore, recently a Brazilian federal appeals court unanimously upheld the conviction of former president Luís Inácio Lula da Silva on corruption charges uncovered by the Lava Jato operation, a decision which can still be appealed to the Brazilian Supreme Court. We cannot predict whether these investigations and lawsuits will bring about further economic and political instability or if new allegations against high officers of the Brazilian Federal Government will arise in the future. This situation has adversely affected, and we expect that they will continue to adversely affect, the Brazilian markets and trading prices of securities issued by Brazilian issuers. We cannot predict their effects on the Brazilian economy which could have a material adverse effect on us.

The potential outcome of these investigations and proceedings is uncertain, but they have adversely affected and we expect that they will continue to adversely affect the Brazilian markets and trading prices of securities issued by Brazilian issuers. We cannot predict whether the allegations or proceedings will lead to further political and economic instability or whether new allegations against government officials or other companies in Brazil will arise in the future. In addition, we can neither predict the outcome of any such allegations and proceedings nor their effect on the Brazilian economy.

In addition, the Brazilian steel sector is facing a severe crisis. According to the Brazilian Steel Institute, steel consumption fell by 14% in the first nine months of 2015. We believe this crisis is largely due to a sharp decrease in durable goods manufacturing, particularly motor vehicle production, which is depressing steel consumption and offsetting the positive impact of construction activity associated with the summer 2016 Olympic Games held in Rio de Janeiro. The crisis in the Brazilian steel sector could have a material and adverse effect on our Brazilian business segment.

Brazil has experienced extremely high rates of inflation in the past and has therefore implemented monetary policies that have resulted in one of the highest interest rates in the world. According to the IGP-M, a general price inflation index, the inflation rates in Brazil were, 5.5% in 2013, 3.7% in 2014, 10.5% in 2015, 7.2% in 2016 and 2.95% in 2017. In addition, according to the National Extended Consumer Price Index (Índice Nacional de Preços ao Consumidor Amplo), published by the IBGE, the Brazilian price inflation rates were 5.6% in 2013, 6.2% in 2014, 11.3% in 2015, 6.6% in 2016 and 2.95% in 2017. Despite the Brazilian Central Bank’s repeated increases of interest rates during the period from 2013 to 2015, the Brazilian price inflation rate (IPCA) has continued to increase, reaching 10.7% in 2015 (the highest level recorded since 2003), and reaching 6.3% for the twelve-month period ending December 31, 2016.

Inflation has eased back into the target range of 4.5% as consumer prices moderated to 3.6% in May, 2017, down from 9.3% a year before and a peak of 10.7% in late 2015. Hence, monetary authorities have adopted a pro-growth policy stance. The key rate has been cut by 3% since October 2016 to 10.25% in June 2017. Moreover, downward pressures on the currency have eased.

However, the real Brazilian currency (“BRL”) remains very sensitive to political developments. For example, it depreciated by -9% against the U.S. dollar the day after the Temer scandal surfaced. Although the disinflation process is expected to continue over the next months, allowing for further rate cuts, short-term risks should be closely monitored such as (i) the impact on prices of the approval of fiscal consolidation measures, (ii) the uncertain external environment and its impact on the currency and (iii) shocks on food prices stemming to a large extent from unfavorable weather conditions.

There have been significant fluctuations in the exchange rate between the Brazilian currency and the U.S. dollar and other currencies. For example, the Brazilian real depreciated 19.7% and 53.2% against the U.S. dollar in 2001 and 2002, respectively and appreciated 18.0%, 8.0%, 12.3%, 8.5% and 17.0% against the U.S. dollar in 2003, 2004, 2005, 2006 and 2007, respectively. In 2008, the Brazilian real depreciated again approximately 31.9% against the U.S. dollar. In 2009, the Brazilian real appreciated 25.3% against the U.S. dollar, while in December 31, 2010 the Brazilian real to U.S. dollar exchange rate was R$1.6662, according to the Brazilian Central Bank. In 2011, the Brazilian real depreciated by 13.6% against the U.S. dollar, from R$1.6510 in the beginning of the period to R$1.8758 by the end of the period, and in 2012 the Brazilian real went from R$1.8683 in the beginning of the year to R$2.0435 by the end of the period, amounting to a 9.4% depreciation against the U.S. dollar. In 2013, the Brazilian real went from R$2.0415 in the beginning of the year to R$2.3426 by the end of the period. In 2014, the Brazilian real went from R$2.3975 in the beginning of the year to R$2.6652 by the end of the period, corresponding to a 10.8% depreciation against the U.S. dollar.

However, during 2015, due to the poor economic conditions in Brazil, including as a result of political instability, the Brazilian real has devalued at a rate that is much higher than in previous years. On September 24, 2015, the Brazilian real fell to the lowest level since the introduction of the currency, at R$4.1949 per U.S.$1.00. In 2015, the Brazilian real depreciated 45%, reaching R$3.9048 per U.S.$1.00 on December 31, 2015. Conversely, in 2016, the Brazilian real went from R$4.0387 per U.S.$1.00 at the beginning of the year to R$3.2591 per U.S.$1.00 on December 31, 2016, corresponding to a 19.3% appreciation against the U.S. dollar. In 2017, the Brazilian real went from R$3.2591 per U.S.$1.00 at the beginning of the year to R$3.3080 per U.S.$1.00 on December 31, 2017, corresponding to a depreciation of 1.5% against the U.S. dollar. There can be no assurance that the Brazilian real will not depreciate or appreciate further against the U.S. dollar.

Overview

We are a diversified manufacturer, processor and distributor of SBQ steel and structural steel products with production and commercial operations in the United States, Mexico, Canada and Brazil. We believe that in 2013, 2014, 2015, 2016 and 2017 we were an important producer of SBQ products in both the United States and Mexico, in each case in terms of sales volume. We also believe that in 2013, 2014, 2015, 2016 and 2017 we were an important producer of structural and light structural steel products in Mexico in terms of sales volume.

Our SBQ products are used across a broad range of highly engineered end-user applications, including axles, hubs and crankshafts for automobiles and light trucks, machine tools and off-highway equipment. Our structural steel products are mainly used in the non-residential construction market and other construction applications.

We focus on the Mexican and U.S. specialty steel markets by providing high value added products and services from our strategically located plants. The quality of our products and services, together with cost benefits generated by our facility locations, has allowed us to develop long standing relationships with many of our SBQ clients, which include Mexico and U.S.-based automotive and industrial equipment manufacturers and their suppliers. In addition, our facilities located in the North West and Central parts of Mexico allow us to serve the structural steel and construction markets in those regions and South West California with an advantage in the cost of freight over competitors which do not have production facilities in such regions.

Our legal name is Grupo Simec, S.A.B. de C.V. and our commercial name for advertising and publicity purposes is Simec. We are a sociedad anónima bursátil de capital variable, organized under the laws of Mexico. We are domiciled in the city of Guadalajara, Jalisco, and our principal administrative office is located at Calzada Lázaro Cárdenas 601, Guadalajara, Jalisco, Mexico 44440. Our telephone number is +52-33-3770-6700.

Our History

Our steel operations commenced in 1969 when a group of families from Guadalajara, Jalisco, formed Compañía Siderúrgica de Guadalajara, S.A. de C.V. (“CSG”), a mini-mill steel company. In 1980, Grupo Sidek, S.A. de C.V. (“Sidek”), our former parent company, was incorporated and became the holding company of CSG. In 1990, Sidek consolidated its steel and aluminum operations into a separate subsidiary, Grupo Simec, S.A. de C.V., a Mexican corporation with limited liability, organized under the laws of Mexico.

In March 2001, Sidek consummated the sale of its entire approximate 62% controlling interest in our company to Industrias CH. In June 2001, Industrias CH increased its interest in us to 82.5% by acquiring additional shares from certain of our bank creditors that had converted approximately Ps. 1,185 million (U.S.$95.4 million) of our debt (U.S.$90.2 million of principal and U.S.$5.2 million of interest) into our common shares. Industrias CH subsequently increased its equity position in, us through various conversions of debt to equity and capital contributions, to an 84% interest.

In August 2004, we acquired the property, plant and equipment and the inventories, and assumed liabilities associated with the seniority premiums of employees, of the Mexican steel-making facilities of Industrias Ferricas del Norte S.A. (Corporacion Sidenor of Spain, or “Grupo Sidenor”) located in Apizaco, Tlaxcala and Cholula, Puebla. We refer to this acquisition as the “Atlax Acquisition.” Our total net investment in this transaction was approximately Ps. 1,589 million (U.S.$122 million) (excluding value added tax of approximately Ps. 208 million (U.S.$16 million) paid in 2004 and recouped from the Mexican government in 2005), funded with cash from operations, and a Ps. 247 million (U.S.$19 million) capital contribution from Industrias CH.

In July 2005, we and Industrias CH acquired 100% of the capital stock of Republic, a U.S. producer of SBQ steel. We acquired 50.2% of Republic’s stock through our majority owned subsidiary, SimRep, and Industrias CH purchased the remaining 49.8% through SimRep. We financed our portion of the Ps. 2,795 million (U.S.$245 million) purchase price principally through a loan we received from Industrias CH that we have repaid in full.

On October 9, 2006 we sold our share ownership in Administradora de Cartera de Occidente, S.A. de C.V. (“ACOSA”). ACOSA engages in the recovery of non-performing loans acquired pursuant to a public bidding process conducted by the Instituto de Protección al Ahorro Bancario in Mexico.

On November 24, 2007 we purchased 99.95% of the shares of three subsidiaries of Grupo TMM S.A de C.V. These three subsidiaries were TMM América, S.A. de C.V., TMM Continental, S.A. de C.V. and Mutimodal Doméstica, S.A. de C.V. Following the purchase, these companies have engaged in marketing steel. In February 2008, the names of these three companies were changed to CSG Comercial, S.A. de C.V., Comercializadora de Productos de Acero de Tlaxcala, S.A. de C.V. and Siderúrgica de Baja California, S.A. de C.V.

In 2007, the board of directors of CSG decided to spin-off CSG. CSG conveyed 87.4% of its stockholders equity to Tenedora CSG, S.A. de C.V, as the spun-off company. This corporate restructuring did not have a material effect on our consolidated financial statements.

On May 30, 2008, we acquired all the capital stock of Aceros DM and certain affiliated companies (“Grupo San”) for a total cost of approximately Ps. 8,730 million (U.S.$844 million at the exchange rate at that time). Grupo San is a long products steel mini-mill and the second-largest corrugated rebar producer in Mexico. Grupo San’s operations are based in San Luis Potosí, Mexico. Its plants have a production capacity of 700 thousand tons of finished products annually.

On July 29, 2008, the company acquired 100% of the shares of Aroproc, S. A. de C. V., Del-Ucral, S. A. de C. V., Qwer, S. A. de C. V. and Transporte Integral Doméstico, S.A. de C.V., subsidiaries of Grupo TMM, S. A. de C. V., to convert them into the operating manager of the iron and steel plants located in Mexico. On July 30 2008, these companies were renamed to Promotora de Aceros San Luis, S.A. de C.V., Comercializadora Aceros DM, S.A. de C.V., Comercializadora Msan, S.A. de C.V. and Productos Siderúrgicos de Tlaxcala, S.A. de C.V. respectively.

On December 26, 2008, the company acquired 99.95% of the shares of Northarc Express, S.A. de C.V., a subsidiary corporation of Grupo TMM, S.A. de C.V., to convert this company into the operating manager of iron and steel plants located in Mexico. On January 6, 2009, this company changed its name to Simec International 2, S.A. de C.V.

On February 5, 2009, Simec International 2, S.A. de C.V. divested assets and liabilities to three new wholly owned Mexican subsidiaries. As a consequence of such reorganization, Simec International 3, S.A. de C.V. now operates the Tlaxcala and Puebla facilities, Simec International 4, S.A. de C.V. and Simec International 5, S.A. de C.V jointly operate the San Luis de Potosí facilities, and Simec International 2, S.A. de C.V. kept the operation of the Guadalajara and Mexicali facilities.

In 2009 we incorporated two new wholly owned subsidiaries. Simec Acero, S.A. de C.V. distributes all Grupo Simec products in Mexico and Simec USA, Corp. is responsible for all export sales of our Mexican companies.

On May 12, 2009, we incorporated Pacific Steel Projects, Inc., a wholly owned subsidiary organized under the laws of the State of California whose purpose is to develop technology improvement projects for our Mexican facilities.

On August 10, 2009, Simec International, S.A. de C.V. divested assets and liabilities to four new wholly owned Mexican subsidiaries named Siminsa A, S.A. de C.V., Siminsa B, S.A. de C.V., Siminsa C, S.A. de C.V. and Siminsa D, S.A. de C.V. After the divesture, Siminsa A was merged into Simec International 2, Siminsa B was merged into Simec International 3, Siminsa C was merged into Simec International 4 and Siminsa D was merged into Simec International 5.

On November 10, 2009, Simec International 2, Simec International 3, Simec International 4 and Simec International 5 divested assets and liabilities to Simec Steel, Inc., a new wholly owned subsidiary organized under the laws of the State of California whose purpose is to provide financing to the Mexican companies of the group and to seek new investment opportunities.

On May 31, 2010 Arrendadora Simec, S.A. de C.V. divested assets, liabilities and equity to our subsidiary Corporacion ASL, S. A. de C.V. which assumed the operation of Arrendadora Simec, S.A. de C.V.

On June 28, 2010, our subsidiary Simec International 6, S.A. de C.V., whose purpose is to produce steel, was constituted. Simec International 6, S.A. de C.V. begun operations in November of 2010.

On June 30, 2010, Simec International, S.A. de C.V., divested assets and equity to our subsidiary Simec International 7, S.A. de C.V. Among the assets transferred the shares of Aceros DM were included.

On September 3, 2010 we formed a Brazilian entity denominated GV do Brazil Indústria e Comércio de Aço Ltda. On august 5, 2011 we acquired 1,300,000 square meters of land on Pindamonhangaba, São Paulo State, Brazil, and paid Ps. 121.1 million (U.S.$8 million) for the construction of a new steel facility. In November 2015, our steel plant in Brazil started operations. This facility has a production capacity of 450,000 tons of finished goods of rebar and wire, and 800 employees. We have already established contact with major local suppliers of raw materials. The next step is to attract the special steels market for the automotive and electro-welded wire derivatives products.

On October 21, 2010 in the Extraordinary Shareholders Meeting of Arrendadora Simec S.A. de C.V. the dissolution of the company was approved.

On November 2, 2010, we acquired 100% of the shares of Lipa Capital, LLC. The total cost of this acquisition was of Ps. 187 million (U.S.$15.2 million at the exchange rate at that time). On December 9, 2010, Lipa Capital, LLC merged to Simec International 6, S. A. de C. V.

On February 3, 2011, we, through two of our wholly owned subsidiaries (Solon Wire Processing LLC, and the newly formed Republic Memphis LLC), acquired certain plants, machinery and equipment from BCS Industries LLC and affiliates (“Bluff City Steel”), which was our customer and vendor. For these assets we paid Ps. 30.6 million (U.S.$2.5 million) in cash and forgave approximately Ps. 73.5 million (U.S.$6 million due) by Bluff City Steel to us.

On May 2, 2011 in Extraordinary Shareholders Meetings of Acero Transportes S.A. de C.V. and Acero Transportes San S.A. de C.V. (subsidiaries of Grupo San), authorized the merger two subsidiaries, whereby Acero Transportes S.A. de C.V. was merged into Acero Transportes San S.A. de C.V.

On May 20 and October 3, 2011 in Extraordinary Shareholders Meetings, Simec International 2, S.A. de C.V., Simec International 3 S.A. de C.V., Simec International 4 S.A. de C.V. and Simec International 5 S.A. de C.V., changed their address and tax authority to report to the State of California, USA, transforming them into incorporated companies in accordance with the laws and regulations of the State of California, USA.

On May 31, 2011 we sold our shares in Arrendadora del Norte de Matamoros S.A. de C.V. to Perfiles Comerciales Sigosa, S.A. de C.V. (subsidiary of ICH) for Ps. 42.5 thousand, paid in cash.

On September 1, 2011, the merger of Procesadora Industrial San S.A. de C.V. into Malla San S.A. de C.V. (subsidiaries of Grupo San) was authorized in their respective Extraordinary Shareholders Meetings.

On November 2011, Republic Steel, Inc. (a subsidiary of SimRep Corporation) entered into an agreement with an unrelated third-party “purchaser” for the factoring of specific accounts receivable in order to reduce the amount of working capital required to

fund accounts receivable. The agreement was amended on October 26, 2016, so that any party can terminate the agreement after giving seven days’ notice. On the sale date, the purchaser advances funds equivalent to 80% of the value of receivables. The maximum amount of outstanding advances related to the assigned receivables is U.S.$30 million (Ps. 620 million). Proceeds on the transfer reflect the face value of the account minus a discount. The remaining amount between the receivable balance and the advance is held in reserve by the purchaser. Payment of the funds held in reserve, minus a discount fee are made by the purchaser within four days of receipt of payment on collection of funds related to each assigned receivable. The discount fee, which generally ranges from 1% if paid within 30 days (of the advance date) to 3.75% if paid within 90 days, is recorded as a charge to interest expense in the Consolidated Statements of Comprehensive Income. The purchaser shall have no recourse against the Republic Steel, Inc. if payments are not received due to insolvency of an account debtor within 120 days of the invoice date. However, while the facility calls for the sale, assignment, transfer and conveyance of all rights, title and interests in the selected accounts receivable, the purchaser may put and charge-back any receivable not paid to the purchaser within 90 days of purchase for any reason besides insolvency of the account debtor. As collateral for the repayment of advances for receivables sold, the purchaser has a priority security interest in all accounts receivable of Republic Steel, Inc. Republic Steel, Inc. sold a face amount of Ps. 501.3 million (U.S.$25.4 million) and Ps. 427.7 million (U.S.$20.7 million) of accounts receivable to purchasers during the years ended December 31, 2017 and 2016, respectively. Discount fees incurred pursuant to this agreement were approximately Ps. 9.5 million (U.S.$0.5 million) and Ps. 5.6 million (U.S.$0.3 million) for the years ended December 31, 2017 and 2016, respectively. Of the face amount of accounts receivable sold to purchasers, Ps. 37.5 million (U.S.$1.9 million) and Ps. 55.8 million (U.S.$2.7 million) had not been collected by the purchaser at December 31, 2017 and 2016, respectively, and therefore, such amount at December 31, 2017, is subject to possible charge-back to us.

On December 30, 2011 Simec International 7, S.A. de C.V. sold to Corporación ASL S.A. de C.V. all of its shares in Corporación Aceros DM, S.A de C.V., comprising of a total of 627,305,446 shares (99.9% of the common stock) for a value of Ps. 3,200 million, comprised of a down payment of Ps. 63 million and the remaining of Ps. 3,137 million due on April 30, 2012. This transaction generated a tax loss of Ps. 7,860 million which amount under the Mexican Income Tax Law (Ley de Impuesto Sobre la Renta), may be deducted against future gains related to dispositions of securities. On January 30, 2012 Simec International 7, S.A. de C.V. filed a demand challenging the current law, which limits the deduction of this net loss related to shares sales. On September 24, 2013, the second district judge denied the shelter and protection of the federal courts against the company pursuant to Article 32, Section XVII of the Mexican Income Tax Law, arguing that constitutional guaranties were not violated. Dissatisfied with the decision, the company filed an application for review of such judgment with the Mexican Supreme Court of Justice. The Supreme Court resolved that the constitutionality of Article 32, Section XVII of the Mexican Income Tax Law was not violated arguing that the Income Tax Law does not violate the guaranties of tax fairness and proportionality under Article 31, section IV of the Mexican Constitution. As a result, tax losses of the company may only be applied against future gains related to dispositions of securities.

On August 1, 2012 in their respective extraordinary shareholders meetings of Abastecedora Siderúrgica, S.A. de C.V. and Aceros DM, S.A. de C.V. (subsidiaries of Grupo San) the merger of both companies was authorized, whereby Abastecedora Siderúrgica, S.A. de C.V. was merged into Aceros DM, S.A. de C.V.

On October 8, 2012 in their respective extraordinary shareholders meetings of Simec Steel, Inc., Simec International 2, Inc., Simec International 3, Inc. and Simec International 4, Inc., the merger of three subsidiaries was authorized, whereby Simec International 2, Inc., Simec International 3, Inc., Simec International 4, Inc. were merged into Simec Steel, Inc.

On October 30, 2012, we and our subsidiary Corporacion ASL, S.A. de C.V. purchased shares of a company called Orge S.A. de C.V. (Orge) for Ps. 27 million, on that same date, Corporacion ASL, S.A. de C.V. made a capital increase of Ps. 67 million, which proceeds were used for the payment of an outstanding liability of Orge. The shares acquired correspond to one Class “I,” series “B” share, which represents 0.01% of the shares of such class, and 53,564,127 Class “II,” series “L” shares, which represent 100% of the shares of such class. These shares are without par value and shares of Class “II” are restricted and confer limited voting rights and no power to appoint the management of the company, however the Board of Directors is comprised exclusively of officers and shareholders of us, therefore, from that date on, we consolidate the financial statements of Orge. Orge was incorporated on July 19, 2012 through a split and tax losses of Ps. 498 million were transferred. Before we acquired the shares, Orge had a loss on the sale of certain securities that will carry a tax loss of Ps. 1,700 million. Orge is engaged in the production of steel and began operating in October 2012.

On December 18, 2012 in an extraordinary shareholders meeting of Simec International 6, S.A. de C.V., the split of this company was approved and two new wholly owned Mexican subsidiaries were incorporated, under the names Simec International 8, S.A. de C.V. and Siminsa E, S.A. de C.V.

In May 2013, Malla San, S.A. de C.V., operator of the plant which produces mesh and wire derivatives in San Luis Potosi, split into two new entities, Malla San 1 S.A. de C.V. and Malla San 2 S.A. de C.V., and therefore ceased to exist.

On August 8, 2013, we and our subsidiary Simec International, S.A. de C.V. purchased shares of a company called Seehafen Operadora Maritima, S.A.P.I. de C.V. (Seehafen) for Ps. 44 million. The shares acquired correspond to (i) 500 ordinary, nominative

Class “I” shares, representative of the fixed portion of the capital stock of Seehafen, which represents 50% of the shares of such class and (ii) 99,000 nominative Class “II” shares, representative of the variable portion of the capital stock of Seehafen, which represents 100 % of the shares of such class. These shares are without par value and Class “II” shares confer no voting rights. The transactions described above were approved in an extraordinary shareholders meeting of Seehafen celebrated on the same date, which also approved its change of name to Simec International 9, S.A.P.I. de C.V. (Simec 9), the modification of its corporate purpose and the appointment of members to its Board of Directors, comprised exclusively of officers and shareholders of us, therefore, from that date on, we consolidate the financial statements of Simec 9. Seehafen was incorporated on August 3, 2012 through a split and tax losses of Ps. 983 million were transferred.

On November 20, 2013, the merger of Simec USA, Corporation and Simec International 5, Inc. was authorized in their respective extraordinary shareholders meetings, whereby the first entity subsisted and the second ceased to exist.

On November 30, 2013 and December 2, 2013, the merger of Compañía Siderúrgica del Pacífico, S.A. de C.V., Comercializadora Msan S.A. de C.V., Comercializadora de Productos de Acero de Tlaxcala, S.A. de C.V., Productos Siderúrgicos de Tlaxcala, S.A. de C.V., Comercializadora Simec, S.A. de C.V., Siminsa E, S.A. de C.V., and Siderúrgica de Baja California, S.A. de C.V. was authorized in their respective extraordinary shareholders meetings, whereby the first entity subsisted and the others ceased to exist.

On January 16, 2015, we entered into a cooperation agreement with the government of the State of Tlaxcala, Mexico, to build a new steel facility, which will have a production capacity of 600,000 tons of bar quality steel (SBQ). In October and December 2015, we acquired land adjacent to our existing plant in Tlaxcala, which will increase the extension to a total of 100 hectares. On October 20, 2015, we entered into an agreement with Danieli & Officine Meccaniche for the construction (excluding civil engineering) of the plant and the provision of all required equipment. The total budget for the project will be approximately U.S.$600 million (Ps. 12,398 million), which will be financed with our own resources. The start of steelmaking operations is scheduled for the month of May 2018 and an estimated pre-operating period of between six to eight months.

On January 20, 2015, we incorporated a new wholly-owned subsidiary named Aceros Especiales Simec Tlaxcala, S.A. de C.V., in which Grupo Simec, S.A.B. de C.V. holds 49,999 class “I” shares and Simec International, S.A. de C.V. holds one class “I” share.

On January 20, 2015, we incorporated a new wholly-owned subsidiary named Recursos Humanos de la Industria Siderúrgica de Tlaxcala, S.A. de C.V., in which Grupo Simec, S.A.B. de C.V. holds 49,999 class “I” shares and Simec International, S.A. de C.V. holds one class “I” share.

On March 21, 2015, we and our subsidiary Simec International, S.A. de C.V. purchased 2,500 class “I1”, ordinary, nominative and without par value shares of a company called RRLC, S.A.P.I. de C.V. (RRLC), representing the fixed portion of its capital stock, which represented 50% of the shares of such class, and 46,103 class “II”, non-voting, nominative, without par value shares of RRLC, representing the variable portion of its capital stock, which represented 100% of the shares of that class, in the aggregate amount of Ps. 18.6 million. RRLC was incorporated as a result of a spin-off of another company on December 11, 2014, with a tax loss of Ps. 311.5 million.

On October 30, 2015, our subsidiaries Simec International 7, S.A. de C.V. and Simec International, S.A. de C.V., acquired 25,000 class “I”, ordinary, nominative and without par value shares in a company called Grupo Chant, S.A.P.I. de C.V. (Chant), representing the fixed portion of its capital stock, which represented 50% of the shares of such class, and 1,000,000 class “II”, non-voting, nominative and without par value shares of Chant, representing the variable portion of its capital stock, which represented 100% of the shares of that class, in the aggregate amount of Ps. 167 million. Chant was incorporated as a result of a spin-off of another company on June 12, 2015, with a tax loss of Ps. 2,380 million.

On January 13, 2016, we incorporated a new wholly-owned subsidiary named GSIM de Occidente, S.A. de C.V., in which Grupo Simec, S.A.B. de C.V. holds 49,999 class “I” shares and Simec International, S.A. de C.V. holds one class “I” share.

On January 13, 2016, we incorporated a new wholly-owned subsidiary named Fundiciones de Acero Estructural, S.A. de C.V., in which Grupo Simec, S.A.B. de C.V. holds 49,999 class “I” shares and Simec International, S.A. de C.V. holds one class “I” share.

In August 2016 Republic Steel sold to a third party, at a price of U.S.$350 thousand (Ps. 7 million), the assets of the Memphis, Tennessee plant, which had been idle.

On December 5, 2017, Grupo Simec, S.A.B. de C.V. and Simec International 7, S.A. de C.V. (a subsidiary), acquired 2,000 Class "I" ordinary shares, nominative and without nominal value in a company called Señales del Norte S.A. de C.V., representing the

fixed portion of its capital stock, which represented 100% of the shares of that class and 3,908,782 class "II" shares, without voting rights, nominative, and without nominal value, which represented 100% of the variable portion of the share capital, in the aggregate amount of Ps. 122.7 million pesos, so that as of that date Señales del Norte SA de CV is consolidated in our financial statements. On March 13, 2018 we changed its name to "Siderúrgicos Noroeste S.A. de C.V. "

Principal Capital Expenditures

We continually seek to improve our operating efficiency and increase sales of our products through capital investments in new equipment and technology. These capital expenditures are financed primarily with funds that we segregate monthly from the results of operations generated by each facility.

We currently estimate capital expenditures for the year 2018 will be approximately Ps. 1,161.7 million (U.S.$58.9 million), consisting of capital expenditures in our facilities in Mexico. Nevertheless, this estimate is subject to certain uncertainties and actual capital expenditures in 2018 may differ significantly from such estimate.

In 2017, we spent Ps. 622.8 million (U.S.$31.6 million) on capital investments for Republic’s facilities, including Ps. 8.1 million (U.S.$0.4 million) at the Lorain, Ohio facility, Ps. 54.8 million (U.S.$2.8 million) at the Lackawanna, New York facility, Ps. 546.5 million (U.S.$27.7 million) at the Canton, Ohio facility, Ohio facility, Ps. 8.7 million (U.S.0.4 million) at the Solon, Ohio facility, and Ps. 4.7 million (U.S.$0.2 million) at the Massillon, Ohio, facility. We spent Ps. 2,394.5 million (U.S.$121.3 million) on capital improvements at our facilities in Mexico, including Ps. 1,525 million (U.S.$77.3 million) at the Apizaco facility, Ps. 3.5 million (U.S.$0.2 million) at the Mexicali facility, Ps. 106.8 million (U.S.$5.4 million) at the Guadalajara facility, and Ps. 759.2 million (U.S.$38.4 million) at the San Luis facilities. We also spent Ps. 22.2 million (U.S.$1.1 million) in our steel facility on Pindamonhangaba, Sao Paulo State, Brazil.

In 2016, we spent Ps. 816.6 million (U.S.$37.1 million) on capital investments for Republic’s facilities, including Ps. 691.6 million (U.S.$31.4 million) at the Lorain, Ohio facility, Ps. 2.8 million (U.S.$0.1 million) at the Lackawanna, New York facility, Ps. 105.3 million (U.S.$4.8 million) at the Canton, Ohio facility, Ohio facility, Ps. 15 million (U.S.0.7 million) at the Solon, Ohio facility, and Ps. 1.9 million (U.S.$0.1 million) at the Gary, Indiana, facility. We spent Ps. 2,169.3 million (U.S.$135.6 million) on capital improvements at our facilities in Mexico, including Ps. 2,006.1 million (U.S.$125.4 million) at the Apizaco facility, Ps. 1.2 million (U.S.$0.1 million) at the Mexicali facility, Ps. 26.4 million (U.S.$1.6 million) at the Guadalajara facility, and Ps. 135.6 million (U.S.$8.5 million) at the San Luis facilities. We also spent Ps. 114.3 million (U.S.$7.1 million) in our steel facility on Pindamonhangaba, Sao Paulo State, Brazil.

In 2015, we spent Ps. 0.4 million (U.S.$0.02 million) on capital investments for Republic, at the Lorain, Ohio facility. We spent Ps. 574.2 million (U.S.$35.9 million) on capital improvements at our facilities in Mexico, including Ps. 509.2 million (U.S.$31.8 million) at the Apizaco facility, Ps. 43.1 million (U.S.$2.7 million) at the Mexicali facility, Ps. 7.4 million (U.S.$0.5 million) at the Guadalajara facility, and Ps. 14.5 million (U.S.$0.9 million) at the San Luis facilities. We also spent Ps. 73.1 million (U.S.$4.6 million) in the construction of a new steel facility on Pindamonhangaba, Sao Paulo State, Brazil, which started operations in November 2015.

In the United States, Mexico and Brazil, we own and operate thirteen state-of-the-art steel making, processing and/or finishing facilities with a combined annual crude steel installed production capacity of 4.6 million tons and a combined annual installed rolling capacity of 4 million tons. We operate both mini-mill and integrated steel making facilities, which give us the flexibility to optimize our production and reduce production costs based on the relative prices of raw materials (e.g., scrap for mini-mills and iron ore for blast furnace).

We currently own and operate:

In 2017, we had net sales of Ps. 28.7 billion, gross profit of Ps. 4.7 billion and net income of Ps. 1.7 billion. In 2017, approximately 30% of our consolidated sales were in the United States and Canada, approximately 58% were in Mexico, approximately 11% were in Brazil and approximately 1% were exports to other markets outside the American Continent.

Business Strategy

We seek to further consolidate our position as a leading producer, processor and distributor of SBQ steel in North America and structural steel in Mexico. We also seek to expand our presence in the steel industry by identifying and pursuing growth opportunities and value enhancing initiatives. Our strategy includes:

Improving our cost structure.

We are continuing working to reduce our operating cost and non-operating expenses and plan to continue to do so by reducing overhead expenses and operating costs through sharing best practices among our operating facilities and maintaining a conservative capital structure.

Focusing on high margin and value-added products.

We prioritize the production of high margin steel products over volume and utilization levels. We plan to continue to base our production decisions on achieving relatively high margins.

Building on our strong customer relationships.

We intend to strengthen our long-standing customer relationships by maintaining strong customer service and proactively responding to changing customer needs.

Pursuing strategic growth opportunities.

We have successfully grown our business by acquiring, integrating and improving under-performing operations. In addition, we intend to continue to pursue acquisition opportunities that will allow for disciplined growth of our business and value creation for our shareholders. We also intend to pursue organic growth by reinvesting the cash generated by our operating activities to expand the capacity and increase the efficiency of our existing facilities.

Our Products

We produce a wide range of value-added SBQ steel, long steel and medium-sized structural steel products. In our Mexican facilities, we produce I-beams, channels, structural and commercial angles, hot rolled bars (round, square and hexagonals), flat bars, rebars, cold finished bars and wire rods. In our U.S. facilities, we produce hot rolled bars, cold finished bars, semi-finished tube rounds and other semi-finished trade products. In our Brazil facility, we produce rebars. The following is a description of these products and their main uses:

The following table sets forth, for the periods indicated, our sales volume for basic steel products.

Steel Product Sales Volume

Sales and Distribution

We sell and distribute our steel products throughout North America. We also export steel products from Mexico to Central and South America and Europe. In 2017, approximately 35% of our steel product sales in tons represented SBQ steel products, of which we sold 65% to the auto part industry, 20% to service centers, 1% for hand tools and the remaining 14% to other industries.

In 2017, direct sales in tons to the automotive industry increased by 6% compared to 2016. In 2016, direct sales in tons to the automotive industry decreased by 23% compared to 2015. In 2015, direct sales in tons to the automotive industry increased by 18% compared to 2014. In 2014, direct sales in tons to the automotive industry increased by 44% compared to 2013. In 2013, direct sales in tons to the automotive industry decreased by 16% compared to 2012. In 2013, 2014, 2015, 2016 and 2017 sales in tons to the energy sector accounted 0.5%, 10%, 0.01%, 0.1% and 0.5%, respectively, of our sales of SBQ steel products.

The following table sets forth, for the periods indicated, our Mexico, U.S., Canada and Brazil product sales as a percentage of our total product sales in tons.

Steel Product Sales By Region

During 2017, approximately 18.5% of our sales by volume came from the U.S. segment, with almost 100% of such sales representing SBQ product and 14.4% of our sales by volume came from the Brazil segment. The Mexican segment represents approximately 67.1% of our sales by volume, with SBQ products representing approximately 35% of such sales and the remainder representing commercial steel products.

Approximately 75% of our sales in the United States and Canadian markets come from contractual long-term agreements that establish minimum quantities and prices, which are adjustable based on fluctuations of prices of key production materials. The remainder of our sales in the United States and Canadian markets are spot sales either directly to end customers through our sales force or through independent distributors. We sell to customers in the United States and Canadian markets through a staff of professional sales representatives and sales technicians located in the major manufacturing centers of the Midwest, Great Lakes and Southeast regions of the United States.

We sell to the Mexican market through a group of approximately 100 independent distributors, who also carry other steel companies’ product lines, and through our wholly-owned distribution center in Guadalajara. Our sales force and distribution center are an important source of information concerning customer needs and market developments. By working through our distributors, we believe that we have established and can maintain market leadership with small-and mid-market end-users throughout Mexico. We believe that our domestic customers are highly service-conscious.

We distribute our exports outside North America primarily through independent distributors who also carry other product lines. In addition, we have three full-time employees in Mexico dedicated exclusively to exports.

During 2017 and 2016, we received orders for our products in our Mexican facilities on average approximately two weeks before producing those products. We generally fill orders for our U.S. and Canadian SBQ steel products within one to 12 weeks of the order depending on the product, customer needs and other production requirements. Customer orders are generally cancelable without penalty prior to finishing size rolling and depending on customers’ changing production schedules. Accordingly, we do not believe that backlog is a significant factor in our business. A substantial portion of our production is ordered by our customers prior to production. We cannot assure you that significant levels of preproduction sales orders will continue.

In our Republic plants, we have long term relationships with most of our major customers, in some cases for 10 to 20 years or longer. Our major direct and indirect customers include: leading automotive and industrial equipment manufacturers General Motors Corporation, Ford Motor Company, Chrysler LLC, Honda of America Mfg, Inc. and Nissan North America, Inc.; first tier suppliers to

automotive and industrial equipment manufacturers such as American Axle & Manufacturing Holdings, Inc. and Neexteer, NSK and NTN Driveshafts, Inc.; service centers which include AM Castle & Co., Earle M. Jorgensen Co., and Eaton Steel Bar Company.

Our U.S. and Canadian facilities are strategically located to serve the majority of consumers of SBQ products in the United States. Our U.S. and Canadian facilities ship products between their mills and finished products to customers by rail and truck. Customer needs and location, determine the type of transportation used for deliveries. The proximity of our rolling mills and cold finishing plants to our U.S. customers allows us to provide competitive rail and truck freight rates and flexible deliveries in order to satisfy just-in-time and other customer manufacturing requirements. We believe that the ability to meet the product delivery requirements of our customers in a timely and flexible fashion is a key to attracting and retaining customers as more SBQ product consumers reduce their in-plant raw material inventory. We optimize freight costs by using our significantly greater scale of operations to maintain favorable transportation arrangements, continuing to combine orders in shipments whenever possible and “backhauling” scrap and other raw materials.

Our plant in Brazil began production in June 2015 with 30,000 tons produced and 4,000 tons shipped in 2015, all of which correspond to rebar. Our main objective is to sell our products through independent distributors, targeting the construction market by providing quality service, a key factor in attracting and retaining customers.

Notwithstanding, our sales policy in Brazil has been well accepted by our customers and, even in the midst of a global crisis, our sales have begun to increase steadily, opening us a place in the steel Market in Brazil.

Our major customers in 2017 include: Risatec Distribuidor, Marson Com, Fav Comercio de Ferr, Udiaco Comercio e In, Acos Sao Carlos Come, J G Ind. Metalurgica, Comercial Litoranea, Globoferros Comercio and Paranaferros Parana.

Competition

Competition in the steel industry is significant. Competition in the steel industry exerts a downward pressure on prices, and, due to high start-up costs, the economics of operating a steel mill on a continuous basis may encourage mill operators to establish and maintain high levels of output even in times of low demand, which further decreases prices and profit margins. The recent trend of consolidation in the global steel industry may further increase competitive pressures on independent producers of our size, particularly if large steel producers formed through consolidations, which have access to greater resources than us, adopt predatory pricing strategies that decrease prices and profit margins. If we are unable to remain competitive with these producers, our profitability and market share would likely be materially and adversely affected.

A number of our competitors in the United States, Canada and Mexico have undertaken modernization and expansion plans, including the installation of production facilities and manufacturing capacity for certain products that compete with our products. As these producers become more efficient, we will face increased competition from them and may experience a loss of market share. In each of Mexico, the United States and Canada we also face competition from international steel producers. Increased international competition, especially when combined with excess production capacity, would likely force us to lower our prices or to offer increased services at a higher cost to us, which could materially reduce our profit margins.

Mexico

We compete in the Mexican domestic market and in its export markets for non-flat steel products primarily on the basis of price and product quality. In addition, we compete in the domestic market based upon our responsiveness to customer delivery requirements. The flexibility of our production facilities allows us to respond quickly to the demand for our products. We also believe that the geographic locations of our various facilities throughout Mexico and variety of products help us to maintain our competitive market position in Mexico and in the southwestern United States. We believe that our Mexicali mini-mill, one of the closest mini-mills to the southern California market, is competitive in terms of production and transportation costs in northwestern Mexico and southern California.

We believe that our competitors’ closest plants to the southern California market are: Nucor, Corporation, located in Plymouth, Utah; Commercial Metals Company, located in Meza, Arizona; Thyssenkrupp Steel North America, Inc., located in Santa Fe Springs, California; Deacero, S.A. de C.V. (“Deacero”), located in Saltillo, Coahuila, México and Gerdau Corsa, S.A.P.I. de C.V. (“Gerdau Corsa”), located in Tijuana, Baja California, Mexico. We believe that we have an advantage over certain competitors due to the labor cost in our Mexican operations.

In 2017, we sold approximately 179,483 tons of I-beams, channels and angles at least three inches in width which represented approximately 8.6% of our total finished product sales for the year. In 2016, we sold approximately 208,660 tons of I-beams, channels and angles at least three inches in width which represented approximately 10% of our total finished product sales for the year. We

believe that the domestic competitors in the Mexican market for structural steel are Gerdau Corsa, Deacero, and Siderúrgica del Golfo, S.A. de C.V. (a wholly-owned subsidiary of Industrias CH). We estimate that our share of Mexican production of structural steel was 20.6% in 2017 and 24.1% in 2016, according to information provided by the Cámara Nacional de la Industria del Hierro y del Acero (CANACERO).

In 2017, we sold approximately 859,427 tons of hot rolled and cold finished steel bars and 894,062 tons in 2016. Our other major product lines are rebar and light structural steel (angles less than three inches in width and flat bar), for which our share of domestic production was 14% and 21%, respectively, in 2017 and 14% and 27%, respectively, in 2016. Rebar and light structural steel together accounted for approximately 963,802 tons, or 46%, of our total production of finished steel products in Mexico, the United States and Brazil in 2017. Rebar and light structural steel together accounted for approximately 895,988 tons, or 43%, of our total production of finished steel products in Mexico, the United States and Brazil in 2016. We compete in the Mexican market with a number of producers of these products, including Deacero, Talleres y Aceros, S.A., Grupo Acerero, S.A. de C.V., Nucor Corporation, ArcelorMittal Lazaro Cardenas, S.A. de C.V., Ternium Mexico, S.A. de C.V. and Gerdau Corsa.

We believe that we have been able to maintain our domestic market share and profitable pricing levels in Mexico in part because the central Mexico sites of the Guadalajara, Apizaco, Cholula and San Luis facilities afford us cost advantages relative to certain U.S. producers when shipping to customers in central and southern Mexico, and our flexible production facility has given us the ability to ship specialty products in relatively small quantities with short lead times. The Mexicali mini-mill has helped to increase sales in northwestern Mexico and the southwestern United States because its proximity to these areas reduces our freight costs.

United States and Canada

In the United States and Canada, we compete primarily with both domestic SBQ steel producers and importers. Our U.S. domestic competition for hot-rolled engineered bar products is both large U.S. domestic steelmakers and specialized mini-mills. Non-U.S. competition may impact segments of the SBQ market, particularly where certifications are not required, and during periods when the U.S. dollar is strong compared with foreign currencies.

The principal areas of competition in our markets are product quality and range, delivery reliability, service and price. Special chemistry and precise processing requirements characterize SBQ steel products. Maintaining high standards of product quality, while keeping production costs low, is essential to our ability to compete in our markets. The ability of a manufacturer to respond quickly to customer orders currently is, and is expected to remain, important as customers continue to reduce their in-plant raw material inventory.

We believe our principal competitors in the United States market, depending on the product, include Nucor, Corporation, Niagara LaSalle, Corporation, Charter Steel, Inc., Steel Dynamics, Inc., The TimkenSteel Corporation and Gerdau.

Brazil

Our main competitors in the Brazilian market: Aperam, ArcelorMittal Brazil, CSN, Gerdau, Sinobras, Thyssenkrupp CSA; Usiminas, VSB tubes, V & M do Brasil, Villares Metals and Votorantim.

The brazilian steel industry is comprised of 14 private companies, controlled by 11 business groups and operating 30 mills in 10 brazilian states, making Brazil the 8th largest producer in the world.

The privatization of steel companies, finalized in 1993, brought a significant flow of capital into the sector, with diverse shareholder composition. Thus, many steel companies came to be part of industrial and/or financial groups, with their interests in steelmaking unfolding into related activities, aiming to improved economies of scale and competitiveness.

Plants in Sao Paulo: 

In 2017 there was a merger between Votorantim Aço and ArcelorMittal. The Brazilian unit of ArcelorMittal expects to conclude the takeover of rival Votorantim Siderurgia SA in the second quarter of 2018 to become the country’s largest long steel producer, with a capacity in Brazil of up to 6 million tons per year. ArcelorMittal expects to conclude the asset sales demanded by the country’s antitrust watchdog Cade to approve the takeover by April, 2018.

Certifications

ISO is a worldwide federation of national standards bodies which have united to develop internationally accepted standards so that customers and manufacturers have a system in place to provide a product of known quality and standards. The standards set by ISO cover every facet of quality from management responsibility to service and delivery. We believe that adhering to the stringent ISO procedures not only creates efficiency in manufacturing operations, but also positions us to meet the strict standards that our customers require. We are engaged in a total quality program designed to improve customer service, overall personnel qualifications and team work. The facilities at Apizaco and Cholula have received ISO/TS 16949:2009 certification from International Quality Certifications covering the period from December 20, 2017 to September 14, 2018.

As of March 19, 2018, two plants of Republic Steel are certified to ISO9001:2015 and IATF16949:2016. In the case of our plants in Canton and Lackawanna, the current certification is effective until February 2021. The Massillon Plant is certified to TS16949, and the current certification is effective until June 2018, and is in the process of being recertified to the IATF 16949 standard.  By the end of 2018, we expect all plants to be certified to ISO9001:2015 and IATF16949:2016. The plant in Solon is certified to ISO 9001:2015, and the current certification is effective until January 2021. The ISO/TS 16949:2009 standard, developed by the International Automotive Task Force, is the result of the harmonization of the supplier quality requirements of vehicle manufacturers worldwide and provides for a single quality management system of continuous improvement, defect prevention and reduction of variation and waste in the supply chain. It places greater emphasis on management’s commitment to quality and customer focus. ISO 9001 is a set of international quality control standards for management and practices.

Through these certifications, Republic’s Environmental, Health & Safety Management System is structured upon training, communication, employee participation, document control, objective and target setting, and management’s periodic reviews to implement our commitments to environmental protection and providing a safe and clean workplace. Most of the automotive customers of our Republic facilities require ISO 14001 certification.

Raw Materials

Prices for raw materials necessary for production of our steel products have fluctuated significantly in the past and significant increases in raw material prices could adversely affect our profit margins. During periods when prices for scrap metal, iron ore, ferroalloys, coke and other raw materials have increased, our industry has historically sought to maintain profit margins by passing along increased raw materials costs to customers by means of price increases. For example, prices of scrap metal decreased approximately 6% in 2013, increased approximately 7% in 2014, decreased approximately 16% in 2015, increased approximately 2% in 2016 and increased approximately 30.8% in 2017 and prices of ferroalloys decreased approximately 5% in 2013, increased approximately 16% in 2014, decreased approximately 9% in 2015, decreased approximately 13% in 2016 and increased approximately 22% in 2017. We may not be able to pass along these and other cost increases in the future and, therefore, our profitability may be materially and adversely affected. Even when we can successfully increase our prices, interim reductions in profit margins frequently occur due to a time lag between the increase in raw material prices and the market acceptance of higher selling prices for finished steel products. We cannot assure you that our customers will agree to pay increased prices for our steel products that compensate us for increases in our raw material costs.

We purchase our raw material requirements either in the open market or from certain key suppliers. We cannot assure you that we will be able to continue to find suppliers of these raw materials in the open market, that the prices of these materials will not increase or that the quality will remain the same. In addition, if any of our key suppliers fails to deliver or we fail to renew our supply contracts, we could face limited access to some raw materials, or higher costs and delays resulting from the need to obtain our raw materials requirements from other suppliers.

In 2017, our cost of sales in Mexico, as a percentage of sales in Mexico, was 78%, compared to our U.S. operations where our cost of sales, as a percentage of sales in the United States, was 93%, as a percentage of sales in Brazil, was 89% and our consolidated cost of sales, as a percentage of consolidated sales, was 83%. The higher cost of sales of Republic facilities is mainly a result of higher labor costs prevailing in our U.S. operations, and the higher costs of the raw materials that our U.S. operations use in the production of SBQ steel.

Scrap metal, electricity, iron ore, ferroalloys, electrodes and refractory products are the principal materials that we use to manufacture our steel products.

Scrap metal. Scrap metal is among the most important components for our steel production and accounted for approximately 59% of our consolidated manufacturing conversion cost in 2017 (64% of the manufacturing conversion cost in our Mexico operations and 47% of the manufacturing conversion cost in our U.S. operations), compared to 56% of our consolidated manufacturing conversion cost in 2016 (65% of the manufacturing conversion cost in our Mexico operations and 37% of the manufacturing conversion cost in our U.S. operations). Scrap metal is principally generated from automobile, industrial, naval and railroad industries. The market for scrap metal is influenced by availability, freight costs, speculation by scrap brokers and other conditions largely beyond our control. Fluctuations in scrap costs directly influence the cost of sales of finished goods.

We purchase raw scrap from dealers in Mexico and the San Diego area, and we process the raw scrap into refined scrap metal at our Guadalajara, San Luis, Mexicali and Apizaco facilities. We meet our refined scrap metal requirements through: (i) our wholly-owned scrap processing facilities, which in the aggregate provided us with approximately 19.1% and 9.3% of our refined scrap tonnage in 2017 and 2016, respectively, and (ii) purchases from third party scrap processors in Mexico and the southwestern United States, which, in the aggregate, provided us with approximately 72.2% and 8.7%, respectively, in 2017 and approximately 83.0% and 7.7%, respectively, in 2016 of our refined scrap metal requirements. We are a large scrap collector in the Mexicali, Tijuana and Hermosillo regions, and, by primarily dealing directly with small Mexican scrap collectors, we believe we have been able to purchase scrap at prices lower than those in the international and Mexican markets. We purchase scrap on the open market through a number of brokers or directly from scrap dealers for our U.S. and Canadian facilities. We do not depend on any single scrap supplier to meet our scrap requirements.

Ferroalloys, Electrodes and Refractory Products. In our Mexican operations, ferroalloys, electrodes and refractory products collectively accounted for approximately 12% of our manufacturing conversion cost in 2017, compared to 13% in 2016, and they accounted for 16% of our manufacturing conversion cost in 2017, compared to 16% in 2016 in our U.S. and Canadian facilities.

Ferroalloys are essential for the production of steel and are added to the steel during manufacturing process to reduce undesirable elements and to enhance its hardness, durability and resistance to friction and abrasion. For our Mexican operations, we buy most of our manganese ferroalloys from Compañía Minera Autlán, S.A., Elmet, S.A. de C.V., Ferroatlántica de México, S.A. de C.V., Marco Metales de Mexico, S. de R.L. de C.V., Possehl México, S.A. de C.V. and Distribuidora de Aleaciones y Metales, S.A. de C.V. Our U.S. and Canadian facilities purchase most of their ferroalloys from Affival, Duferco Steel, Globe Met., Gottlieb, Kennecott, Rusian Ferro, Traxys, Vale Americas, Minerais U.S. LLC and Glencore LTD.

We obtain electrodes used to melt raw materials from Graftech Comercial de Mexico, S.A. de C.V., Heg Limited and Graphite Cova GmbH. Our U.S. and Canadian facilities purchase most of their electrodes from SGL Carbon, Showa Denko Carbon, SK Carbon and E. J. Bognar Inc.

Refractory products include firebricks, which line and insulate furnaces, ladles and other transfer vessels. We purchase our refractory products for our Mexican operations from Vesuvius de México, S.A. de C.V., Magnesita Refractories México, S.A. de C.V., Magna Refractarios México, S.A. de C.V., Refratechnik Steel GmbH and Puyang Refractories Group Co., LTD. Our U.S. and Canadian facilities purchase most of their refractory products from Inc - RHI, Vesuvius USA, Corp., Nock & Son Co.-Minteq, Magna Refractories Inc., Refractory Materials Intl., Altus Refractories, LLC, Thermatex Sales Corp., Harbison-Walker Refractories Company and Magnesita Refractories Co.

Electricity. In 2017 and 2016 electricity accounted for approximately 9% and 10% respectively, of our consolidated manufacturing conversion cost. Electricity accounted for 9% in 2017 of our manufacturing conversion cost and 9% in 2016 in our Mexico facilities and is supplied by the CFE. It accounted for 8% in 2017 and 12% in 2016 of the manufacturing conversion cost in our U.S. and Canadian operations and is supplied by American Electric Power Company, Nipsco Industries, Inc., New York Power and Ohio Edison. We, like most high volume users of electricity in Mexico, pay special rates to CFE for electricity. Energy prices in Mexico have historically been very volatile and subject to dramatic price increases in short periods of time. In the late 1990s, the CFE began to charge for electricity usage based on the time of use during the day and the season (summer or winter). As a result, we have modified our production schedule in order to reduce electricity costs by limiting production during periods when peak rates are in effect. We cannot assure that any future cost increases will not have a material adverse effect on our business.

Natural Gas. Natural gas (including “combustoleo” fuel oil which is an oil derivative that is less refined than gasoline and diesel fuel oil that can be used instead of gasoline in our Mexicali plant) consisted of approximately 3% of our consolidated manufacturing conversion cost (2% of the manufacturing conversion cost of our Mexican operations and 3% of the manufacturing conversion cost of our U.S. operations) in 2017 and 2016. In previous years we have entered into natural gas cash-flow exchange contracts or swaps where we receive a floating price and pay a fixed price to hedge our risk of from fluctuations in natural gas prices. Fluctuations in natural gas prices from volume consumed are recognized as part of our operating costs. As applicable, we recognized the fair value of instruments either as liabilities or assets. We periodically evaluate the changes in the cash flows of derivative instruments to analyze if the swaps are highly effective for mitigating the exposure to natural gas price fluctuations. At December 31,

2017 and 2016 we did not have natural gas cash-flow exchange contracts or swaps. For the derivatives that qualified for hedge accounting, their fair value was adjusted through the stockholders’ equity under the caption fair value of derivative financial instruments until such time as the related item in the derivative hedges is recognized as income.

We do not enter into contracts for speculation purposes.

Regulation

U.S. and Canadian Operations

Our U. S. and Canadian operations are subject to U.S. and Canadian federal, state and local environmental laws and administrative regulations concerning, among other things the management of, hazardous materials and the discharge of pollutants to the atmosphere and to surface waters. Our U.S. operations have been the subject of administrative action by federal, state (or provincial) and local environmental authorities. The resolution of any of these claims may result in significant liabilities. See Item 3.D. “Risk Factors—Risk Factors Related to our Business—In the event of environmental violations at our facilities we may incur significant liabilities” and Item 8. “Financial Information—Legal Proceedings.”

Environmental Matters

We are subject to a broad range of environmental laws and regulations, including those governing the following:

We monitor our compliance with these laws and regulations through our environmental management system, and believe that we currently are in substantial compliance with them, although we cannot assure you that we will at all times operate in compliance with all such laws and regulations. If we fail to comply with these laws and regulations, we may be assessed fines or penalties or be subject to injunctive relief which could have a material adverse effect on us.

Future changes in the applicable environmental laws and regulations, or changes in the regulating agencies’ approach to enforcement or interpretation of their regulations, could cause us to make additional capital expenditures beyond what we currently anticipate.

Our Lorain, Ohio plant (which is not currently in operation) and our Canton, Ohio facility are subject to the Maximum Achievable Control Technology (“MACT”) standard for Electric Arc Furnaces as an “area source.” Revisions of this standard are under development and, when promulgated, may impose additional restrictions on our Lorain and Canton operations including those relating to mercury emissions and control.

Our steelmaking operations in the United States and in Mexico use electric arc furnaces where carbon dioxide generation is primarily linked to energy use. In the United States, the federal environmental agency has issued rules imposing inventory and reporting obligations to which some of our facilities are subject, and has also issued rules that will affect preconstruction permits for our facilities where increases in greenhouse gas pollutants are contemplated. The U.S. Congress has debated various measures for regulating greenhouse gas emission (such as carbon dioxide) and may enact them in the future. Such laws and regulations may also result in higher costs for coking coal, natural gas and electricity generated by carbon-based systems (such as coal-fired electric generating facilities). Canada’s federal government is also considering various approaches for reducing greenhouse gas emissions, although we do not presently believe Republic’s Hamilton, Ontario facility would be significantly impacted by this efforts since it is not a steel-producing facility. Such future laws and regulations, whether in the form of cap-and-trade emissions permit system, a carbon tax or other regulatory regime may have a negative effect on our operations. Climate change policy is evolving at regional, national and international levels, and political and economic events may significantly affect the scope and timing of climate change measures that are ultimately put in place. As signatories to the UNFCCC, Mexico, the U.S. and Canada became subject to the Paris Agreement to fight climate change, which was taken by the parties at the 21th session of the UNFCCC conference of the Parties in 2015. However, in June 2017, U.S. President Trump stated that the United States would withdraw from the Paris Agreement, but may enter into a future international agreement related to greenhouse gas emissions. In August 2017, the U.S. State Department officially informed the United Nations of the intent of the United States to withdraw from the Paris Agreement. The United States’ adherence to the exit process is uncertain and/or the terms on which the United States may reenter the Paris Agreement or a separately negotiated

agreement are unclear at this time. As a result, some of our significant facilities may ultimately be subject to future regional, provincial and/or federal climate change regulations to manage greenhouse emissions. More stringent greenhouse policies and regulations could adversely affect our business and results of operations.

Various federal, state (or provincial) and local laws, regulations and ordinances govern the removal, encapsulation or disturbance of asbestos-containing materials (“ACMs”). These laws, regulations and ordinances may impose liability for the release of ACMs and may permit third parties to seek recovery from owners or operators of facilities at which ACMs were or are located for personal injury associated with exposure to ACMs. We are aware of the presence of ACMs at our facilities but we currently believe that such materials are being managed in accordance with applicable law.

In the United States, the federal environmental protection agency is developing a new rule that is expected, among other things, to impose a timeline for the phasing out of polychlorinated biphenyl (“PCB”) -containing fluid in equipment that we currently use at many of our U.S. facilities. A preliminary notice regarding this future regulation was published in 2016 for comments, and a formal proposed rule is expected within the next two years. If the rule is enacted as proposed, it will require our facilities to reduce the levels of PCBs in our equipment to less than 50 ppm within 5 years following its adoption, which will in turn require us to incur cost for the removal and disposal of PCB containing oils, sampling and possible replacement of equipment in the event PCB levels cannot be reduced to acceptable levels.

Also in the United States, more stringent standards for particulate matter were promulgated in 2012. As these new more stringent standards were implemented through the different state programs, we experienced higher costs associated with any preconstruction permitting of new or modified sources at our U.S. facilities in 2014 and subsequent years. These costs were related to extensive dispersion modeling and/or pre-construction monitoring not previously required.

Mexican Operations

We are subject to Mexican federal, state and municipal laws, administrative regulations and Mexican Official Rules (Normas Oficiales Mexicanas) relating to a variety of environmental matters, anti-trust matters, trade regulations, and tax and employee matters.

Among other matters, Mexican tax returns are open for review generally for a period of five years, and, according to Mexican tax law, the purchaser of a business may become jointly and severally liable for unpaid tax liabilities of the business prior to its acquisition, which may have an impact on the liabilities and contingencies derived from any such acquisitions. Although we believe that we are in compliance with all material Mexican federal, state and municipal laws, administrative regulations and Mexican Official Rules, we cannot assure you that the interpretation of the Mexican authorities of the laws and regulations affecting our business or the enforcement thereof will not change in a manner that could increase our costs of doing business or could have a material adverse effect on our business, results of operations, financial condition or prospects.

Environmental Matters

We are subject to various Mexican federal, state and municipal laws, administrative regulations and Mexican Official Rules (Normas Oficiales Mexicanas) relating to the protection of human health, the environment and natural resources.

The major federal environmental laws applicable to our operations, among others, are: (i) the General Law of Ecological Balance and Environmental Protection (Ley General del Equilibrio Ecológico y la Protección al Ambiente or “LGEEPA”) and its regulations, which are administered and overseen by the Ministry of the Environment and Natural Resources (Secretaría de Medio Ambiente y Recursos Naturales or “SEMARNAT”) and enforced by the Ministry’s enforcement branch, the Federal Attorney’s Office for the Protection of the Environment (Procuraduría Federal de Protección al Ambiente or “PROFEPA”); (ii) the General Law for the Prevention and Integral Management of Waste (Ley General para la Prevención y Gestión Integral de los Residuos or the “Law on Wastes”), which is also administered by SEMARNAT and enforced by PROFEPA; (iii) the National Waters Law (Ley de Aguas Nacionales) and its regulations, which are administered and enforced by the National Waters Commission (Comisión Nacional de Agua), also a branch of SEMARNAT; and (iv) the Federal Law on Environmental Responsibility (Ley Federal de Responsabilidad Ambiental), which is also administered by SEMARNAT and enforced by PROFEPA.

In addition to the foregoing, Mexican Official Rules, which are technical standards issued by applicable regulatory authorities pursuant to the General Normalization Law (Ley General de Metrología y Normalización) and to other laws that include the environmental laws described above, establish standards relating to air emissions, waste water discharges, the generation, handling and disposal of hazardous wastes and noise control, among others. Mexican Official Rules regarding soil contamination and waste management were enacted in order to protect these potential contingencies. Although not enforceable, the internal administrative criteria on soil contamination established by PROFEPA are widely used as guidance in cases where soil remediation, restoration or clean-up is required.

LGEEPA sets forth the legal framework applicable to the generation and handling of hazardous wastes and materials, the release of contaminants into the air, soil and water, as well as the environmental impact assessment of the construction, development and operation of different projects, sites, facilities and industrial plants similar to the ones owned and/or operated by us and our subsidiaries. In addition to LGEEPA, the Law on Wastes regulates the generation, handling, transportation, storage and final disposal of hazardous waste.

LGEEPA also mandates that companies that contaminate soil be responsible for the clean-up. Furthermore, the Law on Wastes provides that owners and lessors of real property with soil contamination are jointly and severally liable for the remediation of such contaminated sites, irrespective of any recourse or other actions such owners and lessors may have against the contaminating party, and aside from the criminal or administrative liability to which the contaminating party may be subject. The Law on Wastes also restricts the transfer of contaminated sites.

PROFEPA can bring administrative, civil and criminal proceedings against companies that violate environmental laws, regulations and Mexican Official Rules, and has the power to impose a variety of sanctions. These sanctions may include, among others, monetary fines, revocation of authorizations, concessions, licenses, permits or registries, administrative arrests, seizure of contaminating equipment, and in certain cases, temporary or permanent closure of facilities.

Additionally, as part of its inspection authority, PROFEPA is entitled to periodically visit the facilities of companies whose activities are regulated by Mexican environmental legislation, and verify compliance. Similar rights are granted to state environmental authorities pursuant to applicable state environmental laws.

Companies in Mexico are required to obtain proper authorizations, concessions, licenses, permits and registries from competent environmental authorities for the performance of activities that may have an impact on the environment or may constitute a source of contamination. Such companies in Mexico are also required to comply with a variety of reporting obligations that include, among others, providing PROFEPA and SEMARNAT with periodic reports regarding compliance with various environmental laws. Among other permits, the operations and related activities of the steel industry are subject to the prior obtainment of an environmental impact authorization granted by SEMARNAT.

We believe that we have obtained all the necessary authorizations, concessions, general operating licenses, permits and registries from the applicable environmental authorities to duly operate our facilities, plants and sites, and sell our products and that we are in material compliance with applicable environmental legislation. We, through our subsidiaries, have made significant capital investments to assure our production and operation facilities comply with requirements of federal, state and municipal law and administrative regulation, and to remain in compliance with our current authorizations, concessions, licenses, permits and registries.

We cannot assure you that in the future, we and our subsidiaries will not be subject to stricter Mexican federal, state or municipal environmental laws and administrative regulations, or more stringent interpretation or enforcement of existing laws and administrative regulations. Mexican environmental laws and administrative regulations have become increasingly stringent over the last decade, and this trend is likely to continue, influenced recently by the North American Agreement on Environmental Cooperation entered into by Mexico, the United States and Canada in connection with the North American Free Trade Agreement or NAFTA. Further, we cannot assure you that we will not be required to devote significant expenditures to environmental matters, including remediation-related matters. In this regard, any obligation to remedy environmental damages caused by us or any contaminated sites owned or leased by us could require significant unplanned capital expenditures and be materially adverse to our financial condition and results of operations.

Water

In Mexico, the National Waters Law regulates water resources. In addition, the Mexican Official Rules govern the quality of water. A concession granted by the National Waters Commission is required for the use and exploitation of national waters. Some of our facilities in Mexico have a renewable concession to use and exploit underground waters from wells in order to meet the water requirements of our production processes. We pay the National Waters Commission duties per cubic meter of water extracted under our concessions. We believe we are in substantial compliance with all the requirements imposed by each of the concessions we have obtained.

Pursuant to the National Waters Law, companies that discharge waste into national water bodies must comply with certain requirements, including maximum permissible contaminant levels. Periodic reports on water quality must be provided by dischargers to applicable authorities. Liability may result from the contamination of underground waters or recipient water bodies. We believe that we are in substantial compliance with all water and waste water legislation applicable to us.

Antitrust Matters

We are also subject to the Mexican Antitrust Law (Ley Federal de Competencia Económica), which regulates monopolies and monopolistic practices in Mexico and requires Mexican government approval of certain mergers, acquisitions and joint ventures. We believe that we are currently in material compliance with the Mexican Antitrust Law. However, due to our growth strategy of acquiring new businesses and assets and because we are a large manufacturer with a significant share of the markets in Mexico with respect to certain of our products, we may be subject to greater regulatory scrutiny in the future.

Measurements Law

Mexico’s Ministry of Economy (Secretaría de Economía), through the General Rules Department (Dirección General de Normas or “DGN”), promulgates regulations regarding many products that we manufacture. Specifically, pursuant to the Measurements Law (Ley Federal sobre Metrología y Normalización), the DGN issues specifications on the quality and safety standards for our product lines. We believe that all of our products are in material compliance with all applicable DGN regulations.

Trade Regulation Matters

We have experienced significant competition from imports into Mexico in the past as a result of excess worldwide steel production capacity, particularly in periods of economic slowdown, and as a consequence of the Peso’s appreciation, making imports cheaper and more competitive in peso terms. In 2003, imports declined as international market conditions improved and the peso weakened. Recently, the Mexican government, at the request of CANACERO, has taken several measures to prevent unfair trade practices such as dumping the steel import market. The overall climate for imports in Mexico is influenced by the free trade agreements that Mexico has entered into with other countries, as well as the level of tariffs and anti-dumping duties (some of which are described below).

We have benefited from the free trade agreements that Mexico has entered into. Specifically, we have directly benefited from our ability to export finished steel products directly to export markets and compete with similar products manufactured in those markets. We have also indirectly benefited from increased demand from our domestic customers who similarly manufacture their products to foreign markets under free trade agreements. Nevertheless, we cannot assure you that the trade agreements affecting our business or the enforcement thereof will not change in a manner that could have a material adverse effect on our business, results of operations, financial condition or prospects.

North American Free Trade Agreement. NAFTA became effective on January 1, 1994. NAFTA provided for the progressive elimination over a period of ten years of the 10% duties formerly in effect on most steel products imported into Mexico from the United States and Canada, including those that compete with our main product lines. There is currently no duty. Leaders from the United States, Canada and Mexico also commenced discussions regarding NAFTA on January 23, 2018 in Montreal, Canada. After numerous rounds of discussion, there was no progress on divisive issues such as car manufacturing. Tariffs could impact the interconnected supply chain of many industries, including automobiles, and this could potentially harm NAFTA renegotiation talks. Moreover, under the terms of the NAFTA agreement, President Trump has the authority to withdraw from NAFTA with a six month notice. See “Item 3.D. Risk Factors—Risks Related to Mexico—Developments in other countries could adversely affect the Mexican economy, our financial performance and the price of our shares.”

Mexican-European Community Free Trade Agreement. The Mexican-European Free Trade Agreement, or “MEFTA,” became effective on July 1, 2000, and taxes applying to a large quantity of imported goods were eliminated or reduced. The goal of this trade agreement is to establish a bilateral and preferential, progressive and reciprocal framework to encourage the development of trade in goods and services, taking into account the sensitivity of certain products and services sectors, and in accordance with relevant rules of the World Trade Organization (WTO). The Joint Council is responsible for deciding the arrangements and timetable for the liberalization of duties and non-duty barriers to trade in goods, in accordance with the relevant WTO rules.

Mexico-Japan Economic Association (the “Association”). On January 1, 2004, Japan and the other members of the G-7, agreed to reduce the steel tariffs to zero percent, so Mexico has benefited from this rate since such date. However, Mexico is sensitive to the steel exports coming from Japan, so the Association was negotiated in the following terms: (i) the specialized steel that is not produced in Mexico, and that is used to produce vehicles, spare parts, electronics, machinery and heavy equipment, was released from any tariffs, as from the effective date of the Association, (ii) the steel products coming from Japan currently have a zero percent rate, (iii) the products to be imported from the under the programs established by the Association, will pay the tariffs pursuant to the fixed tariffs established in such Sector Programs, so the electronic and vehicles industries will be exempted as of the effective date of the Association.

Other Trade Agreements. In the last several years, Mexico has signed other free trade agreements with Israel (2000), Iceland, Norway, Liechtenstein and Switzerland (2001), and with the following Latin American countries: Chile (1992 and amended in 1999); Venezuela and Colombia (1995); Costa Rica (1995); Bolivia (1995); Nicaragua (1998); Honduras, El Salvador and Guatemala (2001); and Uruguay (2003). We do not anticipate any significant increase in competition in the Mexican steel market as a result of these trade agreements due to their minimal steel production or, in the case of Venezuela and Chile, minimal share of the Mexican market.

Transpacific Partnership Trade Agreement (TPP). On February 4, 2016, Mexico, along with Australia, Brunei, Canada, Chile, United States, Japan, Malaysia, New Zealand, Peru, Singapore and Vietnam, signed the TPP, in the City of Auckland, New Zealand. This treaty will grant Mexican products access to six markets (Australia, Brunei, Malaysia, New Zealand, Singapore and Vietnam) with approximately 155 million of potential consumers, which were not covered by any other trade agreement. The TPP will become effective two years after its signature, provided all 12 participating countries ratify the agreement, or when at least six countries representing at least 85% of the gross domestic product of the TPP ratify the agreement.

The TPP eliminates or reduces tariff and non-tariff barriers across substantially all trade in goods and services and covers the full spectrum of trade, including goods and services trade and investment, so as to create new opportunities and benefits for the businesses, workers, and consumers of the countries members.

The TPP facilitates the development of production and supply chains, and seamless trade, enhancing efficiency and supporting our goal of creating and supporting jobs, raising living standards, enhancing conservation efforts, and facilitating cross-border integration, as well as opening domestic markets.

The TPP promotes innovation, productivity, and competitiveness by addressing new issues, including the development of the digital economy, and the role of state-owned enterprises in the global economy.

The TPP includes new elements that seek to ensure that economies at all levels of development and businesses of all sizes can benefit from trade. It includes commitments to help small- and medium-sized businesses understand the Agreement, take advantage of its opportunities, and bring their unique challenges to the attention of the TPP governments. It also includes specific commitments on development and trade capacity building, to ensure that all Parties are able to meet the commitments in the Agreement and take full advantage of its benefits.

The TPP is intended as a platform for regional economic integration and designed to include additional economies across the Asia-Pacific region.

The President of the United States, Donald Trump, signed an executive order on January 2017 withdrawing the United States from the TPP.

On January 23, 2018, the 11 remaining countries participating in the TPP reached an agreement in Tokyo, Japan. Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore and Vietnam, member countries of the TPP, signed the agreement on March 8, 2018 in Santiago de Chile.

Dumping and Countervailing Duties. We are or have been a party to, or have been affected by, numerous steel dumping and countervailing duty claims. Many of these claims have been brought by Mexican steel producers against international steel companies, while others have been brought against Mexican steel companies. In certain instances, such cases have resulted in duties being imposed on certain imported steel products and, in a few instances, duties have been imposed on Mexican steel exports. In the aggregate, these duties have not had a material impact on our results of operations.

On September 11, 2013, the United States International Trade Commission (USITC) started an official anti-dumping investigation against rebar exports from Mexico and Turkey promoted by Nucor, Gerdau, Commercial Metals, and Cascade Steel Buyer.

On August 14, 2013, the Ministry of Industry and Tourism of Colombia (MIT) started an official safeguard investigation against imports of commercial angles and plates originating from countries that are members of the World Trade Organization (WTO) at the request of DIACO-GERDAU and SIDOC, seeking the imposition of a countervailing duty of 35%.

Brazil operations

We produce according to the technical specifications of the Brazilian standard ABNT NBR 7480:2007 for steel bars and wires designed for the reinforcement for concrete structures. Our products are also registered with the Brazilian National Institute of Metrology, Quality and Technology (INMETRO), in accordance with Resolution CONMETRO No. 05, dated May 6, 2008, and comply with conformity assessment regulations, including Ordinance No. 73, dated March 17, 2010, and with compulsory product certification regulations.

We have received environmental permits from the Sao Paulo State, for which hydrological studies and feasibility of groundwater have been conducted, such permits include a license granted by the Ministry of Environment of Sao Paulo and an operations license granted by the Ministry of Environment CETESBE Sao Paulo State Comnahia.

The chart below sets forth a summary of our corporate structure.

The following table identifies each of our significant operating subsidiaries, including its country of incorporation and our percentage ownership thereof at December 31, 2016:

The U.S. dollar is the functional currency of our U.S. subsidiaries, except Simec 8 International, Inc., Steel Promotor, Inc. and Coadm Steel, Inc., which are not listed above and whose functional currency is the peso. These entities were merged into Simec USA Corp at the beginning of 2015 and, therefore, are no longer in operations. Prior to the merger, these entities recorded uncollected accrued interest for the year ended December 31, 2014 and their main assets and liabilities were accounts receivable and payable to related parties denominated in pesos. These three subsidiaries were previously Mexican entities and in 2014 changed their tax residence to the United States. Prior to the merger but after changing their tax residence to the United States, these entities had minimal operations and, therefore, until 2015 we considered, that their functional currency was the Mexican peso. In 2013, these subsidiaries operated in Mexico and were treated as Mexican subsidiaries.

Our Operations and Production Facilities

We conduct our operations at 13 facilities throughout America. At December 31, 2017, our crude steel production capacity was 4.6 million tons, of which 1.2 million tons were based on an integrated blast furnace technology, and 3.4 million were based on electric arc furnace, or mini-mill, technology. Our Mexican facilities have 2 million tons of crude steel production capacity, operating five mini-mill facilities. Our U.S. operations have 2.1 million tons of crude steel production capacity and our Brazil operations have 0.5 million tons of crude steel production capacity. In addition, we have 4 million tons of rolling and finishing capacity, of which 1.8 million are located in Mexico, 1.7 million are located in the United States and Canada and 0.5 million are located in Brazil.

We operate seven mini-mills, five in Mexico, one in the United States and one in Brazil. The Mexican mini-mills are located in Guadalajara, Jalisco; Apizaco, Tlaxcala; Mexicali, Baja California; as well as two in San Luis Potosí. Our mini-mill in the United States is located in Canton, Ohio. Our mini-mill in Brazil is located in Pindamonhangaba; São Paulo. We also own an integrated blast furnace and an electric arc furnace in Lorain, Ohio and a rolling mill in Lackawanna, New York. Processing mills are located in Massillon, Ohio, Hamilton, Ontario and Solon, Ohio.

Because we operate both mini-mill and integrated blast furnace production facilities, we can allocate production between each type of facility based on efficiency and cost. In addition, as long as our facilities are not operating at full capacity, we can allocate production based on the relative cost of basic inputs (iron ore, coke, scrap metal and electricity) to the facility where production costs would be the lowest. Our production facilities are designed to permit the rapid changeover from one product to another. This flexibility permits us to efficiently produce small volume orders to meet customer needs and to produce varying quantities of standard product. Production runs, or campaigns, occur on four to eight weeks cycles, minimizing customer waiting time for both standard and specialized products.

We use scrap metal and iron ore to produce our finished steel products. We produce molten steel using an electric arc furnace, alloying elements and carbon are added, and which then is transported to continuous casters for solidification. The continuous casters produce long, square strands of steel that are cut into billet and transferred to the rolling mills for further processing or, in some cases, sold to other steel producers. In the rolling mills, the billet is reheated in a walking beam furnace with preheating burners, passed through a rolling mill for size reduction and conformed into final sections and sizes. The shapes are then cut into a variety of lengths. Our facility in Canton, Ohio is capable of producing billets and blooms.

Our mini-mill plants use an electric arc furnace to melt ferrous scrap and other metallic components, which are then cast into long, square bars called billets in a continuous casting process, all of which occurs in a melt shop. The billet is then transferred to a rolling mill, reheated and rolled into finished product. In contrast, an integrated steel mill heats iron pellets and other primary materials in a blast furnace to first produce pig iron, that must be refined in a basic oxygen furnace to liquid steel, and then cast to billet and finished product. Mini-mill plants typically produce certain steel products more efficiently because of the lower energy requirements resulting from their smaller size and because of their use of ferrous scrap. Mini-mills are designed to provide shorter production runs with relatively fast product changeover times. Integrated steel mills are more efficient in producing longer runs and are able to produce certain steel products that a mini-mill cannot.

The production levels and capacity utilization rates for our melt shops and rolling mills for the periods indicated are presented below.

Production Volume and Capacity Utilization

Mexican Operations and Facilities

The following table presents production by product at each of our Mexican facilities as a percentage of total production at that facility for 2017.

Mexican Production per Facility by Product
Location

Guadalajara. Our Guadalajara mini-mill facility is located in central western Mexico in Guadalajara, Jalisco which is Mexico’s second largest city. Our Guadalajara facilities and equipment include one improved electric arc furnace utilizing water-cooled sidewalls and roof, one four-strand continuous caster, five reheating furnaces and three rolling mills. The Guadalajara mini-mill has an annual installed capacity of 370,000 tons of billet and an annual installed capacity of finished product of 480,000 tons. In 2017, the Guadalajara mini-mill produced 343,930 tons of steel billet and 345,824 tons of finished product, operating at 93% capacity for billet production and 72% capacity for finished product production. The Guadalajara rolling facilities process billet production from our Mexicali and Apizaco mills. Our Guadalajara facility is 336 miles from Mexico City. Our Guadalajara facility mainly produces structurals, SBQ steel, light structurals and rebars.

Guadalajara Mini-Mill 

Mexicali. In 1993, we began operations at our mini-mill located in Mexicali, Baja California. The mini-mill is strategically located approximately 22 miles south of the California border and approximately 220 miles from Los Angeles.

Our Mexicali facilities and equipment include one electric arc furnace utilizing water-cooled sidewalls and roof, one four-strand continuous caster, one walking beam reheating furnace, one SACK rolling mill, a Linde oxygen plant and a water treatment plant. This facility has an annual installed capacity of 430,000 tons of steel billet and an annual installed capacity of finished product of 250,000 tons. Excess billet produced at the Mexicali facility is used primarily by the Guadalajara facility. This allows us to increase the utilization of the Guadalajara facility’s finishing capacity, which exceeds its production capacity. In 2017, the Mexicali mini-mill produced approximately 231,198 tons of billet, of which the Guadalajara mini-mill used 29,292 tons. In 2017, the Mexicali mini-mill produced 184,645 tons of finished products. In 2017 we operated the Mexicali mini-mill at 54% capacity for billet production and at 74% capacity for finished product production. Our facility is strategically located and has access to key markets in Mexico and the United States, stable sources of scrap, electricity, a highly skilled workforce and other raw materials. The Mexicali mini-mill also is situated near major highways and a railroad linking the Mexicali and Guadalajara mini-mills, allowing for coordinated production at the two facilities. Our Mexicali facility mainly produces structurals, light structurals and rebar. In 2017, 59% of the products produced at the Mexicali mini-mill were rebar, 19% were angles, 4% were hot rolled bars (round, square and hexagonal rods) and the remaining 18% were channels and flat bar.

Mexicali Mini-Mill

Apizaco mini-mill and Cholula facility. We have operated the Apizaco mini-mill and Cholula facility since August 1, 2004. The mini-mill is located in central Mexico in Apizaco, Tlaxcala. Our Apizaco facilities and equipment include one EBT Danieli electric arc furnace utilizing water-cooled sidewalls and roof, two ladle stations (one Danieli and the other Daido), one Daido degasification station, one Danieli four-strand continuous caster, two walking beam reheating furnaces and two rolling mills (one Danieli and the other Pomini). This facility has an annual installed capacity of 510,000 tons of steel billet and an annual installed capacity of finished product of 492,000 tons. In 2017, the Apizaco mini-mill produced 405,818 tons of steel billet. In 2017, the Apizaco mini-mill produced 367,823 tons of finished products. In 2017, we operated the Apizaco mini-mill at 80% capacity for billet production and at 75% capacity for finished product production. Our Apizaco facility is 1,112 miles from Mexicali and less than 124 miles from Mexico City. Our Apizaco facility mainly produces SBQ steel, light structurals and rebar. Our Cholula facility is approximately 25 miles from our Apizaco facility, which allows the integrated operations of the Apizaco mini-mill and Cholula facility. Our Cholula facilities and equipment include cold drawing and turning machines for peeling bars. This facility has an annual installed capacity of finished product of 120,000 tons. In 2017, the Cholula facility produced 101,958 tons of finished products, at 85% capacity. Our Cholula facility mainly produces cold finished SBQ steel.

In 2017, 37% of the products we produced at the Apizaco and Cholula facilities were hot rolled bars (round, square and hexagonals), 32% were flat merchant bar and 31% were cold finished products.

Apizaco Mini-Mill and Cholula Facility 

San Luis Operations and Facilities. We have operated our San Luis facilities since we acquired them on May 30, 2008. The facilities are located in central Mexico in San Luis Potosí, in the state of San Luis Potosí. Our San Luis facilities and equipment include four electric arc furnaces, three continuous casters, three reheating furnaces, two rebar rolling mills and one wire rod rolling mill. As of December 31, 2017, these facilities had an annual installed capacity of 704,000 tons of billet and 610,000 tons of finished product. In 2017, the San Luis facilities produced 581,128 tons of steel billet. In 2017, the San Luis facilities produced 548,964 tons of finished product, operating at 83% capacity for billet production and 90% capacity for finished product production. Our San Luis facilities mainly produces rebar, light structurals and wire rod. In 2017, 82% of the products produced at the San Luis facilities were rebar, 14% were electro-welded wire mesh, wire rod and electro-welded wire mesh panel, and the remaining 4% were other light structurals.

The following table sets forth, for the periods indicated selected operating data for our San Luis facilities. 

U.S. and Canada Operations and Facilities

We have operated our Republic facilities (in Ohio, New York, Indiana and Canada) since we acquired them from Republic on July 22, 2005. As of December 31, 2017, these facilities had an annual installed capacity of 2,083,000 tons of billet and 1,719,000 tons of finished product. In 2017, Republic facilities produced 453,600 tons of steel billet. For the same period, Republic facilities produced 372,859 tons of hot-rolled bars. Republic facilities produced 58,151 tons of cold finish bars. In 2017, Republic facilities produced 20,684 tons of wire products.

The following table sets forth, for the periods indicated selected operating data for our Republic facilities.

Lorain, Ohio. The Lorain facility operates an integrated steel mill, it has a blast furnace, two 220-ton basic oxygen furnaces, a 150-ton electric arc furnace, two ladle metallurgy facilities, a vacuum degasser, a five-strand continuous bloom caster, a six-strand billet caster, a billet rolling mill and two bar rolling mills.

Our Lorain facility had, at December 31, 2017, an annual installed capacity of 952,000 tons of steel billet and 816,000 tons of finished product. This facility did not produce tons of steel billets and finished steel bars in 2017.

Canton, Ohio. Our Canton facility mainly produces SBQ steel and includes two 200-ton top charge electric arc furnaces, a 5-strand bloom/billet caster, two ladle metallurgical furnaces, two vacuum degassers and two slag rakes. This facility also includes a combination Caster rolling facility that continuously casts blooms in a 4-strand caster, heats the blooms to rolling temperature in a walking beam furnace, then rolls billets through an 8-stand rolling mill in an inline operation. We installed and commissioned the electric arc furnace, the bloom/billet caster, ladle metallurgical furnace and vacuum degasser in 2005. Other Canton equipment includes a Mecana billet inspection line, four stationary billet grinders, a saw line and a quality verification line (or “QVL line”).

Canton produces blooms and billets for the three rolling mills in Republic facilities and for trade customers. We use the QVL inspection line to inspect finished bar produced in Lackawanna and Lorain. As of December 2017, the Canton facility had annual installed capacity of 1,131,000 tons of steel billet. In 2017, this facility produced 453,600 tons of blooms, billets and other semi-finished trade product and was operated at 40% capacity of steel billet.

Lackawanna, New York. Our Lackawanna facility mainly produces SBQ steel and includes a three-zone walking beam billet reheat furnace, a recently upgraded 16 conventional stand mill with a 5 stand sizing mill and two saw lines capable of producing rounds, squares, and hexagons in both cut length and coils. This facility produces hot rolled bar sizes that range from 0.562” to 3.250” with coil weights up to 6,000 lb. Our Lackawanna facility’s finishing equipment includes a QVL inspection line and three saw lines. We sell a portion of the hot rolled bars produced at our Lackawanna facility to trade customers, and we also ship a portion of the finished bars to our cold finishing operations for further processing. As of December 31, 2017, the Lackawanna facility had annual installed capacity of 653,000 tons of hot rolled bars. In 2017, this facility produced 372,859 tons of hot rolled bars and was operated at 57% capacity of finished product.

Massillon, Ohio. Our Massillon facility mainly produces SBQ steel and contains a cold finishing facility which includes the machinery and equipment to clean, draw, turn, chamfer, anneal, grind, straighten and saw bars. Our Massillon facility had, at December 31, 2017, an annual installed capacity of 125,000 tons of finished product. During 2017, the Massillon facility was operated at 26% capacity of finished product and produced 32,296 tons of cold finished bars.

Gary, Indiana. The idled Cold Finish plant in Gary, Indiana was relocated to a fellow subsidiary company in Tlaxcala, Mexico in 2016. This was a turnkey project to design the relocation, de-commission and ship the equipment, install and then re-commission the plant for an all-in cost of Ps. 1,478 million (U.S.$79.2 million).

Solon, Ohio. Our Solon facility, acquired in February, 2011, mainly produce Cold Heading Quality (CHQ) wire products and have wire drawing and finishing facilities that include the machinery and equipment to clean and coat, draw, and anneal wire. As of December 31, 2017, the Solon facility had installed capacities of 65,000, for wire products. During 2017, the Solon facility produced and shipped 20,684 tons of wire products and was operated at 32% capacity of finished product.

Hamilton, Ontario, Canada. Our Hamilton facility mainly produces SBQ steel and has a cold finishing facility which includes the machinery and equipment to clean, draw, turn, chamfer, anneal, grind, straighten and saw bars. As of December 31, 2017, the Hamilton facility had annual installed capacity of 59,000 tons of cold finished bars. In 2017, this facility produced 25,855 tons of cold finished bars and was operated at 44% capacity of finished product.

Pindamonhangaba, Sao Paulo, Brazil.

Our plant is located 140 kms from the city of Sao Paulo, in a town called Pindamonhangaba, State of Sao Paulo and is 218 miles from Rio de Janeiro. Our Brazil facility and equipment include an electric German arc furnace and an Italian rebar and wire rod rolling mill. This plant began operations in July 2015 and currently produces rod. As of December 31, 2017, this plant had installed capacity to produce 500,000 tons of “billet” and 450,000 tons of finished product per year capacity. In 2017 our mini-steel plant in Brazil produced 272,345 tons of “billet” and 272,652 tons of finished product, operating at 54% of its capacity for “billet” and 61% capacity for finished product.

The following table sets forth, for the period indicated selected operating data for our Brazil facility.

The following table shows the products that we produce, the equipment that we use and the volume that we produce in each of our separate production facilities:

Production per Facility by Product, Equipment and Volume

There are no unresolved written comments received from the staff of the U.S. Securities and Exchange Commission (the “Commission”) regarding our periodic reports under the U.S. Securities Exchange Act of 1934, as amended.

The following discussion is derived from our audited consolidated financial statements, which are presented elsewhere in this annual report. This discussion does not include all of the information included in our financial statements. You should read our financial statements to gain a better understanding of our business and our historical results of operations.

Adoption of International Financial Reporting Standards (IFRS)

The Mexican National Banking and Securities Commission (CNBV) has established the requirement that listed companies must disclose their financial information to the public, through the Mexican Stock Exchange (BMV), and therefore, beginning in 2012, we prepare our financial information in accordance with IFRS, issued by the IASB. IFRS differs in certain significant respects from U.S. GAAP. Accordingly, Mexican financial statements and reported earnings are likely to differ from those of companies in other countries in this and other respects.

Overview

We are producers of SBQ and structural steel products. Accordingly, our net sales and profitability are highly dependent on market conditions in the steel industry which is greatly influenced by general economic conditions in North America and globally. The sharp reduction in economic activity and consumer demand in general, and in the automotive, construction and manufacturing industries in particular, in North America starting in the fourth quarter of 2008 has had a significant negative impact on the demand and price levels for all steel products, including SBQ and structural steel products. These economic conditions have had an impact on all parts of our operations since the fourth quarter of 2008. Demand, production levels and prices in certain segments and markets have recovered and stabilized to a certain degree, although the extent, timing and duration of the recovery and potential return to pre-crisis levels remains uncertain. Our net revenue from sales decreased in 2013, compared to 2012, decreased by 23% in the automotive sector, decreased 15% in the independent distributor sector, decreased 33% in the hand tools sector, increased 3% in the mining sector and decreased 13% in other industries. The total decrease in net revenue from sales of SBQ products in 2013, compared to 2012, was 18%. Our net revenue from sales increased in 2014, compared to 2013, increased by 42% in the automotive sector, decreased 13% in the independent distributor sector, decreased 34% in the hand tools sector, decreased 61% in the mining sector and increased 29% in other industries. The total increase in net revenue from sales of SBQ products in 2014, compared to 2013, was 18%. Our net revenue from sales decreased in 2015, compared to 2014, increased by 20% in the automotive sector, decreased 43% in the independent distributor sector, increased 204% in the hand tools sector, decreased 52% in the mining sector and decreased 48% in other industries. The total decrease in net revenue from sales of SBQ products in 2015, compared to 2014, was 16%. Our net revenue from sales decreased in 2016, compared to 2015, decreased by 18% in the automotive sector, increased 9% in the independent distributor sector, decreased 72% in the hand tools sector, decreased 42% in the mining sector and decreased 10% in other industries. The total decrease in net revenue from sales of SBQ products in 2016, compared to 2015, was 13%. In 2017, the total increase in net revenue from sales of SBQ products compared to 2016 was 13%.

As a result of the significant competition in the steel industry and the commodity-like nature of some of our products, we have limited pricing power over many of our products. The North American and global steel markets influence finished steel product prices. Nevertheless, many of our products are SBQ products for which competition is limited, and, therefore, these products tend to generate somewhat higher margins compared with our more commoditized steel products. We attempt to adjust the mix of our product output toward higher margin products to the extent that we are able to do so, and we also adjust our overall product levels based on the product demand.

We focus on controlling our cost of sales as well as our selling, general and administrative expenses. Our cost of sales largely consist of the costs of acquiring the raw materials necessary to manufacture steel, primarily scrap metal and iron ore. Market supply and demand generally determine scrap and iron ore prices, and, as a result, we have limited ability to influence their cost or the costs of other raw materials, including energy costs; however, in 2013, 2014, 2015, 2016 and 2017 we did not purchase iron ore pellets or coke since our Lorain, Ohio blast furnace facility, which is our only facility that utilizes these materials, was idle during these periods. There is a correlation between the prices of scrap and iron ore and finished product prices, although the degree and timing of this correlation varies from time to time, so we may not always be able to fully pass along scrap, iron ore and other raw material price increases to our customers. Therefore, our ability to decrease our cost of sales as a percentage of net sales is largely dependent on increasing our productivity. Our ability to control selling, general and administrative expenses, which do not correlate to net sales as closely as cost of sales do, is a key element of our profitability. Although our revenues and costs fluctuate from quarter to quarter, we do not experience large fluctuations due to seasonality.

Production costs at our U.S. facilities are higher than those in our facilities in Mexico principally due to the higher cost of labor and the higher cost of ferroalloys used to manufacture SBQ steel, which is the only steel product that we produce in the United States.

The negative operating trends in our USA segment are primarily driven by under-utilized production capacity that severely impacts cost. The automotive sector is stable and continues to provide good demand for our products.

Our U.S. subsidiaries have entered into sale agreements with customers and, in order to comply with the terms thereof, any existing orders pursuant to those agreements need to be fulfilled even if the price of raw material increases with time. As the existing sale agreements expire, we will evaluate new agreements which would result in a production of profitable products.

Typically, about 75% of our business uses a fixed base price that is negotiated annually, plus monthly scrap and alloy surcharges. The remaining 25% is transaction business, where we can adjust the base pricing as required. Scrap metal and commodity prices stabilized somewhat midway through 2016, and in 2017 the prices of scrap and other inputs increased significantly. Financial resources will continue to be made available as our U.S. segment tackles the cost curve and restores the business to profitability.

Sales Volume, Price and Cost Data, 2013 - 2017